Used Safeline Metal Detector for sale (35,185)

Year of construction: 2001, operating hours: 33,733 h, condition: ready for operation (used), General Data Measurements width 4400 mm // 6100 mm Measurements depth 3300 mm // 2100 mm Measurements height 2800 mm // 3000 mm Machine weight 6055 kg // 9000 kg Media Power consumption 11 KW Kodpfex Sz Exjx Ah Nsdg It's a Sawing & Drilling Machine system. These MEBA 560 DG-1000 and PEDDINGHAUS TDK 1000 /9P were manufactured in 2001. It features a metal band saw with a cutting capacity of 90°: Round 560 mm, Flat 1000×560 mm. The saw blade dimensions are 9300×54×1.6 mm, and it operates with a cutting speed of 18 to 95 m/min. The drilling machine has 9 drill Spindles, 3 per axis. Consider the opportunity to buy this Sawing & Drilling Machine system. Contact us for more information about this machine. Application Types Sawing

Condition: new, Year of construction: 2026, sheet thickness steel (max.): 4 mm, back gauge: 1,000 mm, CIDAN EVO DUO metal shear is the strongest mechanical shear on the market, with a capacity to handle sheet thicknesses from 0.5 mm to 4.0 mm in the same machine (applies to EVO DUO 32). EVO DUO is a powerful built guillotine shear equipped with two (DUO) gearmotors that distribute power and load optimally. The CIDAN EVO DUO metal shear is available in two lengths, 3200 mm and 4100 mm. The machine is well equipped as standard with a lot of features that creates a perfect working environment that meets the greatest demands on efficiency and ergonomics: Kdedpfxom Nbq Rs Ah Nog Blade gap adjustment Sheet support – supports the material during the cut, as standard designed for return to sender. As option with delivery to the rear side of the machine. Pneumatic hold-down beam that enables gentle handling of softer materials, such as aluminum. The distance from the hold-down beam to the cutting line is less than 35 mm, which minimizes the material waste. Flexible table with T-groove rails for table pans, fixed and adjustable angular stops and support arms that can be rearranged and replaced. EVO DUO guillotine shear can be equipped with a 750 or 1000 mm programmable back gauge with CutLink finger touch control. The back gauge is a fast and accurate positioning system with many interesting functions that facilitate the handling of the sheet metal. CIDAN shear EVO DUO fits well with the CIDAN philosophy of low environmental impact, as the machine has low energy consumption, a very low noise level and is designed for maximum usability.

Condition: new, Year of construction: 2026, The CIDAN MFB is an easy-to-use manual folding machine with a compact size and low weight. This allows you to take this practical assistant anywhere and quickly and effortlessly bend sheet metal directly in your work vehicle or on the construction site. This machine meets the same high standards as our quality machines, which we have been manufacturing for our customers in this industry for over a hundred years. It is a robust machine, built for longevity. Supported by our customer service, it represents an excellent folding solution now and for the future. To meet today’s demanding and fast-paced working environment, it is sometimes essential that tasks can be performed on-site, by anyone, and without lengthy training. With this manual folding machine, you can reduce lead times and also minimize the risks that may occur during the process from production to the customer. Make: CIDAN Kedpfx Aema H Hmjh Nsdg Model: MFB 1270 Capacity: 1.5 mm at 400 N/mm² Working width: 1270 mm Weight: 390 kg Features: - Segmented upper and lower tooling - Manual back gauge - Tool box or The new CIDAN MF is an easy-to-use manual folding machine, compact in size and lightweight. This makes it possible to take this practical device anywhere and bend sheet metal quickly and simply, whether in your work vehicle or directly at the construction site. This machine maintains the same high standards as our quality equipment, which we have been building for customers for over a century. The manual folding machine is extremely robust and designed for long-term operation. Thanks to its intuitive controls, the machine is immediately ready to use and delivers precise results. It enables efficient work, regardless of location or operator experience. This ensures you can work effectively and reliably without wasting time on extensive training or adjustments. Make: CIDAN Working length: 2040 mm Steel* (400 N/mm²): 0.6 mm Stainless steel* (600 N/mm²): 0.5 mm Aluminum* (200 N/mm²): 1.0 mm Weight: 140 kg

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, Demonstration Machine Cidan MF - Manual Folding Machine The new CIDAN MF is a user-friendly manual folding machine with a compact size and low weight. This allows you to take this practical assistant anywhere and bend sheet metal directly in your construction vehicle or on site quickly and effortlessly. This machine meets the same high standards as our quality machines, which we have been manufacturing for our customers in this industry for over a hundred years. The manual folding machine is extremely robust and designed for long-lasting use. Thanks to its intuitive operation, this machine is immediately ready for use and delivers precise results. It enables efficient work, regardless of location or the operator’s experience. You can work efficiently and reliably without losing time on extensive training or setup adjustments. Kdodpfox Ngf Ssx Ah Njg Manufacturer: CIDAN Working length: 2040 mm Steel* (400 N/mm2): 0.6 mm Stainless steel* (600 N/mm2): 0.5 mm Aluminium* (200 N/mm2): 1.0 mm Weight: 140 kg For more information: cidanmachinery.com

Condition: new, Year of construction: 2026, CIDAN F folding machine is fast, user-friendly and reliable. The new construction is robust with welded sides, extra strong lower beam and clamping beam. The generous 150 mm opening height and the generous beam openings allow greater flexibility. The folding beam comes in three different widths, offering the best result for any profile and material, with keyholes for fast changes. The strong but compact folding beam makes the operator’s work easy and the entire process is speeded up as the clamping beam opens before the folding beam is back in place. Choose a CIDAN F folding machine and you choose work of joy and productivity in a perfect combination. Ksdsm Tv D Uepfx Ah Nsdg - Fast, user-friendly and reliable. - Adjustable crowning for perfect folding results regardless of length and material thickness. - Two folding beam rails as standard, 7/10 mm and 15 mm. - 8–16 gauging rails depending on back gauge type and working length. Click here to read more about our back gauges. - Choose between three different control systems: EasyLink, nuLINK or ProLink W.

Year of construction: 2026, condition: new, ----- NEW MACHINE ---- QUALITY PRODUCT MADE IN EUROPE ---- METAL SEPARATOR EDDY CURRENT WITH VIBRATION FEEDER AND MAGNET-DRUM - For the separation of IRON, ALUMINIUM, COPPER etc. - for grain sizes 3 to 300 mm - machines with a feeding width from 500 mm to 1500 available - 14 poles or 24 concentric drum depending on application - durable PVC or RUBBER belt conveyor depending on application - with electric cabinet - with 2 x frequency inverter for speed adjustment of the conveyor and separation drum - RAL color according to the customer´s choice Kjdpfxsx Szkhe Ah Nodg - manufactured in the EU with CE-Certificate - new machine with 1 year warranty DELIVERY TIME APPROX. 4 MONTHS

Condition: new, Year of construction: 2026, · NON FERROUS METAL SEPARATOR EDDY CURRENT · For the separation of aluminium and copper · Width 500 mm · 14 poles concentric drum · Durable PVC belt conveyor · With electric cabinet, with 2 pieces of frequency inverters for speed adjustment of conveyor and separation drum · RAL color according to the customer´s choice · New machine manufactured in the EU Kedpfx Aex Szh Hjh Nedg

Condition: new, Year of construction: 2026, · NON FERROUS METAL SEPARATOR EDDY CURRENT · For the separation of aluminium and copper · Width 500 mm · 14 poles concentric drum · Durable PVC belt conveyor · With electric cabinet, with 2 pieces of frequency inverters for speed adjustment of conveyor and separation drum · RAL color according to the customer´s choice Kjdex Szbaspfx Ah Njdg · New machine manufactured in the EU

Year of construction: 2026, condition: new, ----- NEW MACHINE ---- QUALITY PRODUCT MADE IN EUROPE ---- METAL SEPARATOR EDDY CURRENT WITH VIBRATION FEEDER AND MAGNET-DRUM - For the separation of IRON, ALUMINIUM, COPPER etc. - for grain sizes 3 to 300 mm - machines with a feeding width from 500 mm to 1500 available - 14 poles or 24 concentric drum depending on application Kodpfxjx Sza Ae Ah Njdg - durable PVC or RUBBER belt conveyor depending on application - with electric cabinet - with 2 x frequency inverter for speed adjustment of the conveyor and separation drum - RAL color according to the customer´s choice - manufactured in the EU with CE-Certificate - new machine with 1 year warranty DELIVERY TIME APPROX. 4 MONTHS

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: electric, Simple machine for longitudinal and cross cutting in the thickness range of 0.40 to 0.80 mm and width up to 1250 mm. Specification: - The machine is equipped with 6 pairs of knives and can be divided into 7 strips, with a minimum strip width of 60 mm (manual adjustment). Cutting length tolerance ≤±2.0 mm. Automatic control of quantity and cutting length. - Knife material: Cr12, precision processing, heat treated. Kdedpfex U Exhsx Ah Nsg - Power: 4 kW. Electrical standard: 380 V/50 Hz/3 PH - Control voltage: 24 V - Components include: PLC (Siemens), touch screen (Siemens), frequency inverter (Schneider), encoder (Omron), etc. - Option to add a mechanical or automatic decoiler.

Condition: used, Swivel bending machine KRAMER type A-Maut. II 1000 No. 48 287 Year of construction 1990 Ksdpfx Aofnabyoh Nodg effective length 1060 mm max. sheet thickness 3.75 mm Stroke of upper beam 180 mm Adjustability of the folding beam 60 mm Backgauge 480 mm Drive power of folding beam drive 4 kW Drive power upper beam drive 1.5 kW Mains connection 400 Volt, 50 Hz - Manual and semi-automatic control - Angle adjustment via angle preselection disk - one-piece pointing rail 135° - backgauge with hand crank adjustment and simple measuring scale - Continuous fence rail - Electric foot switch, 3-position Space requirement L x W x H 2200 x 1350 x 1500 mm Weight approx. 2.3 tons good condition

Condition: used, functionality: fully functional, total length: 500 mm, total width: 440 mm, total height: 230 mm, overall weight: 26 kg, power: 1.69 kW (2.30 HP), input frequency: 50 Hz, input voltage: 400 V, type of input current: three-phase, Edge Milling Machine for Metal Brand: Marpol Rasant Ksdex U D Afepfx Ah Nodg Suitable for deburring and beveling metals (e.g., steel, aluminum, brass), plastics, etc. Used, fully functional Bevel angle: 45° Continuously adjustable bevel Maximum bevel: 8 mm x 45° Cutter equipped with carbide indexable inserts Guide rail length: 400 mm 2-speed motor, Speeds: Level 1: 1420 rpm Level 2: 2840 rpm Motor power: 1.7/2.3 HP Connection: 400 V, 3-phase Weight: 26 kg Required space (L x W x H): 500 x 440 x 230 mm The machine can be inspected and tested under power. The machine is being sold due to the upcoming closure of the business (retirement). We also have further offers online.

Condition: excellent (used), functionality: fully functional, Timesavers 22 Series 1100-WBB 1st Station: Abrasive belt for pre-grinding, ideal for removing burrs, laser scale, etc. Optionally, the abrasive belt can be switched to a Scotch-Brite/non-woven belt to achieve a surface finish on the parts. Easy belt change in under a minute thanks to quick-change system. The belt speed is continuously adjustable. 2nd & 3rd Station: Disc brushes for edge rounding, two stations in sequence with both left and right rotation for optimal results. Eccentric mechanism enables lateral oscillation of the disc brush stations (can be switched on or off). Easy brush change using the quick-change system. Disc brush speed is continuously adjustable. Conveyor belt speed is steplessly adjustable. Working width: 1100 mm Maximum part thickness: 100 mm Kdjdpfxex Uwlao Ah Nsg The machine is fully operational and can be inspected and tested under power on site.

Condition: used, functionality: fully functional, Year of construction: 2022, Folding machine Schröder MAKU 3200 for sale Condition: The machine is fully functional and suitable for professional sheet metal processing. Manufacturer: Schröder (Germany) Model: MAKU 3200 Robustly built, precise, and reliable motorized folding machine designed for accurate bending of various types of metal sheets. Technical specifications: Working length: 3200 mm Bending thickness (max): 1.5 mm Back gauge travel: 1000 mm (motorized) Control system: Classic bend (CNC/electronic control) Folding beam tools: 10 mm and 25 mm Year of manufacture: 2022 If you have further questions, we will be happy to answer them. Kdjdpjx Sdpgjfx Ah Nog

Condition: used, Year of construction: 1985, Offer 25425 Technical Data - Motor-driven top roll: 175 x 30 mm - Bottom rolls free-running: 250 x 50 mm - Top roll adjustable via handwheel - Top roll diameter: 175 mm - Bottom roll diameter (each): 250 mm - Throat depth: 1100 mm - Distance from base plate to bottom roll: 1520 mm Kdjdpfxex T Urhj Ah Njg - Drive: 400 V - Required space approx. W 900 x H 2650 x D 2000 mm - Weight approx. 1500 kg

Condition: ready for operation (used), Year of construction: 2007, Manual light metal circular saw Metallkraft LMS 400 - Working condition Kjdpfxsx Tz R Dj Ah Nodg - Year of manufacture: 2007 - Spare saw blade included - Can be tested on-site under power - Shipping via freight company available at extra cost - On-site loading with forklift - Invoice with VAT included

Condition: excellent (used), Year of construction: 1995, loading capacity: max. 40 Kg. disc outside diam. 650 mm Kdedpfx Ahoi T Ir Ae Njg bundle outer diam. max. 600 mm bundle innert diam. 170 - 310 mm bundle width: max. 200 mm

Condition: good (used), Year of construction: 2009, machine/vehicle number: 10014344, Offer 25481 Technical Data: - Saw blade diameter up to 350 mm - Saw blade feed via hand lever - Maximum opening width of pneumatic vice: 205 mm - Cutting capacity with saw blade diameter 350 mm: - at 90° round: 120 mm Kodpfx Asx Tqnfjh Nsdg - square: 110 mm - flat up to 200 x 90 mm - or 140 x 110 mm - at 45° round: 100 mm - flat: 100 x 100 mm - Mitre adjustment: left up to 45°, right up to 45° and 30° - 2 saw blade rotational speeds: 17 and 34 rpm - Drive: 400 V / 1.4 / 1.9 kW - Air connection: 6 - 8 bar - Micro-spray coolant system - Space requirement approx.: W 850 x H 1750 x D 950 mm - Weight approx.: 400 kg

Condition: used, Z-conveyor, conveyor belt with metal slat belt GÖSSLING Metal belt conveyor, belt conveyor, stationary conveyor Machine No.: 15867 Year of manufacture: 2005 Usable length: 3100 mm Kodpewvv Rwjfx Ah Nedg Belt width: 400 mm Frame profile height: 70 mm Insertion width: 465 mm Lower insertion length: approx. 1500 mm Conveyor incline length: approx. 800 mm Upper discharge belt length: approx. 600 mm Height offset: approx. 170 mm Belt speed: approx. 22 m/min. Conveying height - discharge height: approx. 1220 to 1390 mm Insertion height: approx. 1050 to 1270 mm Belt drive motor output: approx. 0.37 kW Power supply: 400 Volt, 50 Hz - Metal slat chain made of stainless steel - Belt drive via NORD gear motor - Robust sheet steel construction - Height adjustable via hydraulic lift in the base - Mobile on fixed castors Required floor space L x W x H: 3160 x 750 x ... mm Weight: 420 kg Good condition

Year of construction: 2014, condition: used, Manufacturer: Mettler Toledo Model: ADV3BF Year: 2014 Type: X-ray detector Power supply: 230 V Power: 2.3 kW Weight: 460 kg Conveyor length: 150 cm Conveyor belt width: 30 cm Product height allowed : 5 cm (adjustable) Product input : Flange DN 20 / Ø ext. 235 mm (removable) Height with flange: 1505 mm Height without flange: 1225 mm Kjdpsx R D Aqjfx Ah Nsdg Product output: 380 mm and 700 mm

Year of construction: 2020, condition: good (used), Remmert LaserFLEX | Fully Automatic Loading and Unloading – Used - : Price ex location: now only €119,000 (net), previously €145,000 (net) plus dismantling, etc.! Manufacturer: Remmert Model: LaserFlex Year of manufacture: approx. 2020 Sheet format: 3015 Load capacity: 1,000 kg 220 kg/m² Maximum sheet dimensions: 3048 x 1524 mm Maximum sheet thickness: 25 mm SMART Control 4.0 Can be combined with a sheet metal storage system (storage system not included in the sale) Kjdpfowga E Tjx Ah Njdg Original price: €250,000 (net) Manufacturer description: Equipped with two automation units – a loading unit and an unloading unit – the LaserFLEX allows for the decoupling of loading and unloading processes in laser cutting systems. After cutting, a fork unit lifts the processed metal sheet from the change table, while simultaneously a new sheet is transported from the connected storage system via a vacuum unit. As soon as the sheet is positioned next to the laser machine, the system is loaded with the workpiece by the unloader. This entire process takes just one minute. With LaserFLEX, the downtime of integrated laser cutting systems is virtually eliminated, even high-speed laser processing is optimally supported. Key features: • Changeover times of approx. one minute (with 3015 format) • Highly automated production processes • Separate loading and unloading operations for the laser cutting machine • Manufacturer-independent integration of laser systems • Flexible storage options with tower or large-scale storage systems • Reduced downtime of the processing machine • Connection of multiple laser systems in a chained layout • Integration into existing warehouse and production environments • Intuitive, graphical touch operation with visual status management • Modern industrial design Fast, flexible solution for the automation of laser systems Increased productivity in laser processing Fastest sheet changeover time on the market Seamless integration into existing production environments Handling of any sheet formats Effective supply and removal for multiple laser systems Intuitive, graphical touch operation with visual status management Innovative, modern industrial design Condition: Good Available: Immediately Location: 46419 Isselburg

Condition: good (used), beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp Kdodovgv Apjpfx Ah Njg -Manufacturer: Stahl Süssen, Sheet metal clamp: Lifting clamp type SGK -Clamping range: 0-20 mm -Load capacity: 1000 kg -Dimensions: 190/75/H285 mm -Weight: 6.9 kg

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, plate gripper, lifting claw, lifting clamp, lifting clamp, crane clamp, roller clamp -Manufacturer: VEB TAKRAF, roller clamp type WSI -Clamp range: 35-70mm -Load capacity: 2000 kg -Dimensions: 620/210/235 mm -Weight: 21 kg Kdedpfx Ajir E Thjh Neg

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting clamp type IPSUNZ 6t with swiveling support ring Ksdpjkm Rn Isfx Ah Njdg -Clamp range: 32-64 mm -Load capacity: 6 t -Number: 4x clamps available -Price per piece -Dimensions: 310/100/H420 mm -Weight: 24 kg/pc.

Condition: used, metal band saw blade, band saw blade, metal saw band -Manufacturer: Eyltool, metal band saw M42 unused -Type: M42 2060x20x0.9 ZpZ 8/12 -Number: 10x metal saw band available -Price per piece -Transport dimension: Ø 230 / 40 mm -Weight: 0.3kg/pcs Kdedeikbruspfx Ah Neg