Used Runge Frame for sale (9,200)

Year of construction: 1979, operating hours: 10,968 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Werk-Nr. 8725, INFORMATION REGARDING SALES AND CONTRACT CONDITIONS: Dkjdpfx Aezgr Iqsl Aju MACHINE CONDITION: This ESTERER frame saw, model LSH 65, was in impeccable operational use until three years ago and remains serviceable. The equipment includes both a stationary control panel in front of the saw frame and a mobile control panel on the tensioning carriage. A hydraulic tensioning device for adjusting the saw blades in horizontal and vertical directions is mounted on the frame. The electric motor drive with gearbox is included in the offer. HANDOVER AND PRICE: Handover will take place after full payment of the purchase price. The price is ex foundation and is payable on-site directly to the seller after conclusion of the contract and prior to dismantling. WARRANTY: The seller assumes no warranty, neither before nor after handover of the machine – sold as seen. The buyer has no right of withdrawal. DISMANTLING: Complete dismantling, including lifting gear, tools, and transportation, is the responsibility of the buyer. Handover of the machine shall take place on-site. Any damage caused to the building during dismantling will be repaired by the buyer or charged separately. The purchase transaction will be mutually confirmed by means of a sales contract.

Year of construction: 1961, condition: ready for operation (used), A hydraulic single-column C-frame press Müller is available. Press force: 63t, stroke: 560mm, throat depth: 325mm, installation height: 700mm, table dimensions X/Y: 640mm/640mm, ram surface: 560mm/560mm, machine dimensions X/Y/Z: approx. 2000mm/1200mm/3100mm, weight: approx. 7500kg. The machine has a motor malfunction. An on-site inspection is possible. Dkodpey Rtg Eofx Al Aeu

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, height adjustment type: hydraulic, input voltage: 380 V, passage height: 230 mm, We are offering these two refurbished Wintersteiger DSG 150 ECO frame saws, year of manufacture 2004. Machine type: DSG 150 ECO Voltage: 380 V Power: 11 kW each Dkedpfx Ajydfgcol Aou Included free of charge is a Tensionmaster for crowning the blades and a set of blades valued at €2,000. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Special milling pantograph for children's bed legs. Dksdpfx Aley S Acle Asu Pedal head movement, pneumatic workpiece movement.

Condition: used, functionality: unexamined, Rated voltage 380V, 15A Grinding motor 5.5 kW Feed motor 0.37 kW Grinding belt width 200 mm Grinding belt length 1800 mm Pneumatic connection 6 bar Feed speeds 6 / 11 / 16 m/min Dkjdoznv Uwopfx Al Aou Electric table height adjustment Belt air blast Dust extraction connection 140 mm

Condition: excellent (used), 0.75 kW motor Working height: 205 cm Working length: 300 cm Working width: 8 cm Dkodpfx Aljzu Ndre Aou 4 upper clamping jaws 2 lateral clamping jaws

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, overall weight: 950 kg, Sanding belt length 2200 mm, sanding belt width 400 mm, table length 1200 mm, usable height 120 mm, sanding width 390 mm, sanding belt speed approx. 21 m/sec, feed speeds 6 - 11 - 16 m/min, main drive motor 7.5 kW, feed motor 0.26 - 0.55 - 1 kW, pneumatic belt oscillation and belt air-blast, frame support, chassis. Dsdpoxq Ehxjfx Al Aoku

Condition: ready for operation (used), functionality: fully functional, Glass rack, type A: loading capacity 2500 kg, own weight 220 kg. For glass dimensions: 2460x1050x2200 mm (external height, including hook for crane loading: H2600). Dsdpfsz Abbfex Al Aoku Approximately 60 units available.

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with adjustable angle. Special drilling machine for staircase construction, window construction and universal applications through pneumatic height adjustment. Angled dowel drilling and picket drilling can be easily performed using the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Precision chuck with two inserts, 16 mm and M10 thread Table size approx. 1100 x 240 mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowel drilling on two levels without retooling The desired drilling heights can be set for each drilling level using a handwheel and digital counter; switching then takes place pneumatically from the front Cross adjustment approx. 320 mm, stepless or in a 12 mm grid Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, can be positioned at the front and rear of the table 2 swiveling workpiece supports 2 side stops, can also be used as a front support Undercarriage Dust extraction connection 80 mm 4 used but good drills 9, 12, 16, 19 mm Few paint spots have been touched up, very good condition, see original photos. A used swiveling elongated hole drilling machine in this condition is rarely available. Dedpfx Aoyfta Tjl Aoku CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200 mm (L x W x H), weight 310 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse, see "other offers from this supplier".

Condition: good (used), Year of construction: 1990, functionality: fully functional, ORMA Hydraulic Frame Presses DE 30/18 Manufacturer: Orma Machine Italy Year of manufacture: 1990 Maximum working dimensions: 3000 x 1800 mm Maximum working depth: 90 mm Vertical pistons: 2 Maximum piston pressure: 2000 kg Horizontal pistons: 2 Motor: 0.55 kW Width = 850 mm Length = 3700 mm Height = 2310 mm Features: Robust frame Easy adjustment and adjustment of the orthogonality and parallelism of the cross members Working accuracy Easy locking and control of the double-acting pistons Installation for small workshops and for assembling and aligning various components such as doors, windows, louvre doors and windows, simple frames, etc. The pistons are oil-driven. Dedpfx Asv Iv Sgel Aoku

Year of construction: 1999, condition: excellent (used), functionality: fully functional, EWD gang saw line with edger and stacking system Complete cutting line from gang saw infeed to finished stacked lumber. The system includes automatic gang saw infeed, cutting with a high-performance EWD gang saw, material transfer, automatic edger, and a fully automatic stacking and packaging system. Technical specifications Dkodpfszvyn Dex Al Aeu Cutting lengths: 2,500–6,000 mm Frame width: 710 mm Clearance height: 700 mm Saw stroke: 600 mm Gang saw speed: up to 320 rpm EWD H38 gang saw infeed EWD high-performance gang saw, type GDZ/GE 600 Main drive: 160 kW Hydraulic blade tensioning for up to 25 saw blades Heckel extraction and conveying technology Automatic edger, type FR 9 WD, with two movable sawing units Cross-cutting system as well as centering and feed system with pre-measuring Two fully automatic stacking and packaging systems Output up to 24 boards per minute per stacking system Automatic layer formation, spacer insertion, and package transfer

Condition: used, Second-hand machine Second-hand pneumatic frame press from Maweg MNo.: 7004124588 Pressing area: Length approx. 3500 mm / Height approx. 2450 mm 2 horizontal press cylinders 3 vertical press cylinders Availability: by arrangement Location: Röllbach Dsdszk Nwkepfx Al Aoku

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, Equipment: CE marking, TECHNICAL SPECIFICATIONS Maximum mounting hole dimensions: 3500 x 2500 mm Dkedpeznv A Uefx Al Asu Minimum mounting hole dimensions: 250 x 350 mm Vertical cylinders: 2 pcs, ø 65/40 mm, stroke 1300 mm Total lifting capacity of vertical cylinders: 7.4 tons Horizontal cylinders: 2 pcs, ø 50/30 mm, stroke 1500 mm Total lifting capacity of horizontal cylinders: 2 tons Hydraulic unit 1.5 kW *The maximum size of the workpiece will be smaller than the maximum operating range of the press, depending on the type of joint (dovetail or pin) and the method of positioning the workpiece in the machine (pre-assembled or unassembled). PRESS DESCRIPTION • 3 positions for the lower beam • Pressure is adjusted directly from the hydraulic unit using a knob; the current pressure is displayed on an indicator during operation. • All electrical components are manufactured in accordance with European standards; each component has a code corresponding to the marking on the electrical diagram. • Hydraulic unit with a pump in an oil bath for better noise reduction and lubrication. A 1.5 kW motor is installed on the oil tank. • The rack and pinion system allows for precise movement of the upper beam. • The supporting structure is made of welded iron elements, Fe 430 grade. • Control panel: - Button for vertical movement of the beam - Button for vertical clamping - Button for opening the horizontal clamping corners - Button for horizontal clamping of the corners - Additional button for two-handed activation of the press functions Warranty: 12 months on spare parts

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, The machine is fully operational and in good condition. Working dimensions: 3200 x 2200 mm Dkedpjxmr Rxjfx Al Aju Dimension adjustment is electrically controlled from the control panel. Powered by a hydraulic unit.

Condition: excellent (used), functionality: fully functional, Well-maintained W&D gate-type press, model GXW 71 VH. Frame width 710 x 710 mm. Stroke 500 mm. Infinitely variable hydraulic feed. Hydraulic cylinder lift with adjustable cylinder pressure. Drive. Saw attachment. Electric remote control. Clamping carriage and wedge with electric adjustment. Djdpfxszz Iu Ae Al Asku From a small operation. Also interesting as a source of spare parts.

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: 1102, I will sell a TENON spacer frame bender. It has a Polish menu, the bender is in very good condition, in constant use. It has a Polish menu. Dodpfx Alewp Szle Asku

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Hydraulic Frame Press HESS LUX 2000 The machine is fully operational and in good condition Dksdsxl Dv Dspfx Al Aou Maximum working dimensions: 4300 x 2600 mm 3 top and 3 side cylinders Electric dimension adjustment from the control panel.

Condition: excellent (used), functionality: fully functional, Complete sawing frame for EWD Esterer gate, type HDN 600 or HDS 600 with width adjustment. Includes Jansen double-yoke tensioner. Dodpezn Uv Hjfx Al Asku Lightly used. Ideal for keeping spare parts in stock.

Condition: good (used), Year of construction: 2007, functionality: fully functional, load capacity per storage section: 11,500 kg, total length: 390,000 mm, total height: 7,000 mm, total width: 1,000 mm, shelf height: 7,000 mm, support length: 2,700 mm, shelf length: 51,300 mm, load capacity: 1,000 kg, load capacity per stand: 11,500 kg, frame height: 7,000 mm, load per truss pair (max.): 3,000 kg, frame width: 85 mm, axle spacing: 2,700 mm, mesh size: 2,700 mm, number of shelf rows: 7, pallet spaces: 1,845 euro pallets, construction width: 27,003,600 mm, For sale is a comprehensive used pallet racking system, predominantly from STOW, with additional sections from Link 51 and Allclick. The system has already been completely disassembled, sorted, and is ready for loading at any time. Negotiable price: €32,000 net Dsdpfxszugtds Al Ajku The offer includes: STOW 95 pcs. frames, height 7,000 mm, depth 1,000 mm 720 pcs. beams, length 2,700 mm Load capacity approx. 1,000 kg per pallet STOW 20 pcs. frames, height 7,500 mm, depth 1,000 mm 114 pcs. beams, length 3,600 mm Load capacity approx. 1,000 kg per pallet LINK 51 17 pcs. frames, height 7,500 mm, depth 1,000 mm 120 pcs. beams, length 2,700 mm Load capacity approx. 1,000 kg per pallet ALLCLICK 8 pcs. frames, height 7,200 mm, depth approx. 1,000 mm 95 pcs. beams, length 3,600 mm Load capacity approx. 640 kg per pallet Total: 140 pcs. racking frames 1,049 pcs. beams Also available: Back panel mesh covering an entire row of racking approx. 51,300 mm length × 7,000 mm height Impact protection various racking accessories The entire system was documented with photos, videos, and drone footage before disassembly. The racking system has already been completely dismantled and can be loaded or picked up at any time. Inspection and loading are possible by arrangement. Partial sale or sale of individual systems or larger sub-sets is possible by agreement.

Condition: excellent (used), functionality: fully functional, Working width 3200 mm year of manufacture 1992 motor power 7 kW Djdpfjypg Rmsx Al Ajku pressing time adjustment automatic opening emergency stop switch - pull cord

Condition: used, Year of construction: 1988, usedmake Hesstype Hydro-Spezialyear of construction 1988cylinder horizontal 2working width 3550 mmworking height 2350 mmpressing depth 100 mmweight approx. 2000 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery as seen,without guarantee and warranty Dodpfjvwfw Djx Al Ajku

Condition: used, Kieselgur-Frame 600x600 stainless steel Material: AISI 304 suitable for Seitz Orion A60 and B60 40mm complete with Djdpoz Ia Rtofx Al Ajku 2 plastic shoes gaskets optional Manufacturer part number: Fs 60485

Condition: used, Year of construction: 1977, Wurster and Dietz GDZ 600 GES Year of construction 1977 Passage: 71 cm stroke: 600 mm with swing frame with water-cooled guides with hydraulic saw clamp Jansen with riving knife with saw blades with templates with fence Dodpfjqpdi Ujx Al Asku immediately available Location: Austria, near Klagenfurt

Condition: used, Year of construction: 2026, Base frame for Fortuna roll presses, mobile or stationary Dsdjz A Sntspfx Al Ajku Suitable for Fortuna automatic roll presses and other manufacturers (Fortuna semi-automatic, fully automatic, size 3/4) With heavy-duty, low-profile rollers or, depending on requirements, designed for stationary use With threaded mounting holes Made of solid stainless steel plate

Condition: good (used), Code: 0040 Brand: BREVETTI MOTTA - ITALY Model: VELOX - CE Standard Dkjdov Am Ibjpfx Al Asu Pneumatic joining machine for wooden frames and Mdf , of furniture, doors, windows and various - CE Standard Technical data: Joining unit NR Workable rod dimensions: Max width mm 120 - Max height mm 70 - Min width mm 5 - Min height mm 5 Possible hourly production 150/200 finished frames Compressed air 6 bar Overall dimensions mm 500 x 680 x 1250 h Weight kg 75