Used Round Bending Machine for sale (65,459)

Condition: new, functionality: fully functional, Year of construction: 2025, throat depth: 400 mm, warranty duration: 24 months, Model: GB-4016E Bending pressure (KN): 400 Bending length (mm): 1600 Distance between columns (mm): 1320 Maximum opening height (mm): 430 Slider stroke (mm): 180 Throat depth (mm): 400 X-axis stroke (mm): 400 X-axis speed (mm/s): 400 Gsdpewzqx Hefx Af Usbi R-axis stroke (mm): 140 R-axis speed (mm/s): 200 Z-axis stroke (mm): 1040 Z-axis speed (mm/s): 400 Machine power (kw): 17.2 Dimensions (mm): 2090*1265*2290 Weight (kg): 3500

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR Gbsdpfxetrd T Ts Af Uei 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: good (used), Faceplate bending machine, profile bending machine, bending machine, angle bending machine, pipe bending machine -Diameter of faceplate: 1330 mm -Clamping disc diameter: 775 mm -For an additional charge: other round shapes can be produced Gbodofg Th Aspfx Af Uei -Geared motor power: 1.5 kW -Speed: 86 rpm -Dimensions: 2440/1330/H1400 mm -Weight: 1420 kg

Condition: used, Year of construction: 1997, tube diameter / mm wall strength / mm bending radius min. / mm CNC wire bending machine ROBOMAC 206 General information Machine designation: ROBOMAC 206 Manufacturer: LATOUR / NUMALLIANCE (France) Machine type: CNC wire bending machine / wire forming machine Year of manufacture: 22 December 1997 Serial number / registration: 9711026 CE marking: present Gbjdpfx Afeyt R Sio Uoi Weight Machine weight: approx. 4000 kg Working range Wire diameter: approx. 2 – 6 mm Material feed: wire from coil (ring) Bending heads: 2 bending heads Max. wire strength: approx. 600 N/mm² Mechanical data Feed length / feed arm: approx. 600 mm Tools: interchangeable tools for different wire diameters Control: automatic wire bending control Machine dimensions (approx.) Machine depth: approx. 2000 mm Machine height: approx. 1720 mm Electrical power Electrical connection: approx. 6.3 kVA Typical areas of application - Wire bending parts - Wire hangers - Metal hooks - Springs - Technical wire moulded parts for industrial applications Disclaimer All information is provided without guarantee. No liability is assumed for the accuracy, completeness and up-to-dateness of the technical data.

Condition: excellent (used), Year of construction: 1992, Shaft diameter: 40 mm Bending capacity: Flat bar edgewise at 500 mm Ø: 60 x 10 mm Flat bar flatwise at 400 mm Ø: 100 x 15 mm Square bar at 500 mm Ø: 35 mm Angle iron, leg outwards at 450 mm Ø: 50 x 50 x 6 mm Angle iron, leg inwards at 600 mm Ø: 50 x 50 x 6 mm T-section, T outwards/inwards at 600 mm Ø: 60 x 60 x 7/50 x 50 x 6 mm Round bar at 500 mm Ø: 35 mm Shaft speed: 7.5 rpm Electrical connection: 380 V, approx. 1.7 kW Space requirement: 910 x 640 x 1400 mm Weight: approx. 480 kg Gedjx Anpvepfx Af Uobi

Condition: used, Electric drive Cycle initiation via foot switch Various tools included in the scope of delivery: Godpfxsythzue Af Usbi 1 x upper/lower blade with 4 mm radius 1 x upper/lower blade with 6 mm radius 1 x upper/lower blade with 7 mm radius 1 x upper/lower blade with 8 mm radius 1 x upper/lower blade with 9 mm radius 1 x upper/lower blade with 15 mm radius (currently installed)

Condition: good (used), functionality: fully functional, Year of construction: 1997, Used profile bending machine from Sahilner Model: PK 40 Shaft diameter: 40 mm 3 driven rolls Gedpfx Aoytb Afjf Uebi Including various tools Year of manufacture: 1997

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: 925307, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: roundo, number of rollers: 3, input current: 380 A, input frequency: 50 Hz, Equipment: CE marking, emergency stop, hardened rollers, Roundo R5S used condition , working 100% . Base in Thailand . Gsdpfxsyqxmvj Af Uebi

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, control type: manual, Maximum bending length: 2000 mm Maximum sheet thickness: 1.5 mm Godpfx Afeyr Rcfs Uebi Segmented upper bending edge. Manual adjustment of the bending angle up to the stop. Bending: manually operated Manually adjustable rear stop. Weight: 990 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Max. bending diameter: Ø 76 mm Max. pipe wall thickness: 3.0 mm Max. bending length: 6000 mm Min. bending angle: 0.1° Max. bending angle: 190° Max. bending radius: 260 mm Operating speed Rotation speed: 200°/second Bending speed: 30°/second Feed speed: max. 1000 mm/second Tolerances: Rotation (°): ±0.1° Bending (°): ±0.1° Gjdpfx Afsyr N Ers Uobi Feed (°): ±0.1° Hydraulic system: Hydraulic motor power: 7.5 kW Max. hydraulic pressure: 180 bar Hydraulic oil: 120 liters Rated power: 44 kW Voltage: 400 V AC Dimensions L x W x H: 8900 x 1200 x 1850 mm Weight: 4850 kg Description: Materials: Steel | Stainless steel | Aluminum | Brass | Copper and other flexible materials for simple to complex shapes Display: Portable 15-inch color touchscreen monitor Control panel: Servo and hydraulic motion control, plus selectable servo axis speed Foot pedal User-friendly AKYAPAK control software Hydraulic system: Bosch, Parker Operating modes: Manual, semi-automatic, and fully automatic Programming: Y-B-C or X-Y-Z mode Cooling system: Hydraulic oil cooler Pipe clamp: Hydraulic Industrial PC: Pentium processor, 256 MB RAM, hard drive, and floppy disk drive Lubrication system: Automatic Control: PLC-based Rotary axis: Servo-controlled Bending system: Hydraulic Auxiliary axes: Hydraulic Forward and reverse movement: Manual Pipe length calculation: Automatic, according to program Workpiece display: 3D 360° graphic display

Condition: used, 1 piece CNC wire bending machine ROBOMAC 206 with various accessories, as per photos and inspection. Colour: grey/red. Condition: used. Storage location: production hall / right side. Payment method: advance payment by bank transfer. Shipping: Collection only – shipping is not offered for this item! Gjdpfxjyr H Nhj Af Usbi

Condition: new, Year of construction: 2025, HEAD CORNER ROUNDING MACHINE Gsdskx Hp Eepfx Af Ujbi MAGRAF RA-1

Year of construction: 2001, condition: ready for operation (used), overall weight: 3,750 kg, total height: 1,600 mm, product length (max.): 4,700 mm, number of axes: 6, General Data Machine weight 3750 kg Measurements height 1600 mm Main Drive Gjdox Hbk Rjpfx Af Uebi Number of axis 6 Bending length 3000 mm Dimensions Machine Length 4700 mm This 6-axis PEDRAZZOLI Bend Master 42 MRV IMS CNC was manufactured in 2001. It features a max tube diameter of 42 mm, a min tube diameter of 6 mm, and a max bending radius of 270 mm. With a power of 22 kW and a bending length up to 3000 mm, consider the opportunity to buy this PEDRAZZOLI Bend Master 42 MRV IMS CNC roll bending machine. Contact us for more information about this machine. Application Types Bending

Year of construction: 2004, condition: used, functionality: fully functional, Machine for cutting and 2D bending of aluminium tubes with a wall thickness of 7 and 8 mm. Godpfx Aeyt Sp Njf Ujbi

Condition: excellent (used), Year of construction: 2013, controller manufacturer: ELFRAN Digital Read Out, number of rollers: 3, shaft diameter: 130 mm, overall weight: 5,800 kg, total length: 2,200 mm, total width: 2,400 mm, total height: 2,000 mm, Profile bending machine FACCIN - RCMI 130 MACH-ID 9451 Make: FACCIN Type: RCMI 130 Control: ELFRAN Digital Read Out Year: 2013 3 rolls driven 2 lateral guide rolls Digital readout for position rolls Set hardned universal rolls Set hardned profile rolls Horizontal and vertical:|Horizontal and Vertical Shaft Ø: 130mm Number of rolls: 3 Gsdsyrq Dvspfx Af Uobi Capacity flat: 240 x 30 x 1000mm Capacity Tube: 140 x 5 x 1500Ø x mm Capacity bar: 80 x 80 x 900mm Capacity T-Profile: 140 x 15 x 1400mm Capacity HEA-Profile: 160 x 1700mm Working speed: 0 - 6000mm/min. Side supports: 2 x Hydraulic side arms Length: 2200mm Width: 2400mm Height: 2000mm Weight: 5800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Gbedpfx Afjhmmfko Usi Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, functionality: unexamined, usable tank capacity: 620 l, RÖSLER R 620 EURO Vibratory Finishing Machine Gbsdpoyt Hmcofx Af Uei Manufacturer: RÖSLER Model: R 620 EURO Vibratory Finishing Machine RÖSLER R 620 EURO Bowl Vibrator Industrial vibratory finishing machine / bowl vibrator by RÖSLER, model R 620 EURO, for surface treatment of metal components. This machine is used for deburring, edge rounding, smoothing, and polishing of workpieces and is especially suitable for batch processing in industrial and toolmaking applications. Processing is carried out using media and compound in a vibratory finishing process. Manufacturer: RÖSLER Model: R 620 EURO Machine type: Bowl Vibrator / Vibratory Finishing System Working vessel: approx. 620 liters Applications: Deburring Edge rounding Polishing Surface finishing

Condition: used, functionality: unexamined, usable tank capacity: 780 l, Manufacturer: RÖSLER Model: RM 780 EURO RÖSLER RM 780 EURO Vibratory Finishing Machine (Rotary Vibrator) Industrial vibratory finishing machine / rotary vibrator from RÖSLER, model RM 780 EURO, designed for surface treatment of metal parts. The machine is used for deburring, edge rounding, smoothing, and polishing of workpieces and is particularly suitable for series processing in industrial production and toolmaking. Gjdpfeyt Hkbox Af Ujbi Processing is carried out with abrasives and compound using the vibratory finishing process. Manufacturer: RÖSLER Model: RM 780 EURO Machine type: Rotary Vibrator / Vibratory Finishing System Working container: approx. 780 liters Application: - Deburring - Edge rounding - Polishing - Surface finishing

Condition: used, Year of construction: 2011, Press capacity approx.: 360 kN Bending length approx.: 1020 mm Distance between side frames: 932 mm Effective open height: 295 mm Throat depth: 150 mm Working speed: 25 mm / sec feeding speed: 220 mm / sec Control: TASC 6000 Working hours machine: 41422 h working time jacking beam: 4713 h Length: 1805 mm Width: 1330 mm Height: 2380 mm Weight of machine approx.: 2600 mm Godpfx Afeyrf Dko Ujbi Standard configuration Machine - Stable machine frame - Optimized in terms of deformation - Highly-dynamic electro-mechanical direct drive (torque motor) - Inductive linear measurement system with temperature compensation - Switch cabinet air-conditioning- Ergonomic Machine designBack Gauge System - Highly-dynamic safety backgauge system - Gauge fingerControl - Integrated Machine controller TASC 6000 - Numerical workshop programming - Windows XPe, Pentium M with 1.1 GHz clock frequency - 1 GB RAM memory - 15 " Touch screen - Network capability - TeleserviceSafety - Safety doors, can be swung sideways - Rear cover - 2-button footswitch, for seated or standing operationOptions for ergonomy - Comfort supporting table (front)- Comfort foot rest - LED work area lighting, front - Operating unit, swivel-mounted - 1 shelf bracket and 2 document repositoriesOptions for productivity - BendGuard (with block laser) - Graphic workshop programming - Automatic tool clamps Extended machine accessories Extended Machine Accessoires Backgauge System - Backgauge system 6-axes Automation

Condition: good (used), Technical data: 2 hydraulically adjustable rollers 3 driven rollers Roller diameter: 225 mm Gedpfsytyf Sox Af Ujbi Shaft diameter: 75 mm Round steel: diameter 50 mm Square steel: 45 x 45 mm Flat steel: 200 x 20 mm Angle steel: 75 x 15 mm Bending speed: 7 m/min Motor power: 4 kW Machine can work horizontally or vertically Dimensions (L x W x H): approx. 1200 x 1100 x 1200 mm Weight: approx. 1.3 t Accessories: various tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are appropriate for its age; used machines are sold without any warranty.

Year of construction: 2017, condition: ready for operation (used), An asymmetrical three-roll plate bending machine MG is available. Working width: 2000mm, roller diameter: 130mm, max. plate thickness: 3mm, power: 6kW, weight: approx. 2000kg. An on-site inspection is possible. Gedpfeyttwbjx Af Usbi

Year of construction: 1987, condition: ready for operation (used), A three-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible. Gedpfxeyttv Re Af Ujbi

Condition: excellent (used), Year of construction: 2008, Technical data: Working width: 3100 mm Bending capacity: 16.0 mm Gbjdpfxsytr Rms Af Uoi Pre-bending: 12.0 mm Top roll diameter: 310 mm Center roll diameter: 320 mm Side roll diameter: 240 mm Conical bending device via tilting of both side rolls Hardened rolls Mobile control panel with digital display Motor power: 15 kW CE marking Dimensions (L x W x H): approx. 5100 x 2100 x 1800 mm Weight: approx. 12.5 t The seller is not liable for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1997, functionality: fully functional, Equipment: documentation/manual, LiSEC, BSV-30/K + A1RL Autom. Frame Bending Machine BSV-45NK + Desiccant Filling Machine for Bent Spacer Frames Year: 1997. Processing of aluminum profiles. Bending tools included. Gbedpeytrvvjfx Af Usi Connection: 3/N/PE-50 Hz, 400 V, (BSV-30/K = 5,5 kW + A1RL = 1,1 kW) In good technical condition. Inspection is possible by appointment. Available: NOW

Year of construction: 2026, condition: new, functionality: fully functional, Technical data: Working width: 2540 mm Maximum sheet thickness: 2.5 mm Maximum bending angle: 135° Gbodpfx Aeytparjf Usi Length: 2880 mm Width: 1020 mm Height: 1450 mm Weight: 1300 kg Delivery to the customer is possible. The delivery cost is determined individually according to the quotation of the transport company. If you are interested in other machines, we encourage you to visit our website.