Used Rotary Shaper for sale (4,132)

Condition: used, Year of construction: 2001, 1 unit of CLEMENS TK 150 disc harrow Weight: approximately 450 kg, serial number: 006013 Color: as shown in the pictures, see pictures and inspection Lodpszlcybjfx Aftjrp Year of manufacture: 2001 Condition: used

Condition: like new (used), Year of construction: 2024, On behalf of the customer: €12,150 Technical data: - Engine - Mitsubishi - Power 18.5 hp - Cylinders 3 - Bore / Stroke 70/78mm - Displacement 900cc - Rated speed 2700 rpm - Max. torque 55 Nm at 1600 rpm - 7-pin socket - Hydraulics - Automatic depth control Yes - Lift position control Yes - 3-point linkage, Category 1 - 1 double-acting control valve at the rear Ledpfx Afszb Aguoterp - Lifting capacity on the lifting balls 590kg - Brakes Disc brakes, dry - Parking brake - Transmission 6F + 2R - Transmission Mechanical, sliding mesh - Speeds - Min. driving speed 1.24 km/h at 2700 rpm - Max. driving speed 18.5 km/h at 2700 rpm - PTO - 540, 900 rpm Mechanical - Steering system Power steering - Dimensions and weights - Total weight 625 kg TÜV (technical inspection) - valid until 05/2027 - The vehicle is two years old. The Fieldtrac has been used very little and therefore has very few operating hours. The vehicle is in very good condition, both technically and visually. The first service has already been carried out, so nothing stands in the way of immediate use. The offer includes a rear-mounted forklift including accessories, including: Grapple bucket - Soil tiller 95 cm, used only once!! Original wheel set with AS tires Thanks to the various tire options, the vehicle can be used flexibly. The Fieldtrac impresses with its robust design, high maneuverability and versatile applications. Ideal for farms, agriculture, and equestrian facilities. Highlights at a glance: - Little used / few operating hours - First service already carried out - Rear-mounted forklift with accessories - Very well-maintained condition Location: at the customer's location - immediately available - Sold on behalf of the customer.

Condition: new, Year of construction: 2025, Compact design Highest reliability High suction power Integrated pre-separator 100% air recirculation, residual dust content < 0.1 mg/m³ Low noise emission Extended filter service life Easy emptying Supplied ready for connection with rotary valve Models with rotary valve: AL-KO POWER UNIT® 300 ZRS Suction nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volume flow: 4,900 m³/h / 6,000 m³/h Nominal volume flow: 5,089 m³/h Negative pressure: 2,280 Pa Ljdjhkzu Ajpfx Aftorp Filter area: 30 m² Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Rotary valve capacity: 15,816 L/h Weight: 920 kg Location: In stock at warehouse 54634 Bitburg - immediately available - Subject to prior sale

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003585 - Manufacturer Code: 205367 - Condition: As new (showroom item) - Functionality: Fully functional - Compatible machine: - If interested, we offer an overhaul service, please contact us. 1KG - 20X20X20 Ledpfx Afsyrn Ufotsrp

Condition: excellent (used), Year of construction: 2016, 445 USED Miwe Roll-in e+ oven, TXXL. IMPORTANT: Extended trolley (height 190 cm). Lrodpezk Iplefx Aftop We also have trolleys for these ovens. Year of manufacture: 2016. EXTERNAL DIMENSIONS (in cm): - W: 154, - D: 160, - H: 256. EQUIPMENT: - Gas burner. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: excellent (used), Rotary table, manufacturer: Walter Type: RT 630 MP Heidenhain digital display Resolution: degrees-minutes-seconds Clamping surface diameter: 630 mm Height in horizontal position: 180 mm Height between centers in vertical position: 460 mm Motor: 400 volts, 1300 rpm Rotary table speed: 1.37 rpm Transport dimensions: Length: 1050 mm Width: 500 mm (with pallet: 800 mm) Height: 1220 mm Lrjdpfx Aezk A U Ajftsp Weight: 915 kg

Condition: used, Year of construction: 1980, workpiece diameter 600 mm workpiece weight 400 kg workpiece height 300 mm total power requirement 35 kW Ljdpfx Aot Abrwefterp weight of the machine ca. 4500 kg

Year of construction: 1980, condition: used, table length 2000 mm table width 1800 mm table load 12,5 t total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. m Table size approx. 2,000 x 1,800 mm Max. weight of workpiece, approx. 12,500 kg Table travel, longitudinal 1,250 mm Table height above floor 920 mm Longitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/min Longitudinal quick feed 2,000 mm/min Turning quick feed, with Ø 1,000 mm 3,150 mm/min Weight of machine 7,500 kg External dimensions of machine 3,700 x 2,100 x 920 mm Total electrical load 10 KW - 180 V - 50 Hz Accessories / Special Features Lrsdpfx Ast Hwq Reftsp * Telescopic covers for the guides. * Infinitely variable table feed. * Optical display for setting and reading the longitudinal adjustment. * Optical display for setting and reading the angle. Condition : Satisfactory to good. Machine can be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest.

Condition: used, Year of construction: 1969, rotary table diameter 1000 mm grinding height 500 mm grinding head - power requirement 15/5,5 kW total power requirement 30 kW Ljdpfx Aou Su Apefterp weight of the machine ca. 18 t dimensions of the machine ca. m S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990 _____ Max workpiece Ø 1,000 mm Max. height of workpiece, approx. 400 mm Mounting height under grinding spindles approx. 500 mm Grindable Bore Ø, approx. 50 – 900 mm Max. Workpiece weight approx.. 900 kg Distance between Table bore and column 1.150 mm Table Ø / Face plate Ø, approx. 1,000 mm Table speeds, hydraulic, infinitely variable, right/left 5 – 60 rpm Table/workpiece infeed, 5 steps 0.0025 – 0.025 mm/stroke Table stroke approx. 500 mm Distance between grinding spindle and machine body 600 mm Surface Grinding Head Ø (Segmented wheel) 450 mm Grinding slides stroke, max. 500 mm Grinding slide speeds, infinitely variable 0.2 – 1 m/m Max. Internal Grinding spindle Ø 140/100 mm Grinding cup wheel Ø, up to approx. 200 mm Motor for Surface Grinding 15 kW / Motor for Internal Grinding Spindle 5,5 kW Total electrical load, approx. 30 kW - 380 V - 50 Hz Weight, approx. 18,000 kg Accessories / Special Features • The rotary table carries the workpiece and is also actuating the automatic grinding infeed • The relevant Grinding head can be swivelled in by turning the Column (hydraulic lift) so the workpieces can be ground in one setting with exact angles. • Built-on magnetic face plate, Ø approx. 1,000 mm, with 5 T-slots and stepless adjustment for the magnetism • Automatic workpiece infeed, with automatic depth stop. • Separate Height adjustment of internal grinding head, Grinding spindle Ø 100 mm. • Dressing devices mounted on each grinding head, Separate Switch Cabinet and hydraulic unit, • No Coolant Device available This machine is ideal for grinding bulky and heavy workpieces like housings, gears (!) bearing rings, cylindrical knives, etc. Condition: Good. Machine can be inspected soon under power Delivery : Ex stock as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 15995729164, spindle speed (min.): 24,000 rpm, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, overall weight: 3,400 kg, controller manufacturer: Siemens, controller model: 840D, workpiece length (max.): 2,340 mm, workpiece width (max.): 1,650 mm, workpiece height (max.): 2,500 mm, 2013 DMG Mill Tap 700 Made in Germany. Lrsdpfszmggnex Aftep Equipped with below options 24000rpm spindle, 25 tool station (5th Axis) LEHMANN EA-507 CNC Rotary Table Production package TSC 20bar Chip conveyor Renishaw probe OMP 60 + OTS tool setter Main Spindle needs repair Technical Specifications Year of Manufacture: 2013 Control Unit: Siemens 840D Solution line X-Axis Travel: 700 mm Y-Axis Travel: 420 mm Z-Axis Travel: 380 mm Table Size: 840 x 420 mm (Max load: 400 kg) Spindle Taper: BT 30 / BBT 30Spindle Speed: 24,000 rpm Tool Changer (ATC): 25-station pick-up system Rapid Traverse (X/Y/Z): 60 / 60 / 60 m/min Machine Weight: Approx. 3,400 kg Overall Dimensions: 1,650 x 2,340 x 2,500 mm Included Accessories / Equipment pL LEHMANN EA-507 CNC Rotary Table (5th Axis) with complete cabling/integration.

Condition: like new (used), Year of construction: 2021, machine/vehicle number: B440, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, rotational speed (max.): 300 rpm, rotational speed (min.): 60 rpm, Equipment: CE marking, rotational speed infinitely variable, OMAC B440 3600 VX Hygienic Rotary Lobe Pump Unit – Fully ATEX Rated – 2021 Complete hygienic rotary lobe positive displacement pump unit by O.M.A.C. S.r.l. (Italy), professionally decommissioned from an INEOS manufacturing facility. Fully matched ATEX drivetrain — pump, gearbox and motor all Category 2G (Zone 1) rated, suitable for installation in hazardous area environments. Suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Ready to install. Pump: Manufacturer: O.M.A.C. S.r.l., Italy Model: B440 3600 VX Lrjdpfx Aszmgdaeftop Year: 2021 Wetted parts: AISI 316L stainless steel Connections: 4" (DN100) hygienic tri-clamp ATEX: II 2G Ex h T4 Gb Gearbox: Motovario HR 101M helical reducer Ratio: i = 4.88 Torque: 530 Nm ATEX dual-rated Motor: Cemp E3AB70 132M-4 — 7.5 kW 400V Δ / 690V Y, 1462 rpm ATEX: Ex db IIB T4 Gb IP55, IE3 efficiency Inverter-rated (S9 variable speed duty, PTC 120°C thermal protection) Pump shaft speed approx. 300 rpm at 50Hz (approx. 60–300 rpm range on inverter) Complete unit mounted on a stainless steel baseplate with forklift access. 3 identical units available — matched factory batch with consecutive serial numbers across pump, gearbox and motor. Price is per unit. Condition: New other. Excellent, clean condition throughout — see photos. Inspection welcome prior to purchase. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Year of construction: 2015, condition: excellent (used), Rotary valve: JKF type:B-500S (dosing/mixing unit - 3 Pcs.) Device for dosing/mixing EPS polystyrene granulate and regranulate or other similar products. Rotary valves type B-S are fitted with an 8-bladed rotor with hard-wearing rubber blades bolted to the rotor shaft plate profiles. Lrsdpoumkm Sjfx Aftep The rotor is separated from the rotor housing by felt ring. The shaft is suspended on bearings and connected directly to the gear motor. The rotor is made of 2 mm plate. Year of production: 2008, 2008, 2015

Condition: refurbished (used), Year of construction: 2008, machine/vehicle number: D 2319867, overall weight: 176 kg, total length: 930 mm, total width: 550 mm, total height: 450 mm, volume flow: 129 m³/h, power: 6.7 kW (9.11 HP), input frequency: 50 Hz, rotational speed (max.): 1,740 rpm, Becker KDT 3.140/0-400 dry-running rotary vane compressor / displacement pump For sale is a Becker KDT 3.140/0-400 dry-running rotary vane compressor / blower, manufactured in 2008, in general overhauled, used condition. The compressor operates dry and uses self-lubricating vanes made of graphite composite. This eliminates the need for oil changes and reduces maintenance requirements. Technical data according to the nameplate: Manufacturer: Becker Model: KDT 3.140/0-400 Machine No.: D 2319867 Year of manufacture: 2008 Power: 6.7 / 8.2 kW Frequency: 50 / 60 Hz Speed: 1450 / 1740 rpm Ledpfstpgxzex Aftsrp Volumetric flow: 129 / 153 m³/h Operating pressure: 1500 mbar / 1.5 bar Weight: approx. 176 kg Dimensions: approx. 930 × 550 × 450 mm

Year of construction: 2022, operating hours: 9,500,000 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 4131.05/22, -Bograma BSR 550 Servo with pallet feeder -Cylinder heater -Registration mark reader -Interface box for controlling an external vacuum valve -Stack delivery STA 550BK for a maximum of 9 sheets -Performance: 12,000 sheets/hour, 165 m/min -Minimum format: 210 x 297 mm Lrsdpfx Afjzl Skpjtep -Maximum format: 550 x 750 mm

Condition: excellent (used), Year of construction: 2006, 433 USED Miwe Roll In 6010 oven. Year of manufacture: 2006. EXTERNAL DIMENSIONS (in cm): - W: 172, Ledpfx Ajzki Ntoftsrp - L: 152 (with hood: 230), - H: 256. EQUIPMENT: - Gas burner, - 4 trolleys 58x78 or 58x98 with baking trays for each oven. NOTE: We have a large stock of trolleys and baking sheets 58x78 cm and 58x98 cm for these ovens. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: excellent (used), CATALOGUE NUMBER 8011 TECHNICAL SPECIFICATIONS - Max. height of workpiece: 150 mm - Max. width of workpiece: 1300 mm - Top-mounted unit with 6 brushes - Adjustable unit (up/down) - Star-shaped arrangement of grinding units, rotating - Smooth adjustment of brush rotation speed - Smooth adjustment of belt feed speed via a frequency inverter - Smooth adjustment of brush unit rotation speed - Belt feed: 0.75 kW - Brush motor: 6 x 1.5 kW - Unit rotation motor: 0.75 kW - Vacuum table - Vacuum pump: 7.5 kW - Diameter of dust extraction outlet: 3 x 120 mm - Pump dimensions: 1200 x 1000 x 1650 - Overall dimensions (L/W/H): 2000 x 2500 x 2100 mm Lrsdezkhdcepfx Aftjp - Weight: approx. 3000 kg ADVANTAGES - Width: 1300 mm - Vacuum pump - Rotating unit - German manufacture - Used grinder, very good condition Net price: 29,900 PLN Net price: 7,120 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 2023, machine/vehicle number: ET195, Used adhesive labeling machine PE labelers overhauled up to 6000 BPH Complete transformation from a mechanical machine to an electronic machine Lredpfx Asvlnv Ejftjp Used rotary labeler overhauled up to 6000 complete replacement of the head with new plates, motors, boards, and double jacks for optical centering replacement of groups with 3 new adhesive groups PE labeler or PackLab type. complete overhaul of the glue group for the l-shaped seal for the PE labelers review of seal stretching pliers new electrical panel new complete and CE standard protections for the PE labelers installation of the touchscreen and plc control panel new certifications for Used labeler rotary machine overhauled up to 6000 a bottle passage format for the Used adhesive labeling machine overhauled up to 6000 composed of: auger entry/exit star counter star 11. one seal format per glue group for adhesive rotary labeling up to 6000 complete with: 1 warehouse 3 blades 1 hook drum Delivery time equipment of the Used adhesive labeling machine overhauled: This PE labeler can be serviced and delivered in approximately 90 working days from the order and payment of the first deposit. It is important to approve all technical drawings and label measurements for the PE labelers. This allows orders for replacement materials for the PE labelers to be prepared in an efficient time. In this particular historical period, we encounter very long delivery dates for electrical materials. Is for this reason that it is very important to plan the entire project in the correct direction to avoid wasting time for the PE labelers overloaded. For the installation of the PE labelers we only use our own direct workers, to give safety to our customers. We follow the entire process from start to finish and to the commissioning of the new or used machinery.

Condition: good (used), Welding rotary device, container rotary device, welding rotary device, welding rotary device, welding device, welding rotary table, welding rotary device, gearbox, spur gear gearbox, bevel gearbox -Manufacturer: Guso, welding rotary device, container rotary device on a solid base frame -Load capacity: kg -Control: with hand terminal, foot pedal and digital speed setting -Three-jaw chuck: Forkardt Ø 400 mm, three-jaw chuck bore Ø 140 mm -Speed: 0-1 1/3 rpm Right/Left rotation -Axles: 1 piece Lsdpjzkfuljfx Aftjrp -tiltable: No -Height adjustment: Yes -Base frame: without adjustable feet -Transmission: switchable 2 stages -Manufacturer Sawa- Gearbox type CUSII260/720-S -Translation: 1:6375, 1:1530 -Input shaft: Ø 30 mm -Output shaft: Ø 170 mm -Transport dimensions: 2390/1110/H1520 mm -Weight: 2700 kg

Condition: good (used), Welding rotary device, container rotary device, welding rotary device, welding rotary device, welding device, welding rotary table, welding rotary device, gearbox, spur gear gearbox, bevel gearbox -Manufacturer: Guso, welding rotary device, container rotary device on a solid base frame -Load capacity: kg -Control: with handheld terminal and foot pedal -Three-jaw chuck: Ø 400 mm, three-jaw chuck bore Ø 130 mm -Speed: 0-2 1/4 rpm Right/Left rotation -Axles: 1 piece -tiltable: No -Height adjustment: Yes -Transmission: switchable 2 stages -Manufacturer Sawa- Gearbox Type -Translation: 1:1000, 1:2508 Lrsdpfx Aszkfr Deftjp -Input shaft: Ø 28 mm -Output shaft: Ø 135 mm -Transport dimensions: 2070/1430/H1520 mm -Weight: 1880 kg

Condition: new, Year of construction: 2025, Rotary Blades Model: LINDNER Type: MICROMAT Year of Manufacture: 2025 New / Ready for Use 1. Blade 43x43x20 2pcs (KR) Lrodsxn Nyaopfx Aftop 2. Blade 43x43x20 2pcs (K8) 3. Blade 43x43x23 1pc (KR) 4. Blade 43x43x23 2pcs (K8) We manufacture replacement blades and spare parts for crushers and shredders. Please specify the blade type when ordering.

Condition: new, Year of construction: 2025, Rotary Blades Model: WEIMA, GROSS, VECOPLAN Type: WL, WLK, GAZ, VAZ Year of Manufacture: 2025 Ljdpoxw Nrbefx Afterp New / Ready for immediate use 1. Blade 40x40x25 M12 (PC) 2. Blade 40x40x25 M12 (KR) 3. Blade 40x40x25 M14 (KR) 4. Blade 40x40x20 M12 (KR) 5. Blade 40x40x16 M10 (KR) We manufacture replacement blades and spare parts for crushers and shredders. Please specify the blade type when ordering.

Condition: new, Year of construction: 2025, Rotary Blade Model: LINDNER Type: ANTARES Year of Manufacture: 2025 New / Ready for Use We manufacture replacement blades and spare parts for crushers and shredders. Please specify the blade type when ordering. Lsdpfx Aoxn Nvhjftjrp

Condition: good (used), Year of construction: 2013, Hein Luxrotor rotary furnace - used - year of manufacture 2013 - for sheet metal 58 x 98 - electric - total power approx. 70 kW - computer control with touchscreen - fume hood with fan - ceramic wall - 1 trolley - trolley top locking system Lredpfx Aezly Ezsftsp - technical condition good / device inspected and cleaned - collection from warehouse - price on request

Condition: good (used), load capacity: 3,000 kg, Protec Reiss welding rotator, optionally with a perforated table, size as desired. 360° rotation. Adjustable axis. Can be used without a perforated table for customer-specific parts or with a perforated table. Table height, top surface: 1.16 m. We have several of these rotators in stock. Additional cost for a new perforated table: €2,600 (2.0 x 1.0 x 0.2 m). Lodpfx Aeziyh Dofterp

Condition: used, functionality: fully functional, Alfa Laval TJ20G Rotary Jet Head 316L Stainless Steel 1½" Lrsdpfx Afezlqnyjtop Jet head's were removed from process in 2023 and kept as spares. In good condition. We have up to 8 of these available. Contact us for more information