Used Rotary Harrow for sale (4,127)

Condition: used, Incremental rotary encoder with solid shaft Cjdpob N E Hiefx Aiijri -Type: ZI 58 -Voltage: +11-27 VDC -Weight: 0.5 kg

Year of construction: 1988, condition: used, Eubama S5 Rotary Transfer Machine Serial Number 5531 Year 1988 Pristine Condition Not been used for 15 years Crjdpfx Aijdg Da Ieisi

Year of construction: 2012, condition: used, stainless rotary sandwich skillet sealer, twin tooling, adjustable heat seal temp controls, currently tooling 170mm x 43mm, mobile, single phase, Credec I Nz Ispfx Aiiei

Condition: good (used), Rotary feedthrough, rotary valve, rotary distributor -for hydraulics -Number: 2x large opening -Number: 8x control cable, smaller bore -Dimensions: 350 x 400 mm Cjdjb A Nbtepfx Aiijri -Weight: 45 kg

Condition: good (used), Absolute rotary encoder, incremental rotary encoder with solid shaft -Type: BVS58N-011AVR0NN-0013 Codpfx Aiob A Np Esisri -Factory no.: 113845 -No.: Quantity: 3 available -Price: per package -Weight: 0.5 kg

Year of construction: 1987, condition: used, machine/vehicle number: 6489; Lg-Nr. 13105, Technical data: - Maximum load capacity: 3000 kg - Turntable diameter: 1600 x 1600 mm - Turntable extension tubes - Turntable, motor-driven, swiveling: 0 - 90 / 135° - Steplessly adjustable rotary motion: 0.01 - 4 rpm - Controllable clockwise and counterclockwise rotation Cjdebp Ddzjpfx Aiisri - Welding current transfer: approx. 500 A - Power supply: 400 V - Table height in horizontal position without base: approx. 1200 mm - Table height in horizontal position with base: approx. 2200 mm - Space requirement: approx. W 1600 x H 1200 + 1000 x D 2400 mm - Weight: approx. 2700 kg

Year of construction: 1989, condition: good (used), For sale is a fully functional welding positioner from APS. Model 1000 E Year of manufacture: 1989 Machine number: H1-008 Speed range: 0.3-1 rpm 64mm hollow shaft Crodpfx Aijcl Ttvoiei Tilts left and right approximately 135° Space requirement: approximately 1700x1700mm Weight: 750kg

Year of construction: 2003, operating hours: 0 h, condition: good (used), machine/vehicle number: 00278, ROTARY COMPACTOR FOR CARDBOARD, PLASTIC AND BOXES OR CARDBOARDS Valpak Brand/Marca TECHVAL Type/Model// Tip/Model VALPAK Putere/Power 4 kW Year of manufacture/an fabricatie 2003 Acustic pressure/nivel de zgomot 59 db (A) Supply voltage/alimentare 380 V triple phase Protection/protectie 16A curve D Sizes/Dimensiuni in cm Coil Weight – Al fins 140x210x280 cm (LxWxH) 1200 kg Amount in stock/pe stoc 1 pc/buc 1 round bag of shredded waste = 36 containers of uncompressed cardboard 1 round cardboard bag will have 300/400 kg, of said boxes300 kg, plastic 200/300 kg Standard equipment has: Photoelectric cell, automatic cleaning system, 100% full sensor with machine stop, special roller cardboard / plastic / crate, system humidification, loading hopper on the front, management by PLC. Can work in cold condition until (-30 ° C), it has an antifreeze tank. Price/Pret Euro 2.850 + TVA Ex Works Loaded: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana Crsdpfx Ajfh Slpjiiji

Year of construction: 2010, condition: like new (used), The Sunds MDF rotary valve type LAF 200 is in good as NEW CONDITION and was manufactured in 2010. It is a robust high-performance rotary feeder, also known as a rotary conveyor, designed for the continuous discharge and volumetric feeding of large-volume bulk materials and fibrous materials. Name: Used Rotary Valve Manufacturer: Sunds MDF Type: LAF-200 Year built: 2010 Crsdpfjgw A Etex Aiisi - Near-new condition: This LAF 200 rotary valve was used solely for spare equipment storage for an overseas project and was therefore never put into operation - Drive power: Extremely powerful 11 kW electric motor - Speed & gear ratio: Geared motor designed to reduce the speed from 1475 to 22 rpm (high torque multiplication for difficult-to-handle fibrous materials) - Rotor design: Horizontally mounted rotary valve with 7 V-shaped cells (chambers). The V-shaped geometry prevents uneven blockage and ensures continuous material flowPrice: on request. - Material: mild steel - Dimensions (complete unit): Length: 3.400 x width: 2.200 x height: 2.370 mm - Inlet and outlet dimensions (square/rectangular): Inlet: 1.980 mm x 1.180 mm outlet: 2.180 mm x 1.000 mm - Empty weight: Approx. 4.500 kg (4.5 tonnes) - Operating hours: No operating hours and in near-new condition - SEW-EURODRIVE motor: KA107 DRE160mC4, 11 kW, 1475 rpm, 50 Hz, 38.50 / 22.00 A, IP 55 - Price: on request

Condition: not inspected (used), Year of construction: 1996, The technical specifications can be seen in the image. Codjhryp Ujpfx Aiieri

Condition: new, VORTEX Range Electrical power Maximum temperature 300 °C Electrical power 52 + 2.5 kW Heaters with front access Capacity: 18 trays Tray size: 60x80 cm Baking area: 8.6 m² Rotation diameter: 1020 mm External dimensions: 1700 x 1840 x 2700 mm Overall dimensions with door open: C 2350 mm Rotation by hook Suspended trolley Standard steam system with XL iron bars Front water outlet Rear outlet available upon request Manual steam release Stainless steel cladding Digital control panel with 99 programs Door opens to the right Double-glazed, full-view door Reinforced steam system with cast iron balls (optional) Programmable automatic steam release (optional) Drip-proof hood (optional) 600 kg rotating tray (optional) RC3 or MARCONI touchscreen (optional) Key advantages Electric rotating oven for trolley with 18 trays of 60 x 80 cm. Baking area of 8.6 m², suitable for regular professional batches. Electrical power of 52 + 2.5 kW. Maximum baking temperature of 300 °C. Rotation system by hook with suspended trolley. Digital control panel with 99 programs, multi-phase management, and programmable weekly start. Detailed technical specifications Reference: LFRNKE - 6080 Range: VORTEX Type of oven: Professional electric rotating oven Application: Baking bread, pastries, fresh or frozen dough Capacity: 18 trays Tray size: 60 x 80 cm Baking area: 8.6 m² Rotation diameter: 102 cm External dimensions: A 170 cm, B 154 + 30 cm, C 235 cm, H + H1 230 + 40 cm Maximum temperature: 300 °C Power: Electrical Heating system: Electric heaters with front access Electrical power: 52 + 2.5 kW Rotation system: By hook, suspended trolley Cladding: Entirely in stainless steel Baking chamber: Thick-gauge stainless steel with stainless steel base and trolley extraction slide Door: Opens to the right, double-glazed, full-view, classic LF handle Steaming system: Standard with XL iron bars Water outlet: Front, or rear upon request Steam release: Manual, programmable automatic option Cedszk Hb Tepfx Aiisri Control panel: Digital with 99 programs, multi-phase management, and weekly start programmer Optional controls: Electromechanical control panel or touchscreen End-of-baking safety: Flashing light and buzzer with digital or touchscreen control panel Delivery: Oven delivered unassembled or fully assembled (optional)

Condition: excellent (used), Year of construction: 2002, Miwe Roll-in rotary furnace Cjdozvw Riopfx Aiijri - used - year of manufacture 2002 - for sheet metal 60 x 80 - CS computer control system - new burner - 1 trolley - excellent technical condition - warranty - collection from the warehouse - price on request

Condition: good (used), Year of construction: 2000, clamping force: 4,000 kN, _TECHNICAL DATA – ENGEL ES 1800H/500W/400 HL-2F_ _INJECTION UNIT_ | AG1800H | AG500W Screw diameter: 70 mm | 40 mm Screw length: L/D 20 | 20 Metering stroke: 270 mm | 200 mm Screw speed: 226 rpm | 400 rpm Shot rate: 81 g/s | 32 g/s Injection rate: 386 cm³/s | 198 cm³/s Max. shot volume: 1039 cm³ | 251 cm³ Spec. injection pressure: 1441 bar | 1300 bar Spec. inj. pressure (increased): 1735 bar | 2020 bar Nozzle stroke: 750 mm | +5/-100 mm Nozzle contact force: 144 kN | 63 kN Heating capacity: 30.2 kW | 11.4 kW Heating zones (incl. nozzle): 5 | 7 _CLAMPING UNIT_ Clamping force: 4000 kN Opening stroke: 950 mm Ejector force: 82 kN Ejector stroke: 250 mm Max. platen distance: 1550 mm Min. mold height: 600 mm Platen BAP: 1400×1080 mm Platen FAP: 1400×1200 mm _DRIVE_ Pump power: 55 kW Oil (main tank): 540 l Oil (suction tank): 400 l _WEIGHT (without oil)_ Clamping unit: 27 850 kg Credpfozvf H Esx Aiiji Inj. unit AG1800H: 5 600 kg Inj. unit AG500W: 1 000 kg

Condition: excellent (used), Sullair ES-6 rotary screw compressor Crsdpfxszt Nw Aj Aiisi Technical details: 7,5 kW 10 bar capacity 0,97 m3/min weight 150 kgs runned hours: 7011 recently serviced

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1600058, total height: 300 mm, total width: 670 mm, total length: 890 mm, rotary table diameter: 600 mm, table diameter: 600 mm, compressed air connection: 8 bar, Haas HRT600 CNC rotary table / 4th axis / Ø 600 mm Haas HRT600 CNC rotary table (4th axis) for sale. This rotary table comes from a Haas VF-6B/40HE and was used as a 4th axis. The table is equipped with a servo drive and was tested on the machine again before removal. The axis could be moved and rotated flawlessly via the control. The rotary table has a diameter of approximately 600 mm. Serial number of the rotary table: 1600058. Condition Rotary table rotates and moves via the Haas control. Functionality tested before removal. No detailed geometric measurement performed. Csdpfx Ajzzbiteiisri Angular accuracy, runout, and repeatability were not checked with a dial indicator. Sale due to non-use. Technical data Manufacturer: Haas Automation Model: HRT600 Type: CNC rotary table / 4th axis Table diameter: 600 mm Serial number: 1600058 Year of manufacture probably 2004/2005 (matching the original machine)

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 32/5, Rotary screen S = 1.5 P = 0.55 kW N = 9 rpm Weight: 450 kg Codsztxw Sjpfx Aiiori Dimensions: 630 x 1500

Year of construction: 2017, condition: used, Professional rotary oven for bakery use, designed for the production of pastries and baked goods. The rotor is an oven with a rear burner and heat exchanger, which allows for a reduction in the overall dimensions of the unit. Balanced hot air, combined with the rotation of the rack and controlled steam injection, ensures consistent and even baking, promoting rise and imparting a full aroma to the product. Perfectly stable baking allows for the production of voluminous and soft bread of any shape and type. Manufacturer: MECH - MASZ Model: ROTOR 68 Tray size: 60 x 80 cm Baking area: 8.6 m2 Crsdpezt Ab Iefx Aiiei Weight: 1450 kg Power supply: oil burner Year of manufacture: 2017

Condition: reconditioned (used), Year of construction: 2008, Miwe Roll-in rotary oven - used Cjdpfx Aiezxdg Aoiori - year of manufacture 2008 - for sheet metal 60 x 80 - DS electronic control system - after overhaul - new burner - hood with fan - warranty - collection from warehouse / shipping option available - price on request

Year of construction: 2021, condition: used, empty load weight: 5 kg, Year of manufacture: 2021. Weight: 4.7 kg. Condition: good. 230 volts including case, drilling and chiseling. Multiple units in stock. Price: € 200,- excl. VAT Cjdpfx Aezxvh Esiijri

Condition: ready for operation (used), Manufacturer: H&G Model: HG/SV 11 Credszp Ilqopfx Aiioi Weight: 1800 kg Engine power: 11 kW

Condition: good (used), Year of construction: 2013, 454 USED Wachtel Compact STIR Oven. TECHNICAL DATA: Csdozlh E Ajpfx Aiieri - Year of manufacture: 2013. EQUIPMENT: - Gas burner (can be oil-fired), - 2 baking trolleys. Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, rack oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, overall weight: 250 kg, warranty duration: 12 months, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, The SITEC ITVP500 is a tilting lathe with 1 axis, controlled by a Numerical Control system, designed for circumferential TIG and MIG welding of cylindrical stainless steel components. The machine guarantees high precision, repeatability, and ease of use, making it ideal for industrial production and high-quality machining. Key features: Maximum workpiece diameter: Ø 500 mm Maximum workpiece length: 500 mm Maximum load capacity: 100 kg Tailstock travel: 150 mm Workable material: Stainless steel Welding processes: TIG / MIG Variable speed spindle rotation: 0.1 – 12 rpm CNC Numerical Control with integrated PLC Programming and storage of welding cycles Pneumatic tailstock with two-hand closing system Torch adjustment slides for precise positioning on the joint High-rigidity, electrically welded steel structure Prepared for remote assistance and network connection Advantages: High welding precision Reduced setup times Simple and intuitive programming High repeatability of production cycles Ideal for series production and contract manufacturing Crodpfx Aiszlig Ueioi Applications: The machine is suitable for circumferential welding of pipes, fittings, flanges, bottoms, manifolds, tanks, stainless steel components, and cylindrical parts for the food, pharmaceutical, plant engineering, chemical, and energy sectors. Customization: The machine can be configured with numerous optional features and accessories (motorized slides, AVC sensors, cold wire feed, brushless motors, rotary joints, cooling systems, and other dedicated solutions) to adapt to the specific production requirements of the customer. For further information, photographs, demonstration videos, and available configurations, please do not hesitate to contact us.

Condition: used, 3 used round tables Diameter: 250 mm, 300 mm, 400 mm. Cjdpfxezt Iyve Aiieri

Condition: used, Year of construction: 1980, workpiece diameter 600 mm workpiece weight 400 kg Credpfx Aist Abrwjiji workpiece height 300 mm total power requirement 35 kW weight of the machine ca. 4500 kg

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Crodpfx Aou Tln Njiisi Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition