Used Rotary Engine for sale (20,762)

Condition: used, Swivel stacking containers can be inserted into each other when empty. This can save up to 70% space. Duodpfxsqqhvlo Afnel These containers can be stacked on top of each other - even without a lid - by turning them. When they are turned 180 degrees again, they can be nested. Manufacturer: unknown, could be Schoeller Allibert Type: unknown Year of manufacture: unknown, probably 2005 Dimensions: 59.5 cm L x 40 cm W x 32 cm H The following information is subject to change: Outside 600 x 400 x 300 Inside. 460 x 340 x 270 Stack height 285 Nesting ratio 72% With company imprint Mostly with document pocket approx. 60 pieces per pallet Weight: approx. 2kg / box Volume: approx. 50L Boxes gray: with ribbed bottom Boxes blue: with smooth bottom The blue crates often have an inlaid plywood bottom (the customer inserted this because the crates fell down during empty runs in the AKL because they were too light). However, we cannot sort the crates according to these crates. Available: immediately Condition: good, used, most of the crates are in a much better condition than in the photos! Location: D- NRW

Condition: excellent (used), Year of construction: 2010, Excellent condition can be demonstrated if required we also have a video of it running Duodpfjq Rciljx Afnjl we have also got a tailstock if required

Year of construction: 2009, condition: used, Manufacturer: TERRA SELECT Model: T4 Engine: PERKINS 60 kW (80 hp) Transport Measurement: L. 9,500 mm x W. 2,550 mm x H. 3,950 mm Operational Meas: L. 11,800 mm x W. 6,800 mm x H. 3,300 mm Year: 2009 Hourly Production: 70 m³/h Screening: DRUM L. 4,200 mm x D. 1,600 mm Hopper Capacity: 3.40 m³ Duodpfxeunx R Io Afnsl Discharge belts: L. 3,400 mm x L. 800 mm Tank: 160 L Weight: 10,200 kg

Condition: good (used), Year of construction: 2012, For sale are 2 identical injection molding machines of the company Netstal and the type SynErgy 2000-230/110 The machines were in production until the last day The company from which these machines originate attaches great importance to maintenance and servicing, which is why the machines are in very good condition 2 K function Turntable Designation Netsal SynErgy 2000 Year of construction 2012 Operating hours 28828 Weight 13300kg Clamping force in kN 2000 Injection unit 230 Machine drive 45 kW drive power Length 6901mm Width 2075mm Height 2240mm Cylinder size AG1 20mm / 32mm Available Cylinder sizeAG2 25mm / 32mm Available ____ Handling Wittmann, can be purchased additionally Serial number W833PRO - 0284 Operating hours approx. 13000h Year of construction 2016 Outfeed conveyor at the bottom Width 400mm Length 2300mm The systems can be purchased complete or in individual parts Machines already dismantled Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Duodpfx Afskv Uq Ijnel Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: like new (used), Year of construction: 2020, operating hours: 2,900 h, functionality: fully functional, cloos robot Qirox 350 incl. control QC 2 touch sensor, seam tracking, point editor rotary gallow welding machine cloos qineo puls 451, wirde drive, torch, torch hose package Dsdpfx Afsx Iu R Honsul 2 light beams, 2 start pre selections manipulators on request

Condition: good (used), Rotary unit, rotary device, turning table, turning unit -Roller conveyor length: 850 mm -Rollers: Ø 80-120 mm -Roller spacing: 190 mm -Roller width: 220 mm Dedpfxob A Ib Ee Afnjul

Condition: new, mileage: 1 km, power: 331 kW (450.03 HP), fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 4,900 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, Year of construction: 2025, Technical Information Number of cylinders: 6 Engine displacement: 10,800 cc Transmission Transmission: ZF TraXon, 12-speed, automatic Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Max. axle load: 10,000 kg; Tread depth left: 100%; Tread depth right: 100%; Suspension: Parabolic suspension Rear axle 1: Tire size: 315/80R22.5; Max. axle load: 17,000 kg; Tread depth left: 100%; Tread depth right: 100%; Suspension: Air suspension Rear axle 2: Tire size: 315/80R22.5; Max. axle load: 17,000 kg; Tread depth left: 100%; Tread depth right: 100%; Suspension: Air suspension Rear axle 3: Tire size: 385/65R22.5; Lift axle; Max. axle load: 8,000 kg; Tread depth left: 100%; Tread depth right: 100%; Suspension: Air suspension Condition General condition: very good Technical condition: very good Visual condition: very good Damages: none Djdsxrc Swopfx Afneul Warranty Warranty: None

Condition: used, machine/vehicle number: YS2R6X2000200xxxx, mileage: 700,000 km, Year of construction: 2005, Please contact ATS Norway for more information Please provide reference number upon request: 21047 Specifications : - 2005 model - Km: approx. 700,000, new engine approx. 220,000 - Not EU approved since 2016 !! - Wheelbase: 470/136 cm - Tires (see pictures) - Spring: air - Retarder - Battery back - Tool cabinet - Automatic - Bed - AC/climate - Radio - Delivery by appointment Djdpfx Afow Ia Ensnoul   Description : 2005 Scania R500 container truck with lift and replaced engine. ECT. According to the owner, the car has done 700,000 km, it is very old so this should be double checked. The car has had the engine replaced which Owner says it has done around 220,000 km. The reason for the repair object is that the car has been standing for 10 years, which must be taken into account in the cost of the car to get it EU-approved. Delivery by arrangement. Km: 700000 Technical approved: no Own weight: 1 Model: R500

Condition: new, Screw compressor AGRE Model Sonetteo 7,5+ 10 Screw compressor compact unit incl. refrigerant dryer and DL tank 270 lt. Belt driven. Space saving. Inexpensive. Easy operation thanks to Infologic² Basic control. Efficient compressor stage. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Mounted refrigeration dryer. Equipment in detail: Duodpfjhun Tzex Afnol Compression concept: oil-lubricated screw compressor Cooling: air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: fixed speed Control: Infologic² Basic control unit Refrigerant dryer: Mounted, refrigerant R513A Tank: 270 lt. horizontal painted 11 bar Motor power: 5,5 kW Pressure: 10 bar Delivery rate: 780 lt./min incl. time controlled condensate drain Dimensions L x W x H = 1500 x 1350 x 600 mm

Condition: good (used), Year of construction: 2014, For sale are 2 identical injection molding machines of the company Netstal and the type SynErgy 2000-230/110 The machines were in production until the last day The company from which these machines originate attaches great importance to maintenance and servicing, which is why the machines are in very good condition 2 K function Turntable Designation Netsal SynErgy 2000 Clamping force in kN 2000 Machine drive power in kw 45 Year of construction 2014 Operating hours 20209 Weight 13300kg Length 6901mm Width 2075mm Height 2240mm plus 800mm flow box Cylinder size AG1 20mm Cylinder sizeAG2 16mm _____ Designation Flow Box Type LMP 105 Manufacturer Max Petek Serial number S 140743 Year of manufacture 2014 Dsdpfx Aokwb Diefnjul _____ Can be purchased additionally: Krauss - Maffei MH 50 robot Designation 6 -axis: Yaskawa Type: DX 100 Operating hours approx. 8900 Year of construction 2014 The systems can be purchased complete or in individual parts Prices plus value added tax Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: new, Year of construction: 2025, Rotary Blades Model: WEIMA, GROSS, VECOPLAN Type: WL, WLK, GAZ, VAZ Year of Manufacture: 2025 New / Ready for immediate use 1. Blade 40x40x25 M12 (PC) 2. Blade 40x40x25 M12 (KR) 3. Blade 40x40x25 M14 (KR) 4. Blade 40x40x20 M12 (KR) Dusdpfx Afexw Nrbonjl 5. Blade 40x40x16 M10 (KR) We manufacture replacement blades and spare parts for crushers and shredders. Please specify the blade type when ordering.

Condition: good (used), Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 305 mm -Height: 120 mm -Dimensions: 420/370/H120 mm -Weight: 50 kg Duodpfeb A Itpjx Afnel

Condition: reconditioned (used), Year of construction: 1989, functionality: fully functional, volume flow: 12.6 m³/h, overall weight: 200 kg, total length: 1,250 mm, total width: 415 mm, total height: 450 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 25 rpm, rotational speed (min.): 20 rpm, torque: 390 Nm, 2 pieces of unused rotary valve dosing sluices. Both sluices have been completely overhauled. New bearings and seals have been installed. ! Price per item ! Manufacturer: Kreisel Industries GmbH Type: ZS315-1 Size inlet / outlet: 300 x 300 mm Housing material: cast iron / Rotor: welded steel sheet Overall height: 450 mm Number of cells: 7 Cell dimensions: length 300 mm / width 100 mm / height 40 mm Weight: 200 kg per piece The geared motors are also unused old stock. Manufacturer: Thurm DDR Year of manufacture: 1990 Function tested! Bearings can be relubricated from both sides externally. Sluice 1 Drive power: 0.75 kW Speed: 20 rpm Dujdpfjx N A N Tsx Afnsl Theoretical delivery rate: 10 m³/hour Sluice 2 Drive power: 1.1 kW Speed: 25 rpm Theoretical delivery rate: 12.6 m³/hour

Condition: like new (used), – Centre distance 1000 mm – Swing over bed 360 mm Dujdpfx Aox N A D Dsfnel – Swing over gap 490 mm – Swing over cross slide 180 mm – Spindle bore 52 mm – 70–2000 rpm – Infinitely variable speed – Digital speed display – Longitudinal and cross feed – Digital readout on two axes – Brake – Coolant system – Lighting – Safety cover – Fixed steady rest – Travelling steady rest – Three-jaw chuck – Four-jaw chuck – Emergency stop – Documentation – 400V

Condition: new, AGRE ALUP ALLEGRO 14+ 13 270 Speed controlled. Space-saving. Inexpensive. Efficient 1:1 direct drive. Easy operation. Low energy consumption. High performance. Suitable for a wide range of applications. Convincing compressed air quality. Cyclone separator and refrigeration dryer built in. Equipment in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled design Drive: High frequency motor, with 1:1 direct drive Control: Speed controlled with frequency converter Control: Graphic control C55DD Refrigerant dryer: Integrated, refrigerant R513A Filtration: incl. cyclone separator Duedpjixt I Hsfx Afnjl Container: horizontal, painted Performance data: Volume flow at operating pressure 7.0 bar = 0.26-2.26 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 16.2 kW Rated power motor 15 kW Oil quantity 5.2 lt Dimensions and weight: L x W x H = 1655 x 655 x 1550 mm weight 400 kg Compressed air outlet G 3/4'' Capacity compressed air tank 270 lt

Condition: used, maximum load weight: 33,481 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2010, next inspection (TÜV): 03/2026, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, total width: 2,600 mm, Year of construction: 2010, Cool unit brand: Thermo King Additional information: * Curb weight: 8,519 kg * Type | First axle: Goodyear R * Tyre size | First axle: 385/65 R22.5 * Tyre tread depth inner left | First axle: 40% * Tyre tread depth inner right | First axle: 40% * Maximum axle load | First axle: 9,000 kg * Type | Second axle: Goodyear R Duedpox N Aitsfx Afnjl * Type | Third axle: Goodyear R * Tyre size | Second axle: 385/65 R22.5 * Tyre size | Third axle: 385/65 R22.5 * Tyre tread depth inner left | Second axle: 40% * Tyre tread depth inner left | Third axle: 40% * Tyre tread depth inner right | Second axle: 40% * Tyre tread depth inner right | Third axle: 40% * Maximum axle load | Second axle: 9,000 kg * Maximum axle load | Third axle: 9,000 kg * Position | First axle: Rear * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Lift axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brand | Second axle: Other * Brand | Third axle: Other * Brake type | Second axle: Disc brakes * Brake type | Third axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension * Lift axle | Third axle: Yes Additional equipment: * Rear doors * Homepage * Tail lift * Lift axle * SemCollection * SemStars Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | We kindly ask you to inquire in advance about the costs and procedures applicable in your country Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors.

Condition: new, Year of construction: 2025, Rotary Blades Model: LINDNER Type: MICROMAT Year of Manufacture: 2025 Dsdpjxn Nyaofx Afnoul New / Ready for Use 1. Blade 43x43x20 2pcs (KR) 2. Blade 43x43x20 2pcs (K8) 3. Blade 43x43x23 1pc (KR) 4. Blade 43x43x23 2pcs (K8) We manufacture replacement blades and spare parts for crushers and shredders. Please specify the blade type when ordering.

Condition: good (used), Rotary feedthrough, rotary valve, rotary distributor -for hydraulics -Number: 2x large opening -Number: 8x control cable, smaller bore -Dimensions: 350 x 400 mm -Weight: 45 kg Dedpfjb A Nbtox Afneul

Condition: excellent (used), mileage: 91,000 km, power: 188 kW (255.61 HP), first registration: 03/2009, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,610 mm, fuel: diesel, color: red, gearing type: automatic, emission class: euro4, suspension: steel, total length: 7,050 mm, total width: 2,500 mm, Year of construction: 2009, Equipment: ABS, differential lock, trailer coupling, = Additional Options and Accessories = - Leaf suspension - Air horn - Side door - Sun visor flap - Toolbox - Power take-off (PTO) - Power take-off (PTO) - Central lubrication - Towing hitch Djdpfx Afow Iqmcenoul = Notes = Ziegler pump, 638 operating hours 2000 litre water tank Hoses = Further Information = General Information Cab: double Technical Information Number of cylinders: 6 Engine displacement: 6,374 cc Axle Configuration Suspension: leaf suspension Front axle: Max. axle load: 4,700 kg; Tyre tread left: 80%; Tyre tread right: 80% Rear axle: Twin tyres; Differential lock; Max. axle load: 9,300 kg; Tyre tread inside left: 80%; Tyre tread outside left: 80%; Tyre tread inside right: 80%; Tyre tread outside right: 80% Weights Unladen weight: 8,770 kg Payload: 5,230 kg Gross vehicle weight (GVW): 14,000 kg Maintenance, History, and Condition APK (roadworthiness inspection): valid until 03/2026 Technical condition: very good Optical condition: very good Further Information Please contact Andre, Henri, or Andre for more information.

Condition: new, AGRE ALUP SCK 10-10 270+ Belt driven. Space saving. Inexpensive. Easy operation. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Built-in refrigerant dryer. Sound-insulated screw compressor with V-belt drive on compressed air receiver 270 l with built-in refrigeration dryer, integrated cyclone separator, with electronic condensate drain and C55 graphic control. Dsdpfxoixt H Ne Afneul Equipment in detail: Compression concept: oil-lubricated screw compressor Cooling: air cooled Drive: Efficient IE3 motor, belt drive Control: fixed speed Control: Aircontrol 5.0 Refrigerant dryer: attached, refrigerant R513A Filtration: incl. cyclone separator Tank: horizontal, painted, manufactured according to AD2000 Performance data: Volume flow at operating pressure 9.5 bar = 1.06 m³/min operating pressure min. / max. 5,5 / 10,0 bar Total power consumption at 9.5 bar / full load 10.2 kW Rated power motor; IP55 7.5 kW Oil quantity 4 lt Dimensions and weight: L x W x H = 1530 x 662 x 1531mm weight: 310 kg Compressed air outlet: G 1/2'' Compressed air tank capacity: 270 lt

Condition: used, maximum load weight: 33,609 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 02/2013, next inspection (TÜV): 02/2026, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, total width: 2,600 mm, Year of construction: 2013, Cooling unit brand: Carrier Additional information: * Curb weight: 8,391 kg * Type | First axle: Goodyear R * Tyre size | First axle: 385/65 R22.5 * Tread depth inner left | First axle: 80% * Tread depth inner right | First axle: 80% * Max. axle load | First axle: 9,000 kg * Type | Second axle: Goodyear R * Type | Third axle: Goodyear R * Tyre size | Second axle: 385/65 R22.5 * Tyre size | Third axle: 385/65 R22.5 * Tread depth inner left | Second axle: 30% * Tread depth inner left | Third axle: 60% * Tread depth inner right | Second axle: 30% * Tread depth inner right | Third axle: 60% * Max. axle load | Second axle: 9,000 kg * Max. axle load | Third axle: 9,000 kg * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Brand | Third axle: Other * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension * Position | First axle: Rear * Brand | First axle: Other * Lift axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brand | Second axle: Other * Brake type | Third axle: Disc brakes Duodsxav Etspfx Afnjl Additional equipment: * Rear doors * Homepage * Tail lift * Lift axle * SemCollection * SemStars Semtrade B.V. Contact | Martin Klaaijsen | Tel: | WhatsApp: | Email: Export costs | Please inquire in advance about the costs and procedures for your country Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to change, prior sale and errors excepted.

Condition: new, Year of construction: 2025, Rotary Blade Model: LINDNER Type: ANTARES Year of Manufacture: 2025 New / Ready for Use We manufacture replacement blades and spare parts for crushers and shredders. Please specify the blade type when ordering. Dujdpfx Afjxn Nvhsnjl

Condition: good (used), Reversible clamping device, 4th axis, rotary table, rotary indexing table, controlled rotary table, dividing head, dividing head, rotary indexing table, rotary coupling -Manufacturer: Fibro, Fibroplan rotary table with drive Dsdpfehvtcbjx Afnsul -Type: NC1.03.0340.1.1.04.04 -Table diameter: 340 mm -Clamping: hydraulic -Drive: Indramat servomotor type 112B-0-LD-4-C/180-A-0/Wi533LX/S011 -Number: 2x round table available (one of which has a base plate) -Price: per piece -Dimensions: 660/640/H550 mm (with base plate) -Weight: 420 kg (with base plate) /pc.

Condition: good (used), Container rotating device, welding rotating device, welding rotating device, welding device, welding turntable -Max. diameter: 430 mm -Drive: 0.18 kW -Speed: min. 0 mm/min -Speed: max. 1190 mm/min -Adjustable: electronic -Foot switch -Dimensions: 1100/600/H1600 mm -Weight: 166 kg Djdsb A Nptepfx Afnsul

Condition: good (used), Incremental rotary encoder with solid shaft -Type: 42 6 Dujdpfx Afeb A R Easnsl Factory no.: 0584 -Impulses: 113 U -Dimensions: 115 Ø 95 mm -Weight: 2 kg