Used Rod Milling Machine for sale (66,699)

Condition: used, Year of construction: 2018, Milling machines Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center table size X: 1270 mm table size Y: 610 mm input Power : 12 kW Hjdpfjzguh Hjx Aahsp Torque: 237 Nm High-performance 3-axis machining center Number of tools in the magazine: 30 SK40 tool holder Internal coolant supply Spindle cooler Hurco MAX 5 control with WinMax software

Condition: used, Year of construction: 2014, Milling machines Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center spindle revolutions: 12000 rpm table size X: 1270 mm table size Y: 610 mm input Power : 12 kW Torque: 237 Nm High-performance 3-axis machining center Number of tools in the magazine: 30 SK40 tool holder Hjdpfx Aaozguhyohjp Internal coolant supply Spindle cooler

Condition: repair required (used), functionality: not functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 420 mm, The control unit is defective, but otherwise it functioned perfectly. Hjdpfx Aaszhulhehep

Condition: good (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 3006110, travel distance X-axis: 600 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 380 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 45 rpm, overall weight: 1,300 kg, Universal milling machine OPTImill with control panel and digital position display for horizontal and vertical milling. Table feed Table feed X and Y axis Z-axis with electric table height adjustment Cross slide Tool holder size: max. Ø 85 mm Shank milling cutter size: max. Ø 20 mm Vertical spindle - mounting: ISO 40 - DIN 2080 Vertical spindle - distance spindle-table: 90 - 520 mm Vertical spindle - swivel range: 360 degrees Vertical spindle - rotation range: 360 degrees Vertical spindle - speed: 45 - 1600 min-1 Vertical spindle - gear stages: 11 Vertical spindle - motor power: 2.2 kW Cross slide - size (L x W): 1120 x 260 mm Cross slide - load capacity: 350 kg Hsdpfxozhuhps Aahjp Cross slide - slots / spacing / number: 14 mm / 63 mm / 3 X-axis - travel (manual): 600 mm X-axis - travel (motorized): 480 mm X-axis - feed rate: 24 - 402 mm/min X-axis - motor power (S1): 0.37 kW Y-axis - travel (manual): 270 mm Y-axis - travel (motorized): - Y-axis - feed rate: 24 - 402 mm/min Y-axis - motor power (S1): 0.37 kW Z-axis - travel (manual): 380 mm Z-axis - travel (motorized): 340 mm Z-axis - feed rate: 24 - 402 mm/min Z-axis - motor power (S1): 0.75 kW Connection power: 3.36 kW | 400 V - 50 Hz Coolant pump: 40 Watts Dimensions (L x W x H): 1540 x 1355 x 1650 mm Weight (net): approx. 1300 kg Including coolant system, machine light, milling spindle, milling arbor, and operating tools Item location: 09120 Chemnitz

Condition: used, Technical specifications: Max. distance from the table to the spindle: 180 mm Vertical spindle travel: 100 mm Hedpfezhub Nox Aahop Spindle adjustable pneumatically and hydraulically Interchangeable spindle Adjustable table (up and down) Spindle speed: 1000/2000 rpm Motor power: 4 kW Power supply: 380 V

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush - Bulb for signal lamp Hjdpfx Ajxwvrujahsp - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate - External exhaust hose ULT - Table lift cylinder (?) According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Hedpfx Aajw E Tzrshsp Condition: as new, machine is unused Equipment and technical specifications: - Spindle speeds: 3,500 / 6,000 / 8,000 / 10,000 rpm - Milling spindle tilt: 0 to -45° - Usable spindle length: 125 mm - Spindle arbor diameter: 30 mm - Speed display: LED indicator on the machine front - Max. tool diameter (standard): 240 mm - Max. lowerable tool diameter: 230 mm - Max. tool diameter for profile milling: 240 mm - Max. tool diameter for tenoning: 320 mm - Working table length: 1,200 mm - Working table width: 530 mm - Table height: 900 mm - Sliding table length: 1,200 mm - Sliding table width: 360 mm - Sliding table height: 142 mm - Extraction port diameter: 2 × 120 mm - Main drive motor power: 5.0 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Dimensions: 1,200 × 2,000 mm Weight: 510 kg Availability: short-term Location: Saxony-Anhalt

Year of construction: 2005, condition: used, Used machine Year of manufacture: 2005 Equipment and technical data: - Log house milling machine BL100A - four-head unit - For producing chalet corner joints by milling on four sides of the log plank in a single clamping, using 2 × vertical and 2 × horizontal milling spindles - Processing dimensions: 140 × 200 mm - Milling spindles: Ø 30 mm - Cutter: max. 4 × 220 × 100 mm - Motor power: 4 × 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, steplessly adjustable, with rapid traverse - Operation: two-hand activation / via PLC control - Milling depth adjustment: spindle, digital counter - Workpiece clamping device: 2 × vertical, pneumatic - Extraction: underfloor funnel, Ø 160 mm - Equipment: complete with electrical system, PLC control, and pneumatics - Machine base: prepared for end groove unit, drilling device, and cross-cut saw - Machine enclosure: closed design, hinged safety cover (gas spring) with viewing window - Control cabinet: on pedestal with 3.0 m cable sleeve - Delivery condition: ready for operation, without tools - Horizontal clamps in machine table: 2 units - Activation: pneumatic, front-mounted - Clamping cycle: automatic via PLC control - End groove unit integrated - Milling spindle: Ø 30 mm - Cutter: max. 180 × 40 mm - Motor power: 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, steplessly adjustable, with rapid traverse - Height adjustment: spindle, digital counter - Workpiece clamping device: 1 × additional vertical, pneumatic - Equipment: integrated, with electrical system and pneumatics, without cutters - Horizontal drilling device integrated, with drill guide and chip guard - Drill diameter: max. 30 mm - Motor power: 1.1 kW - Speed: 1,500 rpm - Feed: pneumatically, steplessly adjustable, with rapid traverse for idle stroke - Height adjustment: spindle, digital counter - Workpiece clamping device: 1 × additional vertical, pneumatic - Equipment: integrated, with electrical system and pneumatics, incl. Ø 20 mm drill bit Hodpfx Aeyxyaneahjp - Under-table cross-cut circular saw integrated (automatic mode only) - Maximum cutting dimensions: 200 × 140 mm (W × H) - Saw blade diameter: 500 mm - Motor power: 4.0 kW - Cutting speed: 86 m/s - Feed: pneumatic - Workpiece clamping device: pneumatic - Extraction: suction funnel Ø 120 mm - Equipment: integrated, with electrical system and pneumatics, incl. saw blade - Prepared for automatic operation - Sliding table: mechanics, pneumatics, and electrics for end groove mill - Interface: electric, for actuation via external Tigerstop control - Infeed table length: 9,000 mm - Outfeed table length: 4,000 mm Availability: short notice Location: Röllbach

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Automatic spindle height and tilt adjustment with decimal increments - Mechanical display for spindle height and electronic display for spindle tilt - Tilting hood with aluminum guides - Adjustable table opening via table slides - System for quick tool change - With long tables featuring extendable workpiece support - Table size: 2500 x 780 mm - Spindle adjustment: -45° to +45° - Spindle diameter: 30 mm - Spindle stroke: 230 mm - Maximum table opening: 300 mm - Motor: 5.5 kW with automatic star-delta start - With forward/reverse rotation - Speeds: 3000/4500/6000/8000/10000 rpm - Electronic programming of spindle height, spindle tilt, and fence position (milling fence) - Extraction ports above and below 120 mm Dimensions: 2570 x 1450 mm Hedpjw I H Rqsfx Aahsp Weight: approx. 670 kg Availability: short notice Location: Röllbach

Condition: used, Year of construction: 1981, Used machine Year of manufacture: 1981 Equipment and technical data: - with dual-lift spindle, pneumatic Hjdpfswka E Uex Aahop - mandrel diameter: 40 mm - with large table length: 2500 mm - with extendable frame support - with milling fence featuring Panhans metal jaws and fine adjustment Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1996, Used machine Year of manufacture: 1996 Equipment and technical specifications: - The basic principle of Hofmann machines is the proven cast iron construction - Gray cast iron is by far the leader in vibration damping, compressive strength, and load capacity - Milling arbor 30 mm with right and left rotation - Milling fence with stop jaws, central adjustment, and fine adjustment of one jaw - Manual height adjustment with digital display and zero-reset button - Table size: 1200 x 820 mm Hsdpfx Aowwxzheahop - Table height: 890 mm - Motor power: 5.0 / 6.2 kW - Spindle speeds: 3000/4000/5000/6000/8000/10000 rpm - Height adjustment: 125 mm - Chip extraction ports: 110/120 mm - With Holz Her 2-roller feed unit Weight: 850 kg Availability: by arrangement Location: 63934 Röllbach

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Equipment and technical data: - Fixed milling spindle; newly fitted bearings - with table extension and extendable frame support 2500 mm - Motor 5.5 kW - Speeds 3000/4500/6000/8000/10000 rpm - Milling fence with 2 adjustment options: - complete fence - rear take-off jaws - Extraction hoods: 2 x 120 mm - Automatic motor brake - Right/left rotation - with Haffner power feed with 4 rollers Weight approx. 700 kg Availability: by arrangement Location: Flörsheim Hjdpfsw I Uinex Aahep

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Hjdpfx Aaexllw Ashjp Features and technical data: - Cast iron table, surface ground and hardened - Spindle adjustment via handwheel and scale on the front side - 4 speeds with electronic speed display - External spindle lock - Milling fence with fine adjustment on both sides + central adjustment - Motor brake - Extraction ports top and bottom - Spindle: 30 mm - Motor: 4 kW - Table dimensions: 1100 x 700 mm - Spindle speeds: 2900/4400/6000/8000 rpm - Vertical spindle adjustment: 220 mm - Table opening: 300 mm - Usable spindle length: 1890 mm - Extraction ports: 150/120 mm - With 4-roller power feed unit Weight: 600 kg Availability: short-term Location: Röllbach

Condition: used, Used machine Equipment and technical data: - Heavy cast iron construction - Motor: 5.5 kW - Spindle diameter: 30 mm - 2900-4400-6000-7800-10000 rpm - Height and tilt adjustment: electric motor drive - Fine adjustment: via handwheel - Equipped with Panhans metal fence jaws - With Holz-Her 3-roller power feed unit Hsdoy R Hafspfx Aahjp Availability: short-term Storage location: 63934 Röllbach

Condition: used, Year of construction: 1963, Stationary milling machine Year of manufacture: 1963 Spindle diameter: 30 mm Availability: short notice Hsdpfx Aewka R Rjahsp Storage location: Röllbach

Condition: used, Used machine Equipment and technical data: - Table size: 800 x 1000 mm - Diameter of table opening: 480/380/170/125 mm - Taper of milling spindle: MK 5 - Spindle speed: 3000 + 4500 + 6000 + 9000 rpm - Height adjustment range of spindle: 150 mm - Distance from spindle center to front edge of table: 400 mm - Maximum permitted tool diameter: 250 mm - with wooden fence jaws (can be exchanged for metal fence jaws upon request) - with Holz Her 3-roller feed unit - with heavy-duty sliding table; runs on ball bearings on precisely milled, parallel guideways Weight: approx. 800 kg Availability: short-term Hedpjyq T Ihefx Aahop Location: 63934 Röllbach

Condition: used, Year of construction: 1986, Used machine Year of manufacture: 1986 Features and technical data: Motor: 4 kW Speeds: 3000 / 4500 / 6000 / 8000 / 10000 rpm Spindle height adjustment via handwheel Installation dimensions: 1200x80x1350 mm Fence jaws made of wood Incl. Holz Her 3-roller feed unit incl. stand With chassis Availability: short-term Location: Röllbach Hjdpfsxllxaox Aahjp

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 2007 Equipment and technical data: - Motor 4.7/5.7 kW, with pole-changing capability - With right/left rotation - Milling arbor MK 5 / 30 mm - Height adjustment via handwheel - Speeds 3000/4500/6000/9000 rpm - Milling stop with metal jaws, mounted on a round indexing plate and thus rotatable by 360° Hsdpfsy R Halsx Aahop - With table extension on both sides with extendable frame support - With mounted roller table on the left side Attention! The table extension was mounted later! To use the roller table, it must be removed! - With 4-roller feed unit, year of manufacture 2007 - Dimensions: 240x65x120 - Weight approx. 900 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 1999, Used machine Hjdpfx Ajy Si Areahjp Year of manufacture: 1999 Features and technical data: - with tilting spindle: 0° - 45° - with aluminium sliding table - Table size: 1100 x 620 mm - Working height: 880 mm - Sliding table dimensions: 900 x 200 mm - Sliding table travel: 900 mm - Spindle diameter: 30 mm - Spindle stroke: 150 mm - Speeds: 3100/4600/6200/8000 rpm - Motor: 4 kW - with 4-roller power feeder - Dimensions: 1200 x 1000 x 1400 mm - Weight: approx. 490 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Used machine Equipment and technical data: - Vertical spindle travel: 150 mm - Spindle diameter: 30 mm - Spindle speeds: 3,500 - 7,000 rpm - With fixed spindle - Motor: 2.5–3.1 HP - Table: 830 x 700 mm - Slotting cutters up to 340 mm - With metal-jaw milling fence (Note: The Aigner parallel fence shown in the photos is not included in the scope of delivery!) - With 3-roller feed Weight: 240 kg Hodpfey Dkgpex Aahjp Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Machine will be completely overhauled Equipment and technical data: Table size: 1100 x 880 mm Pole-changeable drive motor: 5/6 kW Spindle speeds: 3000/4500/6000/9000 rpm Manual height adjustment: via handwheel Hedpewka Sbsfx Aahop Manual tilt adjustment: via handwheel Height adjustment of milling spindle: 110 mm Tilt adjustment of milling spindle: -5° to 45°; double-sided bearing Reversing switch for clockwise and counterclockwise rotation With 3-roller power feed unit Images show the machine in non-overhauled condition. Sale does not include Aigner table extensions visible in the images. Availability: by arrangement Location: Flörsheim

Condition: used, Used machine Equipment and technical data: Mortise milling unit Boring tool for hinge holes Rabbet cutter Including accessories Motor: 1.7 kW Hsdpfx Aowhuk Teahjp 2800 rpm Location: Flörsheim Availability: short notice

Condition: new, Year of construction: 2022, New machine Year of manufacture 2022 Save working time with recallable tools; once set up, the drive unit can be brought back to the preset position with a single movement Mobile and flexible in use; beveling, grooving, flush milling Addition to table and CNC milling machines Hodpjw I Upzsfx Aahep Table size 520 x 430 mm with fine adjustment #10450 Availability: short-term Storage location: Flörsheim

Condition: used, Year of construction: 1974, Used machine Hodpfxew I Urij Aahop Year of manufacture: 1974 Equipment and technical data: Spindle diameter: 30 mm 6 spindle speeds: 3,000/4,000/5,000/6,000/8,000/10,000 rpm The machine does not have a motor brake and can therefore only be sold as a source of spare parts! Availability: Short-term Location: Flörsheim

Condition: used, Year of construction: 1987, Used machine Year of manufacture: 1987 Condition: fully overhauled Features and technical data: - Table size: 1100 x 760 mm - Motor: 4.7/5.7 kW, pole-switchable - With forward/reverse operation - Milling spindle: MK 5 / 30 mm - Height and tilt adjustment via handwheel - Spindle speeds: 3000/4500/6000/9000 rpm - Spindle tilt range: -5 to +45° - Milling fence with metal jaws - Mounted on round insert plate, therefore rotatable 360° - With table extension on both sides with retractable frame supports - Equipped with 4-roller power feed unit Weight: approx. 900 kg Images show the machine in unrefurbished condition Hjdpfx Aew I U U Dsahop Availability: approx. 4 weeks after order placement Location: Flörsheim