Used Riving Knife for sale (4,275)

Condition: used, Sharpening machine for profile cutters and straight grinders. . Grinding interlocked in 2 axes. Very easy to operate. Width of the tool max: 360mm Maximum cutting circle 350mm profile 300mm straight Minimum cutting circle 70mm Main motor power kW: 1.5 at 3000 rpm at 50 Hz. Wet grinding: Yes Kedpfx Afsnzkx Soisdu

Condition: good (used), 4 pieces of circular shear exchange frames including stands and tools (circular blades + stripper rings and spacer rings) Shaft diameter: 140 mm Band width: 1600 mm Price: 10,000.00 EUR / unit Kdsdpfx Aow Uqr Sofisu

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Kodpfxjwfq T So Afisdu Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container.

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Kdedodzqmzopfx Afiou Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: ready for operation (used), Shaft diameter: 145mm, sheet dimensions: 650x1.5mm, without tools. Ksdpof Nbd Ujfx Afiodu

Year of construction: 2022, operating hours: 50 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 3144, Automatic band knife protection Unwinding and winding device Precision knife guide Grinding device with precise guide Wheels with precision ball bearings Quick knife clamping device Excellent cutting quality High-quality workmanship Band knife protection device with electric drive Fully automatic band knife protection device, Electronically continuously adjustable knife speed from 2-30 m/s with digital display Continuously adjustable knife speed LED lighting device Precision knife guide below the table top Quick stop device Kjdpfx Aevmpu Sefiodu Table surface made of stainless steel Reinforced knife drive 2.7 kW / 2-30 m/s

Condition: ready for operation (used), functionality: fully functional, grinding width: 240 mm, type of input current: three-phase, Knife grinding machine WEINIG Rondamat 168 Max. tool diameter 3500mm Disk diameter 150mm Tool length 240 mm Main cutting edges up to 25° Motor 1, 1 kW Kodpsufcnqefx Afisdu

Condition: excellent (used), 2 units available: Roller - 50 In very good condition. Kdodpfx Ajh If Rvofiou

Condition: good (used), Horizon MKU-54 Mobile Knife Fully functional device, ready for production. Machine from the first owner. Very good condition. Horizon production, Japan Can be connected to any Horizon folding machine. Height adjustment, knife rotation by 180°, speed adjustment, reaction time, counter. Wiring included. Technical parameters: Max sheet size 540x330mm Min sheet size: 160x100mm Paper weight 35-220 gsm Power supply 230V Weight 250kg Ksdpfowxta Iox Afiedu

Condition: like new (used), - made in Germany - new knives and counter-knives TECHNICAL PARAMETERS: - feeding dimension 520x1000 mm - motor power 80 kW - four rows of knives Kjdpfx Afeqy Ek Heisdu - counter knife - sieve 20 x 20 mm - sieve dimension 1000 x 900 mm - rotor diameter 600 mm - rotation of shaft 830 rpm Overall dimensions of the machine 235x170x290 cm weight ~ 4000 kg

Year of construction: 2019, condition: ready for operation (used), An industrial knife grinding machine MVM for sharpening woodworking parts is available. Knife length: 6000mm, control: Siemens PLC with remote control. Includes an extraction system, a magnetic table, and a chip filter. Documentation available. An on-site inspection is possible. Kdsdpfx Ajw I E Eajfiou

Condition: used, Manual planer knife sharpener Weinig Rondamat 931 for sharpening and grinding profile knives and straight planer knives in the planer head using templates. Max. tool width: about 230 mm Grinding speed: infinitely adjustable Ksdow Au Rcopfx Afisdu Mandrel: 30 / 35 / 40 / 50 / 60 mm

Condition: used, Year of construction: 2010, functionality: unexamined, Weinig RS 2000 Kdedpfx Afewmw Dasisu

Condition: good (used), Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer -Manufacturer: Holac, knife holder for meat cutter multi-purpose cutter dicer Kodpewy Uglsfx Afiodu -Type: Mounting Ø 43 x 100 mm -Design/Dimensions: see photos -Dimensions: 420/436/H100 mm -Weight: 20.9 kg

Condition: new, 1 set of guillotine shear blades for a motorized guillotine shear Manufacturer: LAMI NOVA Kodpfoddzg Njx Afiodu Model: MS 3003 Cutting length: 3050 mm Cutting capacity: 3 mm Delivery time: immediately, subject to prior sale Options: Additional spare parts or service upon request Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: excellent (used), for automatic resharpening of knife edges, e.g. of chippers, with automatic feed reversal and automatic grinding head adjustment, clamping table 840 mm long x 140 mm wide, swivelling according to scale, grinding motor 1900 watts/380 volts, grinding wheel 175 mm Ø x 60 mm, new cooling water pump with steel tank, new electric cables, including 1 spare grinding wheel 175 mm Ø x 60 mm and 1 set of tools for wheel change Kjdpfx Afsuw T Hkoisdu

Condition: used, Year of construction: 2010, functionality: fully functional, Horizon Three-Knife Trimmer for sale! Machine in production in very good condition. Could be tested. Available immediately! Model: HT-101 Manufactured: 2010 Serial: 326003 Description Trimming blower TB -100 Feed guide HCG - 100 * Fully automated three-knife trimmer; * Can be used in-line or off-line; * Automated setup for different book sizes and precision cutting accuracy; * Job changeovers are performed simply and quickly through the color LCD touch-screen. There are very few replacement parts when changing over the HT-101; * Knife height and cutting depth are easily adjusted through the color LCD touch-screen. TECHNICAL SPECIFICATION: * Max. untrimmed book size: 410 x 320 mm * Min. untrimmed book size: 148 x 105 mm * Max. trimmed book size: 366 x 300 mm * Min. trimmed book size: 145 x 103 mm * Trimming width: fore-edge: 45 mm / top-bottom: 30 mm * Trim thickness: max. 100 mm / min. 5 mm (min. book thickness is 2 mm) * Production speed: 400 to 1600 cycles / hr Kdodpfeway N Sox Afisu

Condition: excellent (used), Year of construction: 1999, operating hours: 8,881 h, functionality: fully functional, grinding length: 1,000 mm, type of input current: three-phase, overall weight: 1,900 kg, grinding wheel width: 200 mm, control cabinet width: 1,000 mm, control cabinet height: 1,000 mm, Equipment: rotational speed infinitely variable, GOCKEL G50el in very good condition.includes 50 litres of grinding fluid,14 x200dia. Kdsdpfx Aow Efbwsfiou Grinding wheels 2 x bosses.

Condition: good (used), Year of construction: 1971, with magnetic table Kdodpfxsmccvae Afisu max. grinding length 2500 mm a frequency converter was retrofitted for infinitely variable speed of the grinding motor also a paper filter was retrofitted for filtering the cooling water

Condition: good (used), Cutter head, milling cutter holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, shoulder milling cutter -Cutter head: face milling cutter cutter head corner milling cutter -Type: Ø 100 mm -Hole: Ø 40 mm -Number: 4x milling head available Kedpfxowld Rks Afiodu -Price: per piece -Dimensions: Ø 100 x 50 mm -Weight: 1.3 kg/piece

Condition: new, 1 set of brand-new guillotine shear blades suitable for a hydraulic guillotine shear Kdodeddzg Eopfx Afieu Make: MEGOBAL Model: GH 2506 Cutting length: 2500 mm Cutting thickness: 6 mm Weight: 60 kg incl. wooden transport crate Delivery time: available immediately, subject to prior sale Options: Additional spare parts for guillotine shears and press brakes, as well as service, available upon request Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: like new (used), functionality: fully functional, Wadkin Visage blade grinding machine, Machine in excellent condition, extremely little use, condition close to new Can be seen in operation at our premises Price includes loading of the equipment Transport and installation possible at extra cost. Kjdpfx Aew Dqngofiedu

Year of construction: 2024, condition: new, Super Dumbbell – the ultimate punching knife with replaceable precision cutting blades Super Dumbbell has a spring type ejector, is equipped with 5 sets of precision spare blades and therefore represents a set of six punching knives in total. It is ideally designed for manual and pneumatic presses. Excellent price-performance-ratio “6 knives for the price of 1” Replaceable precision cutting blades • Japanese carbon steel: ultra-hard – ultra-sharp – maximum cut resistance • Easy replacement • No regrinding • No downtime • Ultra-thin symmetrical cutting blades minimize concave test specimen cross sections (Fig. 1) • No more premature tearing of the test bars • Up to 10 % higher tensile strength or elongation at break values • Extremely smooth cut surfaces of test specimens (Fig. 2) • Always available separately Guarantee for: • High-precision test specimens • Reliable and reproducible test results Kdjdpfoki Tqcjx Afieu Ideally suited for: • High polymer materials such as rubber, plastics, etc. • Standards of all kinds, such as ISO, DIN, JIS, ASTM, IEC, etc.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 3010-015, Equipment: documentation/manual, Trivet in excellent condition. Possible purchase of a device for rounding corners Expected price 15 K euros, but I will consider any reasonable offer Kdedpswf Rbiofx Afisu

Condition: excellent (used), Year of construction: 2019, Ref: 10965 . 2019 Horizon HT-1000V Variable Trimmer ONLY 1.7M books trimmed! Inline or offline variable three-knife trimmer capable of zero make-ready on book trim size and thickness changes. Perfect for short run production, and book of one production which can be achieved through barcode driven set-up. Features: Setup automatically on the fly by reading a barcode at the entrance of the trimmer. Also capable of automatic set-up from the operator panel for same size production runs. One-to-one book production with variable sizes can be produced. Both untrimmed and trimmed sizes can be variable, for true variable format production. Can be used solo or placed in-line with Horizon perfect binders. Kdodpfswu Sptex Afieu Specification: Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm/ 13.780” x 12.600” Limitation: Maximum length from the center to top or bottom is 175 mm/ 6.889”. Min. Spine Length 148 x Fore-edge Length 105 mm/ 5.825” x 4.130” Limitation: The minimum length from the center to top or bottom is 74 mm/ 2.91”. Trim Width: Fore-edge: Max. 110 mm/ 4.330” Min. 1 mm/ 0.04” Top and bottom: Max. 80 mm/ 3.150” Min. 1 mm/ 0.04” Trim Height: 1 to 65 mm/ 0.04” to 2.560” Production Speed: 400 to 1,000 cycles per hour (Higher production can be reached with piled books)