Used Hacker Knife Suppliers for sale (1,991)

Condition: new, Year of construction: 2024, Chopper Knife 40 x 40 concave Knife for Weima, Large ..... For almost all common chippers / shredders Iedpfxjbxu Dho Ahvstd From stock Bitburg Subject to prior sale

Condition: ready for operation (used), Year of construction: 1999, IMMEDIATELY AVAILABLE, chamber filter press from Häcker with base frame and 50 m3/h Abel pump, plate format 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake, content approx. 2700 liters, automatic. Plate transport, open outlet in filtrate trough on both sides, press is ready for use immediately after assembly, Abel pump was serviced by the manufacturer shortly before it was taken out of service, galvanized base frame with staircase, location is near Würzburg / Germany Iedpfx Aerunu Iohvotd

Condition: like new (used), functionality: fully functional, We are offering an as-new HÄCKER chamber filter press Type 01.120 with a new control cabinet. Electrohydraulics with a double-acting cylinder. Equipped with new filter plates, which can be configured as needed for your application. Includes the following additional equipment: - Automatic plate shifting device with automatic shaking system - Light barriers on both sides - Automatic filtrate drip trays Technical specifications: Condition: Demonstration unit, unused Plate size: 1,200 x 1,200 mm Number of chambers: optional, depending on plate pack and application Cake thickness: optional, depending on plate pack and application Capacity: 2,650 liters Iodpfxoyhn H Ts Ahvjtd Filter area: 175 m² Operating pressure: 10 bar Drive power: 2.2 kW Discharge is open via a filtrate corner and a filtrate trough. We can also offer you a matching HÄCKER piston pump for this filter press. For further details or technical questions, please feel free to contact us at the provided phone number or email address at any time.

Condition: used, functionality: fully functional, We offer a factory-refurbished HÄCKER chamber filter press type 01.080 with automatic control. Electrohydraulics with single-acting cylinder Elevated design for positioning underneath tipping containers Control of the feed pump with automatic press-full detection. Technical data: Condition: used, factory-refurbished Ijdpfxjyhnyae Ahvetd Plate size: 800x800mm Number of chambers: 40 Cake thickness: 25mm Volume: 500L Filter area: 44m² Feed pressure: 10 bar Open discharge via filtrate corner, with filtrate channel, drip plate available. We can also offer you a used HÄCKER piston pump to match this filter press. For further details and any technical questions, please feel free to contact us at the phone number or email address provided.

Condition: used, functionality: fully functional, We offer a factory-refurbished HÄCKER chamber filter press, type 01.080. Electrohydraulic system with single-acting cylinder Raised version for placement of tipping containers underneath Technical specifications: Condition: used, factory-refurbished Plate size: 800x800 mm Number of chambers: 40 Cake thickness: 25 mm Capacity: 500 liters Filtration area: 44 m² Operating pressure: 10 bar Itedpoyhnwlefx Ahvjd Open discharge via filtrate spout, with filtrate trough and drip plates. We can also offer a used HÄCKER piston pump to suit this filter press. For further details and technical questions, please feel free to contact us at the provided telephone number or email address at any time.

Condition: excellent (used), Year of construction: 1994, Weinig 925 Rondomat profile knife grinder Stock code: 15443 Price: request for quotation $ Subcategory: Knife grinders Producer: Weinig Model: 925 Condition: used Tag number: 15443 Machine type: Grinding machines UMCC: G6775 Producer: Weinig Model: 925 Rondomat Year: 1992 Serial number: 925-438 Description: Weinig 925 Rondomat profile knife grinder We offer turnkey services with this machine. Printable page Get a quote General technical data Shaft length 9-1/2 inches Maximum tool diameter 9 inches Motor 1.5 HP, 220/440 V 8-7/8 Maximum wheel diameter Variable grinding wheel speeds: 1700, 2000, 2250, 2800 rpm Itsdpfx Ajn Ut Slohvsd Relief angle for back relief: 15 - 45 degrees Axial: 0 - 10 degrees Cooling liquid

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate size 400 x 400 mm, 20 plates, open spout, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 60 liters, filter surface 5m², dimensions 2500 x 700 x 1500 mm, weight 1000 kg, engine hydraulics, drip tray, filtrate, with or without filter cloths, piston pump incl. Piping with built Itedpfsfbbpqsx Ahvod

Condition: refurbished (used), We offer various piston pumps from Häcker, PP design, various sizes from 1 - 10 m3/h, up to 10 bar, cpl. overhauled Isdpfxsikl Tpj Ahvetd

Condition: used, functionality: fully functional, In this offer you buy a used trimmer "Canon 2-Knife Trimmer A1" Object of sale: 1 x Canon 2-knife trimmer A1 suitable for various Canon models. Condition: This offer is for a used device, which may show signs of use Itodpfswpd Tyox Ahvjd (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: used, functionality: fully functional, In this offer you buy a used 2-Knife Trimmer ‘SDD B4K/BT25 2-Knife Trimmer for Xerox’ Object of sale: 1 x SDD B4K/BT25 for various Xerox machines Counter readings: Total: Approx. 37,158 cuts Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test brochure can be seen in the photo Itodpfx Aheu S An Dsvsd Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Year of construction: 1987, condition: ready for operation (used), Knife grinders for 800 kofama lignum strips Sharpening bar 800 used 1987 Rating: Table Model: 800 Description: Iodpeh S Upiofx Ahvjtd 800 grinders with a slat knife

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool Itsdpjif Ek Rjfx Ahvsd • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) Itsdpfx Ahsfnlkwevjd The machine is CE certified.

Condition: used, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection Isdswgc I Ropfx Ahvstd • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Equipment and technical data: - Motor 18.5 kW - Rotor diameter 248 mm - Hopper opening approx. 620 x 800 mm - Standard screen - 30 cutting knives - Extraction nozzle 160 mm Dimensions: approx. 1730x1160x1650 mm Weight: approx. 1100 kg Availability: short-term Storage location: Röllbach Itodpfx Ahsx H U Ngevod

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex location: Reform Knife Grinding Machine Type AR 18 Model 4 Year of manufacture: 1979 Grinding length: 1800 mm Iodpfoyvy Slex Ahvjtd Grinding width: 400 mm Drive: 4.5 kW Magnet: 1800 x 400 mm, swiveling Weight: 4 t Coolant system Price: EUR 5,500.— plus VAT, ex location.

Condition: ready for operation (used), Year of construction: 1977, Immediately available due to business closure: Reform Hydraulic Knife Grinding Machine Type AR 40 Type 40 Year of manufacture: 1977 Grinding length: 1000 mm Grinding head: 400 mm diameter Itjdjyvy R Uopfx Ahved Swivelling magnet: 1000 x 150 mm Coolant system Grinding motor: 4 kW Weight: 2 tons Offered at a price of EUR 3,250—plus VAT, ex location.

Condition: used, Year of construction: 2005, Three knife trimmer Müller Martini Esprit (1576) Year: 2005 For three side trimming of book blocks and brochures, operable in connection with book production lines. Description: - Colour monitor with touchscreen - Automatic setting - Infeed conveyor from the left - Left hand infeed - Exchangeable cutting tables, number: 3 - 11 - Sets of knives: 2 Technical specifications: - mechanical speed: up to 2.000 cycles/h - size range untrimmed max.: 391 x 320 mm - size range untrimmed min.: 148 x 95 mm - size range trimmed max.: 311 x 305 mm - size range trimmed min.: 142 x 75 mm - book thickness: 2 - 80 mm Iodpfx Aovxfkgjhvetd

Year of construction: 2024, condition: new, Knife gate valves by STAFSJO, model MV, D50 / 2". Max pressure: 16 BAR. Brand new product, never installed. Itedpfxoxv Ac Re Ahvsd

Condition: as good as new (ex-display), Durkopp adler -3-TRANSPORT Iodpfjhc Nbfsx Ahvjtd -1 NEEDLE WITH TRIM-KNIFE -THREAD TRIMMER

Condition: used, functionality: unexamined, For sale: knife balancer Net price: 230 Euro/unit We have 6 units available Isdpoyutmlefx Ahvjtd

Condition: used, functionality: unexamined, For sale: Motor for electric trimmer CHALLENGER II TRIMMER by FOOD INDUSTRY EQUIPMENT INTERNATIONAL I.N.C. Model CTPS1. Net price per unit: €800. We have 5 units available. Itsdpfxeyuqrxs Ahved

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Weinig Rondamat 980 Year 2010 Technical data: Max. tool width: 330 mm With PowerLock: 322 mm Tool flight circle: 100 - 300 mm With PowerLock (optional): 100 - 250 mm Grinding wheel diameter: 125 - 200 mm Spindle speed frequency-controlled: 1500 - 4600 rpm Grinding spindle drive: 1.5 kW Ijdpfxjwvvylj Ahvstd

Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. Bfywfrix Ijdpfxeh Aw Rne Ahvstd The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil. As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc. We have a ready-made solution for your business for hangars roofing buildings production. For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover For closing the standing seam lock our customers can use special standing seam roofing tools While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster.

Condition: used, offer consists of: extra knife for Horizon, set of 2 Itsdexr Adgjpfx Ahvod FC-20A + FC-20 - weight: Lower knife 1,02kg; Upper knife 1,90kg = 2,92kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs