Used Riving Knife for sale (2,461)

Condition: ready for operation (used), MM 890 trimmer 2 up attachment, castings only ! Nwjdpeir A E Djfx Ahkok

Condition: ready for operation (used), IN STOCK - Nwjdpfxoir E R Ae Ahksk 2 up kit to suit Muller Martini three knife trimmer 217/DSS/890

Year of construction: 2021, condition: new, Derryglan Ltd - offer a wide range of industrial washer for every application, food, meat, butcher, bakery, pharma, labs, processors and general industry. Washers for Utensils, Crates, Bins, Knife, Tray cleaning applications. JEROS Washers have a specially designed lid which opens fully to allow easy operation and loading without causing backstrain to operators. The special JEROS features provide easy installation of the machines. Even in the smallest production areas. Further, the machine can be used as a sink when not in use as an automatic Utensil Washer. The flush hose The flush hose makes it possible to reuse the wash water e.g. for cleaning the floors. The flush hose can also be mounted on the mixer tap if required. Mixer tap Built-in mixer tap allows washer to be used as a sink with separate drainage. Fulfils the highest hygiene standards Even the most persistent dirt is removed! The fully automatical detergent dispenser ensures the optimum dosage of soap. The powerfull pumps and rotating wash arms provide a brilliant wash result.The end rinse pump guarantees a constant temperature of 85?C during the entire rinse period and sanitisation of the utensils is achieved. An additional advantage of the high temperature rinse is the fast drying of utensils by evaporation, a rinse aid can be automatically added to assist with this process The New Generation The 9100 Series comprises a total of five new models: 9110 / 9115 with rotating wash systems and 9117 / 9120 / 9130 with wash frame system. Inside, the machines have been thoroughly redesigned, focusing on hygiene and easy cleaning. The inside surfaces and rounded to ensure quick and automatic flow of water back to the filter and pumps. Filters, wash arms and wash frames come in electropolished surface finishes leaving the stainless surface completely smooth to prevent dirt from sticking to surfaces of the machine. This makes it easier to clean and maintain the machine Efficiency and optimum hygiene safty, including HACCP, form the base of the JEROS, set of values. Energy saving up to 25 % All the machines are now available with 'i-version' as standard. This means that all machines have water saving rinse nozzles and that both the wash and rinse tanks are isolated, as also the lid is with double wall and isolated. The machines therefore require less operating power, resulting in energy and water savings of up 25 % for all the models. It is also possible now to set the machines to 'auto off', as required, so that they do not have to be left unnecessarily in standby mode if they are not used for prolonged periods of time, etc. Eco wash As standard all models includes an environmentally friendly 'ECO wash' programme for less dirty objects. Pushing 'ECO wash', the machines wash with a reduced wash temperature and use less soap. Still the rinse with 85? C hot water for guarantee of hygienic result New double Micro-Filter: Unique double filtration system, with a progressive micro-fine filter, provides an efficient filtration of the wash water - thus entails a perfect washing result with less soap consumption and minimal water consumption Larger particles are collected in a coarse filter, wereas smaller particles are captured in the self-cleaning micro-fine filter. During the washing/rinse process, the collected particles are drainet out of the micro-fine filter from the bottom, just as well from the surface of water. this ensure a constant optimum wash water quality Nwjdpegq N Ezsfx Ahkok

Condition: used, mileage: 154,477 km, power: 226 kW (307.27 HP), first registration: 01/2016, fuel type: diesel, number of seats: 49, gearing type: mechanical, emission class: euro6, color: other, brakes: retarder, total length: 12,330 mm, total height: 3,350 mm, Year of construction: 2016, Equipment: ABS, air conditioning, cruise control, = Additional options and equipment = - Air conditioning - Webasto heater = Further information = Damages: none Njdpfx Ajzki Ebjhkswk = Company information = We are an international company based in Belgium, near Brussels (+/-20 km). Belgian Bus Sales is your ideal partner for buying and selling used buses, featuring an extensive parking area serving as our showroom. We always have a large selection of buses in stock—various brands, capacities, models, and price ranges. We can find the right touring coach, school bus, or city bus tailored to your requirements or budget. All information is provided without guarantee. Subject to errors, prior sale, and typos. Viewing hours for used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mówimy po polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more.

Condition: used, mileage: 41,000 km, power: 115 kW (156.36 HP), first registration: 07/2023, fuel type: gasoline, next inspection (TÜV): 07/2028, color: black, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, Special equipment: Galvanized controls, Parking Assistant Package, Driving Assistant System: Parking Assistant, Driving Assistant System: Parking Assistance System (side), Driving Assistant System: Reversing Assistant, Driving Assistant System: Reversing Assistance System with Emergency Braking Function (Active PDC), Sun protection glazing (darkened rear) Nwsdpfx Ahszlvivokek Additional equipment: Storage Package, Airbag on passenger side can be deactivated, Airbag driver/passenger side, Equipment Package: Connected Professional, Service System: Remote Services, Exterior features: High-gloss Shadow Line, Exterior mirrors electrically adjustable and heated, Exterior mirrors in vehicle color, Turn signal integrated into exterior mirror, BMW Live Cockpit Plus, Service System: Intelligent Emergency Call including TeleServices, Service System: BMW Intelligent Personal Assistant, BMW Curved Display, On-board computer, DAB tuner (digital radio reception), Roof rails high-gloss Shadow Line, Anti-theft wheel bolts, Through-loading system (rear center armrest), Dynamic brake lights, Dynamic Traction Control (DTC), First aid kit, Driving Assistant System: Speed limit recognition with speed limit assistant, Driving Assistant System: Driving Experience Control, Remote unlocking of tailgate, Velour floor mats, Footwell lighting (front), Luggage compartment partition (net), Luggage compartment lighting, Speed limiter (Speed Limit Device), Rear lights LED, Interior trim: Interior trim Quartz Silver matte, Body: 5-door, Automatic climate control 3-zone with automatic recirculation control, Head airbag system rear, Head airbag system front, Rear headrests foldable, Steering wheel (sports/leather) with multi-function, Light alloy wheels, Model revision, Engine 2.0 Ltr. - 115 kW, Gasoline particulate filter (OPF), Park Distance Control (PDC) front and rear, Parking brake electric, Low emission according to emission standard Euro 6d, Turn signals LED, Side airbag rear, Side airbag front, Seat cover / upholstery: Fabric Hevelius, Mirror package, Exterior mirrors electrically foldable, Exterior mirrors with curb-assist function, right, Interior mirror with automatic anti-dazzle function, Start/Stop system (function), Solid paint, Warning triangle, Widescreen Display, Heat-insulating tinted glass, Windshield (version: climate comfort)

Condition: excellent (used), mileage: 235,198 km, power: 290 kW (394.29 HP), first registration: 08/2018, fuel type: diesel, tire size: 315/70 R 22.5, axle configuration: 4x2, wheelbase: 4,600 mm, fuel: diesel, fuel tank capacity: 500 l, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 4, total length: 8,700 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 5,960 mm, loading space width: 2,500 mm, loading space height: 2,770 mm, Year of construction: 2018, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, onboard computer, power assisted steering, power mirror, soot filter, spoiler, traction control, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Outside thermometer - Heated mirrors - Passenger seat - Leaf spring suspension - Sunroof - Roof spoiler - Differential lock - Digital tachograph - Speed limiter - Rear doors - Air conditioning - Air suspension - Air-suspended seats - Air horn - Particle filter - Radio/CD player - Rearview camera - Side door - Side skirts - Sun visor - Lane keeping assist - Stability control - Tow hitch = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 10,677 cc Nwodpfxezrlrys Ahkok Axle Configuration Tire size: 315/70 R 22.5 Brakes: Disc brakes Front axle: Max. axle load: 8000 kg; Steered; Tire tread depth left: 80%; Tire tread depth right: 80%; Suspension: Leaf spring suspension Rear axle: Dual tires; Differential lock; Max. axle load: 11500 kg; Tire tread depth left inner: 30%; Tire tread depth left outer: 30%; Tire tread depth right inner: 90%; Tire tread depth right outer: 90%; Reduction: single reduction; Suspension: Air suspension Weights Unladen weight: 9,235 kg Payload: 9,765 kg GVW: 19,000 kg Condition Technical condition: very good Optical condition: very good Identification License plate: 35-BLG-7

Condition: used, mileage: 91,400 km, power: 140 kW (190.35 HP), first registration: 10/2022, fuel type: diesel, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, soot filter, Special equipment: Vehicle without model lettering, metallic paint, tire repair kit (mobility pack), front seat heating, sun protection glazing (darkened at the rear) Nsdszp Svtspfx Ahkjwk Additional equipment: Storage package, airbag on passenger side can be deactivated, airbag driver/passenger side, equipment package: Connected Professional, service system: Remote Services, exterior features: Shadow Line high-gloss, exterior mirrors electrically adjustable and heated, exterior mirrors in vehicle color, turn signal integrated into exterior mirror, BMW Live Cockpit Plus, service system: Intelligent Emergency Call including TeleServices, service system: BMW Intelligent Personal Assistant, BMW Curved Display, on-board computer, DAB tuner (digital radio reception), roof rails high-gloss Shadow Line, anti-theft wheel bolts, through-loading system (rear center armrest), dynamic brake light, dynamic traction control (DTC), first aid kit, driving assistance system: Driving Experience Control, remote unlocking of tailgate, velour floor mats, front footwell lighting, luggage compartment separation (net), luggage compartment lighting, speed limiter, rear lights LED, interior trim: interior trim Quartz Silver matt, body: 5-door, automatic climate control 3-zone with automatic recirculation control, head airbag system rear, head airbag system front, rear headrests foldable, steering wheel (sports/leather) with multifunction buttons, light alloy wheels, mild hybrid 140 kW (engine 2.0 L - 140 kW diesel), model update, park distance control (PDC) front and rear, electric parking brake, low emission according to emission standard Euro 6d, turn signals LED, side airbag rear, side airbag front, seat cover / upholstery: fabric Hevelius, mirror package, exterior mirrors electrically foldable, exterior mirror with curb-automatic, right, interior mirror with automatic anti-dazzle function, start/stop system (function), warning triangle, widescreen display, heat-insulating tinted glass, windshield (design: climate comfort)

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 110SIS, compressed air connection: 6 bar, working width: 1,100 mm, warranty duration: 12 months, operating speed: 1,000 mm/s, Komfi Laminator Sirius 110 with HotKnife, Rotary Knife and Automatic Stacker New, Manufactured 2025 Ideal for commercial printing and packaging industry! Max. production speed: 60 m/min (5091 B1 sheets landscape/h); 50 m/min with hot knife (4243 B1 sheets landscape/h) Nwodpfjzia S Nex Ahksk Max sheet size: 1100 x 1100 mm Paper weight: 115-600 g/m² Dimensions (incl. automatic stacker): 7.08 x 2.71 m Min. sheet dimensions: 300 x 297 mm Max. paper pile: 1350 mm including pallet Thickness of laminating film: 24-50 μm Kind of laminating film: OPP, PET, Nylon Time of laminating roll warm up: 5 min Sheet overlap accuracy: 1.5 mm Consumption of compressed air: max 80 l/min Max. pressing force: 43 kN Max. linear nip pressure: 39 N/mm Double capacity for sheets in the high-pile feeder and for laminating film = reduced machine downtimes, increased machine efficiency. Square shaped feeder for B1 sized sheets to increase the machine productivity. Easy pallet placement. Energy saving zone heating system with fastest heat up time. Feeder: 2-way accessible high pile pallet feeder with Komfi double action feeding head. Precise and constant sheet overlap achieved thanks to the sheet registration system using a mis-feed sensor, front lays, accelerating in-feed pulleys and guiding plates to prevent thin paper from wrinkling. Laser guided pallet driving system with quick adjustable lateral stops and air nozzles. Combined air / vacuum compressor. Adjustable separation blowers for reliable separation of sheets from the pile and trouble-free loading of long sheets. Laminating Unit: High-polished chrome laminating roll, with deep drilled sensors located close to the film surface. Dry, low inertia multi zone heating system using resistance heater, temperature detection by deep drilled sensor with the touch-less signal convertor. Laminating rolls are belt driven to achieve outstanding sheet surface quality for special metallic and holographic films. Pneumatic nip pressure applied by durable polyurethane coated pressure roll, with nip stoppers for thick sheets and windows lamination. „On-the-fly” side adjustable air expansion unwind shaft, with automatic film tensioning and capacity detection. Height adjustable film spread roll to smooth wrinkles on film. Zone heating of the laminating roller keeps roll temperature even and saves energy when laminating small formats. Separator & Delivery: Pneumatic pull roll with adjustable nip force to create tension for sheet decurling. Dual roll/bar decurling adjustable unit with position detection to have sheet registered for its separation. Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Automatic stacker. Options: Film slitter to cut film to the requested width. Additional On roll perforator. Effect foiling device (OTF). Pallet fine positioning tool. Hot knife with variable rotation speeds for perfect separation of thick, PET and Nylon films that eliminates flagging. Antistatic bar removes static charge from the separator to avoid thin sheets wrapping onto the rollers. Air ionizer (behind the snapping roll) – helps smooth unloading of sheets on the unloading table without static charge. Windows lamination kit. Strip lamination kit.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 36AMN, compressed air connection: 6 bar, working width: 360 mm, warranty duration: 12 months, operating speed: 420 mm/s, Komfi Laminator Amiga 3680 with HotKnife (NearLine, Generation 1) Showroom Machine, Manufactured 2025 Specifications: Min. paper format: 200 x 250 mm Nwsdpfx Ahjzh S Ugskek Paper weight: 115 x 600 g/ m2 Thickness of sheets max. 0,7 mm: Overlap > 0 Thickness of sheets max. 1,4 mm: Overlap < 0 Suitable kinds of film: Polypropylene, Polyester, Nylon Film thickness: 24-50 μm Inner diameter of film reel: 3“ = 76,2 mm Outer diameter of film reel: 350 mm Output / laminating speed: 3-25 m/min(regard. technological conditions) Maximum output: - Average monthly capacity of machine: 100 000 B2 sheets Max. paper pile: 60 mm / length of sheet < 350 mm 30 mm / length of sheet > 350 mm Max. feeding table load: 20 kg Laminating temperature: according film manufacturer – max. 135°C Sheet overlap tolerance: ±1 mm Max. pressing force (0,6MPa): 15 kN Max. pressing force (0,8MPa): 19,5 kN (WARNING = limited life of the pressure roller) Max. linear NIP pressure, press 0,6 MPa: 60 N/mm / sheet width 250 mm 50 N/mm / sheet width 300 mm 41,6 N/mm / sheet width 360 mm Linear NIP pressure= 30 N/mm: sheet width 250 mm / 0,30 MPa sheet width 300 mm / 0,36 MPa sheet width 360 mm / 0,43 MPa Feeder: Bottom Suction Vacuum Feeder Laminating Unit: Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Rubber coated pressure roller. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk with adjustable air nozzles.

Condition: good (used), Year of construction: 1994, Roller conveyor, roller track, powered roller conveyor, roller track Nsdpfjzn Iw Djx Ahkjwk -Manufacturer: Gubisch, driven roller conveyor type RF 3.0 -Drive motor: Lenze 0.37 kW with variable gearbox -Speed: 10 to 46 m/min -Roller width: 250 mm -Roller diameter: 83 mm -Axle spacing: 130 mm -Conveyor length: approx. 2900 mm -Base: height adjustable -Pneumatic equipment: not functioning -Dimensions: 3000/470/H1120 mm -Weight: 281 kg

Condition: used, Industrial Eccentric Drive, Vibratory Exciter Unit, Shaker Drive Unit, Used machine Manufacturer: Unknown / Industrial execution Type: Eccentric drive with counterweights Condition: Used, robust industrial execution Overall dimensions: 760 x 530 x 410 mm Nwodpfxozwdz Re Ahkjk Design / Operation: Heavy-duty industrial mechanical shaker and vibratory drive unit, featuring dual output shafts with eccentric counterweights (exciter masses) in a rugged housing. Suitable Application Areas: Industrial vibrating screens and sieves: Mechanical excitation and drive unit for vibrating screeners, separators, and sifting equipment. Vibratory feeders and conveyors: Driving vibrating tables and feeder troughs used for bulk material handling (rubble, ore, coal, recyclable waste). Recycling and mining industry: Generating linear or circular vibrations for material separation and sorting systems under heavy-duty conditions.

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical data: Standard configuration: - Robust machine base - Dowel system for: Dowel diameter 8 mm, Dowel length 35 mm (factory setting, adjustable from 30 to 40 mm), Dowel protrusion 12 mm (factory setting, adjustable from 7 to 20 mm) - Recoil-free gun - Vibratory feeder for dowel transport - Dowel diameter and length control with Auto-DL-Select system - Water supply system for pre-glued dowels - Water tank (stainless steel, 7.5 l) - Closed water system with 6 bar water pressure and spray nozzle - Electronic control with: - Main switch On / Off - Program selector switch Water / Water + Feeding - Potentiometer for dowel feed via vibratory feeder Nsdpfx Aowx Aadehkjwk - Potentiometer for adjusting water injection quantity - Control lamp for indicating minimum water level in the water tank - Mobile base - Compressed air: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DübelJet with option for opposing hole processing: 1 unit HoKuTech | DübelJet with upgrade kit for LeimJet including fixtures for attaching/connecting to the DübelJet including height-adjustable suspension for glue hose including: 1 HoKuTech | LeimJet Glue dispensing unit for opposing hole processing Viscosity for PVAc glues up to 75,000 mPas Includes dowel nozzle for Ø 8 mm, pointed nozzle Location: Flörsheim Availability: Immediately

Condition: used, Year of construction: 2011, turning diameter over cross slide: 75 mm, turning diameter: 381 mm, spindle speed (max.): 3,500 rpm, spindle bore: 75 mm, travel distance Z-axis: 850 mm, total height: 2,325 mm, total length: 4,820 mm, total width: 2,100 mm, overall weight: 8,000 kg, CNC Lathe with Y-axis, driven tools and 2nd Spindle CNC Control Fanuc series 18i-TB Turning diameter 381 mm Spindle bore diameter 75 mm Spindle speed 3500 R/min Spindle motor 22/15 Kw Movement X-axis 190 + 69,5 mm Movement Y-axis +55 / -55 mm Njdpfjzv Smfjx Ahkewk Movement Z-axis 850 mm Movement W-axis (subspindle to mainspindle) 830 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper VDI 40 Bar feeder Irco-Breuning ILS MUK Spindle motor driven tools 4000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2008, turning diameter: 275 mm, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,345 mm, total height: 2,232 mm, total length: 4,339 mm, total width: 2,232 mm, overall weight: 7,600 kg, Equipment: documentation/manual, CNC Lathe with Y-axis, driven tools an 2nd spindle CNC Control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 / 366 mm Spindle bore diameter 80 mm Nedpfx Aozv Sf Uohkowk Spindle speed 4000 R/min Spindle motor 18.5/15 Kw Movement X-axis 260 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1345 mm Movement W-axis (subspindle to mainspindle) 1275 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper BMT Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 6000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Nwjdpfx Aoxwaz Hehkok

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 102387, on rollers with foot switch eyelet size 3.5 mm with rivet tool Nwsdpfx Ahezvypbekjk Height: 128 cm Width: 120 cm with table, machine only 70 cm Depth: 78 cm

Condition: ready for operation (used), Main drive unit of a Jensen Senking P72 SEW Eurodrive Nsdpey Ukq Aofx Ahkewk K127 UV2001.4

Condition: used, functionality: fully functional, mileage: 4 km, power: 35 kW (47.59 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 5,200 kg, empty load weight: 5,200 kg, operation weight: 5,200 kg, mast type: duplex, Year of construction: 2023, operating hours: 950 h, platform length: 6,500 mm, transport length: 2,240 mm, transport width: 44,145 mm, transport height: 2,315 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1600-TX3 pile driver with Automatice Leveling, is a versatile and high-performance machine, designed for efficient pile installation in construction, solar farms, guardrails, and infrastructure projects. With its powerful hammer, flexible mast movement, and operator-focused design, the MW1600TX-3 provides superior control and precision, even in challenging terrains. 90-Degree Rotating Platform: The upper body platform with the mast can rotate 90 degrees, allowing for precise pile placement without repositioning the entire machine. 15-Degree Mast Tilting: The mast can tilt 15 degrees left and right, providing greater flexibility on uneven or sloped terrains. Njdpfxozwm Els Ahkowk

Condition: good (used), Year of construction: 1997, The photo shows a Fanuc Series 0-M (a popular CNC controller used in the 1980s/90s). It supports X, Y, Z axis interpolation and a tool magazine. Features include a CRT screen and a classic push-button keyboard. 3. Electrical parameters (nameplate) Power supply: 3-phase, 380 V, 50 Hz Control voltage: (not specified, but typically Fanuc 110/220 V → transformer) Auxiliary voltage: 24 V Protection: 16 A (flink) Electrical diagram number: 711 792 01 01 4. Machine construction Vertical CNC machining center (milling machine) with a fully enclosed housing. Worktable with grid of holes for mounting workpieces. Carousel tool magazine (visible in the photo) – most often 12, 20, or 24 tools (depending on version). Automatic tool changer (ATC). Z-axis operates vertically (guideway assembly and telescopic way covers visible). 5. Typical technical data (for Chiron FZ 12/15 machines from this period) (values may differ depending on the model, but these are approximate parameters): Travels (X/Y/Z): approx. 500 – 700 / 400 / 400 mm Table surface: 800 × 400 mm (example) Table load: 200 – 300 kg Njdpow Uab Aofx Ahkowk Spindle speed: 20 – 6000 rpm (some versions up to 8000 rpm) Spindle taper: SK 40 (DIN 69871) Spindle drive: 7.5 – 15 kW (depending on version) Tool magazine: 12 – 24 tools Positioning accuracy: ±0.005 mm Rapid traverse: 30 m/min (X/Y/Z axes) 6. Application Metalworking (steel, aluminum, cast iron, light alloys). 📌 General information: • Manufacturer: CHIRON, Germany • Type: CNC machining center • Control: as seen in the photo (Fanuc Series 0-M) • Automatic tool changer • Heavy-duty worktable with workpiece clamping options • Solid industrial construction 📌 Machine condition: • Used machine, in good condition • Regularly serviced • Shows normal signs of use • Fully functional 📌 Application: • High-precision milling • Machining of metal components • Single-part and batch production

Condition: used, Year of construction: 1990, Type/Designation: 307-153/714-750 Nedow T U Ubspfx Ahkewk Serial Number: 82/293 Country of Manufacture: Made in West Germany (before 1990) Technical Data (approximate, for this type of CHIRON machine from the 1970s/80s): Machine Type: Column drill / single-station drilling machine for metal Motor Power: typically from 1.5 kW to 3 kW (three-phase, 380 V) Spindle Speeds: 100 – 4000 rpm (mechanically or electrically switched) Max. Drilling Diameter in Steel: approx. 20–25 mm (depending on the version) Spindle Taper: usually MT2 or MT3 Feed: manual or mechanical (some models equipped with automatic feed) Weight: several hundred kilograms (approx. 300–600 kg) Intended Use: serial production in industry (precise hole drilling, light milling operations in metals, use in production lines) Machine Table: cast iron, capable of securing workpieces Full control panel – variable speed adjustment available 2. Key Working Head Parameters (important for riveting): Press Force (kN) – if specified on the cylinder label or in the electrical box (often 10–30 kN for this size) Spindle/Slide Stroke (mm) – measure from top to bottom position Daylight (working clearance: distance between tool tip and table at top position) Throat Depth – from spindle axis to column (working reach) Max. Rivet Diameter / Work Range – specify based on tests or prior use Voltage: usually 380/400 V, 50 Hz 3. Dimensions and Logistics: L×W×H (of base/overall, in cm) Electrical Supply: 3×400 V, protection e.g. C16–C20 (indicate according to power rating) Weight (weigh with pallet jack with scale or estimate)

Condition: used, manufacture FESTO type CPX-CEC-C1 Nodezvhnfspfx Ahkewk We offer: 80 control units Manufacturer: FESTO Type: CPX-CEC-C1 Condition: Good used condition. Fully functional prior to removal. Accessories, tools, and clamping devices shown in the images are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: good (used), Year of construction: 2007, *Description:* Industrial column drill press *CINCINNATI CA NC320V*, year 2007. Nedpfxszvgn Re Ahkswk Made in France. High-end machine for precision drilling in a mechanical workshop. Column-mounted spindle with mechanical speed variation in 2 ranges. Cross table + vise included. Complete machine, available for inspection. *Specifications:* - *Make / Model*: CINCINNATI CA NC 320V 380 - *Year*: 2007 - Serial number 320838 - *Speeds*: 2-range variable speed: 80-625 rpm and 385-3000 rpm - *Spindle*: CM3 or CM4 taper, to be confirmed - *Table*: Cross table + vise, as shown in the photo - *Column*: Column with rack and pinion for motorized up/down movement - *Equipment*: Emergency stop, speed chart *Condition*: Very good condition. Recent and robust machine. On a pallet for removal. Testing possible on site. Removal by carrier.

Condition: used, Roller conveyor 2750/2180/1500-420-350 with chain drive RA2003 The roller conveyor with chain drive is in good condition (used) and fully functional. It has a SEW brand geared motor. The feet are not included in the scope of delivery. These are optionally available on request. Technical data: Condition: good (used) Conveyor belt length (FL): 2750/2180/1500 mm Nominal width (NB): 420 mm (outer width) Roller width (RB): 350 mm Usable width (NUB): 355 mm Nwodjk Abtaopfx Ahksk Side walls: stainless steel Castors: galvanized, diameter 50 mm Roller pitch: 65 mm (distance) Motor: SEW Eurodrive Drive: Chain drive with continuous chain, guided via tensioning device Electrical data: 380 V, 0.75 kW 3.7 A Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guide Frequency converter for infinitely variable speed control Availability: 3 identical tracks - individually customizable and combinable Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 1995, Rolling curve 45° with a criminal Conveyor curves, drive Centre Make: Transnorm Type: TS 2712 Year of construction: 1995 Nwodpjk Aa N Asfx Ahkek Project A49993 POS. 665 Conveyor angle: 45° Width: 500 mm constant speed V = 0.78 m/sec Role: slide stored with conical plastic molding and metal rollers without posts Optional columns Shipping weight: 120 kg on euro pallet Transportmasze: L x B x H = 1800 x 700 x 400 mm Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Roller conveyor 2750/2180/1500-420-350 with chain drive RA2003 The roller conveyor with chain drive is in good condition (used) and fully functional. It has a SEW brand geared motor. The feet are not included in the scope of delivery. These are optionally available on request. Technical data: Condition: good (used) Conveyor belt length (FL): 2750/2180/1500 mm Nominal width (NB): 420 mm (outer width) Roller width (RB): 350 mm Usable width (NUB): 355 mm Side walls: stainless steel Castors: galvanized, diameter 50 mm Roller pitch: 65 mm (distance) Motor: SEW Eurodrive Drive: Chain drive with continuous chain, guided via tensioning device Electrical data: 380 V, 0.75 kW 3.7 A Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guide Nwjdporvmtdjfx Ahkjk Frequency converter for infinitely variable speed control Availability: 3 identical tracks - individually customizable and combinable Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik