Used Ribbed Dressing Plate for sale (12,822)

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender Nodpfowk Rlxsx Ad Sewh roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: used, functionality: fully functional, machine/vehicle number: 7FBMF35-16267, Year of construction: 2013, operating hours: 6,500 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, Electric Forklift Truck – Toyota Year of manufacture: 2013 Technical data: • Model: Toyota 7FBMF30 • Load capacity: 3,000 kg • Drive: Electric (battery powered) • Mast type: Triplex with free lift • Lift height: approx. 4,300 – 4,800 mm • Fork length: 1,070 mm (standard) Nwjdpfxsw Hhwwo Ad Soh • Tyres: Solid rubber • Cabin: Open design, optionally with driver protection roof • Condition: Used, serviced and fully functional

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: PW2000-003, workpiece weight (max.): 2,000 kg, overall weight: 1,310 kg, table length: 1,400 mm, table width: 900 mm, The machine is in like-new condition! TECHNICAL DETAILS Maximum load capacity: 2,000 kg Tables and support surfaces Number of tables: 2 Support surface per table: 1,400 x 900 mm Swiveling movement Swiveling angle of the tables: 100° Angle of the load-bearing steel profiles: 90° Nedezd A Rdepfx Ad Sswh Table travel distances: approx. 300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 2,600 x 1,800 x 1,300 mm Machine weight: 1,310 kg Machine operating principle: The turning device consists of two opposing tables, each with a support surface of 1400 x 900 mm. On the side of the table that is facing downwards during swiveling, the load-bearing steel profiles are angled upwards by 90° in order to securely hold the plate to be turned even in a vertical position during the 90° swiveling process. Both tables are arranged opposite each other and are swivelled by 100° using hydraulic cylinders. The tables are mounted on a load-bearing substructure, on which one table is fixed and the other is movable relative to it. The movement is carried out by hydraulic cylinders, which can move the table, which is mounted on rollers, by approximately 300 mm. The substructure also supports the hydraulic and electrical components. A hydraulic unit serves as the drive source, supplying the cylinders with oil according to the control commands. The corresponding valves are electrically and/or hydraulically controlled and initiate and maintain the movements of the tables required for their interaction until the turning process is completed. Particular attention is paid to the safety of the movements and the precise adjustment of the table movement in the interaction between pressure and tension when designing the hydraulic system. The geometry of the axes of rotation of the tables results in a change in the load effect on the tilting cylinders. The hydraulics are designed in such a way that the required performance is ensured and an overload of the components is not possible during normal operation. Corresponding filters, combined with a generously sized tank volume, ensure a high availability of the hydraulic system. The necessary electrical control is completely housed in a steel sheet metal enclosure, which contains all the required components. The core of the control is a PLC, in which the operating parameters are processed according to the program specification. In addition, the emergency stop function and all the relays and output units required to control the functions are installed. The turning device is operated via a control panel in which a touch panel is used to input the function parameters, such as swivel table 1 up, swivel table 1 down, move table 1 forward, move table 1 backward, swivel table 2 up, swivel table 2 down, as well as start or stop the automatic mode. In order to avoid a collision of the tables in manual operation, the PLC programming is designed in such a way that this is prevented by the data on the table position and the respective table inclination. After the emergency stop situation has been resolved, the PLC control automatically completes the turning process. The turning device is equipped with heavy-duty rollers and can therefore be moved.

Condition: good (used), Year of construction: 2004, length 1020 mm width 600 mm height 70 mm total power requirement 28 kVA Nwjdpfxozhhbps Ad Sjh weight of the machine ca. 0,305 t Includes control unit Includes 6 clamping blocks

Condition: used, Approximately 200 pieces. The larger plates measure 2.45 x 1.22. The smaller plates come in various sizes. Nedpfx Adszhaf Ho Sjwh See images.

Condition: used, Plate Heat Exchanger,Heat Exchanger, SPX 034.MGS.10.1, Used machine Manufacturer : SPX Nwjdpfx Ajx Da Duod Ssh Year : 2012 Overall dimensions : 450 x 610 x 1360 mm Heat transfer area : 18.93 m² Operating pressure : 10 bar

Condition: used, Plate Heat Exchanger,Heat Exchanger, SPX 034.MGS.10.1, Used machine Nwsdpfjx Ttu Isx Ad Ssh Manufacturer : SPX Year : 2012 Overall dimensions : 450 x 610 x 1360 mm Heat transfer area : 18.93 m² Operating pressure : 10 bar

Condition: repair required (used), Sheet Metal Processing Unit, Decoiler, Straightener, Guillotine Shear, Reinhardt Maschinenbau GmbH Ras 228.60 Used Machine Manufacturer: Reinhardt Maschinenbau GmbH Model: Ras 28.60 Nwjdpfx Adjvkbrqj Sjh Maximum Sheet Width: 1500 mm Maximum Sheet Thickness: 1.5 mm Total Weight: 9350 kg Features: Decoiler Measuring Unit Sheet Straightener Guillotine Shear Electrical Data: Voltage: 400 V Power: 12 kW Frequency: 50 Hz Current: 35 A Note: The control panel display is not functioning.

Condition: ready for operation (used), functionality: fully functional, Plate rolling machine, 3000 mm capacity, H. Vuillot 3000 mm, used machine Nwsdswcqpnjpfx Ad Seh Manufacturer: H. Vuillot Sheet capacity: 3000 x 27 mm Top roll diameter: Ø445 mm Bottom roll diameter: Ø330 mm Year: 1972

Condition: used, Year of construction: 1985, machine/vehicle number: 5801, Plate drilling and burning machine FDB 600, Nwjdeibq Itjpfx Ad Soh The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment total power requirement: 30 kW max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm sheet thickness - min.:6 mm sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Lead roller conveyor: 6 m Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t

Condition: ready for operation (used), functionality: fully functional, Sheet straightening machine, 2100 mm,Sheet Metal Straightening, Plate Leveler Machine 2100 mm Used machine Nedpov Tpv Nofx Ad Sswh Maximum Sheet Width: 2100 mm (2100x8 mm) Maximum Sheet Thickness: 10 mm (1500x10 mm) Number of Rolls: 11 pcs Roll Diameter: 95 mm Electric Motor: Adjustable speed and direction Electrical Data: 400 V, 50 Hz, 36 A, 22.5 kW Includes a roller conveyor.

Condition: good (used), Manufacturer: Festo Machine Type: RSTC-U W40/7/500GL Overall size: 1600 x 900 x 1800 mm Plate width: 500 mm Number of castors: 6 Nodpfxohwta Eo Ad Sjwh Voltage: 380 V

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2100 x 1200 mm -Table height: 740 mm Nwodpfx Adsxnwblo Sjh -Plate thickness: 130 mm -Transport dimensions: 2100/1200/H740 mm -Weight: 2400 kg

Condition: used, sheet width 2540 mm plate thickness 2.00 mm thickness at "Niro-steel" 1.25 mm no. of strokes max. 63 Hub/min cutting angle 1.13 Grad table height 750 mm table width 320 mm distance between columns 2620 mm back stop - adjustable 5.0 - 550 mm Control konv. engine output 3.0 kW weight of the machine ca. 1600 kg range L-W-H 3100 x 1980 x 1400 mm Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - manual back stop, with analogue display * adjustable from the front * stepless adjustment over the entire travel range - recessed grips in the support table - 1x hold-down bar - 1x side stop - 3x support arms - 1x freely movable foot switch - operating instructions (PDF) Special accessories included: - sheet metal holding device for thin sheet metal cuts Nwsdpfxexacfte Ad Sjh

Condition: used, Year of construction: 1997, sheet width 0610 mm plate thickness 1,5 mm distance between columns 650 mm front stop - adjustable 0- 300 mm angle stop 45-90 Grad operating pressure 6 bar strokes per minute 60 total power requirement 3 kW weight of the machine ca. 0,27 t Nodpfxsxu Nrps Ad Sowh dimensions of the machine ca. 1 x 1 x 1,5 m

Condition: used, Year of construction: 1971, sheet width 2000 mm plate thickness 16 bei St 42 mm passage width 2250 mm impact length 1000 mm blade length 2005 mm throat 600 mm cutting gap adjustment 0,05 - 0,95 mm cutting angle 1° 40' ° down holder 10 Stück back stop - adjustable 10 - 1000 mm table: 2500 x 700 table height over floor 800 mm quantity of oil 900 l Nsdpfx Adoww Nccs Sowh weight of the machine ca. 10 t dimensions of the machine ca. 3 x 2,3 x 2,3 m voltage 380 V Food switch, material support beams, spare knifes.

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm stroke 300 mm table width 820 mm table height over floor 1215 mm Number of downholders 12 St. cutting angle 0,5 - 2,5 ° cutting angle adjustment 1- 2,5 ° back stop - adjustable 0- 1000 mm total power requirement 30 kW weight of the machine ca. 19 t dimensions of the machine ca. 3,8 x 2,65 x 2,85 m Nodpfet Tqkdex Ad Sjwh Machine was overhauled in 2010 and was modernized with light barrier at table. Machine has an automatic back stop with DRO. Cutting angel is adjusted by motor. Cutting gap is manually adjusted by adjustment of table. Along with the machine we supply a loading/unloading table.

Condition: good (used), functionality: fully functional, Year of construction: 2015, Four-Roller Plate Rolling Machine Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Technical Specifications Brand: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Working width: 2050 mm Roll geometry: Linear guides Top roll diameter: 225 mm Bottom roll diameter: 210 mm Side roll diameter: 165 mm Bending force against top roll: 100 t Motor power: 9 kW Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4,200 kg Performance Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm From tube diameter: 1,125 mm Nwodpfx Aezguumed Seh With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 295 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 1,125 mm With yield strength: 360 N/mm² Rolling capacity (full working width): 6.5 mm Pre-bending capacity (full working width): 5 mm From tube diameter: 295 mm With yield strength: 360 N/mm² Rolling capacity (half working width): 15 mm Pre-bending capacity (half working width): 10 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Equipment - Double linear guide system for roller movement - Extra wide bearing blocks - MCS double bearing system for roll rotation - Extra heavy-duty, doubly supported drop end bearing - Electronic parallelism system (EPS) - Hardened rolls for maximum wear protection and reduced sheet damage - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop and CE certification - Water cooler for hydraulic unit All details without guarantee. A live demonstration under power is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2009, roller diameter: 1,000 mm, overall weight: 800 kg, total length: 1,880 mm, total width: 1,100 mm, total height: 1,640 mm, HIGH Output of round shaped metal parts Can be used rolling bend segments, T-Pieces, Nipples, Tubes Automatic feeding tab;le Nedpfx Aszgugvjd Sswh Cutting speed 2 - 10 M/Min Max. out side diameter 1000 mm Rolling width: 1000mm Rolling thickness prebending:1mm Length: 1880mm Width: 1100mm Height: 1640mm Weight: 800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2004, Number of T slots: 8 + 3 Jump from T to T: 280mm Nwjdpfx Adewu D Afs Soh T size: 22mm Number of matching pieces:5 Length: 1250mm Width: 750mm Height: 2500mm Weight: 2900kg

Year of construction: 2024, condition: new, Mobile panel transport cart Nsdow I Upnjpfx Ad Sswh New demo unit, year of manufacture: 2024 - Stacking of panel heights up to 1,600 mm, electrically operated - Tilt angle forward/backward 100°, electrically operated - Head joint rotation angle CW/CCW 180° - Head joint rotation angle: 360° - Load capacity 120 kg - Panel sizes up to 2,100 x 3,200 mm - Total height 2,090 mm - With 6 high-performance suction pads, width adjustable The Mobilifter ML-120 consists of: - A mobile chassis - An electric lifting and tilting system - An automatic vacuum unit - A wireless electric control - Weight 170 kg Availability: short notice Location: Flörsheim

Condition: new, Universal panel transport assistant Ideal, space-saving aid for edge banding machines, panel saws, and all other processing machines where the workpiece needs to be moved. Height-adjustable panel transport assistant Working height infinitely adjustable from approx. 900 mm to approx. 1,200 mm Special polygonal body with anti-slip coating for optimal grip in any position 5 heavy-duty swivel castors with high-quality locking mechanism for stable standing Automatically moves along edge banding machines and panel saws Nodpjw I Uz Rjfx Ad Sowh Weight: approx. 8 kg Availability: in stock Storage location: Hochheim

Condition: used, Plate trolley as a welded construction made of steel Nodpfx Adewkbaye Sowh used one-sided loading area made of plywood 5° incline Side bar height: 915 mm Trolley powder-coated RAL 5010 gentian blue permanent or surface-protected impact and scratch-resistant tires made of thermoplastic rubber on plastic rims with precision deep groove ball bearings, gray, "no marks" thread and foot protection 2 swivel castors with wheel locks and 2 fixed castors 1500 x 370 Wheel diameter (mm)200 x 40 Load capacity (kg)500 Weight (kg)47.5 Dimensions (WxDxH, mm)1500 x 680 x 1200 Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and Technical Data: - For classic nesting processing with wear plate - Machine frame of welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry-type traveling column - Helical rack and pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Max. support area on nesting table: X = 3100 mm, Y = 1560 mm - Max. traverse paths: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - Arranged in U-shape - 5+4 in X direction, 4 in Y direction Nwjdpfx Adjwka Upe Seh - 32 mm spacing - Max. drill diameter: 35 mm - Total drill length: 70 mm from screw-on end (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternating clockwise/counterclockwise - Speed (max): 1000 - 4400 rpm, infinitely variable - Tool holder: M10 thread, 11 mm fit - Without tool, without holder - 6 horizontal spindles: - 2 double drill spindles in X direction - 1 double drill spindle in Y direction - Tool holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from screw-on end - Without tool, without holder - Milling unit 7842: - Power: 12.0 kW (S6) - Max. speed = 1000 - 24,000 rpm, infinitely variable - Max. power at 12,000 to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid bearings) - Tool weight max. 6 kg (incl. holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety enclosure according to CE standard - Side and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Personnel safety ensured by light barriers in the front machine area - Hand-held control device for remote operation of the machine with the following functions: - Start/stop of the processing program - Control of processing cycle speed - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional sealing against dust via pressurization in each guide carriage

Condition: used, Plattenbelichtungssystem / CTP Plate Maker Heidelberg TopSetter 102 Serial-No. 2310 Year 2001 Nwsdszgfvhjpfx Ad Soh Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test