Used Reversing Gear for sale (12,600)

Condition: used, Gear motor, electric motor -Speed: 27 rpm -Power: 0.055 kW -Construction: B5 angle Dodpfx Aect Erfoiiekw -Diameter shaft: Ø 14 mm -Protection class: IP 54/65 -Price: per piece -Number: 2x available -Dimensions: 280/150/H160 mm -Weight: 5.4 kg

Condition: used, Gear motor, electric motor, electric gear motor Dedpfx Aioct Er Esiokw -Speed: 8/77 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 44 -Brake: 220 V -Price: per piece -Number: 1x available -Dimensions: 590/200/H270 mm -Weight: 36 kg

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range: 21-105 rpm -Motor: adjustable -Drive shaft: Ø 25 mm Dkjdpfjct Er Hex Aiijw -Construction: hollow shaft -Number: 1 piece of motors available -Price: per piece -Dimensions: 565/200/H280 mm -Weight: 33 kg

Condition: as good as new (ex-display), Geared Electric Motor, SEW-EURODRIVE 0.55 kW, Used Machine Manufacturer: SEW-EURODRIVE, Bruchsal, Germany Dkedpfx Aezk Aupoiisw Type: S77 R37 DRS71M4BE1 Part Number: 01.1951560301.0001.14 Power: 0.55 kW Motor Speed: 1360 rpm Output Speed: Extremely low, only 3.5 rpm! Maximum Torque: 1100 Nm Frequency: 50 Hz Voltage: 220–242 V Δ / 380–420 V Y Current: 2.80 / 1.62 A Extra: Equipped with a factory-installed safety brake (BE1). Output Shaft Diameter: 45 mm Overall Dimensions: Width: 740 mm Depth: 390 mm Height: 320 mm Weight: 70 kg

Condition: used, Year of construction: 1980, max. wheel diameter 1010 mm gear width 0 mm max. module min. module total power requirement 15 kW weight of the machine ca. 9,5 t dimensions of the machine ca. m Max. depth of tooth 10 mm Max. workpiece Ø (for clearance) 1,010 mm Max. external Ø of coupling 610 mm Sliding base withdraw 216 mm Max. distance from grinding wheel to workpiece nose 90 - 430 mm Max. weight of workpiece, including clamp 500 kg No. of teeth 32 to 150 Grinding wheel Ø, approx 152 - 320 mm Grinding wheel speeds, infinitely variable 0 - 3,600 rpm Work spindle bore 60 mm Total electrical load, approx. 15 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features * Automatic roughing and finishing process via pre-settable counter and built-in feed cam. Dkedpot Hwniofx Aiisw * Counter for number of teeth. * Counter for number of dressing cycles. * 2 built-on dressing units with three dressing diamonds for radius dressing, side dressing and wheel end dressing. * Built-on index plate for 48 teeth. * Separate coolant device with band filter. * Separate hydraulic unit. * Separate TRION oil mist exhaust. * Various small parts.

Condition: used, Year of construction: 1997, max. wheel diameter 215 mm gear width 40,65 mm Dsdpfjt Hwxhox Aiiokw max. module total power requirement 20 kW weight of the machine ca. 10 t Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. * Extensive coolant equipment with filter system, band filter, etc. * Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing. * Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional "dressable" aluminium oxide material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times. Condition : Very good - machine can be inspected here under power Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, Year of construction: 1983, workpiece diameter 250 mm centre distance 0 mm honing length max. mm max. module 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Dkodpot Hwzpsfx Aiiew Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. * Sliding doors with foot switch. * Separate hydraulic unit. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. We have a large selection of gear machines available. Please let us know your requirements.

Condition: used, TECHNICAL DETAILS - maxi module to be cut : 1.5 [mm] - maxi diameter to be cut: 70 [mm] - maxi length to be cut: 100 [mm] - part maxi length: 200 [mm] - number of tooth mini to be cut: 3 - number of endless screw threads (special accessories): 1 - helix angle: 0-90[°] - milling tool maxi diameter: 50 [mm] - 11 milling tool normal speeds - speed normal machine: 226 – 2100 [rpm] - power: 1.5 [kW] - net weight: 1035 [kg]. EQUIPMENT - with part loader Dksdpfx Asuhbpleiiow

Condition: used, TECHNICAL DETAILS - part holder spindle speed : 1500 [Rpm] - tool holder spindle speed : 3000 [Rpm] - max part Ø : 50 [mm] - dimensions : 2820 x 2400 x 2500 [mm] - weight : 4200 [kg] EQUIPMENT - CN SIEMENS 840D - STAUBLI robot 6 axes TX60 with CS8C control - deburring device Djdpjuhbp Eefx Aiijkw

Year of construction: 2012, condition: used, max. wheel diameter 180 mm gear width ca. 220 mm max. module 3 / 5 mm Control Siemens 840D sl max. radial velocity 5000 mm/min max. workpiece diameter 180 mm table rotation speed 800 U/min table diameter 145 mm axial travel 250 mm mm axial travel 300 mm clamping force max. 13 kN swivelable +/- 45 ° drive capacity 23 kW turning speeds 6000 U/min diameter of tools max. 90 mm tool clamping length max. 211 mm Djdeymf Dajpfx Aiiokw module hobbing max. 3 module profile milling max. 5 tangential speed max. 7500 mm/min weight of the machine ca. 9,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m Equipment / Accessories: - The machine is equipped for dry milling. - workpiece magazine - parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mm

Condition: used, Year of construction: 2013, max. wheel diameter 260 mm gear width 320 mm max. module 4,5 min. module 0,5 Control SIN 840D max.helical angle +/- 45 ° Djdpfx Aox R U Hgoiiokw total power requirement 68 kW weight of the machine ca. 15,50 t dimensions of the machine ca. 3,25 x 3,25 x 3,30 m Fire extinguishing system Siemens Sinorix TM Knoll Filtering system VL1500/8000 year 2017 Wekal loading cell

Condition: excellent (used), Geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Chiaravalli, worm gear motor -Speed: 54 rpm -Transmission: Type CBFV040 i 25 -Engine: Type CHT 63C4 B14 0.22 kW -Protection class: IP 55 -Hollow shaft: Ø 18 x 78 mm -Quantity: 1x geared motor available Dodpjx Rw H Nefx Aiiokw -Price: per piece -Dimensions: 315/118/H155 mm -Weight: 7 kg/pc.

Condition: used, functionality: fully functional, machine/vehicle number: 40/35-22, Price on request Dedpfx Aijwl Aunoiekw Used Gear Grinding Machine Brand: NILES Type: ZSTZ 630 C3 Max. gear diameter = 630 mm Tooth width = 215 mm Module = 1 – 12 Number of teeth = 5 – 140 Table diameter = 500 mm Stroke = 500 mm Grinding wheel diameter = 270 – 350 mm Swivel range = 45° Strokes = 75 – 315 per minute Weight approx. = 6.3 t

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, CNC Spiral Bevel Gear Cutting Machine Gleason No 631 Year of manufacture: 2011 Control: SIEMENS 840d Dsdpfxew Tfb Se Aiiekw Retrofitted in 2011/2012 with new control, drives, etc. The machine was fully overhauled in 2011. A new control system and drives were installed.

Condition: good (used), Year of construction: 2020, Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: SEW-Eurodrive, spur gear motor -Type: RF47 DRN80M4/DI/KD1/TF/E18Z i 47.75 -Speed: 30 rpm -Power: 0.75 kW -Shaft: Ø 30 x 60 mm Dsdpfxjxl Sbno Aiijkw -Protection rating: IP54 -Number: 4x geared motors available -Price: per piece -Dimensions: 510/230/H200 mm -Weight: 28 kg/pc.

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Boehringer-Sturm- Variator-gear-box model D 57 ZK Dodew D T Sbspfx Aiiekw Input speed: 1.500/min. Output speed: 0 - 1.320/min.

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor, crane motor -Manufacturer: ABM Greiffenberger -Engine: Type 3G225F/132 / D 80 b-4 -Power: 0.75 kW -Speed: 4 rpm -Design: B5 -Shaft: Ø 65 x 105 mm -Protection class: IP 54/55 -Dimensions: 705/305/H400 mm Dedpfxjxamghj Aiiokw -Weight: 106 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 5.5 kW (7.48 HP), overall weight: 347 kg, torque: 8,000 Nm, SEW Eurodrive KH107/T DRN132S4/BE11HR/ASE1/TF Dksdozrbgmjpfx Aiijw Manufacturer: SEW Eurodrive Type: KH107/T DRN132S4/BE11HR/ASE1/TF Serial Number: 01.8125801502.0001.22 Technical Data Speed [rpm] 1461 / 12 Total gear ratio [i] 121.46 Max. torque [Nm] 8,000 Output torque [Nm] 4370 SEW service factor 1.85 Mounting position IM M4B ISO designation CLP 220 Lubricant type Mineral oil Lubricant quantity [l] 31.50 Motor power [kW] 5.5 Motor frequency [Hz] 50 Duty cycle S1-S10 S1 Motor voltage [V] / Switching method 230/400 Delta/Star Rated current [A] 18.20 / 10.50 cos phi 0.84 Thermal class [°C]/Protection class [IP] 155(F) / 54 International efficiency class IE3 Efficiency (100% Pn) [%] 89.6 Efficiency at 50/75/100% Pn [%] 90.6 / 90.6 / 89.6 Ambient temperature min. [°C] -20 Ambient temperature max. [°C] 40 Brake voltage [V] / Brake torque [Nm] 400 AC / 80 Brake rectifier TS BGE1.5 Nameplate: German Weight 347.00 kg SEW Eurodrive gear motors – various types immediately available Several high-quality gear motors from the manufacturer SEW-EURODRIVE are available for sale in various sizes and designs. These drives are ideal for use in machinery and plant engineering, in conveyor technology, and for numerous industrial applications. Available types 1. SEW KH107/T DRN132S4/BE11HR/ASE1/TF Motor speed: 1,461 / 12 rpm Total gear ratio: i = 121.46 Max. permissible torque (Ma max): 8,000 Nm Output torque: 4,370 Nm 2. SEW KH77 DRN90L4/BE2/DI/DFC/IV Incl. decentralized inverter: DFC20A-0055-503-A-T00-001/B Drive speed: 2,900 rpm Output speed: 33 – 1.6 rpm Total gear ratio: i = 88.97 Max. permissible torque (Ma max): 1,550 Nm Output torque: 645 Nm 3. SEW KH67/T DRN90L4/BE2/ASB1/Z Speed: 1,461 / 26 rpm Total gear ratio: i = 57.28 Max. permissible torque (Ma max): 820 Nm Output torque: 560 Nm 4. SEW K57 DRN80MK4/BE1/ASB1/Z Speed: 1,435 / 13 rpm Total gear ratio: i = 108.29 Max. permissible torque (Ma max): 600 Nm Output torque: 395 Nm 5. SEW KH37 DRN71M4/BE05/DI/DFC/IV Incl. decentralized inverter: DFC20A-0020-503-A-T00-001/B Drive speed: 2,900 rpm Output speed: 30 – 1.5 rpm Total gear ratio: i = 97.81 Max. permissible torque (Ma max): 200 Nm Output torque: 177 Nm General information Manufacturer: SEW-EURODRIVE Robust industrial quality Various power and torque ranges available Some with integrated decentralized frequency converter (DFC) Ideal as a replacement drive or for new projects If you are interested, we will gladly send you further information, photos or the nameplates of the individual drives. An inspection can also be arranged upon request.

Condition: good (used), Year of construction: 1987, functionality: fully functional, overall weight: 1,900 kg, total length: 1,690 mm, total width: 1,260 mm, total height: 815 mm, gear ratio: 200, torque: 65,000 Nm, shaft diameter: 200 mm, 2 units of 4-stage industrial gearboxes used in winch applications. Manufacturer: Asug Penig, GDR Type: TGL 34611/10A8-450x200 Year of manufacture: 1987 Maximum torque: 65000 Nm Gear ratio: 200:1 Actual gear ratio: 200.364 Dksdpozw H Hiefx Aiiew Power: n1 950 rpm = 33 kW n1 710 rpm = 24.6 kW Dimensions: Shaft d1: Ø 45 mm x 110 mm Shaft d2: Ø 200 mm x 350 mm Shaft height h1: 400 mm Length: 1690 mm Width without shafts: 560 mm Width with 2x shafts: 1260 mm Height: 815 mm Weight without oil: 1900 kg (For design A8, the weight increases to approximately 2000 kg) Oil capacity: 68 kg The TGL 34611 series of gearboxes for conveyor systems and hoisting equipment includes three- and four-stage gearboxes with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing for a given size are the same for both the three- and four-stage versions. In the four-stage version, the drive shaft is located below the plane of the components. The housing is made of cast iron. The gearboxes can be operated in both directions of rotation.

Condition: good (used), Year of construction: 1992, weight 5,5 t Table tip diameter: 35 mm Tip height above table: 75 mm Counterholder tip diameter: 50 mm Counterholder tip stroke: 40 mm Minimum center-to-center distance: 20 mm Minimum measuring height above table: 50 mm Maximum measuring height above table: 800 mm Table diameter: 500 mm Base circle diameter: 0–1000 mm Maximum rolling path: ±115 mm Maximum workpiece weight: 2000 kg X-axis: 230 mm Y-axis: 530 mm Z-axis: 750 mm Max. workpiece diameter: 1000 mm Software for new PCs: Windows 11 Bevel gear software, if desired, available only on Metrotek installations Additional information: Dkedpfx Aijzidz Ioiew - Machine calibrated according to DAKKS on November 19, 2017

Condition: excellent (used), functionality: fully functional, Gear shaper Tos OHA50A v, No. 0440253 Dodpfx Aiozxnuwoiskw In very good condition, rated 9/10.

Condition: as good as new (ex-display), 3 Pcs. “UNUSED – SEW R147 DVE280S4” for Sale Also many other Geared Motors on stock. Manufacturer: SEW Eurodrive Type: R147 DVE280S4 Power: 75 kW Voltage: 230 / 400 V Dodjglvvujpfx Aiijkw Amperage: 240 / 137 A Hertz: 50 Hz Ratio: 8,26 : 1 RPM in/out: 1.480 / 179 Shaft ø out: 110 mm Weight: 887 / 952 kg

Year of construction: 1987, condition: ready for operation (used), Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible. Djdpjrgahxsfx Aiijkw

Year of construction: 2019, condition: ready for operation (used), A Frenco workshop gear testing device is available. Bed length: 590mm, min. center distance: 45mm, max. center distance with fine adjustment/without fine adjustment/without intermediate plate: 105mm/155mm/320mm, repeatability: 1.5µm, intermediate plate length: 210mm, max. worm diameter: 78mm, center distance (worm lengths): 0mm-220mm, measuring table dimensions X/Y/Z: 800mm/700mm/940mm. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible. Dedey Ax Thopfx Aiiekw

Year of construction: 1992, condition: ready for operation (used), Gear diameter range: 10mm-330mm, gear width: 180mm, max. module: 7, min. module: 0.5mm, clamping length: 420mm, number of teeth range: 10-600, helix angle: +/-45°, speed: 1900rpm, grinding wheel diameter range: 280mm-350mm, grinding wheel width range: 84mm-104mm. Machine dimensions X/Y/Z: approx. 4500mm/6000mm/2300mm, weight: approx. 5100kg, control: Fanuc Series 160i-T. Documentation available. An on-site inspection is possible. Dkjdpfszg Iq Iex Aiijw