Used Resin Plant for sale (3,194)

Condition: good (used), Year of construction: 2022, operating hours: 2,100 h, functionality: fully functional, Equipment: Nedewnfwqjpfx Abgjdd Basic Package Inventhor Type 6 Load-sensing system Fuel tank 500 liters Longitudinal conveyor: length 2,900 mm, width 800 mm Centrally arranged lubrication strips 24V electronic control – additional electric pump to operate the following functions when the engine is off: "raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Special Equipment: Powertrain 310 kW - EV 3-axle drawbar trailer chassis unit Shredding system Size L 600/4 - 30 Z Additional hydraulic connections 35 - 80 l/min Hydraulic drive Rear conveyor 4.9 m Overband magnet neodymium Frame for overband magnet

Condition: good (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 12/2026, type of input current: three-phase, overall weight: 1,000 kg, König Mini Rex 4000-S with Proofing Cabinet G 2000 For round, stamped, long-rolled and long-rolled with overlap, as well as rustic bread rolls Head machine, 2 rows, swivels up to 45° SK63 + RK 58 Weight range: 45-100g / 30-80g Capacity up to 2,400 pcs/h Proofing cabinet, 2 rows, with long roller and stamping unit Capacity up to 2,000 pcs/h Used machine Ndsdswyrumopfx Abgod Delivery service Visit our large bakery machinery warehouse!

Condition: used, Used stainless steel pilot plant belt dryer by Neuweiler AG (CH). Dryer has a belt designed in stainless steel net, with total width 300 mm, working width 250 mm. Total length of belt about 830 cm. At the feeding section there is a rotating turbine with adjustable rotation and height, for proper positioning the product on the belt. Turbine is driven by el motor 0.18 kW. Drying chamber has insulated walls and has working length 207 cm. Belt is driven by reducer and el motor 0,55 kW, 1380 rpm, 230/400 V, 50 Hz. Working speed of belt is adjustable. Dryer is equipped with stainless steel main air blower driven by el. motor 11 kW. Air is transfered via chamber with electric heaters and is blowing on the belt from the top. There is also exhaust fan. Dryer has electric cabinet and local control panel. All is mounted on stainless steel frame with 6 legs. Nodpfxexyxnqo Abgjdd

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake port : 300 mm nominal motor power : 7,5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow : 6000 m³ / h Nominal volume flow : 5.089 m³ / h Negative pressure 2.587 Pa Filter area 30 m² Dimensions (L x W x H) in mm 3.000 x 1.361 x 2.817 Briquetting capacity 30 - 50 kg / h Briquette diameter: 50 mm Weight: 1570 kg Nodpfeh D If Hsx Abgsdd Machine is brand new in our STOCK - IMMEDIATELY AVAILABLE - subject to prior sale Location: 54634 Bitburg

Condition: refurbished (used), Year of construction: 1991, Components of an asphalt mixing plant TELTOMAT mixing material silo with bucket elevator Screen and drying drum 2-shaft compulsory mixer 30,000 L heating oil tank AMECO filter system Bitumen tanks Silos with screw conveyor Nodpfxstph A No Abgedd

Condition: used, Year of construction: 2000, Storage location: Nattheim Ndsdpfjvwdmwex Abgod

Condition: used, Year of construction: 2019, operating hours: 6,680 h, functionality: fully functional, overall weight: 19,000 kg, power: 390 kW (530.25 HP), Equipment: Basic Package AK560 Eco-Power: - Central axle trailer chassis with 2 axles, 80 km/h road approval Nedpsw Swpfjfx Abgsdd - Brake system incl. ABS and lighting according to EC directive - 50 mm EC towing eye with bolt-on shoe - Tyres 385/65 R22.5 - Hydraulically adjustable support leg - Splash guards (inner and side-mounted mudguards) - Permissible total weight 19,000 kg - Mercedes/MTU diesel engine 6R1300, 390 kW at 2,000 rpm, meets EUROMOT IV emission standard - Load-dependent feed control incl. automatic reversing scraper floor - Fuel tank 450 litres - Feed roller: length 1,690 mm, diameter 510 mm, fitted with tooth segments - Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips - Standard: "Streusel" flail tip - Centrally positioned lubrication strips - Electric pump for operating cylinder functions (e.g. raising/lowering support foot and opening/closing rear basket, folding/unfolding rear conveyor, disengaging drive) when engine is off - 24 V electric control system - Separate control box at the rear of the machine - Hydraulically folding fine shredding basket (mesh size between 30 - 280 mm, graded on request) incl. tailgate - Scraper floor with 32 slats - Complete remote radio control - Preparation for travel drive - Acoustic start-up warning - Paint finish: RAL2011 deep orange Optional Equipment: - Hydraulic travel drive - Drawbar extension 400 mm - Fuel tank 600 l - Additional hydraulic connection 20 l/min - Flail tip C1 bear paw with tungsten carbide - Fine shredding basket - Impact plate with strike bar - Rear conveyor 4 m - Separate drive for feed roller/scraper floor "Twin Drive" - Reinforcement plates in the loading hopper

Condition: good (used), functionality: fully functional, usable tank capacity: 200 l, input voltage: 400 V, tank capacity: 200 l, total width: 1,100 mm, total length: 1,140 mm, total height: 1,100 mm, Sourdough Machine Fermenter Isernhäger Model: 200 ASE 200 liters simple time control stainless steel construction with castors agitator with pump lid / worktop Ndedpfst D Tq Iox Abgod DGUV V3 tested – only by us Connection: 400V, 16A CEE plug Used machine Delivery service available More bakery machines in stock!

Year of construction: 1980, condition: used, work piece width 250 mm workpiece height 35 mm bore diameter 2 mm Ndedpfx Absxyaghegjd

Year of construction: 2016, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21384 Specifications: Approx. 2016 model Screening area: 5.6 m² 3-deck unit Comes with four screen meshes Ndjdpexx H Rkefx Abgod Stationary Fully functional Video available Description:Circ-Bear screening plant from around 2016.The machine has been in regular operation since installation, with services carried out as scheduled.It’s a 3-deck screen but has mainly been used for two fractions.Includes four screen meshes. Delivery by agreement. Own weight: 111 Model: Fleximat PPM

Condition: new, Year of construction: 2025, CE certificated Concrete Plants 24/7 customer support and aftersales services FREE OF CHARGE ASSEMBLY & TRAINING. EASY TRANSPORTATION & QUICK ASSEMBLY (2 hours) *MINUMUM INVESTEMENT FOR GROUNDWORK GENERAL TECHNICAL SPECIFICATIONS Plant Type : Mobile Concrete Batching Plant - PLANETARY MIXER Plant Capacity : 30 m³/ hour freshly compressed concrete Mixer Capacity : 750/500 lt (0.5m³ Compressed Concrete) Ndjdpfxehzu N Ij Abged Electronical equipment : Siemens Other equipment & accessories : Italian Unlimited users & Remote access

Condition: used, mileage: 351,069 km, power: 375 kW (509.86 HP), gearing type: automatic, fuel type: diesel, color: white, overall weight: 32,000 kg, empty load weight: 17,235 kg, maximum load weight: 14,765 kg, tire size: 315/80R22.5, axle configuration: 8x4, number of seats: 2, first registration: 05/2016, emission class: euro6, brakes: constant throttle, suspension: steel-air, driver cabin: day cab, wheelbase: 4,850 mm, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, hydraulics, onboard computer, parking heater, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, crew cab, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, differential lock, leaf-air suspension, aluminum fuel tank, 2nd axle steered, underride guard, side aluminum side guard, roof hatch, EBS, green environmental badge. Wheelbase: 4850 mm Body: Liebherr 904FL concrete mixer approx. 9 m³ 7.5 t front axle, rear axle crown wheel 233 planetary 13.4 t, electronic braking system with ABS and ASR, ABS switchable, disc brakes on front and rear axle, condensate monitoring for compressed air system, front and rear axle stabilizer, residual heat use, construction site filter, PSM, reversing warning system, comfort central locking, off-road driving program, Mercedes PowerShift 3, pre-equipment for toll collection system, fuel tank capacity: 260 l, daytime running lights, transmission oil cooling, rear engine PTO with 100 mm flange, 650 Nm. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Nsdpfsw S Nkbjx Abgodd

Condition: used, Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Ndedpfsxx Tigsx Abged Available from 06/2026

Year of construction: 1974, condition: used, Serial number: 13511xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21156 Ndodow R Npnjpfx Abgjd We have a 1974 Svedala Arbr sorting plant for sale. The work is working, but it is old. Some wear and tear can be expected. Buy in the condition it is in. Ready for delivery.

Condition: used, Year of construction: 2022, operating hours: 2,380 h, functionality: fully functional, Base package AK 315: Central axle trailer chassis with 2 axles, road approval for 80 km/h Braking system incl. EBS and lighting according to EU directive Tyres: 385/65 R22.5 50 mm EU drawbar eye including slip-on shoe Hydraulically adjustable support leg Splash guard (internal and lateral mudguards) Permissible total weight: 16,000 kg MTU diesel engine 6R 1000, 230 kW at 2,200 rpm, complies with EUROMOT V emissions standard Load-dependent feed control incl. automatic scraper floor reversal Hydraulically folding green waste grid basket with rear tailgate Impact plate with teeth Fuel tank: 300 litres Feed roller: Length 1,420 mm, diameter 510 mm, with mounted tooth segments Double-row flail drum with 16 free-swinging cast steel flail holders, replaceable flail tips, and 28 fixed ripping teeth Standard: “Streusel plus” flail tip Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raise/lower support leg, open/close rear basket, fold/unfold rear conveyor, release travel drive) when engine is off 24-V electrical control Separate control box at the rear of the machine Scraper floor with 29 slats Chain drive feed roller and scraper floor Extended radio remote control with 2 foot switches Acoustic start-up warning Rear conveyor: 6 m, 1,500 mm wide with anti-magnetic center section Reinforcement plates (Hardox) on both sides of the feed hopper for the side walls (loading edge) Travel drive preparation Fire extinguisher Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: Hydraulic travel drive Nodjxx Sdpepfx Abgsdd Extended radio remote control with foot switch “Bear Claw” flail tips Fine-shredding basket Watering system Lighting package: engine compartment and rear conveyor Delivery date by arrangement

Condition: used, Year of construction: 2023, operating hours: 119 h, functionality: fully functional, Basic Package Inventhor Type 6 Load-sensing system 500-liter fuel tank Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally arranged wear strips 24 V electrical control – additional electric pump to operate the following functions when the engine is off: Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional Equipment: 260 kW power train – EV 3-axle drawbar chassis unit Shredding system Size L – 20 teeth Auxiliary hydraulic connections 35–80 l/min Hydrostatic drive Hopper extension 350 mm, watering device both sides 7 m rear conveyor belt Overband magnet – Neodymium Frame for 7 m overband magnet Delivery date to be agreed Ndsdpsxx Sbnefx Abgjd

Condition: used, Year of construction: 2018, operating hours: 6,031 h, functionality: fully functional, Basic Package SM620 Plus: Central axle trailer chassis with 2 axles, 80 km/h EU road approval Braking system including ABS and lighting according to EU directive 50 mm EU towing eye, incl. mounting shoe Hydraulically adjustable support legs at the front on both sides and rear right Splash protection (inner and side mudguards) Tyres 435/50 R19.5 Permissible total weight 19,000 kg Deutz diesel engine TCD 3.6 L4, 85 kW at 1,800 rpm, compliant with emission standard EUROMOT TIER IV Final Hydraulically reversible fan at water and oil cooler Complete engine unit can be swung out Fuel tank 300 litres Feed hopper 5.0 m³ capacity Stone grid preparation Hydraulically folding side conveyor: belt length 5,500 mm, belt width 1,000 mm Hydraulically folding rear conveyor: belt length 5,500 mm, belt width 1,000 mm Hydraulic support cylinder between side and rear conveyor Emergency stop switches at side and rear conveyors Load-dependent material feed from conveyor floor to screening drum Continuously variable screening drum speed from 0 - 20 rpm Continuously variable hopper belt speed from 0 - 0.17 m/s Control box at the rear of the machine with the following functions: emergency stop switch, folding/retracting the rear conveyor, folding/retracting the side conveyor, side conveyor inclination and load control +/-, automatic mode on/off From the operator panel: fold/unfold side conveyor Hydraulically folding cleaning brush with individual brush segments and spring tines Centrally arranged wear strips 24 V electric control Underrun protection rear Side collision guard front (reinforced version) and rear both sides Hydraulic quick coupling between rear conveyor and machine Acoustic start-up warning, door monitoring Doppstadt telematics system Paintwork: RAL2011 deep orange Basic version without screening drum Optional equipment: Flow divider on rear conveyor Ndsdpfx Abexx R Rhogjd Delivery date by arrangement

Condition: used, Year of construction: 2018, operating hours: 6,800 h, functionality: unexamined, Basic package AK560: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC Directive 50 mm EC towing eye incl. guiding shoe Njdpfx Abexx Rvkegjdd Tires 385/65 R22.5 Hydraulically adjustable support leg Splash protection (inner and side-mounted mudguards) Permissible total weight 19,000 kg Mercedes/MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT IV emissions standard Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank 450 liters Feed roller: length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: "Streusel" flail tip Centrally arranged wear strips Electric pump for operating cylinder functions (e.g., raising/lowering support leg and opening/closing rear basket, folding/unfolding rear conveyor, releasing travel drive) when engine is off 24 V electrical control Separate control box at the rear of the machine Hydraulically folding fine shredding basket (mesh size between 30 - 280 mm, gradation on request) incl. rear flap Scraper floor with 32 strips Complete radio remote control Preparation for travel drive Acoustic start-up warning Paint finish: RAL2011 deep orange Additional equipment: Special paint in DB6841 MB-Trac Green Hydraulic travel drive Fuel tank 600 l Fine shredding basket Rear conveyor 4 m, belt width 1800 mm Separate drive for feed roller and scraper floor Reinforcement plates on both sides of the feed hopper sidewalls Impact plate with wear strip and additional tooth row Delivery date by arrangement

Condition: used, Year of construction: 2024, operating hours: 630 h, functionality: fully functional, Basic package AK565 Plus: MTU diesel engine 6R1300, 390 kW at 2,000 rpm, EUROMOT V compliant Central axle trailer chassis with 3 axles, road approval for 80 km/h Braking system incl. EBS and lighting according to EC directive 50 mm EC towing eye incl. slip-on shoe Tires: 435/50 R 19.5 Hydraulically adjustable support leg Splash guards (internal and side fenders) Permissible total weight: 22,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, meets EUROMOT V emission standard Exhaust air directed upwards Load-dependent material feed control incl. automatic reversing of the scraper floor Fuel tank: 600 liters Feed roller: length 1,690 mm, diameter 510 mm, with fitted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable "Dopplock" flail tips Standard: "Streusel plus" flail tip Impact plate with teeth Centrally positioned lubrication strips Electric pump for cylinder functions (e.g. raising/lowering support leg and opening/closing rear hood, folding in/out discharge conveyor, releasing drive) when engine is off 24 V electric control system Separate control box at the rear of the machine Hydraulically folding fine shredding basket "Multimesh" (mesh size between 30 - 280 mm, gradations on request) incl. one-piece rear flap Scraper floor with 32 slats Separate drive for feed roller / scraper floor - "Twin Drive" Rear discharge conveyor with anti-magnetic center piece - belt length 6,000 mm, belt width 1,800 mm, discharge height 4.2 m – height adjustable Underbelt - belt length 1,400 mm, belt width 1,750 mm Extended radio remote control with 2 foot switches Drive system preparation Reinforcement plates for the intake hopper (material: Hardox), both sides for side wall Fire extinguisher Acoustic start-up warning Ndodsxx R Akjpfx Abged Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: Hydraulic drive system Additional hydraulic connection 20 l/min "Bear Paw" flail tips Impact plate with strike bar and tooth row Neodymium magnetic roller incl. chute NEODYM overband magnet for rear discharge conveyor Frame for overband magnet Moistening system LED lighting package: engine compartment and rear discharge conveyor Delivery date by arrangement

Condition: used, Year of construction: 2013, operating hours: 4,000 h, functionality: fully functional, Basic Package AK435: Central axle trailer chassis with 2 axles, road approval for 80 km/h Braking system incl. ABS and lighting according to EC directive 50 mm EC towing eye including plug-in shoe Tyres 385/65 R22.5 Hydraulically adjustable support legs Splash guards (internal and side fenders) Permissible total weight 19,000 kg Mercedes-Benz diesel engine OM460LA, 315 kW at 2,000 rpm, compliant with EUROMOT IIIB emission standard Load-dependent material feed control incl. automatic scraper floor reverse function Fuel tank 450 liters Feed roller: length 1,690 mm, diameter 510 mm, fitted with toothed segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: 'Sprinkle' flail tip Centrally arranged wear rails Electric pump for actuating cylinder functions (e.g., raise/lower support legs and open/close rear basket, fold in/out rear conveyor, release drive) when engine is off 24-V electric control system Separate control panel at rear of the machine Hydraulically folding fine-shredding basket (mesh size between 30 - 280 mm, intermediate sizes on request) incl. tailgate Scraper floor with 32 slats Radio remote control incl. transmitter, receiver, 230 V charger, 12/24 V charging cable, 2 batteries, transmitter mount. The following functions can be operated: Engine: stop, engine speed: +/-, scraper floor: stop/reverse/forward, drive: stop/reverse/forward/release, rear basket: open, rear/bottom conveyor: on/off, support leg: raise/lower Drive preparation Acoustic start-up warning Paint: 2-component paint RAL2011 deep orange Optional Equipment: Hydraulic drive 600 l fuel tank 'Bear Paw' flail tips Fine-shredding basket 4 m rear conveyor, belt width 1800 mm Humidification system Separate drive for feed roller/scraper floor Reinforcement plates on feed hopper Delivery date by arrangement Ndsdjxx Ryijpfx Abged

Condition: used, Year of construction: 2023, operating hours: 2,798 h, functionality: fully functional, Basic Package AK 640 SA: Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting in accordance with EU regulations Tires: 385/65 R22.5 Gross vehicle weight 32,000 kg Hydraulically adjustable support legs Splash guards (inner and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, compliant with EUROMOT V emission standard Auxiliary hydraulic connection 20 l/min Load-dependent feed control incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank: 2 x 450 liters Feed roller: length 1,690 mm, diameter 510 mm, with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: 'Streusel plus' flail tip Impact plate with teeth Centrally arranged wear strips Electric pump for cylinder functions (e.g. lifting/lowering support legs and opening/closing rear basket, folding/unfolding rear conveyor, disengaging drive) when engine is off 24V electrical system Separate switch box at the rear of the machine Hydraulically folding fine shredding basket "Multimesh" (mesh size between 30 - 280 mm, gradations on request), incl. one-piece rear flap Rear discharge conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic center section Lower conveyor: belt length 3,800 mm, belt width 1,400 mm Engine compartment protection plate (material: Hardox) Moistening system for external water connection Scraper floor with 71 slats Wear protection in drum area Reinforcement plates on both sides of the feed hopper (made of wear-resistant steel) Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional Equipment: Hydraulic drive Fine shredding basket Nsdexx Rrropfx Abgsdd Scraper floor chain lubrication Lighting package: engine compartment and rear conveyor LED lighting package (scraper floor and infeed) 'Bear Paw' flail tips Delivery date by arrangement Available from 04/2026

Condition: used, Year of construction: 2023, operating hours: 1,400 h, functionality: fully functional, Basic package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally positioned wear strips 24V electric control – additional electric pump for operation of the following functions with the engine switched off: Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Nodpfxsxx Rlfo Abgedd Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: 260 kW drive train – electric version 400 mm track undercarriage Size L shredding system – 20 teeth Size L limiter Auxiliary hydraulic connections 35 – 80 l/min 7 m rear conveyor Neodymium overbelt magnet Frame for 7 m overbelt magnet Hopper extension 350 mm, water spray unit on both sides Delivery date by arrangement

Condition: used, Year of construction: 2022, operating hours: 3,000 h, functionality: fully functional, Basic package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally positioned wear/slide strips 24-V electric control system – additional electric pump enables the following functions with engine off: raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Service-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan wheel Three-sided load protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Painting: RAL2011 deep orange Optional equipment: Driveline 310 kW – EV 3-axle drawbar chassis unit Shredding system Size L-C3 600/4-30Z Size L limiter Auxiliary hydraulic connections 35 – 80 l/min Hydrostatic drive Nodexx N T Ijpfx Abgsdd Hopper extension 350 mm, left-side watering Rear conveyor 7 m Overband magnet Neodymium Frame for 7 m overband magnet Central lubrication system Custom paint finish in RAL Delivery date to be arranged

Condition: used, Year of construction: 2022, operating hours: 1,150 h, functionality: fully functional, Basic package Inventhor 6: - Load-sensing system - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit Ndodsxx N Dgepfx Abgod - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush - Rear conveyor 7 m - Overband magnet neodymium - Frame for 7 m overband magnet Delivery date by arrangement

Condition: used, Year of construction: 2008, operating hours: 773 h, functionality: unexamined, Equipment: Basic Package AK530: - Three-axle chassis for 80 km/h - Braking system with ABS in accordance with EC Directive - Tires 385/65 R 22.5 - Permissible total weight 25,000 kg - Daimler-Chrysler engine OM 502 LA, 390 kW with Euro Stage III - Electrical system 24V - Radio remote control - Additional hydraulic connection 11 cm³ - Rear discharge conveyor AA 6.15 m, hydraulically foldable, discharge height 4.5 m with anti-magnetic center section - Undercarriage belt AA 1.7 m, scraper floor with 34 slats - Fuel tank 750 liters - Separate drive for infeed roller and scraper floor (twin drive) - Load-dependent material feed control incl. automatic scraper floor reversal - Hydraulically foldable fine-shredding basket - Infeed roller with bolt-on tooth segments - Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips - Flail tips made of hard metal "Streusel" - Centrally arranged lubricating strips - 24 V electric pump to operate cylinder functions when the engine is off - Separate control box for rear operation - Hydraulically adjustable support legs - Paintwork: 2-component paint, RAL 2011 – deep orange Optional Equipment: - Hydraulic drive - NEODYMIUM overband magnet Ndsdpfoxx Ndyex Abged - Mounting bracket for overband magnet - Moistening system