ANGULAR SAWING PLANT

HOLZMA (HOMAG GROUP) HKL 570 / 56 / 22 Profiline

Condition: good (used), Year of construction: 1995, 551 kW Year of construction 1995 incl. concrete garage with silencer and additional oil cooler Engine condition: good (approx. 64,000h) Complete engine overhaul in 2017 at 48,500h Dedjvcm Nfspfx Afnsul Turbocharger overhauled at 60,000h Concrete garage/container: 9x3x4m (LxWxH) Offer is without guarantee of availability

Condition: used, Coating system Hymmen CombiCoater ELX-S 1400 with UV dryer. Dedjlf H Tcspfx Afnoul * Technical data will follow shortly * For self-dismantling and collection.

Condition: new, Year of construction: 2024, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) Dedjhw Ng Ispfx Afneul USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device

Year of construction: 1997, condition: good (used), Build in 1997, 55 KW, 4 bar Dodpfx Aog A Hcuefneul

Condition: used, Crossbeams: 2700x120x50 mm – 63 pieces 2700x120x50 mm – 1 piece 1800x100 mm (ideal for chipboard): 1 piece Frames: 5200x1000x95 mm – 17 pieces 4600x1000x90 mm – 4 pieces 2300x1000x95 mm – 2 pieces If you require racks or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking systems as well as accessories and are happy to support you with your planning. Additional accessories such as: Frame, corner and collision protection, push-through protections, chipboards, wire meshes, rear wall grids, and depth supports are available. Shipping: Please inquire about shipping costs, specifying your postal code, location, and the quantity of items required. Dedpfxeh Izr Us Afnoul Additional services: Planning, rack assembly/disassembly, purchase/sale Changes and errors in technical data, specifications and prices as well as prior sale reserved!

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: The machine was operated in Germany and regularly maintained (last service by Homag in 11/2024) Duedpjwx Aaqjfx Afnel Features and technical data: - Workpiece thickness min.: 12 mm - Workpiece thickness max.: 60 mm - Workpiece min. (L×W): 240 × 55 mm (at 22 mm thickness) / 100 mm (at 60 mm thickness) - Edge thickness min.: 0.3 mm (coil material) / 0.4 mm (strip material) - Edge thickness max.: 3 mm (coil material) / 20 mm (strip material) - Feed speed: steplessly adjustable 18–25 m/min (frequency-controlled) - Gluing system: EVA hot-melt adhesive - Glue application (tank / cartridge / nozzle): Melting unit with granulate hopper - Glue volume / cartridge size: Granulate hopper, melting capacity 18–35 kg/h, level-controlled - Heating time: approx. 8–10 min - Edge magazine (positions): 2 coils (automatic coil change) - Automatic edge change: yes (automatic via PC22, can be switched manually) - Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable - Pressure section: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment - End trimming: HL84 trimming unit, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) - Flush milling: via pre-milling unit, pneumatically adjustable - Radius milling: FK13 profile milling unit, automatic 8-position tool changer (R = 2 mm) - Bevel / profile milling: yes, via FK13, pneumatically adjustable - Scraper: integrated in multi-finishing unit MN21 - Polishing: buffing unit in FA11 finishing unit - Jointing unit: KAL310/A20/S2 jointing milling unit, 2 × 3 kW - Workpiece pre-heating: available - Release agent spray device: top / bottom, type 2929 (F.01) - Extraction nozzles: multiple Ø 100 mm (individual extraction per unit) - Control system: power control PC22 (industrial PC, woodCommander running Win XP embedded) - Operating voltage: 400 V, 50 / 60 Hz - CE / standards: CE-compliant per EU directive 98/37/EC Dimensions / required floor space: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg Please note: The return conveyor shown in the pictures is not included in the scope of delivery! Availability: short-term Location: Lithuania

Condition: new, Year of construction: 2025, CIDAN Machinery manufactures coil handling slit and cut-to-length lines that can be programmed and operated by skilled and non-skilled users alike. Our cut-to-length machines are all-in-one units built to withstand high-level production over the course of time while taking up as little space as possible. CIDAN Machinery provides many of their cutting-edge features as standard – straightening units, sheet guide for in-feeds, guillotine shears with hold down beam and double-edged blades, feeding units, foot pedals for remote feeding, and many more. In order to provide the absolute best technological options from around the globe, CIDAN Machinery has partnered Forstner Machinery, a world-wide leader in slit and cut-to-length machines Since 1960, Forstner has been developing and manufacturing machines for professional coil processing. Our partnership has provided us the opportunity to bring all of their best machines to you! - Sheet metal on coils saves money, reduces waste and frees up storage space. - We have the right solution for all levels of production. - Free up floor space with coil processing and increase your productivity and your profits. Duedpfxjmfrgrs Afnjl - The extensive range of Forstner products can be combined to make an efficient production facility based on your requirements, where parameters such as power, distance, time and access to material are decisive for fast and cost-effective production. - With our solutions you can easily process coils from 500 kilos up to 8 tons. Bigger coils mean fewer changeovers, less waste and a more efficient process. - How many different materials do you need readily accessible? Frequent changeovers? With a coil selector you keep eight different materials ready at the cut-to-length for far quicker changeovers. - With a well equipped cut-to-length in your production facility you will no longer need to cut strips in guillotine shears. - Do you sell sheets or do you want to recoil material in smaller coils? We have the right solution for you! - Rational coil handling cuts your lead times, frees up production space and reduces tied up capital in stocks.

Condition: refurbished (used), FULL LINE of Drilling, max working width mm 3200, with fast automatic handling equipment. Composed of the following machines: A) LOADER (Portal) "RBO" Winner C 3200 with double pick-up and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader. B) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° C) 1st Auotmatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units D) 2nd Automatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units Dsdpfx Afsdfgg Ijneul E) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° G) UNLOADER-STACKER (Portal) "RBO" Winner SC 3200 with double pick-up, with double storage station, with central motorized rollers table. With 2 on-ground motorized rollers ways to out-feed the piles (stacks) of panels from the Unloader

Condition: used, Year of construction: 2014, Power Control PC 22 with WoodWop software - POWERTOUCH Panel height mm 8 - 60 Pvc/Abs mm 3 Feed speed up to mt/min 25 (with rounding 20 mt\min) Working height electronically adjustable by N.C. Motorized rubberized belt with upper pressure Panel support guide and easy introduction for small panels Controlled infeed guide Anti-adhesive group Rectifying group with two KW 3 motors each, 9000 RPM Reel magazine Gluing group for PUR glue with pre-melter and glue tank Edge pressure group on straight profiles with pressure rollers electronically adjustable by N.C. End trimming unit with 2 motors (automatic tilt adjustment?) Overlapping trimming unit with 2 motors Rounding unit with 2 multifunction motors (cornering unit + rounding unit) with NC adjustment Edge scraping unit Glue scraping unit Brushing unit Anti-stick unit TECHNICAL DETAILS TO BE CHECKED Dedpfxsvqbh Ee Afnoul

Year of construction: 2013, condition: ready for operation (used), Connected load: 4kW, weight: 1t. Duodpfx Ajhlp Efefnsl