Used Punching Metal for sale (36,202)

Condition: good (used), functionality: fully functional, Passage width: max. 150 mm Passage height: max. 5.0 mm Dksdpfxjxg Rxus Adueu Other: Suitable for cutting stamping grids Actuation via the press ram, return stroke by springs

Condition: used, Year of construction: 2003, Amada AP3-2610V combined CNC punching and laser cutting machine, also known as Apelio III 2610V Year of manufacture: 2003 2000W laser Location: Near Viersen _____ Our terms and conditions apply. Furthermore, the seller is not liable for typographical or data transmission errors. The information and images were provided to us by the owner and approved for publication. The appearance of the items offered corresponds to their age and the images shown. Dkedpfxswml Ado Aduju The technology and wear of the items offered are consistent with their age. Used machines are sold exclusively to businesses and without warranty.

Year of construction: 2015, condition: good (used), 1 x Loma IQ3 Metal Detector. Dkedpfxexg N S Hs Aduju Type: IQ3+st Working aperture: 350mm wide x 160mm height Total length 2.00 meters Full retail spec Located in Melksham, Wiltshire UKFM1-6792

Condition: good (used), Year of construction: 1972, functionality: fully functional, pressing force: 25 t, space requirement height: 2,800 mm, space requirement length: 1,600 mm, space requirement width: 2,200 mm, Four-column punching press Manufacturer: Hermann Raster KG Type: HR SL4S Working area Distance from ram center or distance between the columns under the guide: 160 mm Smallest / largest distance from clamping table to ram at maximum stroke: 260 / 300 mm Smallest / largest distance from clamping table to ram guide: 110 / 150 mm Clamping table Clamping area: 600 x 320 mm Clamping ram Smallest / largest stroke: 0 / 40 mm Ejector stroke (max. 20 mm) Stroke rate: 200-1000 per minute Straightening range: 70 mm Clamping area: 400 x 250 mm Clamping pin: Hole diameter: 40 mm; Depth 70 mm Safety device Electro-pneumatic clutch and spring-loaded brake Dedpfx Aewcxccsdujku Power Normal pressure 25,000 kp Cutting capacity 625 mm², K=40 kg/mm² Floor area required without soundproofing 1 m x 1 m x 2.45 m Weight without soundproofing 3,600 kg Floor area required with soundproofing 1.60 m x 2.20 m x 2.80 m Drive type Voltage 380-660 V Current type: Three-phase current Total power requirement 6 kW Drive: AEG, AM 132 MX4, power 7.5 kW, 2860 rpm Gearbox: PIV, FK NA HB 22 Control cabinet: AEG, 190300 Central lubrication: Woerner, PA 15.M1 Flat/V-belt 3, 17 x 2220, rubber material Drive: Variable speed drive Pull width: 65 mm Pull diameter: 224 mm Special features Gripper feed Z2 Useful width: 180 mm Soundproof cabinet sta Schalltechnische Anlagen GmbH The machine is connected to the power supply and can be tested.

Year of construction: 1996, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model TNC 426 Controller Brand Heidenhain Model TNC 426 P Main Drive Spindle speed range 0 – 2500 Tool taper ISO 50 Number of axis 5 Movement Djdpfx Aoxfculodusku X-Axis Movement 3500 mm Y-Axis Movement 2000 mm Z-Axis Movement 1250 mm W-Axis Movement 800 mm Workpiece Workpiece weight 12000 kg This 5-axis TOS WHN 13.8 boring machine was manufactured in 1996. It features a working spindle diameter of 130 mm, X-axis travel of 3500 mm, Y-axis travel of 2000 mm, and a Z-axis travel of 1250 mm. The rotary table clamping surface measures 2200 x 1800 mm, supporting a maximum workpiece weight of 12,000 kg. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 machine we have for sale. Contact us for more information. Application Types Other Machine Tools

Condition: used, Machine is in fully working condition. Dodpfx Aohm S Dgodusku

Condition: ready for operation (used), Year of construction: 1976, Pressing force: 20 t Table size: 340 x 320 mm (W x D) Ram size: 160 x 230 mm with wedge plate Table opening: 70 x 180 mm Stroke rate: max. 150 strokes/min, infinitely adjustable via PIV gearbox Stroke: 10...50 mm Ram adjustment: 50 mm Equipped with: • Swiveling extension plate for feed • Motorized central oil lubrication • Slide guide with V-prisms Dedpfxexg Rvao Adueku • Machine body made of cast iron • PIV gearbox for stroke rate control • Free-standing control panel • 3 cams for feed, etc. • Manual setup via hand lever • Forward and reverse operation • No documentation or electrical diagrams available Optionally, we can offer a pneumatic feed for the press.

Condition: good (used), Year of construction: 1998, In good technical condition. Cutting length: 3,000 mm, max. capacity: 6 mm. Year of manufacture: 1998, weight: 5,500 kg, including new double-sided blades. Dksdpfxjxd Tcdo Aduou

Year of construction: 2001, condition: ready for operation (used), Punching force: 300kN, max. operating pressure: 300bar, weight: 13500kg, operating hours: approx. 52300h. Documentation available. An on-site inspection is possible. Dksdjxgucqopfx Adusu

Condition: good (used), functionality: fully functional, RADIAL drill MAS Dkodoxgtgbopfx Aduou

Condition: good (used), Year of construction: 1987, number of straightening rollers: 13, working width: 2,000 mm, sheet thickness (max.): 10 mm, overall weight: 32,000 kg, straightening roller diameter: 145 mm, max. sheet width / max. sheet width: 2000 mm max. sheet thickness / max. sheet thickness( St 50): 10 mm min. sheethickness Blechdicke / min. sheet thickness: 3 mm Anzahl der Richtwalzen / number of straightening rollers: 13 Walzen / rollers Richtwalzendurchmesser / diameter of straihgtening rollers: 145 mm Richtgeschwindigkeit / speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Mittenabstand der Richtwalzen / distance b/n rollers centers: 150 mm Stützwaldermesser / diameter of bottom rollers: 290 mm Anzahl der Stützwalzen / number of bottom rollers 21/24 Anzahl der Abstützungen( oben/unten): 3 /3 Hubgeschwindigkeit der Traverse / speed of adjustm. of traverse: 0,71 mm / sec Dkjdpexgrnwefx Adusu Hubweg der Traverse / way of traverse: -18 mm to +42 mm max. Schwenkung der unteren Traverse / max. swivel of lower traverse: 8 mm Hauptantriebsmotor / power of main motor: 30 kW Gewicht der Maschine / weight of the machine: 32 t

Condition: used, Workshop overhauled Hydraulic guillotine shear LVD type HST 3100 / 13 Machine No. 19176 Year of manufacture 10 / 1991 Cutting length 3100 mm Cutting thickness 13 mm Backgauge 950 mm Working height 990 mm Hydraulic sheet hold-downs 17 units Hydraulic tank capacity approx. 160 litres Motor power 18.5 kW Electrical connection 400 Volt, 50 Hz, 21 kW - Motorized backgauge with ELGO positioning control - Cutting gap adjustment in 8 steps via lever adjustment with locking pin - Cutting angle adjustment from 0.5° to 3° - Cutting length adjustment via potentiometer - Left angle stop 2200 mm Dedpfx Adowavmmoueku - Electric foot switch Required space without front table extension L x W x H 4200 x 2300 x 2150 mm Required space with front table extension L x W x H 4200 x 3900 x 2150 mm Weight 9 t Good condition

Condition: excellent (used), Year of construction: 2007, Pressing force: 2,000 kN Table size: 2,300 x 1,100 mm (W x D) Pass-through opening: 2 pcs. 700 x 300 mm Distance between uprights: 2,460 mm Ram clamping area: 2,300 x 1,100 mm Lateral clearance: 740 mm Die height: 550 mm (ram down, adjustment up) Stroke rate: 30 - 140 strokes/min, steplessly adjustable Stroke: 20...220 mm Ram adjustment: 150 mm (motorized) Main drive: 30 kW Weight: approx. 27,500 kg Features: • Siemens + Beckhoff control • 8-fold slide guide • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromechanical stroke adjustment • Siemens + Beckhoff control system • Beckhoff panel visualization • T-slots in table and ram (28 mm, spacing 300 mm) • Vibration-damping machine feet • 4 pcs. tool safeties + 4 pcs. cam outputs • Ram with 20 mm wide central slot • Hydraulic tool clamping on table and ram • Hydraulic roll blocks for tool change Coil line by Kemmerich, consisting of: Decoiler Type: V 5000 A – SH – 600 - S Load capacity: 5,000 kg Coil width: 100 - 600 mm Expansion range: 470 – 520 mm Coil outside diameter: 2,000 mm • Motorized auxiliary drive • Pneumatic disc brake • Hydraulic expansion by wedge segments • Rear support disc and 3 attachable limiting arms at front Dodpfx Adjv T Anlsusku • Hydraulically actuated and driven hold-down roller, laterally adjustable by handwheel • Load carriage (stationary, decoiler moves hydraulically), lifting height 770 mm with 4 limiting bars Straightening machine Type: RMBMZ 50.600 UF Coil width: 40 - 600 mm Coil thickness: 0.5 – 4.0 mm Max. cross-section: 1,200 mm² Number of rollers: 9 pcs. Roller diameter: 50 mm Number of feed rollers: 2 pcs. Feed roller diameter: 100 mm Speed: 3 - 25 m/min Features: • Rollers hardened, ground and hard chromed • Drive of lower straightening rollers and feed rollers via gear transmission • Motorized roller frame adjustment, precision 1/100 mm, settings storable • Upper rollers ventable by 100 mm • Feed roller pneumatically ventable • Lateral strip guidance at entry with handwheel and leadscrew • Outlet roller basket and loop bridge • Loop control via ultrasonic sensor • Hydraulic introduction aid, consisting of table with extendable tongue and upper bending roller Roll feed Coil width: max. 600 mm Features: • Rollers hardened, ground, and chromed • Driven by gear motor • Upper roller hydraulically ventable • Height adjustment hydraulic • Lateral strip guidance at entry with handwheel • Roller basket Additional features: • Pneumatically swiveling loop bridge between straightener and feeder • Safety fence around the entire line • Decoiler and straightener on common base frame • Various spare rollers for straightener The complete line can still be inspected under power at the current owner's site!

Condition: excellent (used), total height: 1,800 mm, overall weight: 640 kg, cutting height (max.): 220 mm, table width: 600 mm, table length: 600 mm, input voltage: 400 V, throat depth: 500 mm, Offered is a vertical metal band saw from the manufacturer Thiel (similar to the Mössner Rekord). Type: Segura 117 Dodpov Ni Hgjfx Aduoku This saw is in very good condition. The scope of delivery includes various saw blades for various materials (see pictures). All technical specifications can be found in the pictures. The saw table can be pivoted in two directions. Maximum material thickness: 220mm The saw is equipped with an Ideal saw blade welding device, which allows the various saw blades, which are supplied on a roll, to be welded together to the correct length and even deburred with the small integrated grinding stone. Shipping terms: EXW We can assist with loading. A suitable forklift is available. As is usual with used machines, any warranty (liability for material defects) is excluded. All information is provided to the best of our knowledge and belief. We reserve the right to make errors.

Condition: new, tube diameter 1/4" max. 2" Zoll wall strength max. 3,0 mm engine 400Volt / 1,5KW weight 90 kg dimensions 07 x 0,4 x 0,3 m Pipe notcher Maximum wall thickness 3.0 mm Suitable for the following pipes: Dodpfev Skzkox Adujku 1/4", 1/2", 3/4", 1", 1 1/4", 1 1/2", 2"

Condition: used, The press is extremely stable thanks to its heavy steel construction, which is fully welded. The working surface of the press can be easily raised and lowered to any position by means of a hydraulic actuator. Additional tools are available and your own tools can be adapted. Specification: Djdpfx Asugtv Ijdusku Tonnage: 250 T Year: 1991 If you have any further questions, we will be happy to answer them.

Condition: good (used), Year of construction: 1976, number of straightening rollers: 11, working width: 2,500 mm, sheet thickness (max.): 16 mm, overall weight: 46,000 kg, straightening roller diameter: 180 mm, max. sheet width / max. sheet width: 2500 mm max. sheet thickness / max. sheet thickness (St 50): 16 mm min. sheet thickness Blechdicke / min. sheet thickness: 6 mm Anzahl der Richtwalzen /number of straightening rollers: 11 Walzen / rollers Richtwalzendurchmesser/diameter ofstraightening rollers: 180 mm Richtgeschwindigkeit / speed of straightening: 10 - 16 - 20 m / min Throughput speed: 10 m/min Dkedsxgrf Njpfx Aduju Hauptantriebsmotor / power of main motor: 75 kW Gewicht der Maschine / weight of the machine: 46 t

Condition: ready for operation (used), Punching machine, hole punch, blanking press, eccentric press, Used machine Manufacturer: Haulick + Roos Werkzeugmaschinen GmbH, Pforzheim, Germany Type: RVD 32-540 HS Serial number: 1201847 Year of manufacture: 1985 Pressing force: 320 kN (≈ 32 tons) Stroke rate (speed range): 30 – 1200 strokes/min Drive (motor power): ~18 kW Stroke length: 0 – 40 mm Ram adjustment: 0 – 50 mm Centre hole in ram: Ø 52 mm Dsdpfoxdxbxjx Adueku This is a high-speed eccentric press (HS = High Speed), suitable for pressing thin sheet metal in mass production, for example in the electronics or automotive industries for small components.

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: P-II-43/1380, The machine is operational, loading is included in the price, you are welcome. Dkjdpexgngcsfx Aduou

Condition: used, Year of construction: 2004, pressure 80 t throat 515 mm connected load 11,0 kW stroke 70 mm 640 x 550 mm no. of strokes 38 Hub/min hole diameter in sheet thickness mm weight of the machine ca. 1,95 t dimensions of the machine ca. 1,6 x 1,55 x 1,9 m Dkodpfx Adevki Duouou ith a wide range of accessories See pictures

Condition: good (used), Year of construction: 1990, number of straightening rollers: 19, working width: 750 mm, sheet thickness (max.): 12 mm, Year of manufacture / YOM: 1990/ 2023 Overhauled / Overhauled: 2023 Sheet width / Sheet width: Max. 750 mm Sheet thickness / Sheet thickness: approx. 0.5-12 mm Part length in direction of passage / Part length in direction of passage: min. approx. 100mm Dkodpfoxgqpmsx Aduou Feed rate / Feed rate: 2-20 m/min Number of straightening rolls / Number of straightening rolls: 19 pcs Diameter / diameter: 50mm Workpiece infeed height / Workpiece infeed height: 900mm Power requirement / Power requirement: 31kW

Condition: new, material width 1015 mm material thickness 1 mm speed von Hand Djdpjupxdkofx Adujku weight 240 Kg dimensions 1420 x 600 x 750 m

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, working width: 2,000 mm, sheet thickness (max.): 10 mm, overall weight: 32,000 kg, straightening roller diameter: 145 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Dkedpfxexgqmfe Adusu Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: good (used), Year of construction: 1994, number of straightening rollers: 23, working width: 630 mm, sheet thickness (max.): 6 mm, overall weight: 43,000 kg, straightening roller diameter: 30 mm, max. sheet width: 630 mm Dkjdpfx Ajxgql Isduju max. sheet thickness: 6 mm min. sheet thickness: 0.3 mm number of straightening rollers: 23 rollers diameter of straightening rollers: 30 mm straightening speed: 10 m/min min. workpiece length: 50 mm max. vertical roller distance: 20 mm reading the machine settings: 0.01 mm main drive motor: 6 kW

Condition: good (used), Year of construction: 1969, number of straightening rollers: 7, working width: 2,500 mm, sheet thickness (max.): 39 mm, straightening roller diameter: 290 mm, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm Dodpfjxgqlbjx Adujku min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW