Used Punching Device for sale (13,992)

Condition: good (used), Punching units, punching unit, punching jaw, punching tool, non-driven latching and shearing units, forming jaw -Ironing material: Aluminum -Punch dimensions: see photo with dimensions -Quantity: 2 pieces -Price: per piece Lrodpfx Ajhf Dzded Nog -Dimensions: 240/145/H210 mm -Weight: 22.5 kg/pc.

Condition: used, Hotrunner controlunit PSG 12 12 units 230 Volt price: 2.850 € contact: Mr. Rainer Eckerle Lrsdpjwgb Trsfx Ad Neg

Year of construction: 2002, condition: used, heat exchanging device, 4 bar, year: 2002, price: 1.500 €, contact: Herr Rainer Eckerle Ljdpfx Adj Saauo Nerg

Condition: used, Year of construction: 2001, cooling device YORK YCSA 08 M+T, aircooled, 8 kW cooling power (7°C / 30°C), year: 2001 - 0 hours, price: 2.950 €, contact: Herr Rainer Eckerle Lodpjwkqxofx Ad Nerg

Condition: used, length 1000 mm width 800 mm height 630 mm weight 460 kg T-slot - width 50 mm Clamping table, clamping plate, T-slot table Dimensions Table length: 1000 mm Table width: 800 mm Table height: 630 mm T-slot length: 50 mm Weight: 460 kg Lrodpfx Aegrngdod Neg

Condition: used, depth 850 mm height 2200 mm length 1100 mm weight 2125 kg flute distance 400 mm 1x clamping angle Dimension Length: 1100 mm Height: 2200mm Lrjdpfx Aepy R Rzod Njg Depth: 850mm Weight: 2125kg T-slots: 28x50mm

Year of construction: 1987, condition: used, centre height 390 mm passage of steadyrest 220 mm Lodpfxehgw Uxs Ad Nsrg chucking diameter 400 mm total power requirement / kW

Condition: used, Year of construction: 2006, functionality: fully functional, 2 compressed air dryers from Farrag are available for sale; further technical information available on request. Original price approx. €6,500. Model 1: SCARD 100 Model 2: SCARD 70 Year of manufacture: 2005 Power: 3.1 kW Lredpfevkdkijx Ad Nsg

Condition: used, Plasma cutting unit, plasma cutting machine MESSER GRIESHEIM Type Plasmastar HA 95 Serial No. 4040323 Year of manufacture: 1990 Power: 95 Amp. - 60% duty cycle 45 Amp. - 70% duty cycle Adjustment range: 2 steps Cutting capacity: 25 mm (clean cut) Severance cut up to 45 mm Hand torch: PHC 95/140 Power supply: 380 Volt, 50 Hz, 32 Amp. plug - Water-cooled - New hand torch BINZEL ABICOR, Type Abiplas Cut 200 W - 6 meter hose package length - Operating manual Space requirements (L x W x H): 900 x 480 x 850 mm Weight: 160 kg Lodjyah R Nepfx Ad Norg Very good condition

Condition: used, Year of construction: 2003, infeed unit for double grooving machine equipped with: multiple feed belts, high-speed reference rollers, infeed unit for double tenoning grooving machine Lrjdpfxjycxnwe Ad Nsg

Condition: used, Year of construction: 2002, Used, in excellent condition Make: Schuko Model: Vacomat 12/14 Year of manufacture: 2002 Machine no.: 13137 Clean air / negative pressure unit GS dust-tested CE type-tested Motor: 2.2 kW Connection diameter: 140 mm Pressure: 2,800 Pa Lodpfx Aoycxhqjd Njrg Air capacity: 1,350 m³/h Collection bins: 1 pc Filter cleaning: manual-mechanical Filter pressure indicator Required space approx. 1,500 x 900 x 2,200 mm Weight approx. 230 kg Storage location: 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in as-inspected condition, without warranty or guarantee.

Condition: used, Automatic lathe, turning machine with copy attachment UMA Type F1 NK 60 Copy lathe for chuck parts Machine no. 28-0031 Year of manufacture: 1971 Maximum turning diameter: 150 mm Swing diameter over bed: 400 mm Turning length: approx. 200 mm Spindle bore in machine spindle: approx. 42 mm Spindle speeds: 580 / 930 / 1480 / 2380 rpm, 4 steps Main motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm Ledpfx Aoib D H Red Nsrg - Spindle speed via 4 gearbox steps - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying unit SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system mounted below the machine bed - Hydraulic unit positioned behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement automatic lathe with hydraulic unit (L x W x H): 2900 x 1900 x 1700 mm Space requirement automatic lathe (L x W x H): 2400 x 1900 x 1500 mm Space requirement hydraulic unit (L x W x H): 1400 x 850 x 1700 mm Weight automatic lathe: 2400 kg Weight hydraulic unit: 400 kg Total weight with pallet: 3000 kg In good condition

Year of construction: 2018, condition: good (used), Mould turner 10Ton Year : 2018 Lrodpjw Dtp Hjfx Ad Nsg

Condition: used, Year of construction: 2001, from government authority used, top condition, low hours Manufacturer: AL-KO Lredpoyclxvofx Ad Nog Model: Mobil Jet 100 Year of manufacture: 2001 Machine no.: 2433306444 Clean air unit / negative pressure GS dust-tested CE type-tested Motor: 1.5 kW Connection diameter: 100 mm Pressure: 1572 Pa Air output: 770 m³/h 1 collection drum 50 cm Manual filter cleaning Filter pressure monitor New price approx. 3,600.00 EUR Space required approx. 1200 x 1700 x 2000 mm Weight approx. 120 kg Location: 97447 Gerolzhofen, loaded free, unpacked Delivery in current as-inspected condition, without guarantee or warranty

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 150 152, total height: 6,615 mm, ram adjustment: 200 mm, installation height: 800 mm, table height: 1,000 mm, total width: 3,210 mm, total length: 5,140 mm, table length: 3,000 mm, table width: 1,400 mm, pressing force: 400 t, control cabinet height: 2,200 mm, control cabinet length: 3,600 mm, control cabinet width: 600 mm, type of input current: three-phase, clearance between the columns: 1,100 mm, distance between side stands: 1,100 mm, distance between stands: 3,020 mm, overall weight: 100,000 kg, year of last overhaul: 2025, ATTENTION: The machine will be completely overhauled mechanically and electrically before delivery in 2025/2026. Press force: 4000 kN Adjustable stroke: 50 - 300 mm Lrjdpfjw H Ag Tex Ad Njg Ram adjustment: 200 mm Strokes per minute: 15 - 60 Die installation height: 800 mm Table dimensions: 3000 x 1400 mm Ram dimensions: 3000 x 1200 mm New SIEMENS S7 1500 series control system

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 150 583, total height: 3,975 mm, ram adjustment: 125 mm, installation height: 410 mm, table height: 1,220 mm, total width: 2,725 mm, total length: 3,510 mm, table length: 1,500 mm, table width: 1,200 mm, pressing force: 200 t, control cabinet height: 2,200 mm, control cabinet length: 340 mm, control cabinet width: 600 mm, type of input current: three-phase, clearance between the columns: 900 mm, distance between side stands: 900 mm, distance between stands: 1,520 mm, overall weight: 3,700 kg, year of last overhaul: 2025, ATTENTION: The machine suffered transport damage and will be completely overhauled mechanically and electrically before delivery in 2025/2026. Pressing force: 2000 kN Ljdsw H Arvopfx Ad Nsrg Adjustable stroke: 20 - 160 mm Ram adjustment: 125 mm Strokes per minute: 30 - 180 Die installation height: 410 mm Table dimensions: 1500 x 1200 mm (Press will be delivered with a brand new table plate, T-slot design of your choice) Ram dimensions: 1500 x 1000 mm Control: SIEMENS S7 1500 series, Year of manufacture: 2020

Condition: reconditioned (used), > completely overhauled and newly painted > Passage width 900mm Lsdpfjfuaztex Ad Njrg > roller table

Condition: new, Year of construction: 2025, neu 2025 090185 prompt, Zwischenverkauf v Polen 7950 € 153.44 € 1 47 to 110 mm 27 mm 25x18 mm 8 s 16 mm 700 bar 479 mm Lrjdpfjwirmbex Ad Nog 135 mm 388 mm 117 kg MOBILE HYDRAULICS-POWERSTATION Double action - fully automated process of punching and return Wide range of hole diameters up to 27mm Intelligent control system with inching and automatic load detection Mode indicator light Protection against accidental start-up OPTIONAL: Gantry punching station for increased productivity and operation comfort € 710,-

Condition: ready for operation (used), T&S ConturoMatic T2 Contour Measuring Device Optical-incremental measuring system Measuring speed 0.1...3.0 mm/s Positioning speed up to 25 mm/s Ljdpewak Nvsfx Ad Njrg Measuring point spacing 0.5...25 µm Accuracy ±(0.9+L(mm)/100) µm Radius accuracy ±0.005% of the nominal value at R 12.5 mm Distance accuracy ±(1.2+L(mm)/100) µm Angle accuracy ≤ 30'' Technical data has been adopted. You are welcome to visit us for a viewing. We would be happy to arrange a cost-effective shipping service for you. You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description purposes. Deviations from technical specifications and errors in the description of the item may occur and are reserved.

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons Lrjdox U Eiaepfx Ad Nsg

Condition: excellent (used), functionality: fully functional, Height 475 mm Width 200 mm Operating pressure 6/7 bar Lrodpfx Asx U Efned Neg Operating temperature 0/40° C Weight 20 kg

Condition: used, Dust suction hood x mm Lredpfxjx U A N Do Ad Njg Motor output x kW Air consumption 2000 m³/h +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2006, condition: used, weight max. in kg 1000 kg weight 1020 kg condition sehr gut Ljdpsx U A H Aofx Ad Norg

Condition: used, Year of construction: 1980, control panel Boschert Stanze Year 1990 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Ledsx U A H Nopfx Ad Nerg

Condition: used, Year of construction: 1990, length 3300 mm Lrsdpfxswm Rp As Ad Njg width 1800 mm height 1800 mm weight of the machine ca. 3,2 t