Used Prokuwa Plastic Gmbh for sale (71,669)

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 3200 0088, overall weight: 2,000 kg, total length: 7,300 mm, total width: 1,100 mm, total height: 2,000 mm, input voltage: 400 V, input current: 125 A, type of input current: three-phase, input frequency: 50 Hz, cooling capacity: 30 kW (40.79 HP), operating speed: 83 mm/s, Manufacturer IBT.InfraBioTech GmbH Art.-No. 3200 0088 Technical Data Condition: As new; little used from test series Functionality: Fully functional Year of manufacture: 2018 Connected load: 58 kW Cooling capacity, water connection on-site: 30 kW Conveyor belt length: 7,000 mm Conveyor belt width: 310 mm Infeed height: 55 mm Infeed width: 308 mm TECHNICAL DETAILS Application: Conveyor oven for curing in film bonding technology Component temperature: max. 100°C Stainless steel housing (LxWxH): 7,300 x 1,100 x 1,680 mm Overall height without control cabinet: 2,000 mm Control cabinet (WxDxH): 1,200 x 600 x 2,100 mm Base frame made of stainless steel profile tube, height adjustable: ± 30 mm Conveying system Vacuum conveyor belt made of silicone, belt 310 mm wide Transport speed: max. 5 m/min Conveyor belt height: 950 mm ± 30 mm Belt infeed/outfeed openings (WxH): 308 x 35 mm Free area infeed: approx. 750 mm Free area outfeed: approx. 750 mm Pgjdpfx Aewnm Ukehvsi Conveyor belt operation: Continuous operation, adjustable up to max. 5 m/min, tracking regulation with light barrier safety system at infeed and outfeed. Loading and unloading are performed manually. Intended use The curing oven is a belt system for continuous operation with a feed speed of max. 5 m/min. Open areas at the infeed and outfeed sections are provided for loading and unloading components. The enclosed heating section houses 6 IR modules (height adjustable). The maximum component temperature is 100°C and serves to heat solvent-free adhesive between composite film layers. The return side of the belt, the rear sides of the IR modules, and the space above the heating modules are water-cooled. Components are held onto the conveyor belt by vacuum. The control cabinet is located separately from the machine outside the cleanroom. The system operates in a cleanroom according to EN ISO 14644 Class 8 and is loaded and unloaded by the operator. The equipment is exclusively for the warming of film composites. Features - 6 adjustable infrared heating modules, each with 6 infrared emitters - 6 pyrometers for precise temperature control - PU conveyor belt for efficient material flow - Integrated control and regulation system - Height-adjustable stainless steel base frame - Vacuum conveyor belt - Cooling water distribution in the base frame (G1") - Water cooling for the belt return section and rear sides of IR modules - Mechanically lockable service doors - Operator panel mounted at the infeed on the left side - Control cabinet cooling unit, water connection on-site History This oven was intended for use in a cleanroom environment and was only used briefly for a test series. The oven was used for curing solvent-free adhesives between composite film layers.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, input voltage: 220 V, Equipment: documentation/manual, Microscopic 3D inspection scanner with measurement envelope of 1.6 x 1.2 x 0.8mm, height resolution 0.1 µm. The unit can take linear measurement in 3 dimensions and also measure edge radius between approximately 5µm and 100µm. It is complete with laptop loaded with the necessary software, dongle, and microscope stand. It has only been lightly used. Pgsdpox Ekuiefx Ahvei

Condition: used, Rotary Feeder,Rotary Valve, Ventilatorenfabrik Oelde GmbH, used machine Manufacturer: Ventilatorenfabrik Oelde GmbH Type: MS 050-390 A Pgodpfjytr H Uox Ahvsi Capacity / Speed: 58 liters; rotor equipped with 12 fixed rotor blades (cells) – 15 rpm Electrical data: 400 V; 50 Hz; 4.5 kW

Condition: used, Year of construction: 2010, Technical details: x-travel: 800 mm y-travel: 685 mm z-travel: 630 mm c-axis: 360° (Planscheibe-Tisch) control: Siemens 840D Power Line spindle speed:: 10.500 - 20.000 U/min max. torque on the spindle: 180 Nm tool taper: HSK -A63 DIN 69893 tool changer with: 40 places no. of tables: 2 table swivelabel +/-: je 120 (a-Achse) ° table surface area: 280 x 275 mm table load capacity: 320 kg interface: RS232 spindle hours: 38.700 h Total power requirement: 37 kW dimension machine xH: 4,0 x 4,4 x 3,0 m dimensions LxWxH: Späneförderer: 2,1 x 1,05 x 1,5 m dimensions L x W x H: Kühlschmieranlage: 1,3 x 1.6 x 1,95 m Pedpfjytcf Uox Ahvsgi 5 - axis machining center CNC machining center Clamping table for 4th and 5th axis (swivel 120° right/left/speed 50 rpm and turn with faceplate Ø 280mm/200 rpm) max. workpiece size 940 x 650mm for/on table with chip conveyor make Knoll, 750 K-1/150; year of manufacture 2009 Bürener coolant system with paper belt filter belt width 700mm; year of manufacture 2009 for both control cabinets with cooler Rittal Accessories exclusive i.D. *

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036941, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 600,000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The precisionMolding base injection moulding machine is the perfect entry-level solution for all-electric injection moulding, enabling you to respond to market demands quickly and innovatively. It combines high performance, intuitive operation, and short delivery times. It can be used in a wide range of applications, such as in the packaging industry, electrical and electronics sector, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad spectrum of applications – High energy efficiency due to the all-electric machine design – Achieve tight delivery deadlines with a base machine setup and a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.: 61036936, new, year 2023) CONTROL SYSTEM • MC P1 with 15” TFT colour display with multi-touch functionality CLAMPING UNIT • Clamping force kN 800 • Maximum mould opening force kN 120 • Daylight (h x v) mm 470 x 420 • Mounting platen (h x v) mm 610 x 560 • Min. – max. mould installation height mm 150 – 400 • Maximum opening width mm 750 • Maximum opening stroke mm 350 • Ejector drive electric • Ejector stroke mm 100 • Ejector force forward / return kN 22 / 22 • Ejector speed forward / return mm/s 300 / 300 • Max. mould weight kg 600 INJECTION UNIT • Screw diameter / type mm 35 / standard • Effective L/D ratio 20.0 • Injection pressure bar 1837 • Stroke volume cm³ 135 • Shot weight at max stroke for PS g 123 • Injection speed mm/s 200 Psdpfx Ajyvid Rjhvjgi • Injection flow rate cm³/s 192 • Screw drive / speed 1/min 382 • Plasticising rate (standard screw) g/s 19.5 • Nozzle contact force kN 30 ELECTRICAL PARAMETERS • Connected load kW 17.8 • Installed heating capacity kW 8.9 • Power supply V / Hz 400 / 50, 3-phase with neutral conductor WEIGHT AND DIMENSIONS • Net weight with control cabinet t 5.9 • Length x Width x Height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT • Low-wear plasticising system • BluePower full insulation for plasticising cylinder • Open nozzle • Air valve 1-fold (BWAP) • Pneumatic control for hot runner shut-off 1-fold • Cascade electrical interface 4-fold • Electrical preinstallation for hydraulic auxiliary unit • Euromap interface for handling E18, E63 • Euromap interface (central computer) E67, E77 • Water battery 4-fold • Automatic central lubrication • Adaptive Process Control (APC) • Injection-compression moulding function • Graphic analysis package • Swivelling device for injection unit The machine is located at our works in Parsdorf and is available at short notice. Further additional options can be offered upon request. We look forward to your enquiry.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 5064, Please let us know your asking price. Sale only within Europe, incl. Turkey Robot is not scope of supply - Robot not scope of supply Technical data see hand out Pedpfx Ahju Rdm Uovogi Without packaging; any warranty rights are excluded. Should you wish to dismantle the system yourself, please inform us accordingly in your bid For the correctness of the technical data, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 5041, Please let us know your asking price. Pedpfou Izvhex Ahvjgi Sale only within Europe, incl. Turkey Robot is not scope of supply - Robot not scope of supply Technical data see hand out Without packaging; any warranty rights are excluded. Should you wish to dismantle the system yourself, please inform us accordingly in your bid For the correctness of the technical data, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Manufacturer Fasti GmbH Model ERD 65 B Connected load 0.9 kW Pgodjvzwrbepfx Ahvei

Condition: excellent (used), functionality: fully functional, Slow-speed shredder Cutting width – 150 mm Motor power – 2.2 kW Rotor speed – 200 rpm Number of rotor knives – 9 pcs Number of stator knives – 2 pcs Pedpfx Ahjyf I N Asvsgi 9 units available, in perfect condition Capacity up to 25 kg/h Price: 1000 EUR per unit

Condition: ready for operation (used), Year of construction: 2001, functionality: limited functionality, For sale is a Fischercope H100C XYp micro-/nano-hardness testing system by Helmut Fischer (year of manufacture: 2001). The device was last used in a laboratory, but is currently not fully functional and is therefore expressly sold as defective / for repair or as a source of spare parts. Known issues: - Table advance movement does not function correctly (the table is positioned under the measuring head, not under the microscope – precise measurement is currently not possible). Likely an electronic issue. - The measuring table moves independently to the left – possibly a joystick failure. - Indenter change does not work correctly (the probe does not move fully to the end stop). Therefore, the device is particularly suitable for: • Repair by individuals with electronics expertise • Sourcing of spare parts Psdpfx Ahoyu Nabevsgi • Research / hobbyists The optical condition is good for its age.

Condition: new, functionality: fully functional, power: 18.4 kW (25.02 HP), fuel type: diesel, color: orange, operation weight: 2,500 kg, maximum load weight: 1,000 kg, tire condition: 100 %, number of seats: 1, shovel volume: 0.5 m³, Year of construction: 2025, Equipment: 4 in one shovel, all wheel drive, cabin, pallet forks, ONLY AVAILABLE FOR A LIMITED TIME – INQUIRE NOW! Are you looking for a compact, powerful loader that’s ready for work without unnecessary costs? Here’s your solution! WHY CHOOSE THIS MACHINE? ✔ 1,000 kg lift capacity – real power for construction sites & operations ✔ Telescopic boom (up to 3.6 m) – greater reach than standard wheel loaders ✔ Complete set included – ready to work, no need for additional purchases ✔ Extremely maneuverable – perfect for confined spaces ✔ Robust & simple – no complex, failure-prone technology ✔ Reversing camera – increased safety ✔ Cabin heating – comfortable operation ✔ Bucket position indicator – precise work ✔ Hydraulic steering – easy to operate ✔ Heavy-duty drive axle – durable & dependable Get in, get started, start earning! ⚡ MAXIMUM EFFICIENCY ✔ Fast loading cycles ✔ Precise hydraulics ✔ Powerful pushing force ✔ Reliable EURO V diesel engine ➡️ More work in less time = higher profits for you! ⚙️ TECHNICAL DATA Operating weight: 2,500 kg Payload: 1,000 kg Dimensions: 4,600 × 1,600 × 2,500 mm Bucket volume: 0.5 m³ Speed: up to 25 km/h Engine: Changchai, Diesel, EURO V, approx. 25 kW Hydraulic pressure: 16 MPa Lifting data: Lifting height (telescopic arm): 3,600 mm Lifting height (main boom): 3,000 mm Dump height: up to 2,650 mm ️ EVERYTHING INCLUDED – NO ADDITIONAL COSTS! ✔ Quick coupler ✔ Standard bucket ✔ 4-in-1 bucket ✔ Pallet forks Others charge extra – here, it’s all included in the price! TRY BEFORE YOU BUY! Visit us and see for yourself! ✔ Test the machine on site ✔ Make a direct comparison ✔ Immediately available ➡️ Those who test, buy! PRICE ONLY €14,500 net – SPECIAL OFFER! Psdpfx Asyizavohvegi ⚠️ Limited quantity! Contact us now – before it’s gone!

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 9,000 mm, height adjustment type: electric, grinding belt speed: 25 mm/s, total height: 2,200 mm, total length: 4,640 mm, total width: 2,650 mm, overall weight: 1,200 kg, grinding length: 2,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 4,640 mm, space requirement width: 2,650 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sander M2S92-150 with two sanding belts for manual sanding, matting, and polishing. For processing steel, stainless steel, and brass. Not for aluminum or titanium! Psdpjv S Sr Refx Ahvegi Scope of delivery includes: - Machine stand with connecting elements - Belt drive - Pneumatic belt tensioning and manual belt guide - Sanding unit with contact roller, manually movable from belt 1 to belt 2 - Electric table lift - Flat machine table - Workpiece stop on the machine table - Original equipment sanding belts - CE-certified version - Operating instructions + manufacturer's declaration according to Appendix 2 The sturdy machine with its welded steel construction runs very smoothly. The two machine stands are equipped with a crank so that even longer parts can be sanded on the machine. The sanding belt is guided by three belt guide rollers, providing the largest possible working area for the operator and thus ensuring optimal work, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. Each belt has a separately adjustable, pneumatic belt tensioner. This allows for optimal belt tension adjustment for each belt. The dust collection system is designed to effectively capture the resulting sanding dust and direct it to the extraction nozzle when connected to an appropriate extraction system. To ensure effortless operation, the sanding unit is mounted on play-free roller guides. The machine table can be easily and quickly adjusted to the required workpiece height using the electric table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended far enough that workpieces do not have to be pushed under the sanding belt when placed on the table. The electrical controls for the main functions are conveniently located in the center of the machine. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housing in "light gray" The machine is supplied in its basic configuration with two initial equipment belts (W x L) 150 x 9000 mm and a contact roller approximately 50° shore for a belt width of 150 mm. Additional accessories: 3-axis table with integrated handling device for rotating and swiveling the workpieces. The handling device is mounted in the center of the table under the insert frame. To work with the handling device, the insert frame is removed from the machine table. The handling device is equipped with four vacuum suction cups for holding the workpieces and consists of: The bearing with the rotary axis, to which a brake disc is mounted on the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional locking disc is mounted on the swivel head, allowing for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically via a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with an inserted frame = 80 daN. Workpiece weight when using the handling device relative to the clamping plate = 25 daN or 120 Nm relative to the center of the rotary axis.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,000 mm, height adjustment type: electric, total height: 2,200 mm, total length: 3,550 mm, total width: 2,000 mm, overall weight: 870 kg, grinding length: 1,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 3,550 mm, space requirement width: 2,000 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sanding machine MS92-150 3-cornered sanding belt 150x7100 for manual sanding, matting and polishing. For processing steel, stainless steel and brass. The scope of delivery includes - Machine stand with connecting elements Pgedpotwb U Aofx Ahvoi - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking regulation - Sanding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Original equipment sanding belt - Operating instructions + manufacturer's declaration - CE version The stable machine frame in welded steel construction results in very smooth machine operation. The two machine stands are equipped with an offset so that longer parts than the machine table can be sanded. The sanding belt guide via 3 belt deflection rollers results in the largest possible open working area for the operator and therefore good working conditions, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. The belt has adjustable pneumatic belt tension. The dust collection device is dimensioned so that the sanding dust is collected and directed to the extraction nozzle when connected to an appropriate extraction system. The sanding unit is mounted on backlash-free roller guides to ensure effortless operation. The machine table can be easily and quickly adjusted to the correct workpiece height using the electromotive table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be pushed under the sanding belt when loading. The electrical controls for the main functions are arranged in the middle of the machine for ease of use. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Switch cabinets and small housing in " light gray " The machine is supplied as standard with an original equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling the workpieces. The handling device is mounted in the center of the table under the insertion frame. To work with the handling device, the insertion frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing with the rotary axis, on which a brake disk is mounted at the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5° and 90°. An additional locking disk is attached to the swivel head, which is used for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically using a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with the insert frame in place = 80 daN Workpiece weight when using the handling device in relation to the clamping plate = 25 daN or 120 Nm in relation to the center of the rotary axis.

Year of construction: 2024, condition: like new (used), functionality: fully functional, System Overview Complete modular chamber furnace system for batch homogenising of aluminium extrusion billets, electrically heated with jet-heating, waste-heat recovery, and full automation. CE-certified (Machinery Directive 2006/42/EG). Pgedpeyuvq Tefx Ahvsi Scope of supply: 1× Preheating furnace (BSN 1607) — electric, jet-heating 2× Holding furnaces (BSN 1608, 1609) — electric, forced air circulation 2× Heat-exchanger furnaces (BSN 1610, 1611) — unheated, forced air circulation 1× Charging machine (BSN 1612) — electric/hydraulic 12× Charging racks (BSN 1614) Control cabinet with Siemens S7-1515F 2PN (Profinet) PLC and operator panel Pusher thermocouples for direct billet temperature measurement Key technical advantages: Jet-heating for fast, uniform billet heating (typically 3–4× faster than conventional convection furnaces) Integrated heat-exchanger furnaces for efficient waste-heat recovery — reduced energy consumption and operating costs Overtemperature operation possible — shorter cycle times with direct billet temperature monitoring Suitable for homogenisation and/or solution heat treatment / ageing Modular design — suitable for new installations and retrofits of existing lines Ideal for: Aluminium extrusion plants and casthouses seeking to optimise energy consumption, CO₂ footprint, and throughput. Further technical details available upon request (PDF with full specifications).

Condition: good (used), Year of construction: 2004, functionality: fully functional, Manufacturer: HABERMEHL Anlagenbau GmbH Address: Hauptstr.1, 35510 Butzbach-Ebersgöns, Germany Type: EH 400/1 Serial number: 901 Year of manufacture: 2004 Voltage / Frequency: 400 V / 50 Hz Rated power: 3 kW CE-certified: Yes 🛠️ Device Description Industrial shredder or crusher (Shredder/Granulator). Notable features visible in the photos: - System with rotating knives (shredding unit) on a 2 mm shaft - 3 kW SEW motor and reduction gearbox Psdpfsw Niuhex Ahvsgi - 8 mm screen (the screen is labeled “8 mm Sieb”) – determines the output particle size - Rollable, portable design - Material discharge container and lower motor drive system Machines of this type are typically used for shredding the following materials: - Plastics - Rubber - Wood - Light metal chips - Electronic scrap 📝 Technical information you should request If you require further details, you may request the following information from the supplier or manufacturer:

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-062, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system). 2 cutting bridge with 2 cutting heads including Z-axis 1 head 2D cut 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 Pgedowrn Iyjpfx Ahvei (Product photo as an example) The machine is CE-certified.

Condition: new, functionality: fully functional, Our state-of-the-art automatic tube filling machine is a versatile all-rounder, specifically designed to optimally support companies with the highest quality requirements. Thanks to its superior build quality and wide application range, it offers intuitive operation to efficiently and reliably optimise your tube filling processes. Powerful drives and a user-friendly colour touchscreen control system enable maximum flexibility for format and product changes, greatly simplifying your tube filling operations. The machine features memory slots for rapid and reproducible setting of all relevant machine parameters. If you are looking to optimise your tube filling processes with strong production performance while maintaining high quality, Impuls Packaging is your ideal partner. System Overview Parameters: Power supply: AC 220V / 50Hz or 110V / 60Hz Power: 4 kW Filling range ● 2–5 ml ● 5–30 ml Pgsdpfx Ajyq Hgkehvei ● 10–140 ml ● 30–300 ml (customisable) Tube diameter: 10–50 mm (customisable) Tube length: 30–250 mm (customisable) Hopper volume: 50 L Filling accuracy: ±1 % Capacity: 40–60 tubes/minute Machine dimensions: 2050 × 900 × 1900 mm Net weight: 850 kg

Condition: used, Year of construction: 2008, overall weight: 320 kg, total length: 2,200 mm, total width: 800 mm, total height: 1,360 mm, Steel frame assembly for vacuum pump system Oerlikon Leybold RUTA 2001 502260 (SCREWLINE SP630 + RUVAC WAU 2001). Pgedpfxjyufqce Ahvji 2 levels including mounting holes for securing the pumps and to the floor Material: steel Colour: grey Weight: 320kg Length: 220cm Width: 80cm Height: 136cm - without vacuum pumps (as shown) - with small control cabinet (as shown, without internals) - with cable duct (as shown) 4 units available Price excluding shipping (EXW) Shipping available upon request

Condition: good (used), Year of construction: 2005, functionality: fully functional, pressing force: 4 t, filling opening width: 730 mm, filling opening length: 400 mm, bale length: 700 mm, bale width: 350 mm, bale height: 500 mm, bale weight: 40 kg, total width: 988 mm, total height: 2,033 mm, total length: 752 mm, type of input current: AC, input voltage: 230 V, overall weight: 380 kg, noise level: 60 dB, power: 1.5 kW (2.04 HP), input frequency: 50 Hz, Fully functional and tested vertical baler for packing small quantities of cardboard or plastic. More information or photos by email or phone. Pgedpevy Drxjfx Ahvei

Condition: new, Year of construction: 2025, overall weight: 9,700 kg, gear ratio: 42.642, Main gearbox FLENDER, H3SH size 19 i = 42.642 Output shaft diameter: 290 mm Drive shaft diameter: 110 mm Pgsdpfoyuddnjx Ahvji Cooling by: CLP mineral oil VG 460 P2 = 420 kW n1 = 1,231 rpm n2 = 28.9 rpm T2 = 138,942 Nm Including: - Oil supply system OWGD - Piping - Main drive clutch RUPEX RWN 360 - Output clutch RUPEX RWN 1250 - Auxiliary gearbox B3 SH 04 - Auxiliary engine INNOMOTICS 1CV3182B 180 - Brake TE 200/220/50 - Drive coupling FLUDEX FADB 297x200 - Output clutch N-EUPEX A315 - Base frame for auxiliary drive

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: DMG3 size 22, overall weight: 31,100 kg, gear ratio: 6.943, Main gearbox FLENDER, DMG3 size 22 i = 6.943 PM = 4,000 kW n1 = 993 rpm n2 = 143 rpm Number of ring gear teeth = 292 Mill speed = 15.1 rpm Operating factor to ISO 6336 = 2.3 Shaft d1 (left): Ø 170 n6 x 250 mm long G1 = 790 mm with 2 keys according to DIN 6885-1 Shaft d1 (right): Ø 170 n6 x 250 mm long G1 = 790 mm with 2 keys according to DIN 6885-1 Sealing for both d1 shafts with labyrinth seal Cooling and pressure lubrication with external oil cooler OWTS 10 (not included) Shaft d1 left – fitted with part 2 of UZWN 460 coupling Shaft d1 right – fitted with part 2 of RWN 800 coupling No oil supplied Including: Podpfxeyuct Uo Ahvegi - Lubrication system OWTS 10 - Pipework - Main input coupling RUPEX RWN 800 - Set of liners with alignment tools - Set of foundation bolts - Auxiliary gearbox FLENDER H3 SH size 11 - Auxiliary motor tbd225M - Auxiliary input coupling FLUDEX FAR 395x224 - Auxiliary output coupling UZWN kompakt 460 - V-belt pulley - V-belts - Centrifugal brake FB 2x208 - Brake drum TE - Holding brake TE 315/800/60 - Base frame - Pretensioning tool

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, WE Flexmaster 400 laser welding machine Year of manufacture: 2010 Laser unit TruDisk 3302, Trumpf company Cooling unit P805-17640, Termotek company Material: black sheet metal and stainless steel sheet Sheet thickness: 0.6 - 2.0 mm Pipe diameter: 80 - 600 mm Pjdev Ipcfjpfx Ahvogi Pipe length: 100 - 1250 mm

Year of construction: 2015, condition: excellent (used), functionality: fully functional, machine/vehicle number: ODW 2687/20, CONTINUOUS PRESS FOR SANDWICH PANELS The installation is part of a larger production line; please refer to our other listings for additional components. The plant is fully enclosed and equipped with a walk-on operating platform above the press. WORKPIECE DIMENSIONS (as previously manufactured): Length: 2,000 mm – 8,500 mm Width: 1,500 mm – 2,500 mm Thickness: 12 mm – 60 mm Maximum batch weight: 60 kg (potentially increasable, subject to confirmation with the manufacturer) TECHNICAL DATA: Total pressing force: 4,250 kN Specific pressure: 10 – 20 N/cm² Number of hydraulic cylinders: 16 Hydraulic cylinder diameter: 110 mm Pedpjyt Rhkefx Ahvegi Individual cylinder control: Yes Hydraulic operating pressure: 20 – 280 bar Multi-deck opening: 150 mm Maximum operating temperature: 80°C Approx. press weight: 57,000 kg Required air pressure: 6 – 10 bar Required extraction volume at air velocity v = 30 m/s: 3,400 m³/h Heat output: 2 x 110,000 kcal/h Heating medium: Hot water Customer-side supply temperature: 85 – 95°C Separate heating for top and bottom heating plates Cooling unit for reheating plates during product changeover INSTALLATION DIMENSIONS: Width: 5,066 mm Length: 9,604 mm Height approx.: 5,013 mm

Year of construction: 2015, condition: good (used), functionality: fully functional, machine/vehicle number: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, GANTRY SYSTEMS, AND AUTOMATED METAL INSERT PLACEMENT UNIT This system is part of a larger production line; please refer to our other listings for more information. The offered system includes 3 provision stations for facing sheets, an automated adhesive application machine for sandwich panel bonding, a lay-up conveyor for manual assembly of the inlay/ribbing, gantry systems for manipulating the facing sheets, and an automated placement unit for metal inserts/reinforcement points. COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm MATERIALS (from previous production): GRP, sheet metal, plywood, wood/PU strips, PVC, Styrofoam GLUING GANTRY FOR CONTOUR & SURFACE BONDING (of the facing sheets & inlays): Number of needle valves surface: 104 Pgedpfxjyt Nm Sj Ahvji Number of needle valves contour: 1 Adhesive system: 1K-PUR Number of nozzles in water spray unit: 8 AUXILIARY UNITS: Climate chamber (storage for 1K-PUR adhesive) Vacuum pump for gantry systems Punching unit

Condition: new, Year of construction: 2025, Horizontal Cartoner 60-ECO – Compact and Efficient Limited space is a common challenge in production environments. Our BASIS 60-ECO horizontal cartoner offers a compact and reliable solution. The machine was presented as an exhibition machine at a trade fair and is now available for sale. The total length including conveyor is only about 4 meters, making it ideal for facilities with limited space. The machine can process up to 60 cartons per minute. - Flexible product infeed adaptable to different products Pgsdemftm Nepfx Ahvoi - Optional automatic product timing system - Carton size up to 220 mm (L) × 120 mm (W) × 400 mm (H) - Siemens PLC control and Siemens servo drives - Nordson hot-melt gluing system Customers are welcome to visit our facility in Germany to test the machine with their own products and set up the system according to their needs. The price is negotiable. We also offer a wide range of horizontal and vertical cartoners as well as flow-wrapping machines.