Used Profiling Lathe for sale (10,893)

Condition: used, L + Z Lathe WAFUM Type TUD 40 Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Spindle bore Ø 56 mm Bodpfx Aow Uf Hwjcyoww Spindle speed 18 - 1800 rpm 36 steps Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg good condition

Condition: good (used), Year of construction: 2004, functionality: fully functional, Fanuc control, 42mm spindle bore, two turrets, sub-spindle, bar feeder, chip conveyor Bedpfx Acoxgqrzjyeww

Condition: used, turning length 4000 mm turning diameter over bed 1000 mm turning diameter over cross slideways 900 mm Bjdoxukvpepfx Acyeww centre height 1090 mm control SIEMENS 810D max. workpiece weight 1500 kg Rotating speeds 1000 U/min bed width 355 mm max. workpiece weight 3000 kg dia. of quill 180 mm spindle passage 155 mm engine output 40 kW weight of the machine ca. 3,15 t required space 3,51 x 1,80 x 2,02 m GURUTZPE A-1200 G4 CNC lathe with milling and grinding equipment

Condition: used, Year of construction: 2006, bar material dia. 20 mm spindle passage 22 mm turning length 205 mm Control Siemens Yaskawa Bwsdpfx Acoxukr Dsysw turning speeds 500-10.000 U/min c-axis 0,001 ° gripping station 20 mm turning length 30 mm positive location each 0,001 ° Number of tools 10 fest / fix St. total power requirement 2,2/3,7 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,6 x 1,2 x 1,8 +FMB m CNC sliding head lathe Star Ecas 20, built in 2006, with FMB minmag 18 loading magazine, in good condition, from the medical technology sector. Two machines of the same type and year of manufacture are available.

Condition: used, Year of construction: 2000, turning diameter 0420 mm turning length 635 mm control 21i-T Fanuc turret head 12 pos. swing over bed 570 mm spindle turning speed - stepless 25 - 5000 rpm spindle bore 79 mm feed - longitudinal/cross mm/min rapid travel - longitudinal/face 24/20 m/min main drive motor 28/21 (40/100%) kW total power requirement 44 KVA weight of the machine ca. 5,7 t dimensions of the machine ca. 5,5 x 3 x 1,8 m Bjdexukqtopfx Acysww Control: Fanuc 21i-T. Machine is with tailstock. Machine has dust exhaust and chip conveyor.

Condition: excellent (used), Year of construction: 2006, Tornos CNC Swiss Type Sliding Head Auto Model: Deco 26A Control: Fanuc PNC Deco Year: 2006 Bar Diameter: 20mm Turning Length: 200mm Spindle Speeds: 10,000 RPM ‘C’ Axis Bwjdpfx Acexukfweyjw Driven Tools

Condition: used, Precision Lathe BOLEY Type 4 LE Conventional High-Precision Universal Multi-Function Machine Tool Serial No. 42562 Centre Distance 500 mm Swing over bed 240 mm Centre height over bed 120 mm Swing over cross slide 140 mm Centre height over cross slide 70 mm Spindle bore 23 mm Chuck mounting M40 x 3.5 mm external thread Tailstock taper MK 2 Quill stroke / travel 80 mm Spindle speed 30 - 1300 rpm Drive power 1.1 kW Power supply 400 V, 50 Hz - 3-axis digital readout RSF ELECTRONIC, Type Z503ST-220 - Position display HEIDENHAIN, Type VRZ 136B for rotary encoder - LCD display unit for measuring equipment on accessories - Spindle speed adjustable via 2 V-belt stages, 2 gear stages, and infinitely variable via variator belt drive - Longitudinal feed via change gears + set of change gears - Several 3-jaw and 4-jaw chucks Ø 100, 125, and 140 mm with chuck jaws - MULTIFIX quick-change tool post size A with 8 exchangeable tool holders - Vertical slide with clamp - Several clamps and vices - Clamping plates + fixture tables - Indexing table as dividing attachment - Dividing head with collets and tailstock Bwedpfx Acew Dvv Asyjw - Heavy dividing attachment with clamping plate and handwheel drive - WOHLHAUPTER spindle tools and milling cutters + collets - Rapid-traverse spindle with pneumatic drive - Milling slide with collet chuck - External cylindrical grinding attachment - Live centre - Steady rest - VOGEL central oil lubrication - Built-in mini compressor (3.5 bar) in machine base - Compressed air maintenance unit for tooling - Operating manual - Machine mounted on steel plate (steel plate 1200 x 540 x 20 mm) Required space (L x W x H) 1650 x 950 x 1750 mm Weight lathe 660 kg (with steel plate) Weight of accessories 325 kg Very good condition

Condition: excellent (used), Year of construction: 1995, - machine in stock - after a technical review - very good condition Bwodpfxed Rkkzo Acyew - year of production 1995   TECHNICAL PARAMETERS: - turning length max 1300 mm - turning diameter 120 mm - three lower knives - five top knives - steady - hydraulic knife control - automatic control - magazine   Machine dimensions: - length 380 cm - width 210 cm - height 215 cm - weight ~ 3490 kg

Condition: excellent (used), CATALOG NUMBER 7753 TECHNICAL SPECIFICATIONS - max diameter of machined dowels: 130mm - installed bushing: 110mm - max diameter of input material: 160mm - min length of input material: 800mm - max machining allowance per side: 15mm - cutter head drive motor: 15kW - 3 feed speed options + forward/reverse - feed motor: 1.1kW Configuration: Bwodpfx Ajxhddgjcyjw - 3 toothed feed rollers - 3-knife cutter head - 3 smooth discharge feed rollers - dimensions (L/W/H): 3100x1400x1500mm - weight: 2100kg ADVANTAGES – made in Poland – 3-knife cutter head – used rounding machine, very good condition Net price: PLN 36,900 Net price: EUR 8,780 based on an exchange rate of 4.2 PLN/EUR (Prices may vary with significant fluctuations)

Condition: good (used), Year of construction: 2011, 450mm swing, 210mm max diameter, Bodpsxuhwqsfx Acysww FANUC 0i Control, 51mm bar capacity, 12 station turret, 11/7.5kW Spindle Motor, 4,500 rpm, collet chuck, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: used, Year of construction: 2008, turning diameter 0410 mm turning length 500 mm control Plus iT Heidenhain turret head 12 pos. VDI 30 swing over bed 520 mm spindle turning speed - stepless 25 - 5000 rpm spindle bore 87 mm feed - longitudinal/cross mm/min rapid travel - longitudinal/face 24/20 m/min dimensions 5000 x 1800 x 1800 mm total power requirement 44 KVA Bedpfxexukqme Acysww weight of the machine ca. 5,0 t Machine is with C- axe and life tooling! Control: Heidenhain Plus iT. Machine has chip conveyor, chuck and tailstock.

Condition: good (used), Year of construction: 2007, Tornos Swiss Type Sliding Head Auto Model: Deco Sigma 20 Control: Fanuc Series 31i Model A Bwjdpfx Acoxukc Njyow Year: 2007 Max Diameter: 25.4mm Turning Length: 230mm Number Of Axis: 6 RPM: 10,000 Spindle Power: 5.5KW Barfeed: 3000mm 532 6970

Condition: used, L + Z Lathe ZMM - SLIVEN (Bulmak - Bulgaria) Type CU 325 Machine No.: 8169 Year of manufacture: 2002 Centre distance: 1000 mm Swing over bed: 320 mm Centre height over bed: 160 mm Swing over cross slide: 190 mm Centre height over cross slide: 95 mm Spindle bore: 32 mm Spindle speeds (forward): 85 - 2000 rpm, 12 steps Spindle speeds (reverse): 130 - 1300 rpm, 6 steps Feeds: longitudinal and cross Chuck flange: short taper DIN 55027 size 5 Tailstock quill taper: MT 3 Drive power: 2.2 kW Power supply: 400 Volt, 50 Hz - 3-axis digital readout RSF, type Z 730 - Spindle speed adjustable in machining direction via 12 gearbox steps Bedpfxsvt U Tmo Acyeww - Spindle speed adjustable in counter direction via 6 gearbox steps - 3-jaw chuck BISON Ø 160 mm with 1 set of stepped jaws - 4-way universal tool post - Coolant tank with pump integrated in machine base - Spindle brake operated via direction lever - Emergency stop via foot pedal and emergency switch - Foldable chuck guard - Machine lamp - Splash guard - Travelling steady rest - Quick-change drill chuck with MT 3 taper - Multiple change gears - Operating manual with electrical diagram Installation dimensions (L x W x H): 2100 x 800 x 1600 mm Weight: 750 kg Good condition

Year of construction: 2008, condition: refurbished (used), Oscillating base: 800mm Oscillating cross slide: 800mm Maximum distance between large spindle noses: 1,130mm Maximum machining diameter: 320mm Bsdexuguuopfx Acysww Maximum turning length: 810mm Bar machining capacity: 52mm X1, X2 axis: 210mm Y1 axis: 110mm (+65, -45) Y2 axis: 110mm (+45, -65) Z1, Z2 Axis: 810mm B-axis (spindle 2): 920mm CNC control: MSX-701 III Spindle 1, 2 Max. spindle speed 1, 2: 6,000 1/min Spindle nose 1, 2: JIS A2-5 Bore diameter through spindle 1, 2: 61mm Turret type: 16 stations x 2 Max. tool spindle speed motorised: 6,000 1/min Speed x1, x2: 30,000 Speed y1: 20,000 Speed z1, z2: 50,000

Condition: excellent (used), Year of construction: 2020, SIEMENS 840D SL control unit MAIN SPINDLE Speed 5.000 1/min Spindle bore 65 mm COUNTER SPINDLE Speed 7,000 1/min Spindle bore 42 mm Bedsvi Nizepfx Acysww 2 REVOVER Travel X1, X2 180mm Travel Y1 ±45mm Travel Z1= 704mm, Z2= 620mm 12 stations per revover all driven Chip conveyor Bar loading magazine TOP X-FILES XFS/7.3

Condition: excellent (used), Year of construction: 2017, 533mm max. machining diameter, 584mm cutting length, 3,200rpm spindle speed, 102mm bar capacity, Bedpfx Acexugtkeyjww 12 station turret, 4,000rpm milling speed, Y axis -/+ 51mm, 40Hp spindle motor, HAAS control, 254mm, 3 jaw chuck, tool setter, swarf conveyor, coolant, Tailstock, Magazine barfeed .

Condition: used, Year of construction: 1980, faceplate diameter 2000 mm turning diameter over plate 2200 mm travel -x axis 1700 mm travel -z axis 400 (+550) mm faceplate turning speed range -stepless- 0,28- 160 U/min centre height over plate 1140 mm diameter of main spindle 285 mm Bodpfjxuknrsx Acysww spindle bore 100 mm Control S 840 D max. workpiece weight 5000 kg max. torque on the faceplate 25000 Nm total power requirement 75 kW weight of the machine ca. 21 t dimensions of the machine ca. 6 x 3,5 x 3 m Machine was reconditioned and modernized in 2015 with Siemens 840 D CNC control. Originaly it was built in 1980.

Condition: good (used), Year of construction: 2001, Model: SL-235B/500 Control: MSG 500 Year: 2001 Turning Diameter: 390mm Turning Length: 470mm X Travel: 235mm Y Travel: 520mm Spindle Speeds: 3500 RPM Bwsdpfoxukciex Acysw With: 210mm Power Chuck Swarf Conveyor Tailstock

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light Bwodsrtd Uwspfx Acysw - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Condition: good (used), Mounting bracket adapter, cross table, for mounting three-jaw chucks, three-jaw lathe chucks -Manufacturer: Scheelen, clamping bracket for lathe -Photo: Short cone 6 -Groove: 70 x 13 mm -Dimensions: see photos -Dimensions: 300/185/H180 mm -Weight: 26.3 kg Bodpfx Ajxugl Hecysww

Condition: refurbished (used), Year of construction: 2022, turning diameter over bed: 540 mm turning diameter over slide rest: 280 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis Bwodpexugdijfx Acyjw fixed steady rest feed safety chip tray several tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: good (used), Year of construction: 2004, ELBERON Multipurpose Lathe Type: GRC300X750 Chuck 130 mm Bwedpfxswah Rqs Acyew In good condition. See data sheets for details.

Condition: used, Year of construction: 2003, Technical details: turning diameter: 630 mm turning length: 2000 mm swing diameter over bed slide: 350 mm Bwsdpfovb Dt Sjx Acyjw upper slide-adjustment: 195 mm bed width: 550 mm spindle diameter in front bearing: 120 mm spindle drive: 17/25 kW spindle bore: 71 mm spindle turning speed range: 3 - 1800 U/min tailstock-quill taper dia./stroke: 110/210 mm total power requirement: 30 kW dimensions of the machine ca.: 4,9 x 2,1 x 2,0 m weight of the machine ca.: 5 t Machine with Monforts System Euro Turn control - quick tool change device MULTIFIX - 3-jaw chuck - coolant device - chip conveyor *

Condition: good (used), Year of construction: 2004, Dugard Eagle NC Lathe Model: NL 200 Control: Fanuc 18i – TB Year: 2004 Turning Diameter: 280mm Turning Length: 508mm Diameter Over Bed: 470mm Spindle Bore: 52mm Spindle Speeds: 4500 RPM Spindle Motor: 15KW With: Bjdpfx Acexuiwlsysww 200mm Power Chuck Bar Feed V-65 LE Swarf Conveyor Machine: 3800 x 1700 x 1600mm high (Approx) Weight: 3200 Kgs (Approx)

Condition: repair required (used), Year of construction: 1988, Lathe KNUTH SH150/610 R, year 1988 Chuck diameter 160 mm, center length 610 mm. Bwjdpfxewr A Tqs Acyjw Machine in need of repair.