Used Profile Sanding for sale (6,891)

Condition: good (used), Year of construction: 1997, We are offering this well-maintained Johannsen T94 edge belt sander, manufactured in 1997. Manufacturer: Johannsen Langbandschleifer Model: T94 Year of manufacture: 1997 If you have any questions or need further information, please feel free to send us a message or give us a call. Dcsdpfx Acjygvqqs Njc

Condition: excellent (used), Edge Sander De Stefani MVT Djdoydkbfspfx Ac Nscc 2 sanding units Maximum workpiece height: 80mm Self-adjusting sanding unit Manual adjustment of sanding unit Manual angle adjustment of unit Oscillating sanding units Feed speed controlled by variator Feed motor power: 0.74 kW

Condition: ready for operation (used), For sale here is an optical profile grinding machine by Fritz Werner, type SP. The machine is in very good condition and can be tested on site. Technical data: - Axial relief: 0 to +35 - Lateral relief: ±15 - Grinding carriage stroke, fine adjustment: 36 to 72 per min - Maximum grinding wheel diameter: 175 mm - Grinding spindle speed: 1925 to 3850 per min Dcodpswv Havofx Ac Njc - Maximum workpiece height: 125 mm - Workpiece length: 250 mm - Variable speed motor for grinding spindle: 1400 to 2800 per min Should you have any further questions, please feel free to contact me.

Condition: ready for operation (used), The machine is in very good condition and can be tested on site. Technical Data – Grinding Machine Dsdpfxjwvgido Ac Nocc Machining area (mm) Height x Length x Depth: 80 x 110 x 55 Motor power (kW): 0.5 Speed (min-1): 5000 Feed rate (hod/min): 150 Table load (kg): 20 Control: BOSCH Accuracy: 0.005 mm, reading via CNC, template grinding 1:10, 1:20, or 1:50, suitable for rough grinding. If you have further questions, I am at your disposal.

Condition: used, Year of construction: 2001, Abrasive belt length 1st unit: 2,150 mm Max. working width: 1,300 mm Number of belts: 3 Belt 1st unit: cross belt Design 1st unit: cross belt Sanding pad 1st unit: electronic segmented pad Abrasive belt width 1st unit: 150 x 4,800 mm Drive 1st unit: kW 2nd unit: longitudinal roller Dcsdpsxzi S Nefx Ac Noc Design 2nd unit: steel calibration roller Abrasive belt length 2nd unit: 2,150 mm Abrasive belt width 2nd unit: 1,350 mm Abrasive belt speed 2nd unit: 18 m/sec 3rd unit: pad unit Design 3rd roller: electronic segmented pressure beam SDS system Sanding pad 3rd unit: electronic segmented, 32 mm width Abrasive belt length 3rd unit: 2,150 mm Abrasive belt width 3rd unit: 1,350 mm Suitable for lacquer sanding: yes Belt air blast: yes Vacuum conveyor: yes Feed speed, fixed: stepless 5 – 15 m/min Control: screen control Electrical/pneumatic belt oscillation: electrical Infeed height: variable (lower table moves) Table height adjustment: electric motor Table height display: digital Working height / feed table height: 880 mm Location: Supplier

Year of construction: 1986, condition: excellent (used), I sell Profile Grinding Machine Reckmann LM 161. Grinder in very good condition, little used. Dcjdpfx Ajuyg Rnjc Nec

Condition: excellent (used), Profile grinder Weinig model Rondamat 929 Dodpfx Aoydd Ncec Nscc

Condition: used, Year of construction: 2007, Support table: one-sided Support table length: 620 mm Support table depth: 220 mm Grinding height: 150 mm Grinding unit: tiltable Return roller: one Diameter Pneumatic belt oscillation: Yes Belt speed 1: 20 m/sec Sanding belt length: 2250 mm Sanding belt width: 150 mm Design: stationary Extraction: Central connection Weight approx.: 95 kg Motor power: 2.25 kW Extraction diameter: 120 mm Storage location: Dcsdpfxjygm Dbo Ac Noc

Condition: used, This Nikon Profile Projector V-12 – precision measuring device – is being offered in our industrial auction / machinery auction due to the closure of Hofer Getriebetechnik – including workshop equipment, lifts, tools, machines, forklifts, office furniture, and metal cabinets, auctioned online. Dcedpfoydamwox Ac Noc This item and many more can be found on our platform.

Condition: used, Year of construction: 2006, Working width: approx. 1,000 mm Spindle diameter: 40 mm Feed: Pneumatic Dcjdpfex Ivk Usx Ac Noc Cross-profile milling machine Comec type FRO1000 for precise machining of cross profiles and contour milling on solid wood and wood-based materials. The robust construction and stable milling unit ensure consistently accurate profiles for both series and single-item production.

Condition: excellent (used), functionality: fully functional, Comec LC/15AV Orbital Grinder Minimum/maximum workpiece diameter: 10–100 mm Main motor power: 5.5 kW Feed motor power: 2×0.25 kW Djdpfxeyc Rvmj Ac Nocc 3 feed speeds Sanding belt dimensions: 1220×70 mm

Condition: used, Year of construction: 2013, CNC profile processing center by Stegherr, model GLS-2, year of manufacture approx. 2013, Beckhoff control system type CP3919, serial no. 143/0613-1. Free sale. Please send us your offer. Dcsdpjx Natcofx Ac Njc

Condition: used, Year of construction: 2009, functionality: fully functional, aluminium spacer cutting saw Dcodpfx Acsx Dxrko Noc

Condition: good (used), Year of construction: 2005, Servoalert in Y-axis and Z-axis CNC control Tekna SLW 8 tool places pneumatic clamping device Technische Daten / technical details: X-Weg / X-travel 4000 mm Y-Weg / Y-travel 270 mm Z-Weg / Z-travel 270 mm Spindelaufnahme / spindle taper SK30 Dsdpfx Acjklzzlj Necc Drehzahlbereich Spindel / spindle speed 18000 Upm /rpm Antriebsleistung / drive capacity 7 kW Gewicht der Maschine ca. / weight 1100 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1997, functionality: fully functional, working width: 1,350 mm, working height: 900 mm, Well-maintained cross-sanding wide belt sander Ernst 520-2 HC Duplex from first ownership: – Working width approx. 1,350 mm – Electromechanical workpiece thickness adjustment – Long belt cross-sanding unit with sliding pressure beam and lamella belt, link spacing 40 mm, sensing roller spacing 20 mm, drive motor approx. 15 kW – Wide belt longitudinal sanding unit with duplex cushion pressure beam, link spacing 40 mm, sensing roller spacing 20 mm, drive motor approx. 26/31 kW – Special circuit for calibrating and leveling – Brush roller unit for surface cleaning – Blow-out devices – Automatic conveyor belt control – Vacuum suction system for small parts – Workpiece thickness approx. 3–120 mm Dedsygdiuspfx Ac Njcc – Working height approx. 880 mm – Control panel on the left side – Machine color RAL 9002 grey white – Base color RAL 3000 flame red – Year of manufacture: 1997, first owner, well-maintained condition – Sale from location Karlsruhe / Southern Germany – Machine is still connected and fully operational – Inspection and test run possible by prior arrangement

Condition: excellent (used), Year of construction: 1994, Langzauner Edge Sanding Machine EK 3/4 - School Machine - Table width: 350 mm Table length: 1,000 mm Maximum sanding belt width: 150 mm Sanding belt length: 3,000 mm Dcjdpex Nrfwsfx Ac Noc Belt speed: 22 m/s Main motor: 2.2 kW Round sanding support Oscillation Height adjustment: table, manual Sanding belt tiltable: Yes Conformity marking: CE mark Total connected load: 4.6 kW Space requirements: Length: 1.7 m Width: 0.85 m Height: 0.9 m Location: ex stock 54634 Bitburg - Immediately available -

Condition: excellent (used), The Formid Limited is a roll forming line with an electrically extendable support system for forming sets up to 800 mm. The drive is manual via a bevel gearbox. It can be combined into a single electric system and measures the width of the spacing. Mounted on 45 mm shafts, 12 keyways, shaft distance 145 mm. Axle spacing 250 mm. Shaft spacing minimum 200 mm from each other and 800 mm apart. Powered by a 380-volt electric motor with 15 kW. The system is suitable for profiles with frequently varying center widths. It features center roller supports to maintain the lower layer of the steel strip, which in turn supports the base strip substrate in a defined profile. The system also includes 16 stations. Dsdpfx Aswxv Izoc Necc

Condition: used, Year of construction: 2001, total length: 1,200 mm, total width: 800 mm, total height: 1,700 mm, Empty weight: 500 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive Djdowu Tnkopfx Ac Njcc - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 371 - Drive system: Conventional - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 1.1 - Shaft diameter [mm]: 50 - Transport dimensions: 1200mm x 800mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1999, Length:1800mm Width:1900mm Height:2200mm Weight:2900kg Dsdpfeycu E Eex Ac Nocc

Condition: used, functionality: fully functional, Samco Unilev 15 Edge Sander Belt dimensions 150 x 2170 mm Two belt speeds Adjustable shoe Tabletop adjustable at an angle of 0-30 degrees Dodpfoycpz Uex Ac Necc Adjustable grinding height Pneumatic sanding belt tension Sanding belt oscillation Motor power 3kw

Year of construction: 2021, condition: like new (used), functionality: fully functional, ● Our machine manufactures ceiling U, ceiling C, wall U, and wall C profiles with 4 different dies. ● It features a total of 12 stations, all of which are heat-treated and ground. ● Equipped with a flying shear. Processes up to 80 meters of sheet metal per minute. ● This is a high-speed, serial-production machine; no constant adjustment required—set it once and it runs continuously. Dcodpfxoyf Rcfs Ac Noc URGENT SALE, THAT’S WHY THE PRICE.

Condition: refurbished (used), Dear customers currently we offer a disc sanding machine of the brand Zimmermann. Here are some technical datas: Dcedpfjx Ahi Ajx Ac Njc Disc diameter: 600mm, double sided Table length: 755mm Table width: 285 mm Table tilling up and down: 30/45° Protractor: 60/60° Power: 3,5 kW Speed: 1.500 rpm Dimensions: L 90 cm x B 80 cm x H 140 cm Weight: 390 kg with protractor We are looking forward to your questions and inquiries.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, The rotatable turret module enables precise final sanding of eight different, quickly adjustable radii (2, 3, 4, 5, 6, 8, 10, and 12.5 mm) as well as continuously adjustable 45° chamfers up to 16 mm wide, using an oscillating sanding belt. • Workpiece support extendable by 380 mm • Sanding belt oscillation with pneumatic belt cleaning • 16A socket for feed • Extraction port Ø 80 mm • Voltage: 400 V / Power: 2.2 kW Pre-milling unit • 1,100 W / 220 V • Infinitely variable up to 25,000 rpm • Milling range up to 12.5 mm radius Chassis Workpiece support Djdpfeyf Hd Ssx Ac Nocc

Condition: like new (used), DEMONSTRATION MACHINE For sale is an as-new JET belt and disc sander JSG-31A with a 300 mm disc diameter. The demonstration unit is in original condition, so you receive the full warranty. Technical specifications: - Motor power: 1.1 kW / 1.5 HP / 230 V - Disc diameter: 300 mm - Disc speed: 2,700 rpm - Disc sanding table size: 230 x 420 mm - Sanding table tilt range (disc): -45° to +15° - Belt dimensions: 150 x 1,220 mm - Belt speed: 11.5 m/sec - Belt sanding table size: 190 x 330 mm - Sanding table tilt range (belt): -45° to 0° - Sanding arm tilt range (belt): 0° to 90° - Extraction port: 100 mm - Dimensions (LxWxH): 830 x 700 x 1,400 mm - Weight: 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Shipping (by freight forwarder): Austria: € 70.00 incl. VAT Germany: € 90.00 incl. VAT South Tyrol: € 110.00 incl. VAT Dedoycc Tdjpfx Ac Nscc Related terms: JET JSG-31A, belt sander, disc sander, belt, wood, combination sander, 150x1220, 300 mm, sanding machine, professional, workshop, stationary, machine Reference: R-A0117

Condition: like new (used), Year of construction: 2026, operating hours: 8 h, functionality: fully functional, machine/vehicle number: SG202640, total length: 1,500 mm, power: 4 kW (5.44 HP), overall weight: 650 kg, total width: 800 mm, total height: 1,150 mm, input voltage: 380 V, warranty duration: 12 months, Pipe Shrinking, Profile Forming Machine SG40NC Machine Model: SG40NC Product Description: Microcomputer-controlled and hydraulically driven. Equipped with a mobile foot switch featuring three functions: automatic operation, emergency stop, and continuous emergency stop, ensuring high safety. Capable of multiple processing methods including tube Forming, tube expanding, tube end blunting, and bulging. Processed shapes include concave-convex joints, elongated, flat, square, flared, angled, V-shaped, open elbow, etc. Molds can be changed according to the user’s processed products. Mold replacement is simple and convenient, facilitating flexible production. The machine has a compact and sturdy structure, uses hydraulic power, operates stably with a high yield rate, minimal vibration, and low noise. It can perform tube end reduction, expansion, bulging, upsetting rib forming, and other shape forming processes. Suitable for processing various shapes at the connecting parts of pipe fittings (for insertion), automotive oil pipes, air ducts, water pipes, and air conditioning pipes. Maximum Tube Forming Capacity mm Ø40×2mm Maximum Tube Forming Length mm 100mm Motor Power kW 4 Dedpsyak Ikefx Ac Njcc Weight kg 600