Used Profile Punching for sale (6,939)

Year of construction: 2000, condition: used, machine/vehicle number: 30336, Article number: MA999 Manufacturer: Noble Type: Micromat 203 Year of construction: 2000 Machine number: 30336 Control: CNC he 1904 Length [mm]: 1500 Width [mm]: 1250 Height [mm]: 1650 Weight [kg]: 1600 Power supply: 380V Dwsdpfx Asdacqhsb Tsf Working hours [h]: 1858 Positioning range x/Y/Z [mm]: 760 X 310 Cutting force [to]: 20 2 piece of multimedia tools / 3 x / 6 x with various tools Accessories: manual / schematics

Condition: used, functionality: fully functional, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, table length: 2,000 mm, table width: 1,000 mm, input voltage: 410 V, overall weight: 7,500 kg, Equipment: centralized greasing system, documentation/manual, emergency stop, Amada Aries 245 in good working condition, supplied with tools (9 tools with various clearances for different sheet thicknesses). Dwsdpfx Asxyzu Heb Tjf

Condition: as good as new (ex-display), Year of construction: 2024, Punching force 500 kN Max. Punching capacity Ø 27 in 13 mm throat depth 130 mm Motor power 3.0 kW Dwjdpjxyy Apjfx Ab Tsf Stroke rate with 20 mm stroke 25/min Maximum stroke 30 mm Weight 295 kg

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 1203697, Bros. punching press Make: Haulick & Roos Type: RVD 8/800 NS Press with adjacent console: Haulick & Ross RVD 80-800NS Eccentric press with double connecting rod with 4-fold bearing mounted eccentric shaft No: 1203697 YEAR OF MANUFACTURE: 1990 Press force: 800kN Speed: 30-300/min. Drive: 26kW Ram stroke: 4-60mm Dsdpfeudn Utex Ab Tjwf ram adjustment: 80mm Table: 800x640mm Fold-through hole: 780x60-160mm Table over floor: 1240mm Frame width: 780mm Lateral upright width: 350mm Installation height max. stroke bottom/ram top: 300mm Space required for press (LxWxH): 3200x1700x3000mm Control cabinet (LxWxH): 1800x400x 1900mm Weight: 12.000kg Reel: Eigl 2527-90 Driven: no Straightener with strap loop sensor: Eigl RST W37/300 (2528-90) Max. width: 300mm Max. Thickness: 3mm Number of rolls: 5 Feed rate: Haulick & Roos RS 260/120°/2727 Max. Feed length 260mm Max. Width 260mm Max. Max. thickness 3mm Feed speed 40m/min. Material cross-section up to 800mm?

Condition: as good as new (ex-display), Year of construction: 2024, shaft diameter: 60 mm, bending machine model AHB 60 Dwedodkxvmepfx Ab Tjf ZOPF - three roller driven - two hydraulic adjustments - 2 digital readout with memory - standard roller set - horizontal and vertikal use - 60 mm shaft HS-Code: 8462 2998

Condition: good (used), PROFILE SANDER FOR WOOD AND WOOD DERIVATIVES, CE Dedpfx Absuh A Uis Tewf NO. 1 ADJUSTABLE BELT SANDING UNIT INSTALLED POWER 3 KW

Condition: excellent (used), Year of construction: 2012, Article number MA1176 Dedpovutvvsfx Ab Tswf Manufacturer Metallkraft Type PRM30DF Year of manufacture 2012 Machine number 4535121037 Length [mm] 650 Width [mm] 750 Height [mm] 1400 Weight [kg] 200 Connection power 380 V

Condition: excellent (used), Trumpf Here we offer a laser and punching machine. Technical data: Network: 400V/50 Hz Fuse: 3 x 100 A Connection power 65 kVA Working area X x Y without repositioning Combined operation 2585 x 1280 mm Punching operation 2585 x 1370 mm Laser operation 2585 x 1280 mm Power: Dsdpfjm Ak Hujx Ab Tjwf Laser 2000 W Maximum sheet thickness 8mm Maximum punching force (including 20 kN hold-down device) 220 kN Active hold-down device (programmable in stages) 4.5-20 kN Maximum workpiece weight 200 kg Maximum clearance height In punching operation 35mm 1m laser operation 22mm Speeds: X-axis 90 m/min Y-axis 60 m/min Simultaneous Stroke sequence Punching 900 min Signing 2800 min C-axis Punching 60 revolutions/min Thread forming 330 revolutions/min Tools Tool positions on the linear magazine 19 with 2 clamps Number of tools when using multitool 19 to 190 tools Rotation of all tools 360° Tool change time 1.5-5 s Maximum punching diameter Single stroke 76.2 mm on all tool positions Standard multicut 200mm Maximum bending height 25mm Maximum part size 500 x 500 mm Accuracy: Position deviation ± 0.1 mm Average position spread ±0.03 mm TRUMPF CNC control: Basis: Siemens SINUMERIK 840D Type: TC 6000 L 1300 Loading and dismantling must be carried out by the buyer! Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, punching force: 55 t, throat depth: 500 mm, sheet thickness steel (max.): 20 mm, working height: 1,000 mm, overall weight: 1,200 kg, total length: 1,300 mm, total width: 800 mm, total height: 1,800 mm, power: 5.5 kW (7.48 HP), mount diameter: 40 mm, Punching force 550 kN Max. Punching capacity Ø 40 in 10 mm throat depth 500/750 mm Motor power 5 kW Stroke rate with 20 mm stroke 38 /min Dwedexyy Aiepfx Ab Tjf Maximum stroke 60 mm Machine weight with throat depth 500: 1150 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, degree of automation: automatic, actuation type: electric, SAHINLER SDK 8 Sheet Metal Flangers Maximum sheet diameter: 4500 mm Minimum sheet diameter: 720 mm Maximum flange radius: 100 mm Maximum sheet thickness (S235): 8 mm Maximum sheet thickness (S355): 5 mm Motor power: 11 kW Machine weight (approx.): 4400 kg Length: 4500 mm Width: 1250 mm Height: 2700 mm Power supply: 400 V Year: 2020 Condition: Like new Includes one set of flange forming rollers with R 25 radius Workpiece support (two approach speeds: 0.35 / 0.68 m/sec) Lower and upper rollers driven by hydraulic motor and planetary gearbox Hydraulically adjustable material holder (up/down) Controller with touch screen Dwjdpfx Abexyut Ae Tjf Electrical components: Siemens (Germany) Manual controller for setting upper roller and material holder (up/down) Manufactured in compliance with EU safety directives (CE mark) and ISO 9000.

Condition: new, Year of construction: 2025, Bending machine ZOPF ZB 140/3 H 2 - compl. with standard roller set, - digital readout for left and right axis - hydraulic side guides - three smooth driven rollers - planetary movement of bending rolls Dsdpfxjd A Nb He Ab Tewf - working with both vertical and horizontal shafts - built according to the CE rules - bending capacity steel up to 110x25 mm -shaft diameter 110 mm -Rolls diameter 350 mm -working speed 5 m/min -installed power 7,5 kw -weight 2950 kg -module max Wcm3 157 -400 Volt 50 Hz. 3 ph.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, ram adjustment: 150 mm, table length: 2,000 mm, table width: 1,200 mm, pressing force: 250 t, stroke adjustment: 40,200 mm, overall weight: 55,000 kg, DGUV certified until: 09/2026, Raster punching and forming press RSU 2500 - 2000 P Desch compact drive unit Dwedpsxcbbrsfx Ab Tof Electronic press force measurement system Hydraulic overload protection system 3-piece tie rod cast construction Tool holder Table and ram clamps Raster VWA hydraulic roller feed, band width 500 mm, with Topochrom roller coating Ram area 1000 x 2000 mm Strokes: 20 - 150 1/min Stroke adjustment: 40 - 200 mm Optional with Kohler strip feeding system 20030.400/9-2000.2H Optional with Kaschwig soundproof cabin

Year of construction: 2002, condition: used, machine/vehicle number: 54, Item number: MA961 Dwedpfxjcq Nbwo Ab Tef Manufacturer: Boschert Type: P-60 Year of manufacture: 2002 Machine-No.: 54 Length [mm]: 1800 width [mm]: 3000 height [mm]: 1991 weight [kg]: 5800 Connected load: 380V / 4 KW Stroke [mm]: 50 Working height [mm]: 915 Punching force [to]: 60 Table size LxW: 1100 mm X 3000 mm accessories: manual table supports

Condition: used, manufacture Tucker Type ERC80/ERF23FBGR/ERT In our opinion, the machine is in good used condition and can be viewed under power by appointment. Punch riveting system: - ERC80 - ERF23 - BGR - ERT There are approximately 150 pieces available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Dwodsxwp Nyopfx Ab Tsf Changes and errors in the technical data and information as well Subject to prior sale!

Condition: new, Year of construction: 2024, 5 workstations for flat material, angle steel, bar steel, punch or notching, and bending station. Punch with quick-change punch device Notching station with support table Flat steel shear Profile steel shear for angles and bar steel Bending station Electric limit stop Technical data Dedpfx Asxyyyzob Tewf Strokes per minute with 15mm stroke: 32/min. Punching force: 600 kN Throat depth: 250/500 mm Hole diameter/thickness up to max. Ø 40×11 Flat steel (2 tilt) up to max. 350×15 mm Flat steel (5 tilt) up to max. 350×15 mm Angle steel 90 degrees up to max. 120x120x10 mm Bar steel up to max. 45 mm Square steel up to max. 40 mm Notching up to max. 10 mm Bending capacity: up to max. 150×10 mm Motor power: 5.5 kW Weight Bendicrop 60SD – 2,012 kg

Condition: used, Single-column hydraulic press HIDROLIKSAN model C-Type 100 Serial no. C100UT16/16 Year of manufacture: 2016 Pressing force: 100 tons Ram stroke: 400 mm Throat depth: 400 mm Daylight (installation height): 495 mm Table size: 900 x 700 mm Ram area: 900 x 700 mm Max. tool weight: 500 kg Table height above floor: 1,000 mm Max. hydraulic operating pressure: 240 bar Hydraulic tank capacity: 180 liters Rapid approach speed: 30 to 100 mm/sec Pressing speed: 3 to 10 mm/sec Return speed: approx. 100 mm/sec Drive power: 11 kW Power supply: 400 V, 50 Hz - Table and ram with 18 mm T-slots - Operation via two-hand control console or manual control - SIEMENS S7 1200 control with Simatic HMI touch panel - SICK Flexi Soft safety control - SICK light curtain as reach-in protection in safety mode - Programmable ram stroke, pressing force, and stroke speed via control - Pressure and position shut-off - Pressure holding time infinitely programmable - Ram equipped with direct linear measuring system - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Approx. 2,496 operating hours - UVV safety for manual loading, last inspection October 2024 Required installation space (L x W x H): 2,300 x 1,700 x 2,750 mm Dwedpsxf Uqrsfx Ab Tof Weight: 8 tons Very good condition

Condition: new, Year of construction: 2023, shaft diameter: 80 mm, Profile bending machine AHB 80 - electro-hydraulic ring/profile bending machine - hydraulic bottom roller adjustment - Hydraulic side roller adjustment - Lower shafts individually adjustable - Three driven rollers - divided roller segments - digital display - touch screen - Hardened shafts and standard rollers - Hydraulically adjustable side straighteners - Can be used horizontally and vertically - Mobile control panel - CE mark / declaration of conformity Shaft diameter 80 mm hardened Fully hydraulic Motor 400 Volt 50 Hz 3 ph. Weight approx. 1,700 kg Dwedpfsqxcy Hex Ab Tsf Dimensions 1340 x 1390 x 1640 mm

Condition: good (used), HERKULES BO 230 K2 / Ring and Profile Bending Machine incl. Roller Sets Djdpfx Aexbh Trsb Tswf -Technical data see images -6 roller sets -Operating tool -Machine equipped with transport wheels Dimensions: LxWxH 1.6x1.6x1.7 meters Weight 1.8 tons Subject to errors and input mistakes.

Condition: used, Year of construction: 1997, operating hours: 50,161 h, machine/vehicle number: 080163, Trumatic 600L 1600 for sale. Punching part is in good condition. Laser part needs to be looked after Dwsdpfxou Hxmze Ab Tef

Condition: good (used), table size: 350x350mm Dedpfx Aefm A Ameb Tswf

Condition: new, Year of construction: 2024, The machine has 5 workstations: • Punching station • Flat bar shear • Angle bar shear • Notching station • Bar steel shear (round and square) Dedpfx Ajxyyyusb Tjwf Technical data Strokes per minute with 20 mm stroke: 40 /min Throat depth 500 mm Punching force 800 kN Hole diameter and thickness up to max. 40×14 mm Flat steel up to max. 450×15 or 300×20 mm Angle steel 90 degrees up to max. 152x152x13 mm Angle steel 45 degrees up to max. 70x70x7 mm Bar steel up to max. 45 mm Square steel up to max. 45 mm Notching up to max. 12 mm

Condition: like new (used), knife: WP flight circle (ø): 136 mm drilling: 40 mm Djdsxvy Ikspfx Ab Tjwf length: 25/120mm material: steel Labelling: BG test

Condition: used, Year of construction: 1998, Technical Data: Grinding area (incl. grinding wheel width 50 mm): 700 x 320 mm Grinding height: 400 mm Longitudinal stroke: 740 mm Cross stroke: 270 mm Clamping surface of table: 1000 x 250 mm Distance table to spindle center: 650 mm Rotary table diameter: 200 mm Table load capacity, max.: 400 kg Spindle drive, stepless: 6 kW Grinding wheel dimensions, max.: ø300 x 60 x 127 mm Coolant system: 170 l Weight - complete equipment: 4600 kg Equipment: - Fully electronic multi-axis control system Brand NE (manufacturer Schleier) - Brushless AC servo and spindle drives - Manual feed of numerically controlled axes via movable electronic handwheel, axis selection, rapid traverse +/- as well as a digital increment display integrated into the handwheel. - Free-standing electrical cabinet incl. operating hours counter - Cooling unit - Automatic central lubrication - Working area enclosure - Oil collecting trays - CE marking Accessories: - 6 x grinding wheel flanges incl. grinding wheels Djdpjxvy Hgsfx Ab Tewf - 3 x grinding wheel flanges - 1 extractor device for grinding wheel flange - 1 balancing arbor - 1 set of leveling plates and screws - Extraction device - Raised vertical column for extraction unit

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools Dwsdjxmfc Uepfx Ab Tsf - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) - Ball tables - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm

Condition: good (used), Pressure: 25 t cutting capacity: thickness / width: 1,25/ 140 mm Strokes per minute: min./max.:250 strokes/min. Dwsdpfx Aefim Dwob Tef ram stroke - max.: 20 mm Table surface usable: WxD: 440 x 360 mm