Used Profile Bending for sale (8,692)

Condition: new, bending length: 1050sheet thickness: 1upper roll diameter: 56 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  - Digital readout for displaying position of the backroll - Body cover - Hardened rolls EURO 336,-- Hjdpjd Ab Uyofx Afisfn We have many references!

Operating hours: 4,702 h, condition: used, Applicable material: Metal Auction item. Metal bending machine in working condition. Hodpfx Afsxmfcbsiefn Was changed to make wavy sheets, visible in pictures. Few years ago was replaced pump.

Condition: new, neu ca. 4 Wochen ab Auftragse Italien 20830 € 399.94 € 40 to 250 mm 200 x 20 mm 1100 x 620 mm 55 mm 4,7 - 9,1 mm/s 45 mm/s 45 l 3 kW 950 mm 1250 mm 900 mm 1000 mm 750 kg Hfsdpfxexh Rulo Afion 2 holder pins, height 110 mm (higher ones on request) Manual stop 500 mm with millimeter scale Adjustable speed 2 handwheels for adjusting the stroke and retraction point Precise hydraulic stroke adjustment, even under pressure Two-hand operation Huge range of tools, prices on request ALTERNATIVE: Version with CNC control

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, actuation type: electric, roller diameter: 90 mm, working width: 1,270 mm, sheet thickness (max.): 3 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), input voltage: 400 V, rotational speed (max.): 6 rpm, type of input current: three-phase, Equipment: cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, sheet metal roll bending machine BOLUK BM 1270 x 90 - 2.5 mm NEW! for sale. manufacturer: BOLUK 1270X90mm year of manufacture: 2024 Bending Length: 1270 mm Bending capacity: 2.5 mm Roller diameter 90 mm - SAE 1050 certified high tensile steel rollers - Wire grooves at the ends of the rollers (4/6/9) mm - Manually adjustable rear roller - Mobile control panel with foot pedal - Precision bending with brake motor - Conical bending device - Manually foldable end - Cast iron main frames Bending speed 6m / min Motor power 1.1 kW 50Hz 380v Wire groove diameter 4/7/10 mm Hfodpfsxhub Aex Afien Machine dimensions 1850x700x1200 mm Weight 520 kg

Condition: used, Year of construction: 2007, Bending length 3050 mm Max. prebending capacity 13 mm Max. rolling capacity 16 mm Top roll dia. 340 mm Lower roll dia. 340 mm Side rolls dia. 240 mm 4-rolls Fully hydraulic Hydraulic drop end Digital read out of roll positions Equipped with: Hfjdsxhgqiepfx Afien Top support Side support

Condition: ready for operation (used), Year of construction: 2004, operating hours: 40,000 h, functionality: fully functional, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, working width: 2,780 mm, working height: 1,090 mm, TECHNICAL DETAILS Max. sheet length: 2,780 mm Max. sheet width: 1,500 mm Max. bending length: 2,550 mm Sheet thickness (stainless steel): 2.5 mm Max. flange height: 185 mm Sheet thickness (aluminium): 3.0 mm Max. bending angle: ± 135° Working height: 1,090 mm MACHINE DETAILS Dimensions & Weight Hsdpfx Afsxhfbtsiofn Dimensions: 12,500 x 7,400 x 2,600 mm Approximate machine weight: 19,000 kg Total power requirement: 43 kW Operating hours: 40,000 h EQUIPMENT Automatic/manual loading via PCD Automatic loading system with lift table Automatic bending center P4-2516 Automatic tool setup ALA, symmetrical CLA Semi-automatic unloading of finished parts via SAP

Condition: ready for operation (used), A mandrel tube bending machine Sommer is available. Tube diameter range: 15mm-65mm, tube feed length: 3000mm, max. bending radius: 150mm, chuck: 200mm, tube clamping: hydraulic. Including accessories. Documentation available. An on-site inspection is possible. Hfedpfx Ajxl Up Uofisn

Condition: excellent (used), Year of construction: 2006, 1 x Profile Projector Tesa Scope 300 V Year of manufacture: 2006 Technical Data: Screen diameter: 300 mm Magnification: 10x + 20x Hfjdpfx Afjxl Ulijijn Travel paths: X: 200 mm Y: 100 mm Resolution: 0.001 mm Further technical data to follow. The projector can be inspected under power at any time.

Condition: ready for operation (used), Profile belt sander Swivel table Price 800. Hedjt R Tl Sspfx Afisfn

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 10,000 kg, input voltage: 380 V, input frequency: 50 Hz, feed length X-axis: 120 mm, feed length Y-axis: 200 mm, feed length Z-axis: 170 mm, GB-A1500 Fully automatic high-speed bending center Bending length (mm): 1500 Bending height (mm): 4side160 4side170/2side350 4side350 Minimum molding size: (Fold 4 sides) (mm) 4 sides 160: 350*250 4 sides 170/2 sides 350: 350*250 4 sides 350: 350*250 Maximum bending size (mm) 1500*1500 X-axis travel: 120 Y axis travel: 4 sides 160: 200 4 sides 170/2 sides 350 305 4 sides 350: 305 Z-axis travel: 4 sides 160: 170 4 sides 170/2 sides 350: 357 4 sides 350: 357 Pressing knife height: 4 sides 160: 177 4 sides 170/2 sides 350: 177 4 sides 350: 357 Number of axes: suction cup: 11 Pressure arm: 14 Machine power (KW) suction cup: 34.7 Pressure arm: 36.35 Maximum bending thickness of aluminum plate (mm): 3 Maximum bending thickness of iron plate (mm): 2 Maximum bending thickness of stainless steel (mm): 1.5 Maximum bending speed (s/knife) : 0.2 Overall dimensions (mm) long (front) 4 sides 160: 1890 2-4 sides 350 suction cups: 1890 2-4 sides 350 pressure arm: 1890 Width (side) 4 sides 160： 3300 2-4 sides 350 suction cups：3536 2-4 sides 350 pressure arm: 4127 4 sides 160: 2666 2-4 sides 350 suction cups: 2946 2-4 sides 350 pressure arm: 2946 Weight (approx. kg) 4 sides: 160 2-4 sides 350 suction cups: 10000 2-4 sides 350 pressure arm: 10000 1) Machine frame is heaviest welded con struction,stess released by annealing process,this has minimized deflection of the frame. Hfjdpev Ikvgsfx Afijn 2) Y Axis full closed loop control 3) Proportional hydraulic compensation system to prevent deformation 4) German HEIDENHAIN linear encoder 5) Taiwan HIWIN ball screw and linear guide rail ,high performance AC Japanese Yaskawa AC servo motors and drives 6) Rich functions CYBELEC/DELEM professional control system 7) Electro-hydraulic servo synchronization module and Greman BOSCH pressure module 8) +/-0.01mm repeat accuracies 9) +/-0.01mm parallelism accuracies

Condition: used, Year of construction: 2001, Technical details: tube diameter: 74 mm wall strength: 5 mm tube diameter min.: 10 mm tube diameter max.: 74 mm round material: Stahl max: 40 mm control: Trumpf-Rohrtechnik IsoBend 2.0 bending radius max.: max: 300 / min: 65 mm bending angle max.: max: 195 / min: 0,1 ° bending speed: (°/s): 90 / (°/s²): 190 °/s tube pipe draw up length: 3000 mm work pressure of hydraulic: Betriebsdruck max: 300 bar total power requirement: 43 kVA weight of the machine ca.: 8,5 t dimension machine xH: 6,5 x 1,6 x 1,6 m dimension control panel: 0,8 x 0,6 x 1,4 m It is a multi radius bending machine with bending head and swivel arm. (Cold bending machine) Hedpfxou Ibvhj Afiofn Possible applications: only for processing pipes, round steels and wires made of steel, stainless steel and non-ferrous metals. Due to the cross slide of the bending head, the following advantages can be listed: -free programmable X and Y axes -level change cross slide: tical travel = 300mm (vert. position freely programmable) and max. horizontal movement 350mm -Bending forms of different sizes within a stack of bending forms can be approached as required. The bending direction is to the right. Control software Trumpf-Rohrtechnik IsoBend 2.0 Hydraulic unit with high-pressure multi-flow pump Mandrel retraction unit Slide rail (speed max. 362mm/sec. and acceleration max. 1100 mm/sec.) i.D. *

Condition: new, sheet thickness: 45bending length: 2600upper roll diameter: 460 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device Hjdpfxed Ab Rho Afijfn - In accordance for CE norms Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 5.100,-- - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 12.500,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: refurbished (used), functionality: fully functional, Year of construction: 2006, control type: PLC-controlled, degree of automation: semi-automatic, pipe diameter (max.): 60 mm, mandrel length: 6,000 mm, year of last overhaul: 2025, Equipment: CE marking, emergency stop, Mandrel Bending Machine S6006 ----- For producing dimensionally accurate tube geometries with bending radii of up to 1.5xD → Maximum bending capacity tube 60.3 x 4 mm (400 N/mm²) → Maximum bending capacity tube 60.3 x 2.6 mm (stainless steel) → Total connected load 5 kW → Tube feed length 6 m Robust and durable steel construction with a force-locked design—no torsion-prone structure such as a separated construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive for the bending axis. The control system's touch display enables easy and intuitive programming and operation of the machine. After the tube is loaded, it is fixed by a chuck on the carriage. This ensures precise positioning of the tube, allowing the creation of dimensionally accurate geometries. Standard equipment also includes geometry verification before the bending process: If the bending process is started from the wrong position, the machine will not allow it. This prevents incorrect operation. Optional additional features offer more convenience and increase output and thus the efficiency of the system. Hedsw Sr Ucopfx Afiofn Data transfer from the optional TBS-3D tube calculation software (PC version) is done via USB stick or via FTP access from the computer to the machine control. USB or LAN connector (RJ45) are standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard equipment: → Electromechanical drive for bending axis 2.2 kW → Rotation speed 2.9 rpm (=17°/s) → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1 mm → Electronic torsion measurement ±0.1° → Manual stop system (length overtravel stops) → Manual indexing system (15° increments for torsion) → Three-jaw chuck to clamp the tube in the carriage → External control panel PLC Control: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot switch operation → Data transmission via (W)LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly at the machine. The control system calculates the feed and bending angle directly after entering length and angle values. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + torsion) → Mobile version (with castors) → Radius extension Sample image shows a similar machine

Condition: excellent (used), functionality: fully functional, spindle diameter: 30 mm, overall weight: 950 kg, table length: 1,100 mm, table width: 850 mm, SPINDLE MOULDER IN EXCELLENT TECHNICAL AND VISUAL CONDITION TECHNICAL SPECIFICATIONS: - Tiltable spindle from -10 to 45 degrees - Quiet operation - Control panel operation - Polish manufacturer - Table dimensions: 110 x 85 cm - Carriage with spindle approach and height adjustment - Carriage dimensions: 90 x 40 cm - Material clamp - Spindle speeds: 3000/4500/6000/9000 rpm - Model: DFCB Jaroma - Extraction connection 140 mm and 80 mm - Spindle height adjustment - Original factory paintwork - Motor power: 4.5/5.9 kW - CE mark - Fully adjustable fence Machine dimensions: - Length: 3200 mm - Width: 1900 mm - Height: 1750 mm Hedjxlyhcspfx Afiofn - Basic machine weight: 650 kg - Weight with full equipment: 950 kg Machine financing available via leasing or installments. Just visit our website: jbsmaszyny.pl You are welcome to test the machine. Where can you see our machines? JBS MASZYNY STOLARSKIE WOLICA DRUGA 26 23-310 MODLIBORZYCE Nationwide machine transport! Tel: 663 495 647 German Tel: 664 335 475 English Tel: 530 632 386 English

Condition: good (used), Year of construction: 2008, functionality: fully functional, grinding length: 2,000 mm, grinding width: 850 mm, CNC Precision Surface and Profile Grinding Machine Technical Specifications: Grinding length 2000 mm Grinding width 850 mm Travel, transverse 750 mm Distance from table to spindle center 900 mm (or 800 mm with intermediate plate) Magnetic plate size 2000 x 700 mm Table load without magnet 3500 kg Table speed 60 m/min. Spindle drive 26 kW Grinding wheel dimensions 500 x 150 x 203.2 mm Hfjdpfx Ajxgryaefien Grinding wheel peripheral speed 35 m/s control Siemens 840 D total power requirement 155 kVA weight of the machine ca. 15 t dimensions of the machine ca. 8815 x 4185 x 2963 mm

Condition: used, Year of construction: 1996, Technical details: grinding length: 1370 mm grinding width: 560 mm workpiece height: 800 mm total power requirement: 50 kW Hfsdpfx Ajw S Hy Hefien dimensions of the machine ca.: 9 m ABA Z&B 2000, profile grinding machine with swivel dresser Mounting fixtures: magnet, dividing head E-axis dresser B-axis dividing head *

Year of construction: 2024, condition: new, 1050 mm 5,5 mm 5,0 mm roll diameter 130 / 195 mm 2,2 kW 1050 kg Hfodpfx Afjq Sz Aheien 2150 x 900 x 1200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment

Condition: new, bending length: 2050sheet thickness: 3upper roll diameter: 110 Technical specifications: - Back roll with motor - Cone bending device - Hardened and polished rolls Hfodpfx Afed Ab N Aoisn - Body is made of St 52 steel - Main motor with brake system - Top and bottom rolls are driven bybrake electric motor, gears and gearbox system - Portable control panel  - Cast iron body - Movement of the back and lower rolls up and down manually - In acccordance with CE norms Options: - Back roll powered by electric motor EURO 1.260,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Hardened rolls EURO 1.136,-- - Special voltage EURO 480,-- - Material feeding table - Lower roll is powered by electric motor We have many references!

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD Hsdpfx Aottah Rsfiefn → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: used, Year of construction: 2018, CNC machining center ELUMATEC SBZ 607 equipped with 11 tool stations (9 motors + 2 screwdrivers), designed for all main standard machining operations on window and door profiles. It enables milling operations such as drainage slots, lock cases, recesses for mounting plates, ventilation holes, as well as drilling for reinforcement brackets, transoms, tilt-and-turn locks, pins, and accessories. It is also prepared for free-form milling of gasket grooves and marking of closing components. Hjdpjxltxhefx Afisfn Technical specifications: Tool stations: 11 Maximum profile length: 4,000 mm Maximum profile depth: 400 mm Spindle speed: 24,000 rpm Perfectly suited for the complete processing of aluminum or PVC profiles, ideal for window and door manufacturers or industrial producers.

Condition: used, functionality: fully functional, Bariola press brake 3050 x 100 ton CNC ESA Model PBI 100/30NCS Distance between uprights: 2600 mm Stroke: 150 mm Weight: 7000 kg Hodpfjxlr Uhsx Afijfn With compensation table Used machine Internal code: SVR 360

Condition: excellent (used), Year of construction: 2021, Segmented sheet metal bending machine for up to 2 mm thickness, length 1370 mm. Hfjdpfx Aoxlqycofijn

Condition: used, pressure 32 t stroke 250 mm table-size 500 x 760 mm work height max. 925 mm bending speed max. 25 mm/sec tank capacity 80 l Pressure power 320 bar total power requirement 5,5 kW Hfodpegvkigsfx Afijn weight of the machine ca. 0,8 t dimensions of the machine ca. 1,3 x 0,5 x 1,3 m ding height: 200 mm Cutting capacity max. (St): 150 x 14 Punching capacity max. (St) Ø 35 Guide height: 200 mm

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ---- For the production of pipe geometries with bending radii from 1.5xD → Maximum bending capacity: pipe 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity: pipe 30 x 30 x 3 mm → Maximum bending capacity: pipe 42.4 x 2 mm (stainless steel max. Rp0.2 260 N/mm²) → Total connected load 3 kW → Pipe insertion length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and twisting axes. The control system's touchscreen display enables simple and intuitive programming and operation of the system. After the pipe is inserted, it is secured in the carriage by the chuck. This enables precise positioning of the pipe and thus the creation of dimensionally accurate geometries. The standard also includes a check of the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine will not issue a release. This eliminates the risk of incorrect operation. Optional additional features provide greater convenience and increase output, thus increasing the efficiency of the system. Data exchange from the optional TBS-3D pipe calculation program (PC version) takes place via USB stick or network. Existing pipe geometries can be imported using the software. Standard equipment: → 1.5 kW servo drive for the bending axis → Adjustable speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm Hedjtr U Hlspfx Afiefn → Feed servo drive → Rotation servo drive → Three-jaw chuck for locking the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC control: → 10" color touchscreen → ETH 10/100, X2X Link, 2xUSB → Foot switch operation → Data transfer via LAN or USB network → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. The control system calculates the feed values and bending angles directly after entering the length and angle. Power consumption: 400V 16A Dimensions: L: 2.3 m x W: 1m x H: 1.4m Weight: approx. 1200 kg

Condition: new, pressure 28 t stroke 180 mm table-size 300 x 550 mm diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec Hfsdpfx Afsgvkmreion return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t total power requirement 4 kW dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.