Used Profil Sparying Machine for sale (68,065)

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base Knedpfjuz If Nox Apmea - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: used, Thread rolling machine, cold rolling machine, thread forming machine, profile rolling machine Knedpfx Ash A S Htspmea Manufacturer PEE-WEE, Type P 24 Q Serial No. LC2403099, Year of manufacture 2004 Rolling force, max. 24 tons Tool diameter, max. 200 mm Rolling spindle diameter 69.85 mm Tool bore diameter 70 mm (nominal diameter) Receiving length, tool length, max. 180 mm Workpiece diameter, max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 RPM Hydraulic motor power approx. 3 kW Rolling drive motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Swiveling rolling spindle for thread through-rolling - Rolling spindle speed in 4 stages via gear change - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons Good condition Plunge rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The thread length is a maximum as long as the rolling tools are wide. Through-rolling tools: If the thread length is greater than the rolling tool width. Through-rolling tools have 3 sections - the inlet, the calibrating section, and the outlet. Grooved rollers have no pitch and are swiveled with the helix angle of the profile to be rolled. Helix rollers differ from grooved rollers by having a pitch in the profile. The sum of the helix angle and the swivel angle results in the helix angle in the workpiece.

Condition: used, Profile ring bending machine with manual crank drive, year of construction approx. 1950 Lower rollers Ø 56 mm with grippy knurling Lower roller width: 115 mm Knsdpfxjxbtx Hs Apmja Upper roller Ø 100 mm Upper roller width: 110 mm - Symmetrical roller arrangement with 2 driven lower rollers - Upper roller adjustment 55 mm via threaded spindle - Manual crank drive with 6:1 gear ratio Required space (L x W x H): 440 x 660 x 1000 mm Weight: approx. 200 kg

Year of construction: 2009, operating hours: 5,387 h, condition: ready for operation (used), functionality: fully functional, overall weight: 12,000 kg, total length: 15,000 mm, rotational speed (max.): 24,000 rpm, working length: 7,500 mm, Functions: Sawing, notching, milling, drilling, thread tapping, lock case machining TECHNICAL DETAILS Number of controlled NC axes: 14 Machining length: 7,500 mm Max. traverse speed X / Y / Z: 60 / 60 / 30 m/min A-axis rotation: ±110°, continuous C-axis rotation: ±220°, continuous Tool holder: HSK-63F Tool dimensions (milling cutter/drill, max. diameter/length): Ø 50 mm / 200 mm Tool dimensions (disc milling cutter, max. diameter): Ø 500 mm Speed range: 1 - 24,000 rpm Milling motor power: 16 kW Number of tool magazine slots: 16 Number of special tool slots: 2 Automatic clamping jaw positioning: Yes Number of clamping jaws: 8 Profile system with quick-change system: Yes Machining features Max. cross-section WxH / length for single bar machining: 400 x 300 mm / 7,500 mm Min. cross-section WxH / length for single bar machining: 30 x 30 mm / 300 mm Movement: Tool Max. number of profiles per machine loading: Up to 8 profiles (depending on individual bar length) Number of fixed profile stops: 2 Automatic clamping jaw relocation during 2 machining steps: Yes Steel processing (up to 5 mm wall thickness): Yes Knedpfjx Azt Isx Apmja Electronics / Software equipment Machine PC processor: Yes Control panel with display and keyboard: 19" touch TFT color display Machine operation based on Windows®, menu-driven: Yes Custom programming without NC/CNC knowledge: Yes Schüco CAM installable on office PC (machining visualization): Yes MACHINE DETAILS Dimensions: 15 x 4 x 5.5 m Weight: 12 t Operating hours: 20,616 h Spindle hours: 5,387 h

Year of construction: 2009, operating hours: 5,387 h, condition: ready for operation (used), functionality: fully functional, overall weight: 12,000 kg, total length: 15,000 mm, rotational speed (max.): 24,000 rpm, working length: 7,500 mm, Functions: Sawing, notching, milling, drilling, thread tapping, lock case machining TECHNICAL DETAILS Number of controlled NC axes: 14 Machining length: 7,500 mm Max. traverse speed X / Y / Z: 60 / 60 / 30 m/min A-axis rotation: ±110°, continuous C-axis rotation: ±220°, continuous Tool holder: HSK-63F Tool dimensions (milling cutter/drill, max. diameter/length): Ø 50 mm / 200 mm Tool dimensions (disc milling cutter, max. diameter): Ø 500 mm Speed range: 1 - 24,000 rpm Milling motor power: 16 kW Number of tool magazine slots: 16 Number of special tool slots: 2 Automatic clamping jaw positioning: Yes Number of clamping jaws: 8 Profile system with quick-change system: Yes Machining features Max. cross-section WxH / length for single bar machining: 400 x 300 mm / 7,500 mm Min. cross-section WxH / length for single bar machining: 30 x 30 mm / 300 mm Movement: Tool Max. number of profiles per machine loading: Up to 8 profiles (depending on individual bar length) Number of fixed profile stops: 2 Knjdpfx Apoyhf R Nemsa Automatic clamping jaw relocation during 2 machining steps: Yes Steel processing (up to 5 mm wall thickness): Yes Electronics / Software equipment Machine PC processor: Yes Control panel with display and keyboard: 19" touch TFT color display Machine operation based on Windows®, menu-driven: Yes Custom programming without NC/CNC knowledge: Yes Schüco CAM installable on office PC (machining visualization): Yes MACHINE DETAILS Dimensions: 15 x 4 x 5.5 m Weight: 12 t Operating hours: 20,616 h Spindle hours: 5,387 h

Year of construction: 2009, operating hours: 5,387 h, condition: ready for operation (used), functionality: fully functional, overall weight: 12,000 kg, total length: 15,000 mm, rotational speed (max.): 24,000 rpm, working length: 7,500 mm, Functions: Sawing, notching, milling, drilling, thread tapping, lock case machining TECHNICAL DETAILS Number of controlled NC axes: 14 Machining length: 7,500 mm Max. traverse speed X / Y / Z: 60 / 60 / 30 m/min A-axis rotation: ±110°, continuous C-axis rotation: ±220°, continuous Tool holder: HSK-63F Tool dimensions (milling cutter/drill, max. diameter/length): Ø 50 mm / 200 mm Tool dimensions (disc milling cutter, max. diameter): Ø 500 mm Speed range: 1 - 24,000 rpm Milling motor power: 16 kW Number of tool magazine slots: 16 Number of special tool slots: 2 Automatic clamping jaw positioning: Yes Number of clamping jaws: 8 Knedpfx Apex U Thkjmja Profile system with quick-change system: Yes Machining features Max. cross-section WxH / length for single bar machining: 400 x 300 mm / 7,500 mm Min. cross-section WxH / length for single bar machining: 30 x 30 mm / 300 mm Movement: Tool Max. number of profiles per machine loading: Up to 8 profiles (depending on individual bar length) Number of fixed profile stops: 2 Automatic clamping jaw relocation during 2 machining steps: Yes Steel processing (up to 5 mm wall thickness): Yes Electronics / Software equipment Machine PC processor: Yes Control panel with display and keyboard: 19" touch TFT color display Machine operation based on Windows®, menu-driven: Yes Custom programming without NC/CNC knowledge: Yes Schüco CAM installable on office PC (machining visualization): Yes MACHINE DETAILS Dimensions: 15 x 4 x 5.5 m Weight: 12 t Operating hours: 20,616 h Spindle hours: 5,387 h

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 15360599, spindle speed (max.): 2,800 rpm, travel distance X-axis: 600 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 383 mm, disc diameter: 300 mm, TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 350 mm Z-axis travel: 383 mm Kodpfoxnwm Ujx Apmsna Maximum grinding area: 600 x 350 mm Standard magnetic table size: 600 x 350 mm Grinding wheel diameter: 300 mm Spindle speed: 2,800 rpm Clamping surface: 820 × 350 mm Maximum table load: 400 kg Table speed: 0.005–35 m/min Rapid traverse (cross and vertical movement): 4,000 mm/min MACHINE DETAILS Control system: Siemens Electrical Data Operating voltage: 400 V, 3-phase Mains frequency: 50 Hz Machine weight: 2,200 kg EQUIPMENT - Coolant system - Automatic grinding wheel dresser

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, shaft diameter: 100 mm, bending force (max.): 28 t, stroke length: 200 mm, Equipment: CE marking, documentation/manual, TECHNICAL DETAILS Capacity: 90 mm Shaft diameter: 100 mm Usable shaft length: 280 mm Roller speed: 4.6 rpm Bending force: 280 kN Stroke: 200 mm MACHINE DETAILS Control: Conventional Motor power: 12.5 kW Dimensions (L x W x H): 1,600 mm x 1,600 mm x 1,800 mm Weight: 2,800 kg Ksdpfx Apexmgw Temona EQUIPMENT CE marking Documentation

Condition: new, functionality: fully functional, Year of construction: 2024, shaft diameter: 50 mm, roller diameter: 155 mm, overall weight: 400 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, Equipment: documentation/manual, emergency stop, Brand: Sahinler Model: PK 35 Year of manufacture: 2024, unused Capacity (kW): 1.5 Voltage: 400 Frequency (Hz): 50 Dimensions LxWxH (mm): 1000 x 750 x 1400 Weight (kg) approx.: 400 Knsdpfswt Sy Asx Apmsa Units in stock: 4 Manufactured in: Turkey Ø Diameter (mm): 50 Comments: Unused machines at competitive prices, multiple units in stock, foot pedal included.

Condition: used, Year of construction: 1995, Technical details: grinding length: 1250 mm grinding width: 600 mm workpiece height: 730 mm table surface area: 1720 x 500 mm headstock: dist. table - spindle center: 900 mm max. longitudinal movement: X-1450 feed range: 10 - 20.000 mm/min vertical movement: Y-730 mm feed range: 0,2 - 3.000 mm/min cross travel: Z-550 mm feed range: 5 - 5.000 mm/min power capacity: 1500 U/min.- 44 kW / 8000 U/min. - 38 kW kW grinding wheel turining speeds: 50-6.000 U/min cutting speed: max. 80 m/sec. weight of the machine ca.: 11 t Knsdpfxjx Uzvpe Apmja with CNC SIEMENS 840 C auto. dynamic balncing system integrated in the grinding conus profile grinding unit ( on table mounted ) Diamant profile rollers ( dia. max 140 mm , width max. 200 mm, hole 52 H3 ) speed 3000 rpm two magnetic plates ( 1000 x 400 mm, 1200 x 350 mm ) divers Flanges ect. *

Condition: like new (used), Year of construction: 2017, functionality: fully functional, operating hours: 2,600 h, controller model: Fanuc 32 C, control type: CNC control, Equipment: documentation/manual, Standard programs such as parameter settings Dressing settings Speed settings Program management settings Limitation of travel distances x + y Basic parameter settings Grinding wheel management program Warming-up cycle program Surface plunge grinding program Measuring program 15 kVA transformer Full enclosure Meister G3 Spindle upgrade to 3.7 kW, disc 225 mm ETHER interface for network connection Control module with extended memory Fanuc Macro B option Program creation for batch programs Programmable spindle speed Kjdpfx Aew I Tt Sspmsna WinWop program for contour creation (Windows) WINWop program for error compensation WinWop postprocessor CGS Complete Grinding Solutions software Option Dressing Swiveling profile dressing device Diamond dressing wheel Pre-dressing device VPA 100 L Diamond wheel 100 mm for pre-dressing device Regrinding package diamond wheel G3 / W Option – Clamping and Balancing Magnetic chuck 400 x 200 400 mm stop bar with prism Fully automatic balancing device, size 1 Grinding wheel flange for G3, bore 51 mm Option Filter Systems Belt filter system 175 l Extraction unit for emulsion mist 500 Inquiries only from Europe, preferably the EU.

Condition: used, functionality: fully functional, P Macchine 03P – Industrial Machine (Year 2002) Manufacturer: P Macchine s.r.l. Model: 03P Year of manufacture: 2002 Serial number: 03P0100071 Location: Finland Country of origin: Italy CE marked: Yes Description P Macchine 03P is a robust Italian-made industrial machine designed for professional use. The machine is CE certified and suitable for continuous production. Its solid construction and straightforward technology ensure reliable operation and easy maintenance. Technical specifications Voltage: 220–240 V Phase: 1~ (single-phase) Frequency: 50–60 Hz Power: 0.75 kW × 3 Current: 7 A Spindle speed: 12,000 rpm Operating air pressure: 6–7 bar Air consumption: 2 Nl/s Kjdpfx Aox Rvmuopmena Weight: 290 kg Additional information Test run possible by appointment Buyer is responsible for loading, transport, customs and all related costs All details to be verified with the seller prior to purchase 📩 Contact us for price, additional photos and further information

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, rotational speed (max.): 8,000 rpm, shaft length: 145 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Router unit Number of motors: 1 Shaft length: 145 mm Knedpfx Apoxxar Uemja Motor power: 4 kW Speed: 8,000 rpm MACHINE DETAILS Installed total power: 5 kW Motor power: 3 kW

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,000 mm, total length: 1,100 mm, total height: 550 mm, input voltage: 220 V, working width: 600 mm, infeed width: 650 mm, spindle motor power: 1,100 W, warranty duration: 24 months, power: 1.2 kW (1.63 HP), Equipment: CE marking, emergency stop, type plate available, DESTEK MAKİNE is the first and only company to establish a production facility in its field in Türkiye. All machines and hand tools we sell are produced in our own workshops using state-of-the-art CNC machinery from design to final product. With the strength we gain from production, we have been providing products and services to our valued customers in the standing seam roof & facade cladding sector for over 10 years. By conducting a thorough needs analysis with a customer-first approach, we bring all global technological innovations to our country simultaneously. Therefore, our vision can be summarized as: “ Whatever is Manufactured in the World, DESTEK MAKİNE can Produce the Same or Even Better ” With a solution-oriented engineering approach, an experienced team of experts in the field, and a reliable service network, we are here whenever you need us. Our company guarantees 100% customer satisfaction. Our commitment to quality is certified by: CE Conformity Certificate ISO 9001 ISO 14001 ISO 10002 ISO 45001 Every manufactured "DESTEK" standing seam machines goes through delicate tests. "DESTEK" Features - Standard standing seam height 25 mm Knodpfx Apewzzlwomoa - There is no problem of oil canning when working with the machine. - Automatic Cutting Guillotine (Standart) - Ribbing Attachments (Standart) - Dijital Counter (Standart) - Cabled Remote Controller (Standart) - Emergency Stop Button (Standart) - Forward and backward button (Standart) - Wrench Sets that will be required during use (Standart) - Weight: 260 kg - You can transport with small cars - You can lift it to the roof easily - You can seperate it to four pieces for carrying easily (Standart) - Material width adjusment (180 mm – 650 mm) (Standart) Please contact us for more information and prices.

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, actuation type: hydraulic, Complete production line for drywall metal profiles (CD/UD/CW50/UW50) for sale, ideal for anyone looking to start or expand a profitable business in the construction materials industry. ✔ Strong and reliable machines ✔ Efficient and continuous production ✔ Easy to operate ✔ Perfect for producing your own products or supplying construction material distributors The production line is in very good working condition, well maintained, and can be tested on site. This is an excellent opportunity for entrepreneurs or companies who want to enter the drywall profile market without investing in expensive new equipment. Knedpfsyv R N Uex Apmsa Selling due to business reorganization. 📞 For more details, price, photos, or videos of the machines in operation, please contact me by phone or message.

Year of construction: 2000, condition: good (used), Weight: 4600 kg Dimensions LBH: 4350 x 1070 x 2690 mm Saw blade dimensions: 8250 x 54 x 1.6 mm Fright basis: EXW with disassembling Price: on demand Ksdpfx Ajhkhumjpmjna The 2000 Kaltenbach KBS 1001 DG band saw is a semi-automatic, high-performance band saw for cutting and drilling profiles. The Kaltenbach band saw has a two-metal saw blade M42 measuring 8250 mm x 54 mm x 1.6 mm. The motor of the saw is frequency controlled and has a driving power of 7.5 kW. The cutting speed is continuously adjustable between 16 - 100 m / min. -Working height is 450 mm, working width 1000mm. -drill diameter:10- 40 mm -material dimension max: 1000mmx450mm -material dimension min:65mmx65mm -3 drilling axes, one vertical and one horizontal -drill feed rate of 20-200mm/min -5 tool changer position per axis with an iso 40 tool holder The machine can transmit data in different ways: 1. The operator is programmed directly on the control panel. 2. The data is entered into the job preparation via computer and then imported as a CSV file. Data transfer takes place via a floppy disk or network. 3. Data are entered using CAD programs. DSTV data is imported via a floppy disk or network.

Condition: excellent (used), Year of construction: 2024, operating hours: 193 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 340 mm, cutting width (max.): 335 mm, workpiece length (max.): 6,000 mm, milling spindle speed (max.): 6,000 rpm, section length (max.): 6,000 mm, TECHNICAL DETAILS - Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control: eluCAM graphical, Windows XP user interface Workstations: 2 independently operating stations Turret tool changer: 8 tools, servo motor driven Tool holder: BT 30 Disc mill diameter: 180 mm Tool length: 150 mm (from point of attachment) Travel distances Travel X-axis: 7,200 mm (without end-face processing), 7,080 mm (with end-face processing) Travel Y-axis: 480 mm Travel Z-axis: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-/Z-axis: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min Electric connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT two independent workstations with light barrier and camera system Non-swiveling inclined milling head for 2 tools, Er20A, up to 18,000 rpm Inclined milling head swiveling 4 × 90°, Er20, up to 22,000 rpm Inclined milling head non-swiveling for steel, Er20A, 1,554 rpm Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts Carbide saw blade Z=100, D=300 mm, cutting width 3.2 mm Tool holder i=1:3.86 for 18,000 min⁻¹, ER25 Cooling/lubricating unit for steel processing Disc milling holder BT30, D=16 mm Disc cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL DETAILS - Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable 90° and 45° inside, intermediate angles and 22.5° acute manually adjustable with digital display Cutting angle (tilt): pneumatically adjustable 90° and 45° inside Kedpfswprmzox Apmsna Saw direction: saw blades move from bottom to top Control Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic locking Operating system: Windows Saw unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 HP) Saw blade cooling: available Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electric connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT Automatically closing protective covers Electronic positioning of the heads with +/- 0.1 mm/m accuracy Digital angle display for manually adjustable special angles Pneumatically adjustable saw blade rotational and tilt angles Operation via Windows control with 8.4" display and handwheel Cooling system for saw blades included Saw unit with bottom feed for optimal cutting force

Year of construction: 1989, condition: excellent (used), Model: ST-10 Kedpfsfl Dtpjx Apmsna TABLE DIMENSIONS: 1000 x 800 mm TABLE HEIGHT: 840 mm

Condition: good (used), Year of construction: 1994, CNC Spiral bending machine, capacity 50cm3, min-max diam of coil 500-3.500mm. Knedpfx Aoiu Acpjpmoa

Condition: used, Year of construction: 1992, spindle diameter: 50 mm, milling spindle length: 545 mm, Longitudinal profile milling machine with lifting spindle 545mm long, diameter of lifting spindle D=50mm, motor 5.5kW. Glazing bead saw D=180mm, 2,2kW. Feed rate 2-4-6-12m/min Knedsua Swwjpfx Apmsa

Condition: used, Year of construction: 1976, Profile bending machine IRLE - B 160 HH Knsdpeytn E Tofx Apmoa Technical data on photo

Condition: new, Year of construction: 2025, functionality: fully functional, The DMS 2KR was developed specifically for deburring components after laser or saw cutting, based on Flex Trim flap wheel systems. The DMS 2KR machine features two independent units, each controlled by separate frequency inverters. A dedicated support base allows for very fast deburring of the ends of processed parts, such as tubes and profiles of various shapes. The installed columns enable quick and precise adjustment across multiple axes. Electronic speed and rotational direction control allow for optimal processing parameters to be set. The machine is entirely manufactured in Poland by our company, drawing on extensive experience in grinding processes. TECHNICAL SPECIFICATIONS: Knedpsxhdcpofx Apmja - Adjustable height - Power: 0.55 kW - Speed controlled by frequency inverter - Two motors - Disc heads - Dust extraction guards included - Base for easy operation - Weight: approx. 140 kg - Dimensions: 1200 x 750 x 1400 mm (W x L x H) ADVANTAGES OF THE DMS 2KR: - Easy installation - User-friendly operation - Delivers excellent, uniform grinding results

Condition: like new (used), functionality: fully functional, Year of construction: 2019, Sahindler - Scantool profile bending machine Model PV 60 NC Year 2019 - New / Demo Roll diameter : 215 mm. Capacity flat iron : 120 x 25 mm. Capacity flat iron on edge : 80 x 20 mm. Capacity angle iron: 70 x 7 mm. Knedpfxoytb U Us Apmoa NC control 1 set profile bending rolls Hydraulic top roll movement Bending support Footpedal

Condition: excellent (used), METALLKRAFT Profile Steel Shear / Punch HPS 65 DS Combined Hydraulic Profile Steel Shear and Punch with Punching Station, Notching Station, and Flat Steel, Angle Steel, and Profile Steel Shear – enables simultaneous operation at punching and profile steel shear. Punching Station - Punching Force: 65 t - Punching Capacity: max. Ø 26 x 20 / Ø 57 x 10 mm* - Throat Depth: 305 mm - Stroke Length: max. 55 mm - Number of Strokes: 25 strokes/min - Working Height: 900 mm Rod Steel Shear - Cutting Capacity Round: max. Ø 45 mm* - Cutting Capacity Square: max. 45 x 45 mm* Angle Steel Shear - Cutting Capacity L-Profile 90°: 120 x 120 x 12 mm* - Cutting Capacity L-Profile 45°: 70 x 10 mm* - Cutting Capacity U/I Profile: 120 x 58 mm - Cutting Capacity T-Profile: 90 x 11 mm - Working Height: 1,140 mm Flat Steel Shear - Cutting Capacity 90°: max. 300 x 20 / 375 x 15 mm* - Miter Cut 45°: max. FL 100 x 15 mm* - Blade Length: 380 mm - Working Height: 900 mm Notching Station - Material Thickness: max. 10 mm* - Notching Width: max. 45 mm - Notching Depth: max. 90 mm - Notching Station: 100 x 100 x 10 mm Machine Data - Motor Power: 5.5 kW | 400 V - 50 Hz - Dimensions (LxWxH): 1700 x 950 x 1880 mm - Weight (net): approx. 1,600 kg Shipping on pallet via freight forwarder possible Europe-wide. Additional machines available! Take a look at our listings. If you have any questions, feel free to contact us by message or phone: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Kedpfx Apsxizanomena

Condition: excellent (used), Year of construction: 1994, Technical Data: - 2 hydraulically adjustable rolls - 3 driven rolls Knsdpjyurwvjfx Apmea - Main motor power: 5.5 kW - Machine can operate horizontally or vertically - Drive shaft diameter: 105 mm - Standard attachment roll diameter: 275 mm - Working speed: 0 – 7 m/min - Digital display Bending Capacities: - Flat steel: 100 x 25 mm - Angle steel: min. 100 x 100 x 12 mm - T-profile: min. 120 x 120 x 13 mm - Round steel: 70 mm - Round pipes: 100 mm - Square tubes: 90 x 90 x 5 mm - CE marking - Dimensions (L x W x H): approx. 1600 x 1500 x 1500 mm - Weight: approx. 3 t Condition: Very good condition Accessories: Various tools The seller is not liable for typing or data transmission errors. The machine is in appearance, technology, and wear consistent with its age; used machines are sold without any guarantee.