Used Processing Machine for sale (69,147)

Condition: used, Microcutter FD 112 Karl Schnell Stainless steel Dimensions: 1150x1200x1700mm Voltage: 400V / 50Hz / 3N Up to 3500kg/h Bedjwtg Emepfx Abbjwh Electric power: 51kW

Condition: new, PRICE: 320 EUR Bwedsvt Aicopfx Abbjh Cutter cart Made of stainless steel Dimensions: 600x600x500mm Volume: 200 liters

Condition: used, We offer the Inject Star P60 separator – an industrial machine for advanced meat recovery (AMR), designed for meat and poultry processing plants and factories that want to maximize the use of raw materials and reduce production losses. The P60 separator works on the basis of a hydraulic press with a crushing chamber, which separates meat from bones and hard tissues and then presses it through a perforated filter. How does the Inject Star P60 separator work? In a special feeding device, the bones are fed into the pressing chamber and pre-compacted. Then, a linear hydraulic system separates the advanced meat from the bones and pushes it through a perforated filter (standard 8 mm). This results in high-quality meat mass while maintaining low calcium content and minimal temperature increase during the process, which has a positive effect on the quality and functionality of the final product. The AMR Inject Star system enables the recovery of up to approx. 35% of meat from red bones, with low wear on consumables and relatively low running costs. Technical data: Manufacturer: Inject Star Model: P60 Power supply: 400 V, 3Ph, N Installed power: 18 kW Bjdpfeycc H Rjx Abbewh Capacity: 900 kg/h Capacity with bone breaker: 1500 kg/h Process type: hydraulic pressing system with perforated filter (8 mm, optionally 2 mm) Dimensions (L x W x H): 4900 x 1900 x 2900 mm Weight: approx. 4100 kg Advantages of the Inject Star P60 separator High meat recovery from bones – up to approx. 35% of high-quality meat can be recovered from red bones, which significantly increases the profitability of the raw material. Low calcium content – the end product is characterized by a low calcium level (< 1,000 mg/kg) thanks to the use of a precision pressing chamber and perforated filters. Minimal temperature increase – the separation process causes only a slight increase in meat temperature, which has a positive effect on color, structure, and technological properties. Low operating costs – the low-wear design and low maintenance requirements reduce running costs and the risk of expensive downtime. Possibility of line expansion – according to the manufacturer’s offer, the separator can work with a bone crusher as a preliminary stage and with additional soft tissue separators, as well as various loading systems.

Condition: like new (used), functionality: fully functional, KILIA Angle Automatic Grinder E130 / 2000S – Frozen Meat Grinder (factory-refurbished 2026) 200 L hopper | Hydraulic loading | down to –17 °C | 2-speed | PLC control For sale is a KILIA Angle Automatic Grinder E130 mm 2000S, configured as a frozen meat grinder and factory-refurbished in 2026. This machine is in absolutely first-class condition, both technically and cosmetically, and is maintained at a top level – ideal for professional continuous operation. Features & Highlights - Factory-refurbished in 2026 – professionally overhauled and upgraded - Stainless steel construction - 200 L hopper with hydraulic loading system (for 200 L tote bins) - Screw and screw housing: stainless steel - Frozen meat package for operation down to –17 °C, incl. mixing device - Reinforced gearbox (150 / 300 rpm) - 2 speeds for main screw - 2 speeds for feed screw - Electrically interlocked safety grid - Lifting device / loading system Bsdpfx Abjyccnnsbowh - Electrically interlocked discharge protection - PLC control with push-buttons - Integrated control cabinet Drive Data (400 V / 50 Hz) - Main screw: 11 / 15 kW - Feed screw: 1.0 / 1.4 kW

Condition: like new (used), Clipping machine Manufacturer: Technopack Easy and quick closing of artificial and natural casings with the range of caliber from 25 to 75mm. The loops can be fastened automatically or manually. Dimensions:1800x1300x700mm Weight: 130kg Air pressure: 4-6bar Power supply: 230V / 50Hz Bjdpsxtn Sxefx Abbowh

Condition: like new (used), Vacuum machine Manufacturer: Supervac Lid with plexiglass window Bwodpoxru Tgsfx Abbsh On wheels with brakes Microprocessor control with vacuum sensor Integral vacuum pump with motor protection Reliable and easy to service Easy to clean Simple to operate Chamber dimensions: 800x730x250mm Seal lenght: 4x 660mm

Condition: repair required (used), Year of construction: 1994, functionality: limited functionality, machine/vehicle number: 466EIF712N14 / V47Y10D94502002, clamping force: 1,800 kN, Two REP injection molding machines with platen dimensions 510 x 430 mm, clamping force of 180 t, and injection capacity of 670 cm³. The first machine requires piston repair and seal replacement. The second machine is missing the hydraulic pump, pressure control valve, and control program card. Bjdpfxeyb Rw Ue Abbewh

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 41/890, clamping force: 200 kN, Rutil injection molding machine with a platen size of 260 x 240 mm and a clamping force of 20 t, with an injection capacity of 1000 cm³. The machine is in working condition. Bodpfx Asyb Rn Tebbswh

Condition: used, Year of construction: 1986, functionality: fully functional, clamping force: 250 kN, LWB rubber press with a platen size of 300 x 300 mm. The machine is factory-designed as an injection press but was used as a conventional rubber press in a laboratory. Bwodpfxsyb Nd He Abboh

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 571 EIT 9106/1149, clamping force: 2,500 kN, REP S injection moulding machine, platen size 500 x 630 mm, in working condition, with a clamping force of 250 t and an injection capacity of 968 cm³. Bedpfx Ajyb Icbobbowh

Condition: used, Year of construction: 2000, functionality: unexamined, total length: 890 mm, total width: 890 mm, total height: 1,840 mm, input voltage: 400 V, electrical fuse: 150 A, We offer this used Korimat KA160/2.5 autoclave and boiler, year of manufacture 2000. Manufacturer: Korimat Model: KA160 Year of manufacture: 2000 120 litres, -1/2.5 bar Bjdpfeyb Hkkex Abbowh Condition: used Category ID: 665 Type ID: 1732 Machine type: Autoclave and boiler If you have any questions or require further information, please do not hesitate to contact us by message or phone.

Condition: good (used), 1 x Syspal column lifter type 600/scb-1480 for 200 and 300 litre eurobins. Located Wiltshire. UKFM1- 6623 Bodpsvq N Dusfx Abbewh

Condition: good (used), 1 x Syspal column lifter type 600/scb-1481 for 200 and 300 litre eurobins. Located Wiltshire. UKFM1- 6624 Bwsdpfx Aevq N Nwobbsh

Condition: good (used), Year of construction: 2020, 1 x Riggs auto pack 1000 product pump. Y.O.M 2020. Model Number:- TT2716. Located Wiltshire Bedpfx Ajvm U S Njbbswh

Condition: excellent (used), Year of construction: 2022, GEA MULTIFORMER, STICK INSERTER AND COLUMN LOADER 1 x GEA Multiformer Multiformer 400 Year: 2022 1 x GEA Stick Inserter 400 1 x GEA Mobile column loader *Videos available* Located in South Wales, UK Bsdpfsvcc N Uex Abbjwh UKFM2-6602

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Offered is a mixer-angled grinder from manufacturer Mado, type MEW 621 S, year 2023, in like-new condition. The machine operates on 400 volts, 5.5 kW, fully stainless steel, new Unger system 98 mm, factory reconditioned, immediately ready for use. The machine features both mixing and wolf/grinder operation. Further details upon request. Payment in cash or in advance. Bsdpfeya Ii Sox Abbewh Sale only to commercial customers. No warranty or guarantee.

Condition: good (used), functionality: fully functional, saw band length: 1,750 mm, saw band width: 16 mm, Bone Saw Mado MKB 649 16A, 380V. Workshop inspected, defects rectified. Motor brake. New saw band. Inspection and test run possible! Additional machines available. Cash or advance payment! Bwedpfx Aboya H U Tjbsh Sale to businesses only. No warranty or guarantee.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Offered is an angle grinder from manufacturer Mado, model MEW 623, year 1999, in very good condition. The machine operates on 400 volts, 9 kW, is made entirely of stainless steel, and features an Unger 114 cutting system. The machine has two grinder passages. Workshop tested, immediately ready for use. Further information upon request. Payment by cash or advance bank transfer. Bwsdpfxjya H T Ao Abbjh Sale only to commercial customers, no guarantee or warranty.

Condition: good (used), functionality: fully functional, Offered for sale is a Weber derinder, model AS 450, 400V / 16A / 0.4kW. The machine is fully functional and immediately ready for operation. Cutting width approx. 39 cm. New blade installed. Inspection and trial run possible. Six machines available in total. Further details on request. Bsdpfxjya H Hco Abbowh Payment by cash or advance bank transfer. Sale to commercial buyers only, no warranty or guarantee.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, 4-5 axis CNC Still in operation Good maintained condition Numerically controlled cutting, drilling, and milling CNC machining center Comes with a 12-position tool magazine enabling various machining processes HSK 63 F tool holders and additional accessories as shown in the photos are included in the machine price Working axis dimensions: X 3400 x Y 1720 x Z approx. 400 mm Vacuum table dimensions: 3120 x 1200 mm Axes: X, Y, Z + rotation + option to purchase angled heads or additional tools Main motor power: 7.5 kW Working speed: 900 – 18,000 rpm Max tool diameter: 140 mm Bsdovva T Djpfx Abbewh 2 x PC with Windows XP and ROUTOLINK software (second PC is a backup) 2 vacuum pumps Warranty and post-warranty service provided Price includes machine demonstration and operator training Original documentation CE safety standard Year of manufacture: 2001 Overall dimensions: 6865 x 3800 x 2350 mm Weight approx. 6000 kg

Condition: ready for operation (used), functionality: fully functional, The NIJAL PE1P single-track folding machine is an industrial device engineered for mechanical processing of meat products, specifically for folding, guiding, and shaping tasks prior to packaging. Its automated operation ensures consistent handling of pieces while minimizing manual intervention. As a result, both the visual appearance and dimensional uniformity of products remain constant throughout the production run. Firstly, this folding machine operates on a single track, guaranteeing precise product guidance throughout the cycle. This ensures uniform, controlled folding even at high throughput rates, thereby reducing the risks of deformation or misalignment. In addition, the 240 mm product outlet width allows for processing various meat sizes while maintaining excellent product stability. Its compact dimensions (2300 × 1000 × 1300 mm) facilitate easy integration into existing processing lines. This makes it ideally suited for installation upstream of breading, forming, or packaging equipment. Furthermore, its food-grade stainless steel construction meets hygiene standards for the food industry. Smooth surfaces simplify cleaning and help reduce downtime between production batches. The NIJAL PE1P folder is intended exclusively for handling raw, uncooked meat. It only performs mechanical shaping, making it especially suitable for workshops seeking uniform product form before final processing. Its robust build and CE certification ensure reliable, long-lasting operation in demanding industrial environments. Technical specifications: Manufacturer: SAS NIJAL Model / Type: Single-Track Folder PE1P Application: Folding and handling of raw (uncooked) meat Number of tracks: 1 Dimensions (L × W × H): 2300 × 1000 × 1300 mm Product outlet width: 240 mm Bwsdpjyay Ugofx Abbsh Construction material: Food-grade stainless steel Year of manufacture: 2006 Certification: CE Line integration: Upstream of breading, forming, or packaging equipment

Condition: excellent (used), Year of construction: 2013, operating hours: 50 h, functionality: fully functional, Used Urschel M6 Dicer – Precision Slicing, Dicing & Strip Cutting We are pleased to offer this used Urschel M6 Dicer, a highly versatile and reliable machine ideal for processors looking to dice, strip-cut, or slice a wide variety of products with consistency and speed. Key Features: Multi-Purpose Cutting – Ideal for dicing vegetables, fruits, cooked meats and more. Bedpfx Aow Hb R Dobbewh Compact & Efficient – Floor-standing design suitable for medium- to high-capacity production lines. Durable Construction – Stainless steel body and contact parts for hygiene and longevity. Easy to Clean & Maintain – Designed with sanitation and operator efficiency in mind. Adjustable Cut Sizes – Offers a range of cut sizes through quick-change parts (spare parts available upon request). Condition: Good working condition – fully tested and inspected in our workshop. Ready to go straight into production.

Condition: new, Year of construction: 2025, operating hours: 8 h, total length: 2,000 mm, total width: 3,000 mm, total height: 3,000 mm, overall weight: 1,000 kg, type of input current: three-phase, power: 2.5 kW (3.40 HP), pressure: 3 bar, compressed air connection: 3 bar, input frequency: 50 Hz, The hardware complex is designed to form portions of minced meat by volume - 8 portions of 1 kg + up to 100 g and feed them into molds made on a thermoforming machine. - Productivity of the machine unit: a) up to 8 cycles / min for minced pork; b) up to 8-5.4 cycles / minute on average, depending on the content of beef fat in minced meat. Total electrical power consumption - 2.5 kW. included: 1.Filler 2.Tipper option 2 position empty product Height ~ 700mm and ~1900mm 3.Screw conveyor Multivac is not included - MULTIVAC R515 bottom film - 140 microns Top film - 60 microns. Pack size - 135 x 175mm, block size 4x2 - 375 x 585 mm Length x width x height 2000.0 × 3000.0 × 2000.0 This will make it easier to work in production. Bwodpfx Ajv R Ttajbbjh This will increase the production capacity of minced meat.

Condition: good (used), Year of construction: 2007, DADAUX SLICO 700 Cutlet Slicer • Control panel protected with a cover against water ingress. • Textured loading surface prevents excessive friction of products intended for cutting. • Fully constructed from INOX 1810 • Hinged doors • 1 speed: 160 cuts/min • Adjustable cutting thickness from 0 to 40 mm • Electric feed system Bjdpexx Tbpjfx Abbewh • Stepwise feed system • Cutting thickness adjustable during operation • Automatic pusher return • Suitable for high-pressure washing • CE compliant

Condition: excellent (used), Year of construction: 2013, operating hours: 820 h, total length: 3,158 mm, total width: 890 mm, construction width: 1,103 mm, I have several Fam Mantis machines for sale – slicers with low operating hours and a capacity of over 4 tons per hour. Each machine comes with a head. The listed price is net and applies to one Mantis unit. Bedpfx Abjwyczwobewh