Used Printbind Kb 2000 for sale (7,551)

Condition: new, plate width 2000 mm plate depth 4000 mm plate height 300 mm weight 5195 kg Clamping plates - T-slot plates - plate field 4000 x 2000 x 260 mm If you have not found the size you are looking for, you can also send us an e-mail with the completed PDF form. With this we can a custom made panel for you. edge distance: 240mm groove spacing: 230mm Groove size: 22mm Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/III The cover picture is for orientation only and does not represent a true-to- Gbjdpfjyq S Exsx Af Uei scale image of the plate.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, Lathe – cycle-controlled | Brand: SEIGER | Type: SLZ 2000 Year of manufacture: 2011 The machine can be inspected by appointment. Condition: Fully functional / ready for operation. Operating hours (February 2026): approx. 15.289 h TECHNICAL DATA Working area: - Center distance: 4.000 mm - Swing diameter over bed rail: 2.000 mm - Swing diameter over cross slide guide: 1.400 mm - Cross slide travel: 760 mm - Bed width: 1.350 mm Turning tool: cross-section (height x width) 40 x 40 mm Turning spindle: - Spindle diameter in front bearing: 300 mm - Spindle bore: 120 mm Main drive AC: - Drive power 100% / 60% duty cycle: 54 / 70 kW - Max. torque at the spindle: approx. 18.000 Nm - Speed range: 3 - 450 rpm Tailstock: - Quill diameter: 320 mm Permissible workpiece masses: - Between centres without steady rest: 18 tons Weights: - Machine: 24 tons Space requirements/dimensions (Length x Widt x Height): - Machine without cladding: 10,5 x 4,2 x 2,8 m Electrical: - Supply voltage / rated frequency: 400 V, 50 Hz - Power consumption main drive: 54 kW EQUIPMENT / ACCESSORIES: - Control system: SINUMERIK 840D pl Gsdpfx Aoyq Rwtsf Usbi - 2 x chip conveyors - Documentation - CE marking No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: used, mileage: 220,000 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 07/2016, emission class: euro6, color: white, number of seats: 23, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, Special Equipment: Passenger side airbag, hill start assist, 13-pin trailer socket, antenna for GSM, GPS, and UMTS networks, Audio 10 audio system (radio with CD player), outside temperature indicator, single-pole battery isolator switch, roof control panel with reading light for driver/passenger side, roof lining, entry lights, driver assistance system: collision warning system with brake function (Collision Prevention Assist), digital tachograph with download capability, windows for rear doors, privacy glass for rear door windows, fixed window in loading/chassis area, front left, fixed window in loading/chassis area, front right, flip cover for storage compartment, fuel filter with water separator, steering wheel (mechanically adjustable steering column), programmable special module, acoustic reverse warning system (external warning signal), interior rear-view mirror, right-hand side electric sliding door, rear mudguards, front mudguards, seat equipment: comfort headrest, passenger seat; seat equipment: comfort headrest, driver seat; Cab seats: heated driver's seat, cab seats: comfort suspension seat, driver's side, reinforced rear stabilizer, reinforced front stabilizer, tank sender for auxiliary heater, window pillar trim, standard trim in loading/chassis area, fleece battery 95 Ah, preparation for auxiliary heat exchanger, cab thermal insulation, heat-insulating glazing (windscreen with top band filter), auxiliary heater (air) electric, auxiliary heater (hot water). Further equipment: Gbjdpfx Aeytlbxjf Usi Third brake light, adaptive brake light, driver's side airbag, washer fluid level indicator, exterior mirrors electrically adjustable and heated, both sides, exterior mirrors with integrated turn signal, brake assist, braking system with ABS+ASR, roof lining in cab, driver assistance system: lane keeping assist, lockable glove compartment, rear doors (opening angle 180 degrees), body/superstructure: high-roof panel van standard, child safety lock, main fuel tank 75 liters, continuous partition in cargo area, load securing / lashing points, headlight range adjustment, model facelift, engine 2.1 liters - 120 kW CDI CAT, wheelbase 4325 mm, smoker's package, tire repair kit with compressor, low emissions according to Euro 6 emission standard, sliding door right in cargo/passenger compartment, seat belt system with warning device (driver’s side), seat upholstery: 'Lima' fabric, cab seats: adjustable passenger seat, Assyst maintenance interval indicator, permissible total weight 5.00 t, twin tires on 2nd axle/rear axle.

Condition: excellent (used), CATALOG NUMBER 7910 TECHNICAL DATA - Max. working width: 1350mm - Max. working height: 150mm – From above: - Rubber pressure roller I unit (metal grooved roller for calibration) II unit (two smooth metal rollers + sequential sanding pad) - Rubber pressure roller - Cleaning brush – From below: - Infeed roller, metal - Feed belt - Outfeed roller, metal, slip type - Pneumatic belt oscillation with photocell control - Electric table lifting - 2 feed speeds: 2–14m/min - Main motor: 5.5/15 kW - Brake - Grinding height potentiometer - Feed motor: 0.75kW - Working pressure: 8 bar - Extraction nozzle diameter: 200mm, 120mm - Dimensions (L/W/H): 1860x2200x1980mm - Weight: 1995kg ADVANTAGES – German-made – Unpainted – DTR technical documentation included – Used sander, in very good condition Net price: 38,900 PLN Godpfx Asyquzcef Uobi Net price: 9,260 EUR based on 4.2 EUR rate (Prices may change with significant rate fluctuations)

Condition: good (used), Year of construction: 2022, I sell the automatic pneumatic end cutting saw Salvamac Salvapush 2000, year 2022. Input table automatic feeding 6,10m (pusher system) Outut table 3,00m Total length: 10,50m Optimising with mistakes deffect reading and automatic cutting sequence modes. Gbjdpfxsvxbmws Af Uoi Available immediately. CE version. Documentation included.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-2000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Gedpfx Aethit Eef Uobi Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, Year of construction: 2024, Handheld laser welder LWH-2000-N Relfar FWH20-S10A The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including the laser head holder) 630x1300x1500 mm Price included One-day training along with machine installatio - 1 day up to 8 hours – machine installation and operational training. Relfar FWH20-S10A laser head - Welding, cutting and cleaning Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual plasma cutter. Gedpfx Afsh H Ngte Ujbi Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Gbjdpfx Afethittj Uei Manual laser cleaner 2000W LCH-2000-N Laser cleaner is an innovative device for efficient and precision cleaning of surfaces. It operates by focusing the laser beam on contaminants, causing them to evaporate or break down. Laser cleaners are used in various industries from automotive to preservation of monuments. It is characterized by high efficiency, minimal waste and reduced penetration of the cleaned surface. Compared to traditional cleaning methods, the laser cleaner can be more precise and cost effective. Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. Available to choose from MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Raycus Wuhan Raycus Fiber Laser was founded in 2007. The company has opted for independent research and development based on mergers with other companies, and is involved in the manufacture of laser sources for a wide range of applications including cutting, welding, soldering, marking and engraving. The brand’s equipment is used in automotive, aerospace, medical, electrical and advertising industries.

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, sheet thickness (max.): 10 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Godpfx Aoytftuef Uobi Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2620, spindle bore: 103 mm, turning diameter: 630 mm, turning length: 2,000 mm, total length: 4,000 mm, total width: 1,500 mm, total height: 1,700 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 18 rpm, Leadscrew and feedscrew lathe MEXPOL TUB 630 B x 2000 • Manufacturer MEXPOL Machine Tools • Type / Model TUB 630 B x 2000 Heavy-duty conventional leadscrew and feedscrew lathe in robust industrial design. Year of manufacture: 2008. Equipment as per nameplate and documentation: • 3-jaw chuck Ø 500 mm • Spindle mount DIN 55027 / 11 • Spindle bore 103 mm • Speed range 18 – 2,000 rpm (3 steps) Gedpfx Ajytc Agof Uebi • Bed width 520 mm • Hardened guideways • Central lubrication • Coolant system • Quick-change toolpost (Multifix system, size C) • Taper turning attachment • Tailstock • Digital speed display • 400 V / 50 Hz / 3 phases • Drive power 15 kW Total weight as per nameplate: 4,570 kg Condition: Used, commensurate with age; normal workshop wear. Last machine operation was recent. Functional check recommended. Centre distance: 2,000 mm Spindle bore: 103 mm Max. chuck diameter: 500 mm Motor power: 15 kW Connection: 400 V / 50 Hz Total weight: 4,570 kg Machine dimensions approx.: 4,000 x 1,500 x 1,700 mm

Condition: new, Year of construction: 2026, operating hours: 306,311 h, machine/vehicle number: SČO2000, The machine is intended for scalding and dehairing of bristles from pigs. Time needed for scalding and deharing: 3 minutes Compact, stable machine housing made from Stainless steel Controls and ejector arm on the left Electric heating Pigled and Big Pigs versions available On the models 2000 and 2200, water outlet on bouth sides of the machine On the model 1100 , water outlet on the right side of the machine On the front of all machines, an opening for bristle removal. Dimensions: 2570 x 1040 x 1340 mm, weight:725 kg, 14,2 kW,400V For Pigs up to 2000 mm long and weighing up to 280 kg, Tyo SČO 2200 Gbjdpfx Afspuy Agj Uoi for Pigs up to 2200 mm long and weighing up to 350 kg.

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 2,000 kg, lifting height: 1,600 mm, load center: 600 mm, mast type: simplex, fork length: 1,150 mm, tire condition: 100 %, front tire type: polyurethane tires (non-marking), empty load weight: 250 kg, total height: 2,030 mm, total length: 1,642 mm, total width: 740 mm, color: yellow, Equipment: pallet forks, A mast trolley with a lifting capacity of 2000 kg is a versatile device used for unloading delivery vehicles as well as for work in warehouses and shops. Its solid construction ensures long service life, while the polyurethane wheels provide quiet and trouble-free operation. Technical Specifications Load capacity: 2000 kg Lifting range: 85–1600 mm Fork length: 1150 mm Godpfxeytcmrj Af Usbi Mast type: single mast Overall height: 2030 mm Height with forks raised: 2030 mm Overall length: 1642 mm Fork outer width: 550 mm Overall width: 740 mm Net weight: 250 kg Number of wheels (front/rear): 2 / 2 Wheel and roller material: polyurethane Steering wheel dimensions: 180 × 50 mm Roller dimensions: 75 × 70 mm Load center: 600 mm Fork width: 160 mm Fork height: 60 mm Fork inner width: 390 mm Adjustable fork spacing: Yes Delivery to the customer is possible. The delivery cost is determined individually according to the carrier’s quotation. Should you be interested in other machines please visit our website.

Condition: used, mileage: 241,000 km, power: 235 kW (319.51 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 5,550 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 9,750 mm, total width: 2,550 mm, total height: 3,750 mm, loading space length: 7,600 mm, loading space width: 2,480 mm, loading space height: 2,480 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, tail-lift, traction control, General information Year of manufacture: 2023 Technical information Number of cylinders: 5 Engine capacity: 9.291 cc Front axle: Steering; Tyre profile left: 90%; Tyre profile right: 90%; Suspension: leaf suspension Rear axle: Double wheels; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50%; Suspension: air suspension Weights Empty weight: 10.020 kg Carrying capacity: 9.480 kg GVW: 19.500 kg Functional Make of bodywork: 1x bed Maintenance APK (MOT): tested until 09/2026 Financial information Price: On request Gedpjytccyjfx Af Usbi Other information Cargo space outer length: 760 cm Cargo space outer width: 248 cm Cargo space outer height: 248 cm Dhollandia 2.000 kg

Condition: excellent (used), Year of construction: 2011, TruLaser 5040 Twin Pack! Technical Specifications: Machine: 2D laser machine in tandem configuration CNC control: SIEMENS 840D Laser type: CO2 Working area: 4000 x 2000 x 115 mm Laser power: 6 kW Cutting capacity steel: 25 mm Cutting capacity stainless steel: 20 mm Cutting capacity aluminium: 12 mm Max. workpiece weight: 1250 kg Automatic pallet changer CE marking Electrical equipment for three-phase current: 400 V / 50 Hz Dimensions (L x W x H): approx. 12,000 x 5,300 x 2,600 mm Weight: approx. 15 t Additional Features: No need to change cutting heads – one cutting head for all sheet thicknesses Laser power up to 7 kW, sheet thickness up to 30 mm TFT colour display Longitudinal conveyor belt Spray device PierceLine FocusLine NitroLine PlasmaLine Laser: CO2 laser TruFlow 5000 with optimized standby mode Maintenance-free turbo radial blower High-frequency excitation Built-in gas mixer Laser control TASC 3 Laser power regulation Laser logbook function Cutting Head: Lens cutting head with 250 mm lens Universal quick-change device (UTI) with bus interface LensLine with condition monitoring ControlLine: Height sensing and external edge detection for sheet material Note: Both machines can also be operated individually Control System: Control: SINUMERIK 840D Automatic shutdown ContourLine FastLine FlyLine Microweld Gedpfx Aeytbfmsf Usbi Teleservice via Internet Data Transmission: USB interface RJ-45 network connection Safety: CE marking Light barriers Multi-chamber extraction system Compact dust extraction unit Programming: Workshop programming Additional Equipment: Laser power: 1 x TruFlow 6000 laser with optimized standby mode Extended Machine Equipment: 2x nozzle changers 2x BrightLine 2x cleaning brushes Both machines suitable for ambient temperatures up to 43°C The seller accepts no liability for typographical or data transmission errors. The machine's condition—optical, technical, and wear—corresponds to its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 1981, Immediately available ex-location: Hydraulic Guillotine Shear Köllschen Type BSH 2000/12.5 Year of manufacture: 1981 Cutting length: 2050 mm Gbsdsyta Efepfx Af Uei Material thickness: up to 12.5 mm Electric backgauge: from 5 to 1000 mm Drive power: 15 kW Weight: 11 t At a price of EUR 3,750 plus VAT ex location

Condition: excellent (used), Year of construction: 2006, load capacity: 150 kg, arm reach: 2,700 mm, The KUKA KR 150 is a 6-axis industrial robot designed for high-precision and high-speed applications. With a 150 kg payload capacity and a wide working envelope, it delivers reliable performance in tasks such as welding, assembly, handling, and machining. Model: KR150-2 2000 Condition: Used Gjdpfjw Nat Iox Af Usbi Year: 2006 Included: Manipulator + KRC2 + KCP2 Teachpendant + All Wire Sets Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: Kuka's Website)

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, load capacity: 180 kg, arm reach: 2,900 mm, Model: KR210 (L180)-2 2000 Payload: 210kg or 180kg Arm Reach: 2700 mm or 2900 mm Condition: Used & Tested & Painted Year: 2005 (Multiple Options Available) Controller Cabinet: KRC2 Included: Manipulator + KRC2 Control Cabin + All Wire Sets + Teach Pendant Gbjdpsq Hfahjfx Af Uei As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs.

Condition: used, Year of construction: 2007, functionality: fully functional, load capacity: 210 kg, arm reach: 2,900 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, This system is equipped with a KUKA KRC2 ed05 control unit and features the KR 210-2 2000 robot model. The robot offers a payload capacity of 210 kg and a reach of 2700 mm. It is suitable for high-precision applications. Main application areas: Spot and arc welding Heavy-duty material handling Palletizing CNC machine tending Press automation Gedpfx Afow H Nuqe Uebi The robot is designed for reliable operation in demanding industrial environments. Model: KR 210 KRC2 ED05 Payload: 210kg Arm Reach: 2700 mm or 3100 mm Condition: Used and tested Year: 2005 (Multiple Options Available) Controller Cabinet: KRC2 ED05 Included: Manipulator + KRC2 ed05 Control Cabinet + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs. ( Source : Kuka's Website )

Condition: used, Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, For Sale: WAGNER WDC 560×2000 Lathe – 2012 General Description: Brand: WAGNER (Germany) Model: WDC 560×2000 Year: 2012 Type: High-precision CNC lathe Control: FANUC Oi-TD Godpfx Aoyc Ticef Uobi Applications: Machining of cylindrical, conical, threaded parts and large-sized components for the mechanical engineering, automotive, aerospace, or energy industries. Technical Specifications: • Maximum turning diameter: 560 mm • Maximum distance between centers: 2,000 mm • Center height: approx. 280–300 mm (to be verified per machine) • Cross travel: approx. 550 mm • Spindle: FANUC CNC, variable speed depending on configuration • Tailstock and live center: for machining of long and precise parts • Chuck: 4- or 6-jaw (depending on configuration) Equipment and Features: • FANUC Oi-TD CNC: flexible programming and automatic cycles • Cast-iron guideways for rigidity and precision • Integrated lubrication system and chip tray • Toolholder and modular turret (depending on configuration) • Possible accessories for threading, taper turning or long workpieces Dimensions and Weight: • Machine dimensions: approx. 5.5 × 2 × 2.2 m (L × W × H) • Weight: approx. 7–9 tons Key Highlights: • Large capacity: 560 mm turning diameter × 2,000 mm between centers • Reliable and widely used FANUC CNC, easy for maintenance and programming • Robust and precise machine, suited for demanding workshops

Condition: used, all stainless steel twin shaft paddle mixer intermeshing mixer Gsdpfxeypbgio Af Uebi useful content : 2.000 L dimensions (l x w x h) : ± 4.100 x 1.500 x 2.700 mm 1 front discharge guard 18 kW

Condition: ready for operation (used), WMW Niles Ø 1400 x 2000 mm Gjdpfxex Imlco Af Usbi Distance between centers: 2000 mm Swing over bed: 1400 mm Swing over cross-slide: 1100 mm Swing in gap: 1800 mm Diametre of main spindle bore: 90 mm Power on main spindle: 14 kW Number of speeds: 382 rpm Chuck (3/4 pinch) -- diametre: 1200 mm

Condition: ready for operation (used), controller model: Fanuc, swing diameter over cross slide: 2,000 mm, Uitgerust met SK-kit: Gsdpfx Afoyl A Dzj Usbi - automatische gereedschapswisselaar 8 posities - VDI-type - hydraulische klauw - hydraulisch contrapunt - hydraulisch centrum Swing over bed: 620 mm Swing over cross-slide: 580 mm Dia of spindle bore: 80 mm Power on the spindle: 11 kW Number of speeds: 1 > 2500 rpm Toolchanger: yes Number of tools: 8 positions

Condition: ready for operation (used), 6-kolomspers met 4 hydraulische zuigers opwaartse slag diameter van de zuiger: 450 mm slag: 550 mm Maximale kracht van 2000 ton max opening zonder verwarmde tafels: 780 mm max opening met verwarmde tafels: 655 mm Verwarmde tafels met stoom of olie Maximale temperatuur: 300° C Totale oppervlakte: 2000 x 2000 mm Twee tafels van 2000 x 1000 mm (kunnen samen of apart gebruikt worden) 2x 11 kW hydraulisch vermogen met invoerroltafel: 4260 x 1550 x 1250 mm Olietank op platform: 2000 x 2000 x 2500 mm Totale hoogte van de pers: 3600 mm De pers zit 920 mm in de grond Werkhoogte is 750 mm Toepassingen: - composietmateriaal - vulkaniseren - buigen / strekken Gbedpfjv Rwftjx Af Uei

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, GF AgieCharmilles CUT 2000 S Wire EDM Machine – Year 2015 – EROWA Tooling Package High-precision CNC wire EDM machine from GF AgieCharmilles in excellent technical condition. Manufacturer: GF AgieCharmilles Model: CUT 2000 S Year of manufacture: 2015 Axis travels: X-axis: 350 mm Y-axis: 250 mm Z-axis: 256 mm Maximum workpiece size: 750 × 550 × 250 mm Maximum workpiece weight: 400 kg Machine hours: Operating hours: 73,182 h Erosion hours: 16,508 h Technical data: Power supply: 3 x 400 V Machine weight: approx. 3,500 kg Equipment: • Automatic wire threading • CNC control system GF AgieCharmilles • Complete EROWA tooling package included • Multiple EROWA fixtures and clamping elements • Precision EDM tooling and accessories (see photos) Advantages: • Very reliable EDM machine for tool and precision part manufacturing • High cutting accuracy and excellent surface finish • Modern GF AgieCharmilles control system Gbsdpfx Afsyr Spmo Uoi Condition: The machine is in good working condition. Machine is currently powered and can be inspected and tested under power. Location: Czech Republic Availability: Immediately

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 650 mm, total length: 6,500 mm, table length: 2,000 mm, table width: 1,000 mm, total width: 3,600 mm, spindle speed (max.): 12,000 rpm, total height: 4,000 mm, overall weight: 14,000 kg, Equipment: rotational speed infinitely variable, The NICOLÁS CORREA EURO 2000 milling machine is a pre-owned machine that offers reliable performance for a wide range of industrial applications. Equipped with a HEIDENHAIN TNC 530 CNC control, this model ensures precise and efficient operation. Its working table measures 2,000 × 1,000 mm, providing a spacious and versatile working area. Godpfxsul Txzs Af Uebi The machine travels are 2,000 mm on the X axis, 1,250 mm on the Y axis, and 650 mm on the Z axis, offering sufficient capacity for complex machining tasks. The distance between columns is 1,250 mm, contributing to a robust and stable structure. The HSK 63 head with electrospindle reaches speeds of up to 12,000 rpm, enabling high-precision machining across a variety of materials. In addition, the milling machine features full enclosure guarding, improving operator safety while reducing noise and dust during operation. This used but well-maintained machine is an excellent option for companies looking to increase their production capacity without compromising quality.