Used Prestotig 250 for sale (10,342)

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm Prodpfx Afjduab Ns Seb -Rezess: Ø 194 mm -Hole circle: 3 x 214 mm -Throughout: Ø 70 mm -Weight: 17 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -soft: interchangeable jaws -Bayonet: Short cone flange, cone size 6, cone Ø 106 mm, bolt circle Ø 133.4 mm -Passage: Ø 81 mm Prjdpfx Aoduacief Ssb -Weight: 22 kg

Condition: used, 2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, -2 pillars: punching tool -Recording: Ø 40 mm bolt -Dimensions: 300/360/H375 mm -Weight: 130 kg Prjdpfx Asdxxrrsf Seb

Condition: used, Clamping angle for workpiece clamping -Dimensions: W/H/L 250/775/245 mm -Thickness: 27 mm -Surface: milled -Thread holes: M16 Pjdpfedzd Hvex Af Ssrb -Number: 2x mounting brackets available -Price: per piece -Weight: 98.5 kg/piece

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange Prjdod Nxu Uspfx Af Seb -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 250 mm -Hole circle: Ø 170 mm -Dimensions: Ø 250/38 mm -Weight: 9 kg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate Prsdped N Uy Hjfx Af Seb -Outer diameter: 250 mm -Hole circle: Ø 225/Ø 14 mm -Dimensions: Ø 250/H45 mm -Weight: 9.4 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 100 mm -Piston rod: Ø 60 mm -Stroke: 250 mm -Total length retracted center center hole: 690 mm -Piston rod holder: Ø M48 mm Pjdpfx Afjd Evuqo Sorb -Cylinder holder: Ø 60 mm -universally applicable: -Number: 1x cylinder available -Price: per piece -Dimensions: 750/250/H160 mm -Weight: 52 kg/piece

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 250 mm -Short taper flange for: bayonet disk mounting DIN 55027 -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 11 kg Predsd Hcq Ujpfx Af Ssb

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange for: three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: 250 mm -Cone diameter: 106 mm -Bolt circle: Ø 4 x 160 mm -Weight: 8 kg Podjd Hd Nmepfx Af Sorb

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck, three-jaw chuck with clamping plate -Manufacturer: Röhm, three-jaw chuck with clamping plate Prodpfxshbwc As Af Ssb -Mouth size: Ø 250 mm -Passage: Ø 76 mm -Mounting plate: 500 x 310 mm -Overall dimensions: 500/310/H300 mm -Weight: 72 kg

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: 2 columns -Mounting: Bolt Ø 40 mm -Die stamp: see photos -Dimensions: 690/290/H290 mm -Weight: 61 kg Prodpfx Afohb N Alo Seb

Condition: new, Year of construction: 2026, Table design: -High performance -Belt sanding unit with adjustable height from 0-90° -Maximum usable surface area for surface sanding -Belt adjustment with fine adjustment Combined belt/disc sanding machine -Longitudinal guide for material guidance -Perfectly balanced and with low vibration -Connection on both sides for dust extraction, Ø 50 mm -Motor protection switch with undervoltage release -Fixed stop Prodpehhiaaofx Af Seb -1 sanding belt standard (brown), grit 80 -1 sanding disc 250 x 40 x 51 mm, grit 80 -Spark arrester -Connection cable with CEE plug Additional cost for special equipment/option: - Machine stand, emergency stop button, brake and dust extraction / €2,260 (item 330.370) - Machine stand, emergency stop button and brake / €1,030 (item 330.365) - Machine stand with water immersion container / €360 DELIVERY: FREE TO YOUR DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, Rotary table, rotary indexing table, dividing head, dividing head Psdpfx Afjhikzlo Sorb -Manufacturer: Walter, rotary table type RT 250 TG -Clamping surface: Ø 250 mm -Bore center: Ø 48 mm -Groove width: 12 mm -Dimensions: 460/400 / H150 mm -Weight: 44 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Rohm, three-jaw chuck Chuck size: Ø 250 mm -Type: DH-B / 8-250 x 3 TGL 30-2332 Pedpfog Rcy Tex Af Ssrb -Throughout: Ø 40 mm - Hole circle: Ø 171 mm -Shot: short taper 8 -Weight: 24 kg

Condition: good (used), Base for press brake tool, bending tool, die, bottom knife, lower tool, prism tool, reversible prism, 1-piece die block for die bending machine, die tool, folding tool Predpfx Aohqf Rnjf Sjb -Support for bending tool: from Promecam STPC 250 40 121 press brake -Length: 4200 mm -Dimensions: see drawing in the photos -Dimensions: 4200/106/H106 mm -Weight: 212 kg

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, drive flange Prjdpjf Ek Hisfx Af Ssb -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 250 mm -Inner diameter: 65 mm -Socket: Cone Ø 103 mm -Bolt circle: Ø 133 mm -Bolt circle: Ø 235/13 mm -Dimensions: Ø 250 x 100 mm -Weight: 13 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams Podpfx Afjgv Nrks Serb -Hydraulic cylinder: with pressure plate, stroke 250 mm -Print plate: 200 x 140 mm -Cylinder: outside Ø 90 mm -Mount: bolt circle Ø 157 mm -Number: 4x cylinders available -Price per piece -Dimensions: 605/200 / H200 mm -Weight: 40 kg / pc.

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Forkardt, wedge bar chuck with clamping plate -Chuck size: Ø 250 mm -Bolt circle: Ø 235 mm -Mounting: Short taper 11 (196.8 mm) -Through hole: 60 mm -Total dimensions: Ø 400 x 265 mm -Weight: 67 kg Predpfegp Tm Sjx Af Sjb

Condition: used, Year of construction: 1984, Gear motor, electric motor -Manufacturer: Eberhard Bauer, gear motor type DO 42 F 04/141 -Speed: 250 rpm -Power: 110 W / 2700 rpm -Shaft: Ø 10 x 25 mm -Design: B5 -Protection class: IP55 -Number: 4x motor available Podpfxot Drkaj Af Sjrb -Price per piece -Dimensions: 250/110/H110mm -Weight: 3.6 kg/piece

Condition: used, Year of construction: 1983, workpiece diameter 250 mm centre distance 0 mm honing length max. mm max. module 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Podpfx Afst Hwzpj Serb Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. * Sliding doors with foot switch. * Separate hydraulic unit. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. We have a large selection of gear machines available. Please let us know your requirements.

Condition: used, TECHNICAL DETAILS - axes number : 3 CAPACITY - machining diameter : 250 [mm] - travels (X/Z) : 1600 / 300 [mm] - rapid feeds (X/Z) : 60 / 30 [m/min] SPINDLE - spindle nose : DIN55026 - size 6 - power : 18 / 22 [kW] - torque : 202 / 250 [Nm] - speeds : 0 - 6.000 [rpm] - indexing precision axis C : 0,001 [°] TURRET - number of positions : 12 - tool holders : VDI40 - number of rotary positions : 12 - rotary tools speed : 6.000 [rpm] - rotary tools power : 8,5 [kW] MILLING HEAD - number of spindles : 6 - 5 HSK 50 spindles upon Ø : 107,95 [mm] - 1 HSK40 spindle : at center ELECTRICAL SUPPLY - voltage : 400 [V] - installed power : 45 [kW] DIMENSIONS - floor space : 4.550 x 2.810 [mm] - height : 3.600 [mm] - weight : 10.000 [kg] EQUIPMENT - control CNC SIEMENS 840D-sl - 3 colors status lamp - linear scales : HEIDENHAIN - automatic part loader with conveyor - chips conveyor - coolant tank * with pump 10 bars * with washing gun Pedpfsuhbfysx Af Serb - coolant through spindle - IFS mist separator - collection of parts supports - collet chuck - 3 live tool-holders

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Hydraulic cylinder: double-acting stroke 250 mm -Piston rod: Ø 22 mm -Mounts: Ø 20 mm Pedpfx Afehwgd Aj Serb -Cylinder: outside Ø 50 mm -Rod end: Elges GK 20DO -Hole spacing: retracted 425 mm -Number: 29x cylinder available -Price per piece -Dimension: 480/50/H70 mm -Weight: 4 kg/pc.

Year of construction: 2021, operating hours: 2,235 h, condition: used, used screwcompressor immediately available: variable RENNER RSF 250 D - (6 to 8 bar) frequency-controlled, direct-driven screw compressor with RENNERtronic control with REflex control - adjustable pressure range 6 to 8 bar Hours: 2235 h Pressure: 6 to 8 bar Nominal output: 250 kW Quantity delivered: at 6 bar: 12.13 to 49.30 m³ / min at 7 bar: 11.80 to 44.50 m³ / min Sound level: 84 dB (A) Compressed air outlet: DN 100 Prsdpfx Afjh Rvpke Sjb Dimensions length x width x height: 3663 x 2100 x 2338 mm Weight: 5530 kg Year: 2021 Visit our shop. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate -Magnetic plate: clamping surface 800 x 250 mm Podoh R D Rdepfx Af Ssrb -Voltage: 110V 1.7A -Transport box: included -Quantity: 1 piece available -Dimensions box: 1160/480/H250 mm -Weight: 112kg

Condition: used, Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders, clamping cylinders Podpfeiiwgiox Af Serb -Manufacturer: Festo, standard cylinder type DN-125-250 S6 PPV -Stroke: 250mm -Piston: Ø 125 mm -Piston rod: Ø 32 mm / M24 x 2 -Max. Pressure: 10 bars -Dimensions: 530/140/H140 mm -Weight: 12.7 kg