Used Pressure Washer for sale (15,649)

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Nwedpfx Aol Hx Adsh Hob

Condition: used, Year of construction: 1997, Overview This crate washer was manufactured in 1997 by the German company Klann. The 1800 N model is a single-bath crate washing system designed for cleaning beverage crates of various sizes at a capacity of up to 2000 crates per hour. It is still installed and immediately available. Technical data  Capacity: 2000 crates/hour (for GDB crates, lengthwise) Crate formats: 12 × 0.7 L crates (lengthwise) Baths: 1 Construction: Stainless steel Length (total): 4,640 mm Width: 1,300 mm Electrical connection: 16 kW Vapor extraction Njdpfxoxrg H Ss Ah Howb

Condition: used, Year of construction: 2014, Overview This keg washer was purchased in 2014 and manufactured by M+F Keg-Technik (Germany). The machine is offered for sale as it is no longer needed. A new pump was installed in June 2025. The machine is immediately available. Technical Data Capacity: Approx. 10–15 KEG/h (program times: 360 sec / 272 sec / 240 sec) Dimensions: Width: approx. 380 mm Length: approx. 850 mm Height: approx. 1,000 ± 50 mm Tank capacity: approx. 50 L Heating: Voltage: 400 V, 50 Hz Power: 3 kW Pump: Voltage: 400 V, 50 Hz, IP 54 Power: 0.55 kW Capacity: 4,000 l/h, 2.0 bar New pump installed June 2025 Program: Non-steam treatment program Cycle times depending on throughput (10–15 KEG/h) Nwjdeyb Tglepfx Ah Hjb

Condition: used, Year of construction: 1996, Overview  This Krones Lavatec KES-2-5-312/25-110 bottle washer was manufactured in 1996 and has an output of 29,000 bottles per hour. The machine has been modernized several times, including an S7 control system, caustic filtration with drum screen and pH value measurement for hot water 1. The machine will run until the end of January 2026 and can be inspected in person at any time until then. Technical details  Output: 29,000 bottles/hour Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Equipment & modernizations  Plastic cell with 110 pitch Suitable for swing-top bottles Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Modernizations: Retrofitted S7 control system Drum screen for caustic filtration Railing on the machine Hanger-specific caustic spraying in the deflector Cleaning & heating system: Rental rotating spraying Heating with tube bundle exchanger and hot water Lye concentration measurement and dosing control, also for post-caustic pH value measurement for hot water 1 Soaking & rinsing system: Double pre-soak with sieve belt Lye volume: 30 m³ Caustic solution, hot water 1, hot water 2, cold water and fresh water Head section can be steamed and rinsed with disinfection H₂ suction Nodpfxjvxtavj Ah Howb

Condition: used, Year of construction: 2013, Overview The bottle washer was manufactured by the German company Krones in 2013 and put into operation in 2014. It has been serviced annually. In addition, tenside lye cleaning and spare parts can still be purchased. DISMANTLING INCLUDED. Technical data  Capacity: 66,000 bph Maximum bottle diameter 69 mm Set up for the following formats:  Vichy 0,33l Long-Neck 0,33l Long-Neck 0,5l NRW 0,5l  Steinie 0,33l Nwodpfx Ahsl Hx Eno Hsb

Condition: used, Year of construction: 2020, Overview  This semi-automatic keg washer was manufactured in 2020 by Italian company SIFA. The Idrokeg 21 is equipped with two cleaning heads and designed for efficient steam-heated keg washing. With a capacity of up to 12 kegs per hour, it is suitable for small to medium-sized breweries. The unit is in very good condition, ready for immediate use, and comes with dedicated tanks, pumps, and cleaning features. Technical data  Capacity: 12 kegs/hour Cleaning stations: 2 Heating: Steam Formats: S-type kegs Nwodpsxcul Dsfx Ah Hjb

Condition: used, Year of construction: 2000, Overview  The crate washer was manufactured in 2000 by the German company Bohrer. It is located at a German brewery and was part of a plant that has been shut down as it was replaced by a completely new line. In autumn 2024 the line was stopped and the machine was dismantled and stored.  Technical Details  Capacity: up to 2,000 crates/hour (can be adjusted from 500 - 2,500 crates/hour) Formats: crate of 12 bottles 700ml 356 x 275 x 346 travel direction crosswise crate of 20 bottles 250ml 360 x 275 x 255 travel direction crosswise crate of 20 bottles 500ml 400 x 300 x 290 travel direction crosswise crate of 20 bottles 500ml 400 x 333 x 260 travel direction crosswise Horizontal and vertical spray nozzles Spraying with hot caustic and fresh water Caustic heater with temperature regulation is integrated in the machine Machine is heated by steam Dimensions: Length: 4800mm Width: 900mm Height: 1400mm Weight: 1800kg Sieves for removal of dirt Incl. documentation Incl. spare parts list Incl. Electrical diagram Nwjdpjvm D Umsfx Ah Hsb

Condition: used, tank capacity: 313 l, GENERAL Design: upright Notes: 3-legged frame, steel (painted; 1 leg shortened); clamp screws steel (with signs of corrosion) Internal diameter: 700 mm Total height: 3,050 mm Heating/Cooling: present Power: 4 kW Max. allowable operating overpressure: 10.0 bar Max. overpressure: 3.00 bar Top cover: removable / liftable top cover Agitator: anchor agitator Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Volume: 313 liters Jacket volume: 90.0 liters Jacket material: V2A 1.4301 (AISI 304) Product-contact material: V4A 1.4439 (AISI 316) Condition: used Cylindrical height: 630 mm Previous use: chemicals VESSEL Support type: frame HEATING/COOLING JACKET Bottom temperature control: half-pipe coil Nwedpfx Asxqbbhoh Hjb EQUIPMENT Manhole / Dome: handhole Outlet: present Note: slight residues AGITATOR Voltage Volts: 220/380 Volts Agitator arrangement: centrally mounted on the top cover

Condition: used, tank capacity: 630 l, GENERAL Design: suspended Remarks: Support ring and vessel flange made of Fe; handhole cover plated Internal diameter: 1,000 mm Total height: 2,000 mm Heating/cooling: available Max. admissible operating temperature: 300 °C Max. admissible operating overpressure: 32.0 bar Max. overpressure: 6.00 bar Top cover: removable / hinged top cover Agitator: anchor agitator Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.00 bar Volume: 630 liters Jacket volume: 14.5 liters Cylinder wall thickness: 7.8 mm Jacket material: V4A 1.4571 (AISI316) Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 800 mm Previous application: chemical industry VESSEL Max. admissible operating temperature: 300 °C Stand type: ring HEATING/COOLING JACKET Bottom temperature control: half-pipe coil Nwodsxqba Djpfx Ah Hsb EQUIPMENT Manhole/Dome: handhole Outlet: flange DN50 AGITATOR Agitator arrangement: centrally mounted on top cover Agitator equipment: motor/gear unit missing TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 15.3 mm Top cover wall thickness: 15.8 mm

Condition: used, tank capacity: 1,150 l, GENERAL Equipment: Crane lugs Design: hanging Remarks: Halar coating inside (very good resistance to acids, alkalis, and solvents); no nameplate available; several connections have been modified by the previous operator, including one new outlet that was welded in (no coating in the weld area of the bottom plate and in the new outlet itself; no coating on the manway cover either); 5-legged frame made of Fe (galvanized; one leg slightly bent) Outer diameter: 1,250 mm Inner diameter: 1,100 mm Overall width: 1,660 mm Overall height: 2,600 mm Overall length: 1,850 mm Heating/cooling: available Insulation: available Max. overpressure: 0.60 bar Top head: bolted cover Agitator: agitator flange Location: Bremen Technical documentation: drawing Cylinder temperature control: half-pipe coil Vacuum: 1.00 bar Volume: 1,150 liters Cylinder wall thickness: 4.0 mm Jacket material: V4A 1.4571 (AISI316) Product contact material: Halar E-CTFE coating Condition: used Cylindrical height: 870 mm Previous application: gasoline TANK Max. permissible operating temperature: 120 °C Support style: frame HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation shell: bolted Insulation shell material: aluminum EQUIPMENT Manhole / dome: on top head (DN 400) Outlet: flange DN100 Note: minor residues, dents on insulation shell MATERIAL SPECIFICATION Head material: AISI316 (V4A) 1.4571 Cylinder material: AISI316 (V4A) 1.4571 AGITATOR Agitator arrangement: eccentric in top head TECHNICAL DATA / DIMENSIONS Njdoxqbakopfx Ah Hewb Head wall thickness: 4.0 mm

Condition: used, tank capacity: 720 l, GENERAL Equipment: crane lugs Design: suspended Remarks: 3 feet made of Fe; bolts for the top flange mostly missing Internal diameter: 790 mm Total height: 2,250 mm Heating/cooling: present Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 2.00 bar Top closure: bolted lid Agitator: beam agitator Location: Bremen Cylinder jacket temperature control: half-pipe coil Nameplate: Volume: 720 liters Double jacket volume: 52.0 liters Cylinder wall thickness: 6.2 mm Double jacket material: V4A 1.4401 (AISI316) Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,220 mm Last application: chemicals VESSEL Max. permissible operating temperature: 150 °C Support type: feet HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Outlet: available Note: motor/gearbox missing AGITATOR Baffle: Agitator arrangement: centrally mounted on top cover TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.9 mm Nedpfexqa U Hex Ah Hswb Top cover wall thickness: 8.2 mm

Condition: used, tank capacity: 1,333 l, GENERAL Design: vertical Notes: Handhole DN 200 Speed: 49 rpm External diameter: 1,250 mm Internal diameter: 1,188 mm Total height: 2,850 mm Heating/Cooling: equipped Power: 0.75 kW Max. permissible operating temperature: 143 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 3.00 bar Top cover: removable/top-hinged Agitator: beam agitator Location: Bremen Technical documentation: drawing of a similar vessel Cylinder temperature control: double jacket Nameplate: Vacuum: 1.00 bar Volume: 1,333 liters Double jacket volume: 100.0 liters Double jacket material: V2A 1.4301 (AISI304) Product-contacting material: V4A 1.4571 (AISI316) Condition: used Previous application: pharmaceutical VESSEL Max. permissible operating temperature: 143 °C Base design: height-adjustable feet Number of feet: 3 Nedpjxqa Ugsfx Ah Hjwb HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Manhole / Dome: handhole Outlet: available Note: slight residues/adhesions MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR Voltage: 220/380 Volts Agitator arrangement: centrally in the top cover

Condition: used, tank capacity: 2,130 l, GENERAL Equipment: spray head, crane lugs Design: vertical Remarks: Total height including base platforms and motor cover; double outlet pipe inner diameter approx. 35 mm; insulation jacket with minor damage; one crack at the upper double jacket connection Speed: 201 rpm External diameter: 1,500 mm Internal diameter: 1,260 mm Total height: 4,050 mm Heating/cooling: available Insulation: available Power: 4 kW Max. permissible operating temperature: 140°C Nsdpoxqa Uaefx Ah Hjwb Max. permissible operating overpressure: 4.0 bar Max. overpressure: 3.00 bar Agitator: inclined blade agitator Location: Bremen Cylinder temperature control: double jacket Nameplate: Vacuum: 1.00 bar Volume: 2,130 liters Double jacket volume: 400.0 liters Product contact material: V4A 1.4401/04 (AISI316) Condition: used Last intended use: pharmaceutical VESSEL Max. permissible operating temperature: 140°C Support type: feet HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in top head (Ø 450 mm) Outlet: available MATERIAL CHARACTERISTICS Inner surface: ground Temperature control system material: V2A 1.4301 (AISI304) Foot material: stainless steel AGITATOR Voltage: 230/400 V Agitator arrangement: centrally mounted on top head

Condition: used, tank capacity: 650 l, GENERAL INFORMATION Equipment: Spray head Design: upright Remarks: Metallic discoloration on the inside Speed: 1415 rpm Outer diameter: 1,040 mm Inner diameter: 900 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 2,380 mm Heating/Cooling: present Insulation: present Power: 1 kW Max. permissible operating temperature: 170 °C Max. permissible operating overpressure: 8.0 bar Max. overpressure: 1.50 bar Agitator: Propeller Location: Bremen Technical documentation: Drawing, acceptance certificate Cylinder temperature control: Half-pipe coil Nameplate: Volume: 650 liters Cylinder wall thickness: 6.0 mm Double jacket material: V2A 1.4301 (AISI304) Product contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 900 mm Previous application: Pharmaceuticals VESSEL Max. permissible operating temperature: 170 °C Base design: on feet Number of feet: 4 HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel FITTINGS Manhole / dome: in the top lid (DN 400) Discharge outlet: 25 mm Nsdpsxqa T Nsfx Ah Howb MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR Voltage: 220/380 Volt Agitator position: eccentric, in top lid TECHNICAL DATA / DIMENSIONS Base wall thickness: 5.0 mm

Condition: used, tank capacity: 265 l, GENERAL INFORMATION Design: vertical Remarks: Cone height approx. 1200 mm; handhole approx. 220 x 315 mm; handhole collar and handhole cover made of Fe; one vessel is missing the handhole cover; handhole cover fastenings are incomplete on the other vessels Speed: 90 - 546 rpm Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 3,350 mm Heating/cooling: available Power: 1.5 kW Max. permissible operating temperature: 100 °C Max. permissible operating overpressure: 0.49 bar Max. overpressure: 20.5 bar Agitator: propeller Location: Bremen Nameplate: Nodpfx Ahjxqa T Aj Hewb Volume: 265 liters Double jacket volume: 25.0 liters Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: steel alloys VESSEL Max. permissible operating temperature: 100 °C Lower head: conical bottom Support type: on feet Number of feet: 4 pcs HEATING/COOLING JACKET Lower head temperature control: double jacket EQUIPMENT Manhole/dome: handhole Outlet: available Note: slight residues MATERIAL SPECIFICATION Feet material: steel AGITATOR Voltage: 290/500 V Agitator arrangement: eccentric in upper head Agitator equipment: 1 agitator 59 - 363 rpm

Condition: used, tank capacity: 280 l, GENERAL Design: vertical Remarks: No warranty on the functionality of the jacket and agitator (not tested) Outer diameter: 780 mm Inner diameter: 600 mm Heating/cooling: available Insulation: available Max. overpressure: 2.5 bar Agitator: disc agitator Agitators: 1 agitator Location: external storage Volume: 280 litres Product contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,000 mm VESSEL Bottoms: Klöpper bottom Mounting type: height-adjustable feet Number of feet: 3 pieces EQUIPMENT Outlet: 32 mm MATERIAL PROPERTIES Nsdoxqa Tvjpfx Ah Howb Feet material: stainless steel

Condition: used, tank capacity: 3,685 l, GENERAL INFORMATION Design: suspended Remarks: 4 lugs made of steel; 1 vessel with insulation (insulating shell made of steel, painted; external diameter approx. 1780 mm) Speed: 347 rpm Internal diameter: 1,600 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Overall height: 3,650 mm Heating/cooling: available Power: 1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.2 bar Shaft seal: Mechanical seal with thermosiphon vessel Agitator: Propeller Location: Bremen Technical documentation: Drawings, TÜV certificates Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,685 liters Jacket volume: 65.0 liters Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Last intended application: Chemical industry VESSEL Max. permissible operating temperature: 200 °C Support type: Lugs HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Base temperature control: Half-pipe coil EQUIPMENT Manhole/dome: on top head (DN 500) Discharge: Flange DN80 Note: slight adhesions, metallic discolorations inside MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI316) AGITATOR Agitator manufacturer: Stelzer Voltage: 500 V Agitator arrangement: eccentric on top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5 mm Top head wall thickness: 7 mm Nsdoxqa Tpjpfx Ah Hewb

Condition: excellent (used), Professional ATEQ F620 leak and pressure tester, designed for quality control and production testing. The device enables precise pressure-based (air) leak testing, ideal for applications in automation, pneumatics, automotive, and serial production. Very good technical condition – the device powers up correctly and is ready for use. Current calibration/service: 16.04.2024 (ATEQ) – visible on seals and labels. Features and equipment: • clear LCD display • automatic ZERO function • test programs • communication ports (RS232 / MODBUS / PROFIBUS – depending on configuration) • analog and digital outputs Nedpfx Ahoyc H T Ie Hewb • integrated pneumatic system with filter • robust industrial housing • 230 V power supply Laboratory and production-grade equipment – this is not workshop or amateur equipment.

Condition: good (used), Pressure switch -Type: C6045D 1043 -0.2-3 mbar -220/240 VAC 50 Hz 12(2) A Nwodpfjb A Hwfox Ah Hob -Pmax: 100 mbar -Protection class: IP 40 -Quantity: 3 pieces available -Price: per piece -Weight: 1.2 kg/piece

Year of construction: 2015, condition: used, functionality: fully functional, This listing is for a 150 LITRE boiling kettle from the premium manufacturer MKN, model Optima 850. The unit is in good used condition, free of defects, following a comprehensive inspection. You will receive an invoice with VAT shown separately. Our used equipment service for you: - 6-month warranty on electrical components, limited to replacement of defective parts (excl. installation/removal costs) - High-quality branded equipment at fair prices - Professional overhaul / inspection & expert cleaning - Tested & fully functional – or your money back - Flexible shipping or collection options - Expert advice – before and after purchase - Provision of operating manuals, wiring diagrams & spare parts - DGUV V3 inspection Technical data: W x D x H: approx. 1000 x 850 x 700 mm Inner kettle: diameter 665 mm, depth 500 mm Electrical connection: V: 400 / kW: 26 Serial number: 15213196 Model: 2022805C Rated capacity: 163 litres Usable fill quantity: 150 litres Condition: Used, fully functional after major inspection Additional features: - Inner kettle made entirely of highly corrosion-resistant chrome-nickel steel (1.4404) - Double-jacketed kettle with separate, integrated, and maintenance-free VAPRO steam generator system for rapid heat-up times, low energy and water consumption, and high efficiency - Short heating times due to VAPRO rapid steam system - Standard with 3 cooking levels (gentle simmer, medium, and vigorous boil) Njdpfxjycq D Ro Ah Hewb - Automatic supply water monitoring and refilling, ensuring continuous operation - Double-walled hinged cover and mixing faucet as standard - Draining via front-mounted safety drain valve - Standard with interface for connection to an energy optimisation system in accordance with DIN 18875 and potential-free contact Shipping: - Delivery or self-collection by arrangement - Worldwide shipping on request - Shipping to islands or mountain stations only by arrangement Subject to change and errors. Do you have any questions, require advice, or would like to view the equipment on site? You can reach us by phone during our business hours: Monday–Friday 09:00–13:00 and 14:00–17:00. Sale exclusively according to our general terms and conditions (GTC).

Condition: used, tank capacity: 92 l, GENERAL Design: suspended Outer diameter: 610 mm Inner diameter: 406 mm Total height: 1,100 mm Insulation: available Max. overpressure: 1.0 bar Location: Bremen Technical documentation: Drawing, test certificate Nameplate: Vacuum: 6.5 bar Volume: 92 liters Cylinder wall thickness: 4 mm Product-contact material: steel Condition: used Cylindrical height: 600 mm Last application: pharmaceutical chemistry TANK Max. allowed operating temperature: 200 °C INSULATION Insulation jacket material: aluminum Insulation thickness: 100 mm Nwjdjyck Naepfx Ah Heb EQUIPMENT Outlet: flange DN65 TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm

Condition: used, tank capacity: 700 l, GENERAL Equipment: butterfly valve Nwjdpeyckzpofx Ah Heb Construction type: upright Remarks: Frame: Fe; manway diameter: approx. 380 mm; new outlet valves (butterfly valve) optionally available for €295; External diameter: 940 mm Total width: 1,050 mm Total height: 1,750 mm Total length: 1,050 mm Max. excess pressure: 0.5 bar Location: External storage Volume: 700 litres Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 940 mm TANK Lower bottom: conical bottom Support type: frame EQUIPMENT Manway / dome: on the top head Outlet: 51 mm Note: slight residues

Condition: used, tank capacity: 1,100 l, GENERAL Equipment: Disc valve Design: Container Remarks: 4-legged frame made of V2A; manhole diameter approx. 355 mm; outlet inner pipe diameter approx. 72 mm (with mounted disc valve; outlet can be enlarged to inner pipe diameter approx. 80 mm); container has overpressure damage (cylinder and upper head bulged outward); one larger dent at the transition between cylinder/upper head; slight internal corrosion inside the container (see photos) Internal diameter: 1,070 mm Total height: 2,400 mm Max. overpressure: 1.0 bar Location: Bremen Nameplate: Volume: 1,100 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,200 mm Last application: pharmaceuticals Nwsdpeyckylsfx Ah Hob TANK Bottom: Conical bottom Mounting: Frame Number of legs: 4 pcs EQUIPMENT Manhole/dome: in upper head Outlet: present Comment: slight residual deposits

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Disc valve Design: Container Remarks: 4-legged frame made of V2A; 1 dent in cylinder/top head transition Internal diameter: 1,000 mm Total height: 1,950 mm Max. overpressure: 1.0 bar Location: Bremen Nameplate: Volume: 1,000 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 960 mm Previous use: Pharmaceutical TANK Max. permissible operating temperature: 50 °C Support design: Frame Number of legs: 4 pcs Njdpfx Aeyckx Ioh Howb EQUIPMENT Manhole / Dome: in top head (DN 400) Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Leg material: Stainless steel

Condition: used, tank capacity: 3,000 l, GENERAL Equipment: Spray head, crane lugs Design: vertical Remarks: Cone height approx. 1,250 mm Inner diameter: 1,490 mm Total height: 3,200 mm Max. overpressure: 0.3 bar Location: Bremen Nameplate: Vacuum: 1.0 bar Volume: 3,000 liters Cylinder wall thickness: 5.1 mm Nwedpfoyckq Rjx Ah Hsb Product contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,050 mm Last application: cosmetics VESSEL Max. allowable operating temperature: 130 °C Bottom: conical bottom Mounting type: on feet Number of feet: 4 pieces EQUIPMENT Manhole / dome: in the top head (DN 500) Outlet: DN80 DIN 11851 Note: slight residues, metallic discoloration inside MATERIAL QUALITY Feet material: stainless steel TECHNICAL DATA / MEASUREMENTS Bottom wall thickness: 4.6 mm Top wall thickness: 8.4 mm