Used Pressure Reducer for sale (15,975)

Condition: used, tank capacity: 270 l, GENERAL Design: vertical Remarks: Handhole diameter approx. 260 mm (handhole cover plated); deposits and metallic discoloration inside the vessel Internal diameter: 690 mm Total height: 2,120 mm Max. overpressure: 2.0 bar Location: Bremen Nameplate: Volume: 270 liters Product-contact material: V4A 1.4429 (AISI316) Condition: used Cylindrical height: 670 mm Psdpsyciydjfx Ahvjgi Last intended use: biochemistry VESSEL Support type: feet Number of feet: 4 pcs EQUIPMENT Manhole / dome: handhole Outlet: 52 mm MATERIAL SPECIFICATION Flange material: steel Foot material: steel

Condition: used, tank capacity: 1,000 l, GENERAL INFORMATION Construction: upright Remarks: Manhole diameter approx. 420 mm Internal diameter: 1,190 mm Total height: 2,550 mm Max. overpressure: 2.0 bar Location: Bremen Pedpfoycix Tox Ahvjgi Nameplate: Vacuum: 1.0 bar Volume: 1,000 litres Product-contact material: V4A 1.4429 (AISI316) Condition: used Cylindrical height: 950 mm Previous use: biochemistry TANK Max. permissible operating temperature: 200 °C Stand type: feet Number of feet: 4 pcs EQUIPMENT Manhole / dome: in top head Outlet: 53 mm Note: slight residues, manhole cover plated MATERIAL SPECIFICATION Foot material: steel

Condition: used, tank capacity: 640 l, GENERAL Design: vertical Notes: Handhole diameter approx. 200 mm; slight differences in the design of the two vessels: Vessel 1: feet with height-adjustable ball head screws (missing in vessel 2); Vessel 2: overall height approx. 2,200 mm is slightly higher due to flanged fittings on the top cover; flanged fitting on the outlet flange reduces the outlet to 25 mm (see photos) Internal diameter: 800 mm Total height: 2,000 mm Max. overpressure: 2.0 bar Location: Bremen Nameplate: Vacuum: 1.0 bar Volume: 640 liters Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 1,000 mm Most recent use: Biochemistry VESSEL Max. permissible operating temperature: 133 °C Support type: feet Number of feet: 4 pcs Pjdeycix Hepfx Ahvogi EQUIPMENT Manhole / dome: handhole Outlet: 48 mm MATERIAL SPECIFICATION Foot material: stainless steel

Condition: used, tank capacity: 1,500 l, GENERAL Equipment: Crane lugs Design: Vertical Remarks: Armaflex insulation in partial areas of the cylinder; manhole approx. 325 x 420 mm; 3 flow breakers and 1 perforated pipe inside the vessel (see photos) Internal diameter: 1,100 mm Total height: 2,700 mm Insulation: available Max. overpressure: 6.0 bar Location: Bremen Nameplate: Volume: 1,500 litres Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,250 mm Last intended use: Biochemistry VESSEL Mounting type: Feet Number of feet: 3 pieces INSULATION Insulation material: Armaflex Insulation thickness: 20 mm EQUIPMENT Manhole / dome: in the cylinder Outlet: Flange DN80 Pjdpfsycixgsx Ahvogi MATERIAL SPECIFICATION Feet material: Stainless steel

Condition: used, tank capacity: 530 l, GENERAL Design: vertical Remarks: handhole DN 200 Internal diameter: 790 mm Total height: 1,850 mm Max. overpressure: 3.2 bar Location: Bremen Nameplate: Vacuum: 1.0 bar Volume: 530 litres Product-contact material: V4A 1.4435 (AISI316) Condition: used Psdpfxeycixao Ahvsgi Cylindrical height: 850 mm Last application: biochemistry VESSEL Max. permissible operating temperature: 100 °C Base design: feet Number of feet: 3 pcs EQUIPMENT Manhole / Dome: handhole Outlet: 48 mm Note: slight residues MATERIAL Feet material: stainless steel

Condition: used, tank capacity: 715 l, GENERAL Equipment: Level indicator (without guarantee) Design: horizontal Remarks: 1 manhole with a 400 mm diameter in the front end Internal diameter: 790 mm Total height: 1,750 mm Total length: 2,100 mm Max. overpressure: 2.0 bar Location: Bremen Nameplate: Volume: 715 litres Product-contact material: V4A 1.4429 (AISI316) Condition: used Cylindrical length: 1,230 mm Last application: Biochemistry TANK Pgedpfx Aeyciwvehvji Max. permitted operating temperature: 200 °C Support type: feet Number of feet: 3 pcs EQUIPMENT Outlet: 43 mm Note: light residues, manhole cover plated MATERIAL SPECIFICATION Foot material: steel

Condition: used, tank capacity: 6,200 l, GENERAL Equipment: Lifting lugs Design: upright Outer diameter: 1,700 mm Total height: 3,400 mm Max. overpressure: 8.0 bar Location: Outdoor storage Nameplate: Volume: 6,200 liters Podpfx Ahoyciwcovegi Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,220 mm TANK Ends: Klöpper head Support type: Feet Number of feet: 4 pcs EQUIPMENT Manhole / Dome: in the cylinder Outlet: available Outlet: 40 mm MATERIAL PROPERTIES Feet material: Steel

Condition: used, tank capacity: 1,190 l, GENERAL Equipment: Crane lugs Design: Vertical Heating/cooling: Available Insulation: Available Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 4.0 bar Max. overpressure: 4.0 bar Agitator: Propeller Location: Outdoor storage Cylinder tempering: Double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,190 liters Double jacket volume: 105.0 liters Product-contact material: V2A 1.4301 (AISI 304) Pgsdpfsyciraex Ahvji Condition: Used Last application: Pharmaceutical TANK Max. permissible operating temperature: 150 °C Support type: Height-adjustable feet HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar INSULATION Insulation jacket: Hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Manhole / Dome: On upper head AGITATOR Agitator arrangement: Eccentric on upper head

Condition: used, tank capacity: 280 l, GENERAL INFORMATION Equipment: Spray head, crane lugs Design: vertical Remarks: Air-operated outlet valve Heating/cooling: available Insulation: available Max. permissible operating temperature: 130 °C Max. permissible operating overpressure: 6.0 bar Maximum excess pressure: 3.2 bar Agitator: Propeller Location: Bremen (available from mid-January 2026) Cylinder tempering: Double jacket Nameplate: Vacuum: 1.0 bar Volume: 280 liters Double jacket volume: 17.0 liters Product-contact material: V4A 1.4435 (AISI316) Condition: used TANK Max. permissible operating temperature: 130 °C Base design: mobile on castors HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar INSULATION Insulation jacket: hermetically welded Psdpfxjyciqpo Ahvegi Insulation jacket material: stainless steel EQUIPMENT Manhole / Dome: in the top cover Outlet: available AGITATOR Agitator arrangement: bottom-mounted

Condition: good (used), Pressure tester, pressure gauge, manometer, test manometer, compression gauge Pedpjycczuefx Ahvjgi -Manufacturer: TGL, pressure tester -Pressure range: 0 to 25 bar -Case dimensions: 330/200/H140 mm -Weight: 3.6 kg

Condition: good (used), Pressure tester, pressure gauge, manometer, test manometer, compression gauge -Manufacturer: Hydrotechnik Limburg, pressure tester -Pressure range: 2x 0 to 10 bar -Dimensions: 260/150/H205 mm -Weight: 3.2 kg Psdpjyccvfjfx Ahvsgi

Condition: used, Technical details: Type 1000/1500 Series Working pressure approx. 3–14 bar Spray volume approx. 1.2–2.6 l/min Operating temperature 95 °C in approx. 60 s Pjdoyhwiuspfx Ahvjgi 400V Heating power 14.4 kW Motor 2x0.45 kW Fresh water tank 60 L Concentrate tank 5 L

Year of construction: 1994, condition: good (used), Baljer Zembrod root reducer Pgedpfxsn Skz Ts Ahvoi with radio remote control

Condition: used, With this offer, you are purchasing a used flow cytometer ‘Beckman Coulter DxFLEX System B5-R0-V0’. Item for sale: 1 x Beckman Coulter DxFLEX System B5-R0-V0 with the following equipment: Manufacturer tested Podpfjxl Tv Hsx Ahvogi Includes laptop for use Condition: This offer is for a used device, which may show signs of wear. The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: good (used), Centering feed with toothed chain and 2 pressure rollers from above. Hydraulic / Pneumatic. Pressure rollers driven by oil motors. Pgsdpfonqzuyex Ahvoi Adjustable centering rollers. As infeed for resaw / multirip saw etc.

Condition: as good as new (ex-display), Year of construction: 2025, High-pressure cleaning unit, high-pressure jetting unit, high-pressure inbuilt cleaner mounted on a hot-dip galvanized and painted high-grade steel frame with forklift sleeves, suitable for installation in commercial vehicles. Similar to PTC Salmon but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo, etc. The following models are available: Salmon 60/200 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW Salmon 75/150 | 75 l/min at 150 bar | Engine: Vanguard 35 HP 26 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Vanguard 35 HP 26 kW Salmon 45/240 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW DIMENSIONS / WEIGHT: Dimensions without water tank (LxWxH): approx. 760 x 1,250 x 1,200 mm Dimensions with 400 l water tank (LxWxH): approx. 1,220 x 1,250 x 1,200 mm Dimensions with 800 l water tank (LxWxH): approx. 1,670 x 1,250 x 1,200 mm Dry weight without water tank: approx. 300 kg Dry weight with 400 l water tank: approx. 320 kg Dry weight with 800 l water tank: approx. 350 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW ENGINE: - Manufacturer: Vanguard - Model: 35 HP - Fuel: Petrol - Max. Power: 35 HP (26 kW) CONTROL PANEL: - Start button Pgedpjf Arugjfx Ahvei - Operating hours counter - Electronic fuel gauge - LED indicator for oil temperature - LED indicator for low oil pressure - LED indicator for clogged air filter - LED indicator for RPM - LED indicator for generator - LED indicator for spark plugs - Emergency stop button ELECTRICAL CONTROLS: - Hydraulic hose reel wind/unwind - Bypass On/Off - Speed control +/- - Emergency stop button - Switch to radio remote control INSTALLED ALARM: - Water shortage safety system to prevent the high-pressure pump from running dry with automatic shutoff. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve, and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: Electric hose reel - Material: Stainless steel - Capacity: max. 80 m ½” and 80 m 3/8" high-pressure hose - Hose: 80 m ½” high-pressure hose (included) - Hose guide: manual LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: Manual hose reel - Material: Stainless steel - Capacity: max. 35 m ¾” low-pressure hose - Hose: 35 m ¾” low-pressure hose (included) WATER FILTER: - With washable cartridge and drain valve. - Filtration grade: 50 mesh INCLUDED IN DELIVERY: - Multifunctional IMET radio remote control; - Engine On/Off; - Bypass On/Off; - Speed control +/-; - Hydraulic hose reel wind/unwind; - Emergency stop button; - Battery charger for remote control; - 300, 400, 500, or 800 l polyethylene water tank (with steel frame); OPTIONS ON REQUEST: - Pulsation/booster pump; - 50 or 60 m ½” high-pressure hose; - 50, 60, or 80 m 3/8” high-pressure hose with G3/4” connection; ACCESSORIES ON REQUEST: - STORZ kit for connection to a hydrant; - UNI 45 kit; - Version with 2 high-pressure reels; - Mobile hot water generator 10 kW – 12 VDC; - High-pressure spray gun kit with swivel joint and quick coupling; - High-pressure lance kit with fan nozzle 15° / rotating nozzle; - High-flow lance kit; - Rotating nozzle kit; - Twin-head nozzle kit; - Water sandblasting lance kit; - Detergent dispenser kit; - Step cleaning device; - Surface cleaner; - Sludge suction device (Venturi); - Pipe cleaning nozzles; - Further accessories upon request

Year of construction: 1995, condition: good (used), Stationary high-pressure pump unit URACA RS716E/400 on base frame for all cleaning and pressure testing tasks. Similar but no Hammelmann, Woma, Kamat Operating pressure: 400 bar Delivery rate: 56 l/min. Pgjdofl Dwmopfx Ahvji Drive speed: 1.475 RPM Drive power: 44 kW with SIEMENS 45 kW 3~motor 1LA6 223-4AA60 225M IP 55 with URACA MSÜV 16/700 and PSV8/800 valves Dimensions LxWxH: approx. 1300x1100x1400 mm weight: approx. 1.115kg Year of construction: 1995 Condition: in good used condition.

Condition: as good as new (ex-display), Year of construction: 2026, The CE08 series is an electrically powered high pressure cleaner. This model is the ideal tool for general cleaning jobs. Built into a stainless steel frame, this robust pressure washer is easy to move and can be equipped with various accessories such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Models available: ----- CE08-series L/min CE08-200 bar 15 7,5 hp water blaster unit 50Hz CE08-200 bar 15 7,5 hp water blaster unit 60Hz CE08-200 bar 15 7,5 hp water blaster unit 50Hz with start/stop CE08-200 bar 15 7,5 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 6.0 kW Pgedpjhf Nakjfx Ahvoi Volt: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Standard accessories included.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, High-Pressure Cleaning Unit, High-Pressure Jetting Unit, High-Pressure Built-in Jetting System on a hot-dip galvanized and painted high-quality steel frame with forklift pockets, suitable for installation in commercial vehicles. PTC Whale 36/210, 43/180 or 55/160, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Whale 30/250 | 30 l/min at 250 bar | Engine: Honda GX630 14.7 kW Whale 36/210 | 36 l/min at 210 bar | Engine: Honda GX630 14.7 kW Whale 43/180 | 43 l/min at 180 bar | Engine: Honda GX630 14.7 kW Whale 55/160 | 55 l/min at 160 bar | Engine: Honda GX690 17.7 kW DIMENSIONS / WEIGHT: Dimensions without water tank (LxWxH): approx. 650 x 1,000 x 1,030 mm Unladen weight without water tank: approx. 250 kg Dimensions & unladen weight with 300 l water tank: approx. 1,160 x 1,000 x 1,030 mm & approx. 280 kg Dimensions & unladen weight with 500 l water tank: approx. 1,260 x 1,000 x 1,030 mm & approx. 300 kg HIGH-PRESSURE PUMP: - Manufacturer: COMET - Model: TW 13022S Premium ENGINE: - Manufacturer: Honda - Model: GX 690 - Fuel: Petrol - Cooling: Air - Cylinders: 2 - Displacement: 688 cm³ - Max. output: 24 hp (17.7 kW) - Max. engine speed: 3,600 rpm TRANSMISSION: Gearbox housing CONTROL PANEL: - Ignition key - Hour meter - Electronic fuel gauge - LED indicator for low oil pressure - Emergency stop button INSTALLED ALARM: - Water shortage protection to prevent high-pressure pump running dry, with automatic shut-off function. SAFETY AND PRESSURE CONTROL VALVES: - The unit is equipped with a safety valve, a pressure regulating valve, and a manometer. HIGH-PRESSURE HOSE REEL: - Type: manual hose reel - Material: stainless steel - Capacity: max. 60 m ½” high-pressure hose - Hose: 50 m ½” high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: manual hose reel - Material: stainless steel - Capacity: max. 35 m ¾” low-pressure hose - Hose: 35 m ¾” low-pressure hose (included) FUEL TANK: - Capacity: approx. 13 l WATER FILTER: - With washable cartridge and drain valve - Filtration: 50 mesh SCOPE OF DELIVERY: - IMET multifunction radio remote control; - Engine On/Off - Bypass On/Off - Electronic speed control +/- - Emergency stop button - Battery charger for remote control - 300, 400 or 500 l polyethylene water tank OPTIONS ON REQUEST: Psdpodqmttofx Ahvjgi - 60 m ½” high-pressure hose - Pulsation/booster pump - Second high-pressure hose reel - Electric high-pressure hose reel (requires connection to vehicle battery) ACCESSORIES ON REQUEST: - STORZ kit for hydrant connection - UNI 45 kit - Mobile hot water generator 10 kW – 12 VDC - High-pressure spray gun kit, swivel and quick coupling - High-pressure lance kit with 15° flat jet nozzle / rotary nozzle - High-flow lance kit - Rotary nozzle kit - Twin-head nozzle kit - Water sandblasting lance kit - Detergent dispenser kit - Step cleaning device - Surface cleaner - Sludge suction device (Venturi) - Pipe cleaning nozzles - Further accessories available on request

Year of construction: 2020, operating hours: 1 h, condition: new, - Pressure washer PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam similar but no Dynajet, Oertzen, Falch, ... - cold water / hot water / steam 32 bar up to 140°C / high pressure steam 150 or 200 bar up to 150°C for cleaning and disinfection Psdsfh Skajpfx Ahvjgi The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min. at 150 bar - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min. at 200 bar - Dimensions and empty weight : 110x64x98cm, approx. 150kg - incl. 10 m high pressure hose, spray gun, lance and flat jet nozzle 25°.

Condition: used, tank capacity: 500 l, GENERAL INFORMATION Construction type: upright Remarks: Slight variations in the design of the containers, e.g., 2 containers are mobile on castors, the rest are on fixed V2A frames; maximum pressure in some cases up to 3 bar; variations in the connections on the manhole cover; overall height is in part slightly lower (depending on the connections on the manhole cover) Inner diameter: 800 mm Total height: 1,780 mm Max. overpressure: 2.5 bar Support type: Frame Location: Bremen Nameplate: Volume: 500 liters Pedoxqc Hrspfx Ahvogi Product-contact material: V4A 1.4435 (AISI316) Condition: Used Previous application: Pharmaceutical EQUIPMENT Manhole / Dome: on the top head (DN 400) Outlet: present MATERIAL SPECIFICATION External surface: ground Internal surface: ground

Condition: used, Year of construction: 1998, operating pressure: 100 bar, overall weight: 590 kg, rotational speed (max.): 600 rpm, power: 30 kW (40.79 HP), URACA high-pressure pump unit Type: RS606E/100 URACA 3-plunger pump KD606 Flow rate: 138 l/min with 30 kW electric motor Psdpfsv Hqpqsx Ahvegi

Condition: used, digital gauge Digibar Pgodjcf Rb Topfx Ahvji is suitable for measuring static and quasi-static fluid and gas pressures. PE 100 is the battery version.

Year of construction: 2023, condition: excellent (used), functionality: fully functional, pressure: 0.17 bar, Dear measurement engineers, Pedpfeyfw Sasx Ahvogi We are selling several 32-port 2.5 PSI pressure scanners from Chell, a benchmark in pressure measurement alongside Scanivalve and PSI Systems. Ideal for use in laboratories, flight test campaigns, wind tunnels, turbomachinery testing, and similar aerodynamic test setups.

Year of construction: 2024, condition: new, functionality: fully functional, pressure: 0.34 bar, Dear measurement technicians, we are selling two 5 PSI Pressure Scanners from Chell, which—alongside Scannivalve and PSI Systems—set the standard in pressure measurement. Ideal for laboratory applications, flow experiments, wind tunnels, turbomachinery testing, and similar aerodynamic test setups. Podpfxjyfw Rps Ahvsgi