Used Pressing Table for sale (25,844)

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Gbsdpfx Anoy R Nnfs Rjl Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: used, functionality: fully functional, This listing is for a second-hand ‘Schulze Air 4 Press’ pneumatic rotary press Condition: This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The unit has been tested for functionality Packaging and shipping: You are welcome to view the unit during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. Gbjdpfx Aoy R Nm Ujn Rel For further information, you are of course welcome to contact us directly.

Condition: new, Year of construction: 2025, pressure 060 t stroke 350 mm Gsdpfx Ansxu Nvzs Rjbl table surface area 750x344 mm dayligth 197/750 mm distance between columns 750 mm diameter of piston 75 mm

Condition: new, Year of construction: 2025, pressure 100 t stroke 380 mm Gbsdoxu Nv Iopfx An Rsl table surface area 1100x424 mm dayligth 180/750 mm distance between columns 1100 mm diameter of piston 90 mm

Condition: new, Year of construction: 2022, pressure 55 t Gsdpfx Ajwp Tcqsn Rjbl stroke 37 Min./20 mm throat 500 mm stroke max. 60 mm work height max. 1060 mm total power requirement 5 kW

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Features and technical data: - Clearly arranged controls - Ideal working height - Large opening - Full access from all four sides Gbjdpfey R Haxex An Rol - Push-button control - Stop button - Safety line – emergency stop (E-STOP) accessible from any position - Timer with acoustic signal - Automatic pressure switch - Automatic temperature control system - Infinitely variable stroke limitation - Heavy-duty rack compensation - Energy-saving mode as standard - Switchable side cylinders - Total pressing force: 120 tons - Plate dimensions: 3000 x 1350 mm - Number of cylinders: 6 - Piston diameter: 85 mm - Max. opening/stroke: 400 mm - Closing time: approx. 16 sec - Heating time to 80°C (from room temperature): approx. 14 min - Maximum permitted operating temperature: 140°C - Total connected load: 20.1 kW - Hydraulic power: 1.21 kW - Circuit breaker: 35 A - Dimensions: 3500 x 1610 x 2000 mm - Total weight: 6200 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Eccentric Press, Köszeg (Elzett) 6.3 Tons, Used Machine Manufacturer: Köszeg (Elzett) Overall dimensions: Width: 600 mm Depth: 800 mm Height: 1600 mm Weight: 252 kg Pressing force: approx. 6.3 tons Stroke length: 130 mm Gedpfxey R Eb Is An Rjbl Table size: 280 × 170 mm

Condition: used, Eccentric Press, MABU-PRESSEN 6 TF, Used Machine Manufacturer: MABU-PRESSEN Maschinenfabrik K. Burkard KG Type: 6 TF Overall dimensions: Width: 700 mm Depth: 770 mm Height: 1570 mm Weight: 310 kg Year of manufacture: 1973 Pressing force: 6000 kg (6 tons) Stroke length: 6 / 60 mm Stroke rate: 220 strokes/minute Required motor power: 0.7 PS Gjdpoy R Ebujfx An Rebl Table size: 400 × 215 mm

Condition: new, CATALOG NUMBER RE022 – New, ex-demo machine – Complete DTR documentation + CE certificate – Cutting width at the fence: 1300 mm – Main motor power: 6 kW TECHNICAL DATA - Saw blade tilt: 0-46˚ - Main motor power: 6 kW - Sliding table cutting length: 3000 mm Gedpfxsy R Duas An Rjbl - Main spindle speed: 3500/4500 rpm - Spindle diameter: 30 mm - Main blade diameter: 300–400 mm - Max. scoring blade diameter: 125 mm - Scoring saw motor power: 0.75 kW - Scoring saw speed: 8500 rpm - Scoring saw spindle diameter: 20 mm - Cutting width at the fence (standard 1050 mm, option 1300 mm): 1300 mm - Cutting width using stops on the auxiliary table: 215–3200 mm - Cutting height for 300 mm blade 90°/45°: 90/60 mm - Cutting height for 350 mm blade 90°/45°: 115/80 mm - Cutting height for 400 mm blade 90°/45°: 140/95 mm - Extraction port diameter: 80 mm, 125 mm - Dimensions (L/W/H): 3300/3460/1500 mm - Weight: 750 kg Optional equipment: – Mitre fence with aluminium rail Net price: 39,000 PLN Net price: 9,390 EUR Price calculated at an exchange rate of 4.15 PLN/EUR (In case of significant exchange rate fluctuations, the price may change) All prices are net prices. Net price applies for international transactions and EU customers with a valid EU VAT number.

Condition: used, Eccentric Press, Crank Press, Ateliers Soenen 15T, Used Machine Manufacturer: Ateliers Soenen Type: Presse à Excentrique 15 Tonnes Overall dimensions: Width: 620 mm Depth: 900 mm Height: 1680 mm Weight: 581 kg Gsdsy R A Avspfx An Robl Pressing force: 15 tons Stroke length (adjustable): between 10 mm and 50 mm Connecting rod adjustment: 30 mm Stroke rate: 130 strokes/minute

Condition: used, Positioning table, welding rotator, rotary work table, Used machine Manufacturer: Weiss GMBH Type: TC 700 T Gsdpfoypvmkex An Rjbl Overall dimensions: Width: 1020 mm Depth: 870 mm Height: 740 mm Weight: 865 kg Electrical specifications: 400V; 6.8A; 3.34 kW Table diameter: 700 mm

Condition: good (used), Year of construction: 2002, functionality: fully functional, stroke length: 365 mm, throat depth: 410 mm, Hydraulic Press Brake Make: TRUMPF Model: TrumaBend V85 Year: 2002 Technical Specifications Manufacturer: Trumpf Model: TrumaBend V85 Year of manufacture: 2002 Press force: 85 t Stroke: 365 mm Bending length: 2050 mm Frame gap: 1750 mm Throat depth: 410 mm Table width: 120 mm Working height: 1050 mm Dimensions (approx.): L 2.6 x W 1.80 (plus 0.5 m support arms) x H 2.90 m Weight: approx. 9,050 kg Equipment • Control: Delem DA 2D Graphic • 2 movable support arms • Pneumatic die shifting • Hydraulic tool clamping, top and bottom • CNC-controlled crowning • Controlled axes: X1, X2, R1, R2, Z1, Z2 • Gooseneck upper tool, 86°/R1, H 120 mm, L = 1,960 mm, segmented Gjdsy R Arkepfx An Rjbl • Straight upper tool OW202/K 28°/R1, H 120 mm, L = 1,935 mm, segmented • Lower tool V10/84°, R1, H 100 mm, L = 2,050 mm, segmented • Lower tool V24/80°, R 2.5 mm, H 100 mm, L = 2,000 mm, segmented • Lower tool V16, L = 1,000 mm • Lower tool V30, L = 500 mm All information without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: new, Year of construction: 2025, load capacity: 1,000 kg, lifting height: 800 mm, fuel type: electric, empty load weight: 140 kg, NEW price includes delivery in the Netherlands and Belgium! Semi-electric scissor pallet truck Brand: Total Source Year of manufacture: 2025 Capacity: 1,000 kg Lifts up to a height of 800 mm Manual drive Electric lifting Equipped with a 12V battery Built-in charger Gbodpfx Anjy R Aghe Rjl

Condition: good (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 600 mm, fuel type: electric, empty load weight: 208 kg, Semi-electric scissor pallet truck Brand: JUNGHEINRICH Year of construction: 2018 Capacity: 1,000 kg Lifting height: up to 800 mm Manual travel Electric lifting Equipped with a 12V battery Internal charger Fork dimensions: 560 x 1150 mm Gbjdpfx Anoy R Abrj Rel

Condition: good (used), Work table with T-fixing cuttins Gbsdpfx Ask E Hbzsn Rel Overall size:1500x1200x800 mm Weight: 2820 kg

Condition: ready for operation (used), T-slot assembly table, T-slot table, T-slot welding table, Used machine Overall dimensions: Length: 740 mm Width: 550 mm Gbodpfxev Il Evj An Rel Height: 540 mm Weight: 398 kg T-slot size: 50 x 20 mm Worktable size: Upper part: 660 x 550 mm Side part: 650 x 400 mm Worktable tiltable at 90˚

Condition: used, Rotary table, welding rotator, IMA MA Retainer AK2, Used machine Gedpfexupz Dsx An Rsbl Manufacturer: IMA Automation GMBH Type: MA Retainer AK2 Overall dimensions: Width: 1480 mm Depth: 1480 mm Height: 1620 mm Electrical data: 400V; Table diameter: 860 mm

Condition: used, Turntable, welding rotator, Bettinelli TR 210, Used machine Manufacturer: Bettinelli s.p.a. Italy Type: TR 210 Overall dimensions: Width: 950 mm Depth: 950 mm Gbodjxxk H Aopfx An Rjl Height: 830 mm Electrical data: 400V; 1.1 kW; 5.9A; 900 rpm Table diameter: 950 mm

Condition: ready for operation (used), T-Slot Table, T-Slot Worktable, T-Slot Fixture Table 3000 x 1750 mm, Used Machine Overall Dimensions: 3000 x 1750 x 350 mm Slot Size: 65x27 mm Godpfev R Dqvsx An Rjbl Weight: 3500 kg

Condition: ready for operation (used), agnetic table, magnetic work table, used machine Overall dimensions: Length: 1500 mm Width: 500 mm Height: 80 mm Weight: 420 kg Electrical specifications: 55V DC Godpeu T H Nnjfx An Robl

Condition: used, Friction press, flywheel press, forging press, screw press, used machine Manufacturer: ASJ Type: J53-160B Overall dimensions: Width: 1850 mm Depth: 1380 mm Height: 3140 mm Weight: 8190 kg Table size: 560 × 510 mm Gbedpfxjxpf U As An Rsl Clear opening without table: 560 × 560 mm Clear opening with table: 260 mm Nominal pressure: 160 tons Stroke length: 360 mm

Condition: ready for operation (used), Hydraulic press, four-column press, Eitel 100T Manufacturer: EITEL Godpfxouhl E Re An Rebl Pressing force: 100 tons Overall dimensions: 1900x1100x3300mm Table size: 1050x800mm Stroke length: 400mm

Condition: ready for operation (used), Hydraulic Press Machine, Coil Winding Press Machine, Used Equipment Dimensions: 1340 x 1240 x 2740 mm Weight: 640 kg Electrical Specifications: 400V Hydraulic Pressure: 100 bar Godpfx Aneu Hkfpe Rebl Stroke Length: 180 mm

Condition: ready for operation (used), Design: vertical press with four columns. Gjdpfx Ajtty Nkon Robl The vertical press platen is driven by an electric motor, the lower platen can be pulled out with the tool. -Dimensions: 2100x1600x3000mm -plate size: 950x1120mm -Electrical data: 380V; 43A; 22kW

Condition: used, Press machine, REMS Power-Press XL ACC, used equipment Manufacturer: Rems Type: Power-Press XL ACC Pressing range: Ø 10 – 108 mm (up to 110 mm) Pressing force: 32 kN Motor: 450 W universal motor Power supply: 230 V or 110 V, 50–60 Hz Weight: approx. 5.5 kg Dimensions (H x W x D): 800 x 335 x 230 mm Cable length: 2900 mm Accessories: more than 400 types of REMS pressing jaws, adapters for other manufacturers Additional features: Automatic retraction (Automatic Circuit Control – ACC) Rotatable pressing jaw holder with automatic lock Compatible with pressing jaws from other manufacturers Fast pressing, e.g., Geberit Mapress stainless steel Ø 108 mm connection in 15 seconds Gbjdpfx Aexlp T Isn Rsl Press jaws: 76.1; 88.9; 108 mm