Used Press-Fit Machine for sale (93,600)

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Table height: 940 mm Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Ndodpfx Absrzfh Hogod Very good condition

Condition: ready for operation (used), Maximum forming capacity at full length: 9 gauge (mild steel), corresponds to approx. 3.8mm, max. forming length: 3200mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed: 91.44 mm/s, downwards: 39.88mm/s, bending speed: 1879.6mm/s, bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160mm/2220mm/1780mm, weight: approx. 5300kg. Nedpfx Abotia Hhsgodd

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: div., 2x ROLLEX ironing presses, for pre-ironing (PRE-IRON); working width: 2.25 m, Njdpfjwpi Rksx Abgsdd Washing machine / dryer set Washing machine Milnor; load capacity: 65 kg; year: 2004 + Dryer Kannegiesser; load capacity: 50 kg; year: 2005 + Dryer Passat; load capacity: 50 kg; year: 1984

Condition: new, Year of construction: 2025, drop-through hole in table: 220 mm, table width: 750 mm, table length: 1,000 mm, stroke adjustment: 140 mm, pressing force: 130 t, ram bore: 55 mm, punching force: 130 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD EQUIPMENT Ndedpfx Absvtyvgjgsd • Steel Construction Frame • Gear Unit Operating in Sealed Oil Bath • Four-Sided Bearing Alignment • Nodular Cast Iron Connecting Rod and Crank Bearings • Crankshaft and Drive Shafts Manufactured from 4140 Tempered Steel • Centralized Fully Automatic Grease Lubrication System • Pneumatic Clutch and Brake System • CE-Conformant Safety Standards • Dual-Base Safety Valve • Manually Adjustable Stroke • Photocell Safety Light Curtain • PLC Control System • Touchscreen LCD Panel (for 150-300 ton models) • Dual-Hand Safety Pedal Control System • Mechanical Safety Fuse System • Hydraulic Safety Fuse System (for 200-300 ton models) • Emergency Reverse Motor Motion • Complies with Occupational Health and Safety Regulations • Anti-Vibration Mounts • CE Certified • Models Available from 20 Tons to 300 Tons • 24-Month Warranty • Country of Origin: Turkey TECHNICAL SPECIFICATIONS CECP 130 C-TYPE MONOBLOCK FRAME Capacity: 130 Ton Throat Depth: mm Table-to-Ram Distance: 475 mm Ram Adjustment: 80 mm Press Width: 1600 mm Press Depth: 2000 mm Press Height: 3000 mm Table Hole Diameter: 220 mm Table Dimensions: 750 x 1000 mm Die Tie Rod Hole Diameter: 55 mm Ram Face Dimensions: 350 x 550 mm Table Height from Floor: mm Stroke: 20 – 140 mm Strokes per Minute: 45 spm Motor Power: 7.5 kW Motor Speed: 1400 RPM Weight: 6,000 kg • As a manufacturer, technical specifications may be modified upon request.

Condition: good (used), Schuler PE4s 50/800 high-speed press  Ndsdpegryc Njfx Abgsd Manufacturer: Schuler   Type: PE4s 50/800 High speed press 61/21 600/3 pressing force: 50 t throat depth: 800 mm Stroke rate /min: 125-300 slide stroke: 40 mm Kohler decoiler 500.1 M After the purchase you will also get the documentation We sell a large number of paternosters. In addition to approx. 50 paternosters, there are countless other machines available. After purchase the amount is due within 7 working days. Please also note our other offers. Have fun browsing and buying. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: as good as new (ex-display), Year of construction: 2023, Press-in machine with automatic feed via conveyor bowl Ndsdpfx Ajld Throbged Automatic feeds from above and below available. Touchscreen control with database for press-in pressure/fastener-dependent Thrust 450 mm Press-in force 56 kN Suitable for self-clinching fasteners up to M8/M10

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Nsdjhmmfkepfx Abgodd Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: ready for operation (used), Press Machine, Traveling Head Cutting Machine, Punching Machine, Stamping Press, Hydraulic Gantry Press,Sanson Chiesa Turbo, Used Machine Ndodpfx Abeukpcyegod Manufacturer: Sanson Model: Chiesa Turbo Overall Dimensions: 3480 x 1040 x 2420 mm Weight: 5500 kg Electrical Data: 380V, 50 Hz Working Cylinder Diameter: 250 mm Operating Pressure: 200 bar Stroke Length: 120 mm Pressing Surface: 900 x 1000 mm Cutting Table: 1040 x 2500 mm

Condition: excellent (used), Konica Minolta Accurio Press 6120 with 3 million copies in perfect condition, tested and ready to print! Equipment: PF 710 x 2 RU 510 FS 532 As an experienced retailer of used copiers, we have developed a real expertise in packing and pallet shipping, to guarantee our customers machines in perfect condition upon receipt. We ship copiers coming from, and maintained by Konica Minolta France. If you have any questions don't hesitate to ask me Our company offers the largest range of Konica Minolta production copiers, and handle world-wide deliveries on request. Ndodsvrd A Uopfx Abgod Please do not hesitate to contact us for further information.

Condition: new, Year of construction: 2025, throat depth: 370 mm, table width: 700 mm, table length: 1,200 mm, pressing force: 300 t, power: 30 kW (40.79 HP), punching force: 300 t, warranty duration: 24 months, Equipment: safety light barrier, C TYPE ECCENTRIC PRESSES GENERAL FEATURES - Steel construction frame - Stress relief on the frame and welded parts by vibration - Table-to-table parallelism and perpendicularity tolerance in accordance with ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Ram supported by 4 guides - Parts such as ram, connecting rod, and slide block are made of cast steel, GS52 - High-strength one-piece crankshaft – 4140 - Bronze bushings in the connecting rod (Zr14) - Equipped with spare bolster table - Table-to-ram adjustment by ratchet gear (motorized for 150 tons and above) - Manual central lubrication - Pneumatic foot pedal with locking and time-controlled dual hand control - Electric counter - PLC application and touchscreen – DELTA - Electric switching components from SIEMENS-SCHNEIDER - CE application OPTIONAL - Finger protection light barriers – SICK, LEUZE - Safety PLC (controls entire electric system, valves, dual control, and pedal) – PILZ - Dual-coil safety valve – GPA, TOPAIR - Lockable limit switch and control panel - Safety block - Protective guards in accordance with CE regulations TYPE C TYPE MONOBLOC FRAME Capacity 300 Ton Throat Depth 370 mm Table-to-Ram Distance 530 mm Slide-to-Table Distance 650 mm Distance Between Walls 470 mm Ram Adjustment 150 mm Approx. Press Width 2000 mm Approx. Press Depth 2700 mm Approx. Press Height 3200 mm Front Anchor Size 940 mm Side Anchor Size 1440 mm Table Hole Diameter 260 mm Table Size 700 / 1200 mm Nsdpfxew E Rkqs Abgsdd Die Mounting Hole Diameter 60 mm Ram Size 780 / 400 mm Table Height from Ground 810 mm Stroke Adjustment 20 / 200 mm Strokes per Minute 38 spm Motor Power 30 + 2.2 kW Motor Speed 1450 RPM Approximate Weight 13,200 kg

Condition: reconditioned (used), functionality: fully functional, Drilling and pressing machine for all types of furniture fittings, rows of holes and hole group drilling machine in system 32 Power connection 400V 0.75kW Spindle speed 2800 rpm Stop ruler 960 mm 2x swivel stop for drills with shaft diameter 10 mm Workpiece thickness max. 40 mm 1x 7-spindle drilling head for row of holes, pitch 32 mm with integrated pins Manual feed Base Ndsdpfx Aboumw Sbjged at an additional cost Olive drilling head €450.00 Mepla drilling head with pressing die €550.00 Hettich drilling head with pressing die €550.00

Condition: used, Casing-In / Bucheinhängemaschine - Buchformpresse / Book Forming Press Kolbus EMP - FE Year 1966 Block size min. 125 x 100 x 6mm / max. 370 x 270 x 80mm Case size min. 125 x 210mm / max. 370 x 62 mm Speed up to 36 cycles per minute Ndodpfjvuaqyox Abgod Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Bending tool, die, lower knife, lower tool, lower beam, Nsdecn Rd Repfx Abgodd -Tool: for folding machine -Widening: for lower cheek -Dimensions: 33/76/3040 mm -Bore distance: 280 mm -Hole diameter: 18 mm -Length: 3040 mm -Weight: 33 kg

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm Njdpfxsu R Sxxe Abgjdd - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: ready for operation (used), Konica Minolta Accurio Press with 1.1 million copies in perfect condition Tested and ready to work ! Equipment : - PF 710 - RU 510 - FS 532 As an experienced retailer of used copiers, we have developed a real expertise in packing and pallet shipping, to guarantee our customers machines in perfect condition upon receipt. Ndedpsr H Equjfx Abgod We ship copiers coming from, and maintained by Konica Minolta France. If you have any questions don't hesitate to ask me Our company offers the largest range of Konica Minolta production copiers, and handle world-wide deliveries on request. Please do not hesitate to contact us for further information.

Condition: new, Year of construction: 2025, throat depth: 350 mm, drop-through hole in table: 250 mm, table width: 1,100 mm, table length: 700 mm, stroke adjustment: 190 mm, pressing force: 250 t, ram bore: 60 mm, power: 22 kW (29.91 HP), punching force: 250 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD HARDWARE Below are the technical specifications and general features for the 250-300 ton C-type eccentric press you inquired about. - Welded steel construction frame - Stress-relieved and welded components by means of vibration - Parallelism and rigidity tolerance between tables in compliance with ISO and DIN standards - Pneumatic clutch and brake combination - OMPI (Italy) - Components such as ram, connecting rod, worm gear, in steel casting GS52 Ndjdpfxjvtyy Se Abgod - High-strength solid crankshaft – 4140 grade - Connecting rod lined with bronze (Zr14) - Spare bolster plate - Mechanical interlock safety device - Ratchet mechanism for bolster/table adjustment - Manual central lubrication system - Pneumatic pedal with lock and dual control, adjustable timing - Electric stroke counter - PLC integration and production line display – DELTA - Electrical switchgear components by SIEMENS and SCHNEIDER - CE conformity - Finger protection light curtains – SICK, LEUZE, KEYENCE - Safety PLC (oversees all electrical systems, valves, dual and pedal systems) – PILZ - Dual solenoid safety valve – GPA - Locked position switch and control panel - Mechanical safety wedge - CE-compliant protective enclosures TECHNICAL SPECIFICATIONS Type: C-TYPE MONOBLOCK FRAME Capacity: 250 Tons Throat Depth: 350 mm Table-to-Ram Distance: 520 mm Table-to-Guide Distance: 630 mm Frame Width: 520 mm Ram Adjustment: 150 mm Press Width: 2000 mm Press Depth: 2500 mm Press Height: 3100 mm Front Mounting Holes: 930 mm Side Mounting Holes: 1430 mm Table Bore Diameter: 250 mm Table Dimensions (W x L): 700 x 1100 mm Die Tie Rod Hole Diameter: 60 mm Ram Face (W x L): 670 x 380 mm Table Height from Floor: 810 mm Stroke: 20 - 160 mm Strokes per Minute: 40 spm Motor Power: 22 + 2.2 kW Motor Speed: 1450 RPM Weight: 12,000 kg *As a manufacturer, technical specifications are subject to change upon request. OPTIONAL EQUIPMENT (NOT INCLUDED IN PRICE) - 8-point slide adjustment & hydraulic safety system - Speed control - Automatic lubrication system

Condition: good (used), Year of construction: 1995, Pot hole boring machine Grass ECO Press Year of manufacture 1995 S/N 9502665 in good condition right and left linear guide (work table can be supplied ) Njdpfx Abok D T Ncogodd weight approx. 45 kg 380 V - 50 Hz - 2,5 A pneumatic connection - max 6 bar CE marked

Condition: used, Year of construction: 1981, machine/vehicle number: 9, Anpapp-Presse und Falzeinbrennmaschine Schmedt PräForm HHS 20 Case Press and Joint-Setting machine Schmedt PräForm HHS 20 Baujahr / Year 02/1981 - Serial-Nr. 09 Buchhöhe / Book height: 100 - 520mm Buchbreite / Block width: 120 - 400mm Blockstärke / Block tickness:: 8 - 100mm Leistung / Output: ca. 150 St/h Pressluftanschluss / Air supply: 6bar Ndodpfx Absrmul Dogjd Elektrischer Anschluss / Power supply: 230V / 50Hz / 2.0kW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Bending tool, die, upper knife, upper tool, upper beam, goat-foot rail -Tool for folding machine -Pointed tool -Dimensions: 45 x 120 mm Nsdpfx Absb A Swlegsdd -Length: 800 mm -Weight: 19 kg

Condition: like new (used), -----Konica Minolta Accurio Press C 6100 with 554 495 copies----- ----- Color parts like new this machine has only 3630 print in color !!!!! ----- Tested and ready to work ! Equipment : - IC 313 - PF 711 - PF 707 m - RU 513 - FS 532 Nsdor H H D Aepfx Abgsdd As an experienced retailer of used copiers, we have developed a real expertise in packing and pallet shipping, to guarantee our customers machines in perfect condition upon receipt. We ship copiers coming from, and maintained by Konica Minolta France. If you have any questions don't hesitate to ask me Our company offers the largest range of Konica Minolta production copiers, and handle world-wide deliveries on request. Please do not hesitate to contact us for further information.

Condition: new, Year of construction: 2025, pressing force: 100 t, table width: 670 mm, table length: 950 mm, drop-through hole in table: 180 mm, power: 7.5 kW (10.20 HP), punching force: 100 t, ram bore: 45 mm, stroke adjustment: 120 mm, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • STEEL CONSTRUCTION BODY • 4-SURFACE BEARING RECORD • DUCTILE IRON CONNECTING ROD AND ANGLE BEARINGS • CRANKSHAFT AND TRANSMISSION SHAFTS 4140 STEEL STEEL • CENTRAL SYSTEM FULLY AUTOMATIC GREASE LUBRICATION • PNEUMATIC CLUTCH AND BRAKE COMBINATION • COMPLIANT WITH CE SAFETY DIRECTIVES • DOUBLE COIL SAFETY VALVE • MANUAL ADJUSTABLE STROKE • AUTOMATIC ADJUSTABLE STROKE BETWEEN 150-300 TONS • PHOTOCELL PROTECTION CURTAIN • PLC CONTROL SYSTEM • TOUCH LCD SCREEN BETWEEN 150-300 TONS • DOUBLE-HAND PEDAL CONTROL SYSTEM • MECHANICAL INSURANCE SYSTEM Nsdpsvtx Inefx Abgjdd • HYDRAULIC INSURANCE SYSTEM BETWEEN 200-300 TONS • EMERGENCY REVERSE MOTOR MOVEMENT • IN ACCORDANCE WITH OCCUPATIONAL SAFETY REGULATIONS • VIBRATION PREVENTIVE WEDGE • COUNTRY OF ORIGIN: TURKEY • WARRANTY PERIOD: 24 MONTHS • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. TECHNICAL SPECIFICATIONS: PRESSURE (TON) 100 STROKE ADJUSTMENT RANGE (MM) 10-120 NUMBER OF STROKES PER MINUTE (D/MIN-RPM) 50 RAM - REGULATION RANGE (MM) RAM - TABLE DISTANCE (MM) 450 LOWER TABLE DIMENSIONS (MM) 670X950 LOWER TABLE HOLE DIAMETER (MM) 180 RAM TABLE DIMENSIONS (MM) 350X530 RAM MOLD EYEBALL DIMENSIONS (MM) 45 MOTOR POWER (KW) 7.5 WEIGHT (KG) 4600 MACHINE DIMENSIONS (MM) (H - W - L ) • SINCE WE ARE A MANUFACTURER CHANGES CAN BE MADE IN TECHNICAL SPECIFICATIONS IF REQUESTED.

Condition: used, Year of construction: 2000, machine/vehicle number: 124, Falzeinbrenn- und Abpressmaschine - Book press and joint-setting machine Zechini CIMATICYear 2000 - Serial-No. 124/00 Buch Format max. Buchhöhe 48cm x Buchbreite 35cm x Buchblockstärke 9cm Book Size max. height 48cm x width 35cm x thickness 9cm Leistung max 150 in St./h / Output 150 pcs/h Pressluftanschluss 6 bar / Air pressure supply 6 bar Online-Video-Inspection by Skype-Video Nedpfx Aeh Ayanjbgodd We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Bending tool, die, upper knife, upper tool, upper beam Nedpfocn Shrex Abgsdd -Tool: for folding machine -Dimensions: 60 x 15 mm -Length: 1020 mm -Weight: 6 kg

Condition: new, Year of construction: 2024, overall weight: 1,140 kg, tool height: 200 mm, operating speed: 10 mm/s, total length: 1,300 mm, total height: 1,300 mm, total width: 600 mm, reverse speed: 10 mm/s, working height: 935 mm, table width: 600 mm, table length: 1,200 mm, stroke length: 290 mm, pressing force: 40 t, Equipment: emergency stop, STANDARD ACCESSORIES Ergonomic Tool Clamping Table Hydraulic Speed and Pressure Adjustment Easily Adjustable Back Gauge Induction Hardened Support Pins NC Control Easy Tool Change MODEL HP 40 Njdst H Sxcopfx Abgjdd Max Pressure At 200 Bars ton 40 Bending Capacity Flat Material mm 250×16 Max Stroke mm 300 Height Of Toolings mm 250 Working Speed mm/sec 10 Motor Power kw 4 Net Weight kg 1190

Condition: used, Bending tool, die, lower knife, lower tool, lower beam -Tool: for folding machine -Widening: for lower cheek Nedpfx Abecn Shuogsdd -Dimensions: 59 x 19 mm -Length: 1452 mm -Weight: 10 kg