Used Press Rolls for sale (18,887)

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Bedpfxow Sgnks Acnedg Available: at short notice

Condition: good (used), Year of construction: 1981, machine/vehicle number: 022-009-36, Offer 24374 Bodpfx Acoxuhzcsnedg Technical Data: - Max. pressing force: 100 t - Max. ram stroke approx.: 500 mm - Stroke speed: 25 mm/sec - Return speed: 125 mm/min - Installation height approx.: 1000 mm - Throat depth (to ram center): 380 mm - Ram clamping surface: 530 x 400 mm - Ram clamping pin: 40 mm - Table size: 750 x 560 mm - Table bore / through-hole: 200 mm - Table height above floor: 720 mm - Oil capacity approx.: 200 ltr - Drive: 400 V / 11 kW - Space requirements approx.: W 1150 x H 3250 x D 1850 mm - Weight approx.: 4600 kg

Condition: used, The scope of delivery includes: 01x shelf grate, used Material color: hot-dip galvanized Total depth: approx. 2,520 mm (support bar direction) for double shelf rows: 2x 1,100 mm Bdsdpsvvhglsfx Acnjg Inner depth: approx. 2,517 mm Total width: approx. 1,120 mm (cross bar direction) Support bar dimensions: 30|1.50 mm Frame height: approx. 30 mm Mesh width: approx. 68 x 45 mm Weight | piece: approx. 30.83 kg Internal designation: GR-114 Note: The grate may have damage, scratches, dents, welds. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: new, Year of construction: 2026, neu 2026 070240 Oktober 2026, Zwiswchenve Türkei 8300 € 160.19 € 1 100 to horizontal verschiebbar Bdedpfx Aewirtzscnsg 300 mm 1070 mm 5 mm/s 10 mm/s 2110 mm 1000 mm 2430 mm 1500 kg demo machine / mint condition net price (price for new machine € 9.000,00) horizontally displaceable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, power: 294 kW (399.73 HP), fuel type: diesel, overall weight: 32,000 kg, tire size: 315/80R22.5, axle configuration: 8x4, wheelbase: 4,250 mm, brakes: constant throttle, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Croatia, Kz. Haus, 1 air seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, automatic transmission, differential lock, fog lights, leaf-air suspension, air and light connections for trailer hitch, aluminum tank, 2-axle front-wheel steering, hydraulic transverse locking, green environmental badge. Wheelbase: 4250 mm, Body: 26t Hyva T26-55-S roll-off system for containers from 4.3m to 6.6m, frame height approx. 1160mm! Frame length approx. 6200mm! Location: Trgo-Auto d.o.o. Matoseva 86 0 Solin Bdedexb Ek Iopfx Acnjg Hrvatska / Croatia / Kroatien ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: good (used), functionality: fully functional, stroke length: 300 mm, throat depth: 450 mm, controller manufacturer: Delem, controller model: DA65, working width: 4,300 mm, bending force (max.): 300 t, distance between stands: 3,700 mm, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Bdedpfoydpxvox Acnjg Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: used, mileage: 851,168 km, power: 315 kW (428.28 HP), first registration: 04/2019, fuel type: diesel, empty load weight: 12,090 kg, maximum load weight: 13,910 kg, overall weight: 26,000 kg, tire size: 315/80 22,5, tire condition: 30 %, axle configuration: 6x2, wheelbase: 4,600 mm, next inspection (TÜV): 04/2026, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2019, operating hours: 851,168 h, front tire size: 315/80 22,5, rear tire size: 315/80 22,5, number of beds: 1, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, differential lock, fog lights, onboard computer, parking heater, sliding door, trailer coupling, truck registration, Reference number for inquiries: 40767 Volvo FH 460 * Year of manufacture: 2019 * ABS (Anti-lock Braking System) * Trailer coupling * EBS (Electronic Braking System) * Electric window lifters * Cab * Automatic climate control * Cool box * Air suspension * Lift axle * Power steering * Sleeper berth * Seat heating * Auxiliary heater * Cruise control * On-board computer * Differential lock * Additional headlights * Digital tachograph * Distance control assistant * Lane departure warning assistant * OBU preparation (On-Board Unit) * Refrigerator * Electric windows and mirrors * AdBlue tank * Fog lights * Comfort suspension seat * Multifunction steering wheel * Sun visor * Lane change warning * Collision warning system * VEB brake * Radio remote control * Inspections: HU / AU 04.2026 * Transmission: Automatic * Suspension: Leaf / air suspension * Gross vehicle weight: 26,000 kg * Unladen weight: 12,090 kg * Payload: 13,910 kg * Perm. gross vehicle weight: 26,000 kg * Tire condition, 1st axle: 30% -- 30%, Tire size: 315/80 R22.5 * Tire condition, 2nd axle: 30%|30% -- 30%|30%, Tire size: 315/80 R22.5 * Tire condition, 3rd axle: 30% -- 30%, Tire size: 315/80 R22.5 * Wheelbase: 4,600 mm * Tire sizes: 315/80 R22.5 * Globetrotter XL * Reversing camera * Additional spotlights Bjdpfx Acjydu Atonsdg * Meiller RK 2165 Disclaimer: Specifications subject to change, prior sale, and errors excepted. Further photos and videos are available on our homepage. Our comprehensive service includes, e.g.: * Purchase / sale / rental of commercial vehicles * Quick and hassle-free financing * Handling of all (export) documents * Ordering export / customs license plates * Vehicle preparation: new tarpaulins, labeling, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained staff, we will be happy to advise you.

Condition: good (used), Year of construction: 1986, machine/vehicle number: 057-016-47, Offer 26185 Technical specifications: Bedpfxozn H Rvs Acnsdg - Maximum pressing force: 160 t - Maximum ram stroke: approx. 500 mm - Average working speed: approx. 92 mm/s - Return speed: 125 mm/s - Installation height: approx. 1000 mm - Overhang to center of ram: 360 mm - Ram mounting pin: 40 mm - Table size: 900 x 630 mm - Table bore/opening: 220 mm - Table height above floor: 720 mm - Oil capacity: approx. 200 liters - Drive: 400 V / 17 kW - Space requirement: approx. W 1150 x H 3600 x D 1850 mm - Weight: approx. 7500 kg

Condition: used, mileage: 708,677 km, power: 375 kW (509.86 HP), first registration: 11/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Mercedes-Benz 2551 Actros MEILLER Roll-off Tipper 6x2 Suspension: Air-Air Wheelbase: 4.60 m Payload: 14280 kg MEILLER Type: RS21/65 1x Remote control 5.60 m to the center of the rollers Equipment: - Retarder with 6 stages - Digital tachograph - Seat heating + ventilation - 2x beds - Cooler box - Liftable and steerable rear axle Bedpfx Acozch Tcsnedg - Reversing camera - Lane keeping assist - Emergency braking assist - Hill start assist - Alarm system - Radio-navigation-telephone-DVD-AUX-USB-Bluetooth - Electric windows - Electric sunroof - Sun visor - Remote control - Trailer coupling (air, ABS, and electrical connections) We would also be happy to assist you with financing/leasing through our partners. All information is subject to change without notice. Errors and prior sale are excepted.

Condition: new, color: black, driver cabin: other, gearing type: other, Year of construction: 2022, Vehicle location: Bovenden. Body: 18-ton roll-off system, Hiab Multilift Ultima 18S56 for containers up to 6.5m. Equipment length: 5600mm (G-dimension). Hook height: 1570mm. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Bodpfsy U N Nqox Acnedg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, ORT Italia Netting Machine CE Certified Model RP 18/U Year 2012 Siemens SIMATIC OP17 CNC Control Panel Bdodpfx Acezb Imaonog Reference F24 €9,500 (including transport)

Condition: used, color: green, loading space width: 2,400 mm, loading space length: 6,500 mm, loading space height: 1 mm, mileage: 1,001 km, first registration: 06/2015, gearing type: other, driver cabin: other, Vehicle location: Croatia Body: Roll-off platform with front wall, lower roll-off platform; the year of manufacture was estimated as no identification plate is available! Location: Trgo-Auto d.o.o. Matoseva 86 0 Solin Hrvatska / Croatia / Croatia ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Bjdozk Rk Eepfx Acnodg

Condition: used, mileage: 202,092 km, power: 290 kW (394.29 HP), first registration: 11/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2027, color: orange, emission class: euro6, total length: 7,700 mm, total width: 2,550 mm, total height: 3,600 mm, Equipment: ABS, air conditioning, soot filter, MB 2640 Multilift Roll-off Truck 6x4 Suspension: Leaf-air Wheelbase: 3.60 m Payload: 14,565 kg HIAB Hooklift Type: XR21S46 - W - IT2B- Year: 2016 4.80 m to the center of the rollers Special Equipment: Front axle load 8.0 t, Audio system: CD radio (Bluetooth), Step with handrail on the roof, Exhaust to the lower right, Brake connection standard and DuoMatic, Air horn, Suspension: Front springs 8.0 t, 3 leaves, Transmission: 12-speed - Type: G 230-12, Rear lights, construction site version, Info display 10.4 cm with additional display, Interior filter for construction vehicles, Fuel tank: 290 L steel, left, Air intake from the front, Parameterizable special module, Rotating beacon left/right, Reversing warning audible (warning signal outside), Rear cross member reinforced, Protective plate under main tank, Seats in the cab: Driver's seat, sprung comfort seat, Sun visor outside, Sunshade for side window, driver's door, Additional stabilizer, Rear axle / trailing axle, Storage flap outside left, 24V socket in the passenger footwell, additional, Stone chip protection grille Additional Equipment: Emission standard EURO 6, Axle configuration: 6x4, Trailer brake 2-line, Trailer socket 24V / 15-pole, Arocs, Exterior mirrors electrically adjustable and heated, Battery 170 Ah, Differential lock rear axle, Compressed air connection in the cab, Compressed air tank steel, Cab: Width 2.30 m, Cab: Cab entry movable, Cab: Tilting device hydraulic, Cab: M ClassicSpace, Cab: steel sprung, standard, Cab floor with engine tunnel 170 mm, Suspension: Leaf / air, Window lifters electric, Windshield tinted, Generator 100 A, Urea tank (AdBlue): 60 L, Lift roof manual (steel), Rear axle bevel gear 233, Bdsdpfszf Sg Dsx Acnog Interior filter: Pollen filter, Steering power pump unregulated, Air compressor 2-cylinder, Air dryer heated, Engine 10.7 L - 290 kW R6 Diesel (OM 470), Engine brake, Engine compartment encapsulation, Auxiliary drive MB 131-2c, Frame lowering without air spring residual pressure control, Ramp mirrors, Waste heat recovery, Rear window, Disc brakes with full protection, Disc brakes front and rear axle, Seat cover / upholstery: Fabric, Seats in the cab: Passenger multi-adjustable seat, Stabilizer front axle, Socket cab 24V, Tachograph / EG control device, Rear underrun protection fixed, Front axle straight, Water pump regulated, Permissible total weight 26.0 t, Oil cooler transmission We will also be happy to support you in the area of financing/leasing with our partners. All information without guarantee. Subject to change and prior sale.

Condition: new, Year of construction: 2026, color: grey, overall weight: 15,000 kg, maximum load weight: 12,690 kg, empty load weight: 2,310 kg, loading space volume: 20 m³, loading space width: 2,380 mm, loading space length: 6,000 mm, loading space height: 1,400 mm, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors Body: Roll-off container with double-wing door, approx. 20m³, ARCHIVE IMAGES! Roll-off container according to DIN 30722-1, external rollers greaseable, floor 5mm, walls made of 3mm steel, spar spacing 750 mm, double-wing door with reinforcement and Dutch door latch, all-round tarpaulin and net hooks, galvanized ladder rungs according to UVV on the front, RAL 7016! with 2 lashing eyes on the front wall and 4 lashing eyes per side. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Bdedpfxszbm Ngo Acnog

Condition: new, Year of construction: 2026, color: grey, overall weight: 15,000 kg, maximum load weight: 12,050 kg, empty load weight: 2,950 kg, loading space volume: 36 m³, loading space width: 2,300 mm, loading space length: 6,500 mm, loading space height: 2,400 mm, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, doors. Bdjdpfxezbm Nmo Acnjg Superstructure: Roll-off container with double-wing door, approx. 36 m³, with lashing eyes. ARCHIVE IMAGES. Standard roll-off container, external rollers can be lubricated and replaced, floor 5mm, walls made of 3mm steel, stringers 750, double-wing doors with reinforcement and Dutch door latch, circumferential tarpaulin and net hooks, galvanized ladder rungs according to UVV regulations on the front, warning markings, RAL 7016 anthracite gray, with 2 lashing eyes on the front wall and 4 lashing eyes on each side! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Condition: used, mileage: 1,001 km, first registration: 01/2009, color: black, driver cabin: other, gearing type: other, Year of construction: 2009, Vehicle location: en route / in transit, hydraulic cross-locking system. Body: 21-ton roll-off system, Hiab Multilift XP21Z59 for containers up to 7m. Bdjdpfx Aszwd Iwjcneg ACCESSORY INFORMATION IS WITHOUT GUARANTEE; subject to change, prior sale, and errors!

Condition: reconditioned (used), Year of construction: 2025, briquette diameter: 100 mm, Equipment: cooling unit, emergency stop, Briquette press Di Più MB100 – Year of manufacture 2009 – Complete system with saws & accessories (Overhauled in 2026!) Briquette press Pawert SPM I-90/200 Overhauled in 2025 (Like new!) For sale are briquette presses of the type Di Più MB100, year of manufacture 2009 (overhauled in 2025/26), including saws, conveying equipment, and other accessories. The machines come from industrial use and are ideal for the production of wood briquettes from sawdust, wood chips, and wood residues. --- Technical data (per machine): Type: Di Più BRIK MB100 Bdedpfszw T Dzex Acneg Year of manufacture: 2009 Briquette diameter: approx. 90 – 110 mm Production capacity: approx. 1,300 – 2,300 kg/h Press pressure: approx. 2,000 – 2,500 kg/cm² Main motor: 75 kW Total power: approx. 98 kW Material moisture: optimal 8 – 12 % Particle size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Drive: hydraulic ram press --- Equipment: Material hopper Conveying screws Hydraulic system Control cabinets Saws for cutting briquettes to length Protective covers & safety systems Discharge units --- Scope of delivery: 3 complete Di Più MB100 briquette presses Saws Conveying equipment & accessories Spare parts upon request --- Application areas: Sawmills Wood processing industry Biomass plants Briquette production for energy & sale Location: on request Transport: Organization possible by agreement Price: on request Individual sale or complete package possible

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 18 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 13,180 kg, empty load weight: 1,820 kg, loading space volume: 9.5 m³, loading space width: 2,300 mm, loading space length: 5,500 mm, loading space height: 750 mm, Price upon request. The price applies ex works, 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible upon agreement. Leasing/hire purchase options available. 5 units available for immediate delivery; other RAL colors available upon request. Other models and sizes available from stock in Paderborn. You can view our stock levels on our website. Technical description: • Internal dimensions: 5500 x 2300 x 750 mm • Usable volume: 9.5 cbm • Tare weight: 1820 kg • Floor: 5 mm S235 • Side walls: 3 mm S235 • Front wall angled upwards • All sheets and profiles continuously welded • Double-wing door with safety lock • Standard ladder according to UVV, bolted on, galvanized Bdjdpfx Acozu Rg Usnog • Container tested and approved according to DGUV rule 114-010 • Floor-side wall connection 90° • Hook diameter 50 mm, S355 • Hook height 1570 mm • Top frame, round tube Ø 89 mm • Net hooks • All moving parts greaseable • Steel drain rollers 159 x 6.3, length 300 mm • Interior and exterior zinc phosphate primer, exterior painted with synthetic resin paint (80-100 μ) • Permissible total weight 15,000 kg Errors and prior sale excepted. Photos are for illustrative purposes only! For further questions, please send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 7.5 ft, color: green, overall weight: 15,000 kg, maximum load weight: 13,668 kg, empty load weight: 1,332 kg, loading space volume: 5.2 m³, loading space width: 2,300 mm, loading space length: 4,500 mm, loading space height: 500 mm, Price available upon request. The price applies ex warehouse 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible by arrangement. Leasing/hire purchase possible. 1 unit in stock, RAL 7043 Technical description: * Internal dimensions: 4500 x 2300 x 500 mm * Usable volume: 5.2 cbm * Tare weight: 1332 kg * Floor: 5 mm S 235 * Side walls: 3 mm S 235 * End wall angled upwards Bdjdpfx Aezu Rhfocneg * All sheets and profiles continuously welded * Double-leaf door with safety lock * Container tested and approved according to DGUV Rule 114-010 * Floor-side wall connection: 90° * Hook diameter: 50 mm, S 355 * Hook height: 1570 mm * Top frame: round tube, Ø 89 mm * Mesh hooks * All moving parts are greaseable * Steel drain rollers: 159 x 6.3, length 300 mm * Inside and outside: zinc phosphate primer, outside painted with synthetic resin paint (80-100 μ) * Permissible total weight: 15,000 kg

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 1,238 kg, empty load weight: 2,652 kg, loading space volume: 29.9 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 2,165 mm, Price on request. The price applies ex warehouse, 33106 Paderborn! Quantity discounts are possible for the purchase of multiple containers. Europe-wide delivery possible upon agreement. *Leasing/hire purchase possible!* 1 unit in stock, RAL 7043 2 units available on short notice, other RAL colors available on request Other versions and sizes available from stock in Paderborn. You can view our stock levels on our website. Roll-off container according to DIN Technical description: Bdedpfszu Rhlsx Acnsg * Internal dimensions: 6000 x 2300 x 2165 mm * Usable volume: 29.9 cbm * Tare weight: 2652 kg * Floor 5 mm S 235 * Side walls 3 mm S 235 * Without internal supports, 1 longitudinal support (belly band) * All sheets and profiles continuously welded * Double-wing door with safety lock * Container tested and approved according to DGUV Rule 114-010 * Standard ladder, bolted on, galvanized * Floor-side wall connection 45° * Hook diameter 50 mm, S 355 * Hook height 1570 mm * Top frame square tube 100x100x5 mm * Mesh hooks * All moving parts lubricatable * Steel drain rollers 159 x 6.3, length 300 mm * Interior and exterior zinc phosphate primer, exterior painted with synthetic resin paint (80-100 μ) * Permissible total weight 15,000 kg Errors and prior sale excepted. Photos are for illustrative purposes only! The price applies per unit plus 19% VAT. For any questions, please send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 18 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 13,140 kg, empty load weight: 1,860 kg, loading space volume: 9.5 m³, loading space width: 2,300 mm, loading space length: 5,500 mm, loading space height: 750 mm, Price upon request. The price is valid ex warehouse, 33106 Paderborn! Quantity discounts are possible for the purchase of multiple containers. Europe-wide delivery is possible upon agreement. *Leasing/hire purchase possible.* 6 units in stock, RAL 7043 short-term availability, RAL 2011 Other designs and sizes are available from stock in Paderborn. You can view our stock on our website. Roll-off container according to DIN Technical description: * Internal dimensions: 5500 x 2300 x 750 mm * Usable volume: 9.5 cbm * Tare weight: 1860 kg * Floor: 5 mm S235 * Side walls: 3 mm S235 * End wall with angled upward slope * All sheets and profiles are continuously welded * Combination flap (swing and folding wall, loadable up to 7 tons, spring-assisted) * Standard ladder according to UVV, screwed on, galvanized * 8 lashing eyes in the floor, loadable up to 2.5 tons * Container tested and approved according to DGUV rule 114-010 * Floor-side wall connection 90° * Stringers made of U 90x55x4 mm * Stringer spacing 750 mm * Hook diameter 50 mm, S355 * Hook height 1570 mm * Top frame, round tube Ø 89 mm * Net hooks * All moving parts are greasable * Steel guide rollers 159×6.3, length 300 mm Bdsdpfxszu Rh So Acnsg * Interior and exterior zinc phosphate primer, exterior painted with synthetic resin paint (80-100 μ) * Permissible total weight 15,000 kg Subject to errors and prior sale. Photos are for illustration purposes only! The price applies per unit plus 19% VAT. For further questions, please send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 13,224 kg, empty load weight: 1,776 kg, loading space volume: 9.9 m³, loading space width: 2,350 mm, loading space length: 6,000 mm, loading space height: 700 mm, Price available upon request. The price applies ex works, 33106 Paderborn! Bdedjzu Ricepfx Acnjg Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible upon agreement. Leasing/hire purchase options available. 2 units in stock, RAL 7016 4 units available in the short term, other RAL colors available on request. Other designs and sizes available from stock in Paderborn. You can view our current stock on our website. Construction waste containers according to DIN standards. Technical description: * Internal dimensions: 6000 x 2350 x 700 mm * Usable volume: 9.9 cbm * Tare weight: 1776 kg * Floor: 5 mm Hardox 450 * Side walls: 3 mm Hardox 450 * Front wall angled upwards * All sheets and profiles continuously welded * Double-wing door with safety lock * Standard ladder according to UVV, screwed on, galvanized * Container tested and approved according to DGUV Regulation 114-010 * Floor-side wall connection 45° * Horizontal corrugations * Hook diameter 60 mm, S 355 * Hook height 1570 mm * Top frame, square profile * Lashing hooks * All moving parts greaseable * Steel drain rollers 159 x 6.3, length 300 mm * Inside and outside: 2-component epoxy primer, outside painted with 2-component polyurethane (80-100 μ) * Permissible total weight 15,000 kg Errors and prior sale excepted. Photos are for illustrative purposes only! The price applies per unit plus 19% VAT. If you have any questions, please send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey, Price available upon request. The price is valid ex warehouse 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible upon agreement. *Leasing/hire purchase possible.* 4 units, 6000 mm, available in the short term, RAL colors of your choice. 2 units, 6500 mm, available directly from the warehouse, RAL 7043. 7000 mm available in approximately 4-6 weeks, RAL color of your choice. Other designs and sizes available from the Paderborn warehouse. You can view our stock levels on our website. Roll-off container platform according to DIN. Technical description: * Dimensions 6000 mm: 6000 x 2550 mm internal dimensions * Dimensions 6500 mm: 6500 x 2550 mm internal dimensions * Tare weight 6000 mm: 1,720 kg Bsdpezu Rkaefx Acnjdg * Tare weight 6500 mm: 1807 kg * Longitudinal beams INP 180, spacing according to DIN 30722 * Tear plate floor 5 mm S 235 * Including 8 lashing eyes in the floor plate, loadable up to 2.5 t * Front wall height 1500 mm * Hook Ø 50 mm S355 * According to DIN 30722, including testing according to DGUV rule 114-010 * Steel roller bearings 159 x 6.3 mm, length 300 mm * Zinc phosphate primer and coated with synthetic resin paint * Permissible total weight 15,000 kg Errors and prior sale excepted. Photos are for illustrative purposes only! The price applies per unit plus 19% VAT. If you have any questions, please send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 7.5 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 13,055 kg, empty load weight: 1,945 kg, loading space volume: 10.4 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 6,000 mm, Price available upon request. The price is valid ex warehouse 33106 Paderborn! Quantity discounts possible for multiple container purchases. Europe-wide delivery possible upon agreement. *Leasing/hire purchase possible!* 3 units available in stock, RAL 7043 Technical description: Other models and sizes available from the Paderborn warehouse. You can view our stock on our website. Roll-off container according to DIN *Internal dimensions: 6000 x 2300 x 750 mm *Usable volume: 10.4 cbm *Unladen weight: 1945 kg *Base 5 mm S235 *Side walls 3 mm S235 *End wall angled upwards *All sheets and profiles continuously welded *Double-wing door with safety lock *Standard ladder according to UVV, screwed on, galvanized *8 lashing eyes in the base plate, load-bearing up to 2.5 tons *Container tested and approved according to DGUV rule 114-010 *Base-side wall connection 90° *Stringers made of U 90x55x4 mm *Stringer spacing 750 mm *Hook diameter 50 mm, S355 *Hook height 1570 mm *Top frame round tube Ø 89 mm *Mesh hook *All moving parts lubricatable *Steel guide rollers 159×6.3, length 300 mm *Warning markings according to DIN 67520 *Inside and outside zinc phosphate primer, outside painted with synthetic resin paint (80-100 μ) Bdodpfx Acezu Rlqenog *Permissible total weight 15,000 kg Errors and prior sale excepted. Photos are for illustrative purposes only! The price applies per unit plus 19% VAT. For further questions, please send us a message or call us.

Condition: used, Year of construction: 2026, color: grey-black, empty load weight: 3 kg, first registration: 08/2026, fuel type: gasoline, gearing type: mechanical, TITLE: USED, OPEN-TOP DUMPSTER CONTAINER FOR BULKY WASTE, WITH REAR OPENING FEATURING TWO FRENCH DOORS AND A NEWLY REPLACED BASE REF: 26-U-106 TYPE: Bulky waste NEW: No LID: No OPENING: Rear, with two French doors DIMENSIONS TOTAL EXTERNAL LENGTH: 6.70 m EXTERNAL BOX WIDTH: 2.50 m FRONT SIDE INTERNAL / EXTERNAL: 2.20 m / 2.45 m REAR SIDE INTERNAL / EXTERNAL: 2.20 m / 2.45 m SIDE INTERNAL / EXTERNAL: 2.20 m / 2.45 m CUBIC METERS: 34 WEIGHT: 3120 kg BASE: 3 mm + 4 mm WALL: 3 mm COLOR: White and red Subject to errors and/or omissions The prices shown do not include VAT. Please contact the sales representative for an updated price and condition comparison. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA DUMPSTER CONTAINERS operates in the sale and purchase of industrial and commercial vehicles, specializing mainly in the waste management sector. Bdodpfjzw Rrisx Acnjg Specialized in trucks, trailers, and dumpster containers. With a stock of over 50 trucks and over 150 bodies, containers with and without cranes, available for immediate delivery. S.E.&O Given the large number of listings and details provided, Aurora encourages customers to verify the accuracy of the data with the sales staff.