Used Press Corner for sale (29,686)

Condition: used, Year of construction: 1981, machine/vehicle number: 104680, Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Fgodpfouqcwdjx Afish Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton

Condition: ready for operation (used), Year of construction: 2017, General Data Fgsdpfx Afexlllajieh Measurements width 2350 mm Measurements depth 4100 mm Measurements height 3680 mm Machine weight 39000 kg Main Drive Pressing force 6000 kN Bending length 4100 mm Clamping Unit Max open daylight 600 mm This Baykal APHS 41600 press brake was manufactured in 2017. It features a pressing force of 6000 kN and a bending length of 4100 mm. Equipped with a Cybelec ModEva Pac controller, it offers user-friendly graphic programming and full simulation capabilities. The machine includes a CNC-controlled backgauge with high accuracy and quick tool clamping system. Consider the opportunity to buy this Baykal APHS 41600 press brake. Contact us for more information. Application Types Bending

Condition: used, Workshop-refurbished Single-Column Eccentric Press WEINGARTEN Type AV 40 Machine No. 121826 D, Year of manufacture 1976 – Completely overhauled in 2003 Pressing force: 40 tons Throat depth: 225 mm Table opening: Ø 200 mm with support rim Ø 225 mm Table dimensions: 560 x 470 mm Ram area: 260 x 200 mm Adjustable ram stroke: 8–88 mm Ram adjustment: 63 mm Max. install height: 500 mm Clamping shank bore: Ø 40 mm Strokes per minute: 40–120 Motor power: 4 kW Power supply: 400 Volt, 50 Hz Table height above floor: 700–950 mm - Table height adjustment with 2 support spindles - Drop-through hole in table as round table opening with reduction ring from Ø 225 to Ø 100 mm - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC run-through protection - Stroke release via electric footswitch or two-hand control console - Front crankshaft support bearing - Overload protection via shear plate Fgodexlkq Iepfx Afijh - Manual central lubrication - Electrical cabinet with dual-circuit contactor control from 2003, permanently mounted on the machine - Safety standard (UVV) for manual loading/unloading The machine is equipped with the following operating modes: - Setup - Single stroke (two-hand) - Single stroke (foot) - Continuous run (foot) - Automatic continuous run - External engagement Required space (L x W x H): 1900 x 950 x 2600 mm Weight: 3.1 tons Very good condition

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, As-new CNC press brake from Euromac Model: FX Bend 1547 Capacity: 1500 x 47 tons Year of manufacture: 2022 CNC controlled axes: Y1, Y2, X1, X2, R1, R2, Z1, and Z2 Hydraulic WILA top and bottom clamping Laser safety system with angle measurement option Includes 1 set of tooling Fedpfxexlivps Afiegh

Condition: excellent (used), Year of construction: 1992, Manufacturer: Woronez TMP Year: 1992 Model and configuration: KB8044 / 2500 ton Nominal force: 2500 tons Slide stroke: 190 mm Number of strokes: 14-20 Fjdpfx Asxlh Ttjfisgh Closed die height: 560 mm Slide adjustment: 15 Table dimensions: 1530 x 1530 mm Distance between uprights: 1600 mm Main motor: 77 kW, 380 V Overall dimensions: 4920 x 3340 x 5980 mm Weight: 125 tons.

Condition: used, Year of construction: 1999, overall weight: 24,000 kg, stroke length: 1,200 mm, table width: 1,400 mm, table length: 1,600 mm, controller manufacturer: SIEMENS, controller model: S5 95U, power: 60 kW (81.58 HP), lifting height: 1,200 mm, pressing force: 350 t, distance table to ram: 1,250 mm, CONTROLS .. PLC SIEMENS S5 95U PRESS DESIGN .. drive system: hydraulic .. openings in uprights: yes PRESS FORCES .. total force (nominal): 350 to PRESS TABLE .. table surface (left-right): 1600 mm .. table surface (front-back): 1400 mm SLIDE .. stroke: 1200 mm Fsdpfx Afjxlh Iqeiogh SLIDE (HYDR. PRESS) .. approximation velocity max.: 250 mm/s .. working velocity min.: 14 mm/s .. working velocity max.: 50 mm/s TOOL ASSEMBLY DIMENSIONS .. distance table - slide max.: 1250 mm .. distance between columns (H-frame): 1650 mm .. passline opening (free passage in side columns): 630 mm ELECTRICAL SPECIFICATIONS .. total power consumption: 60 kW DIMENSIONS / WEIGHTS .. height above floor level: 4300 mm .. height under floor level: 1000 mm .. total weight approx.: 24000 kg ATTACHMENTS (PRESSES) .. European CE standards: yes

Condition: used, Year of construction: 1985, machine/vehicle number: 131 153, Press capacity: 40 ton Fgjdpfxeuqc Ago Afish Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 820 mm Table surface area : 810 x 450 mm Slide area: 720 x 350 mm Hole in table: 600 x 110 mm Number of strokes: 100 - 1.000 s.p.m. Table height over floor: 1.030 mm Required power: 19,5 kW Weight of machine approx.: 6,8 ton Extended machine accessories

Condition: ready for operation (used), Year of construction: 2000, operating hours: 59,827 h, General Data Machine weight 16600 kg Main Drive Fsdjxllnnjpfx Afiegh Pressing force 2000 kN This HAMMERLE BM 200 - 3100 press brake was manufactured in 2000. It is a robust and reliable machine, ideal for bending applications. Consider the opportunity to buy this HAMMERLE BM 200 - 3100 press brake. Contact us for more information. Application Types Bending

Condition: used, Year of construction: 1992, machine/vehicle number: 14161, This Lauffer press is being auctioned online in our industrial/machinery auction as part of the Bellinger Feinmechanik & Werkzeugbau company closure. Fedpoxlg S Uefx Afijgh

Condition: good (used), Year of construction: 2004, Gebruikte SMD CNC-kantbank Type: PBH 160 3100 4C Capaciteit: 3100 x 160 ton Fodpexlfbzjfx Afiegh Cybelec ModEva 12 CNC-besturing Bouwjaar: 2004 Y1-, Y2-, X- en R-as CNC-hydraulische bombering 1 set gereedschappen Vlakke druktafel

Condition: excellent (used), Year of construction: 2003, Manufacturer: ROVETTA Year: 2003 Fgodpexlh Rfjfx Afijh Condition: Used Stock number: 0385 Pressing force: 630 tons Number of connecting rods: 4 Slide stroke: 300 mm Slide adjustment: 250 mm Die clearance at BDC: 950 mm Strokes per minute: 15/65 Maximum front opening: 5,200 mm Table dimensions: 5,000 x 2,630 mm Slide dimensions: 5,000 x 2,630 mm Main motor power: 132 kW

Condition: used, Year of construction: 1999, installation height: 420 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, pressing force: 500 t, power: 100 kW (135.96 HP), controller manufacturer: SIEMENS, lifting height: 225 mm, coil width: 300 mm, product width (max.): 300 mm, stroke length: 225 mm, tool height: 420 mm, CONTROLS .. PLC SIEMENS PRESS DESIGN .. drive system: hydraulic SLIDE Fjdpfx Afsxlh Haeiegh .. total force (nominal): 500 to .. stroke: 225 mm .. stroke rate (max.): 60 /min SLIDE (HYDR. PRESS) .. approximation velocity max.: 200 mm/s .. working velocity min.: 15 mm/s .. working velocity max.: 44 mm/s .. return velocity max.: 200 mm/s COUNTER RAM .. nominal force: 100 to .. stroke: 30 mm V-RING .. nominal force: 200 to TOOL DIMENSIONS .. shut height max.: 420 mm .. ram adjustment: 100 mm .. distance between columns (H-frame): 880 mm .. passline opening (free passage in side columns): 470 mm .. range of transfer pins - in strip direction: 394 mm DECOILER .. design: cradle .. sheet width max.: 300 mm LEVELLER UNIT .. sheet thickness max.: 12 mm STRIP-FEEDER .. feeder type: grip feeder CROP SHEAR .. cutting force: 500 kN ELECTRICAL SPECIFICATIONS .. total power consumption: 100 kW Press is equipped with 4. force Straightener SCHMID Loop control GSW SCHWALBE new in 2016

Condition: used, Year of construction: 1984, Pressure total: 600 ton Ram stroke: 762 mm Slide adjustment: 406 mm Shut height (stroke down, adjustment up): 1322 mm Free frontal opening L-R: 3700 mm Table surface area : 3350 x 2134 mm Slide area: 3350 x 2134 mm Die cushion capacity in table: 180 ton Die cushion stroke: 305 mm Ejector in ram: 60 ton Ejector stroke in ram: 230 mm Number of strokes: 16 s.p.m. Fodpfxsuqdizs Afisgh Required power: 90 kW Weight of machine approx.: 185 ton Standard configuration Cushion in table pneumatic Extended machine accessories die loading charts for tool changeABB Handling robots for loading and unloading presses

Condition: reconditioned (used), functionality: fully functional, Technical data: • 4-station rotary table • Max. sealing area 350 x 250 • Max. blister depth 70 – 100 mm depending on product type • Sealing force 12,800 N • Sealing heater power 1.75 kW • Carton feeder • Package ejector • Carton forming unit • Cable with CEE 16A plug • Weight approx. 750 kg Fgsdpfx Afsfua Dcoioh Machine available in all variants b, b-2, b-3, b-4.

Condition: excellent (used), Year of construction: 2014, Operating hours: 78,000 hours Fgodpewd Ng Uefx Afieh 5 kW resonator Annual maintenance by Trumpf

Condition: good (used), Year of construction: 1998, Neat used punching machine from Euromac Type CX 1000 30 Capacity 30 ton Unloading 1000mm Overwrap up to 10000mm Fedpsxld R Ijfx Afisgh Including drawer cabinet with lots of tooling and multitool

Condition: excellent (used), Year of construction: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior models; however, it is equipped with a larger motor and hydraulic pump, and a more advanced electrical system. General Features: - Robust construction - Very user-friendly and economical to operate - Easy maintenance - Inspection door with window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring - Oil level switch - Control panel at the front of the machine - Automatic sensor for press start/stop - Emergency stop button - Circuit diagram - CE compliance - Operating manual Technical Data: - Motor power: 7.5 kW, 400 V, 50 Hz connection - Number of press cycles per minute: 14 - Throughput: 60 – 100 kg/h (material-dependent) - Briquette diameter: 65 mm - Number of hydraulic cylinders: 3 Fedjwyc H Topfx Afisgh - Hydraulic tank capacity: approx. 180 liters - Hopper diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Weight: approx. 1000 kg Including approx. 2 m briquette discharge pipe Note on used machines: - Specifications are subject to change and prior sale. - All prices are ex works – free loading at location. - The machine has been cleaned and tested for functionality. - All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. - Special agreements are only valid if made in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: used, Year of construction: 2001, total height: 4,000 mm, installation height: 410 mm, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, pressing force: 410 t, space requirement length: 4,540 mm, space requirement width: 2,860 mm, power: 175 kW (237.93 HP), controller manufacturer: BECKHOFF, controller model: C 6140, lifting height: 200 mm, product height (max.): 16 mm, product width (max.): 450 mm, stroke length: 200 mm, table length: 820 mm, tool height: 410 mm, CONTROLS .. PC controller BECKHOFF C 6140 PRESS DESIGN .. drive system: hydraulic .. frame design: H-frame, monoblock .. quick die change system: yes .. feedstock transport direction: left to right SLIDE .. total force (nominal): 410 to .. stroke: 200 mm SLIDE (HYDR. PRESS) .. approximation velocity max.: 200 mm/s .. working velocity min.: 8 mm/s .. working velocity max.: 80 mm/s .. return velocity max.: 150 mm/s COUNTER RAM .. nominal force: 120 to .. stroke: 40 mm Fjdexlh D Eepfx Afijgh V-RING .. nominal force: 250 to .. stroke: 40 mm TOOL DIMENSIONS .. lower table (left-right): 820 mm .. lower table (front-back): 1250 mm .. upper table (left-right): 820 mm .. upper table (front-back): 1250 mm .. shut height max.: 410 mm STRIP-FEEDER .. feeder type: roll feeder .. sheet width max.: 450 mm .. sheet thickness max.: 16 mm .. feeding step min.: 1 mm .. feeding step max.: 999.9 mm .. speed max.: 48 m/min .. nominal force: 60 kN .. band lubrication system: yes CROP SHEAR .. cutting force: 310 kN ELECTRICAL SPECIFICATIONS .. total power consumption: 175 kW .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4540 mm .. space requirements -front/back-: 2860 mm .. total height: 4000 mm ATTACHMENTS -FINEBLANKING PRESS- .. autom. tool clamping device: yes .. closed cabin: yes .. waste cutter: yes Long table fineblanking press, specifically useful for progressive/transfer operations The press was only used rarely. Hours of operation: 4'682 Stroke count: 1.2 Mio

Condition: used, Year of construction: 1979, machine/vehicle number: 5136, Press capacity: 30 ton Ram stroke adjustable: 16 - 40 mm Slide adjustment: 40 mm Shut height (stroke down, adjustment up): 230 +/- 20 mm Free lateral opening F-B: 170 mm Table surface area : 480 x 450 mm Slide area: 250 mm Number of strokes: 100 - 600 s.p.m. Required power: 5,5 kW Fgodpfxjuqd Rro Afioh Dimensions L x W x H: 2.150 x 1.200 x 1.160 mm Weight of machine approx.: 2,5 ton Standard configuration Roll feederfeeding length 20 - 100 mm Extended machine accessories Automation Roll feeder, type BBV 120/60

Condition: used, Year of construction: 2002, installation height: 460 mm, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, pressing force: 880 t, power: 188 kW (255.61 HP), lifting height: 305 mm, product height (max.): 16 mm, product width (max.): 450 mm, stroke length: 305 mm, table length: 1,010 mm, tool height: 460 mm, SLIDE .. total force (nominal): 880 to .. stroke: 305 mm .. cutting velocity min.: 5 mm/s .. cutting velocity max.: 70 mm/s .. closing velocity: 200 mm/s .. returning velocity: 200 mm/s V-RING .. nominal force: 400 to .. stroke: 40 mm COUNTER RAM .. nominal force: 200 to .. stroke: 40 mm TOOL DIMENSIONS .. lower table (left-right): 1010 mm .. lower table (front-back): 1600 mm .. upper table (left-right): 1000 mm .. upper table (front-back): 1000 mm .. shut height max.: 460 mm STRIP-FEEDER .. feeder type: roll feeder .. sheet width max.: 450 mm .. sheet thickness max.: 16 mm .. feeding step min.: 1 mm .. feeding step max.: 999.9 mm .. sheet length min: 3950 mm .. speed max.: 48 m/min .. Vertical adjustment: 140 mm .. nominal force: 60 kN ELECTRICAL SPECIFICATIONS .. total power consumption: 188 kW .. main drive power: 160 kW ATTACHMENTS -FINEBLANKING PRESS- .. autom. tool clamping device: yes Fgjdpexlhlpsfx Afish .. closed cabin: yes .. decoiler: no .. leveller unit: no .. waste cutter: yes

Condition: used, Year of construction: 2001, machine/vehicle number: 01/2437, Capacity: 250 ton V – Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Ram stroke: 67 mm Table surface area : 560 x 600 mm Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg Fgodpfxsu U Nime Afioh Standard configuration Automation roll-off try with leveller

Condition: used, Year of construction: 2003, table width: 2,000 mm, table length: 2,000 mm, installation height: 1,700 mm, pressing force: 800 t, stroke length: 900 mm, controller manufacturer: SIEMENS, controller model: S7 300, power: 370 kW (503.06 HP), overall weight: 81,000 kg, lifting height: 900 mm, tool height: 1,700 mm, CONTROLS .. PLC SIEMENS S7 300 PRESS DESIGN .. drive system: hydraulic PRESS FORCES .. total force (nominal): 800 to PRESS TABLE .. table surface (left-right): 2000 mm .. table surface (front-back): 2000 mm .. height above floor level: 700 mm SLIDE .. table surface (left-right): 2000 mm .. table surface (front-back): 2000 mm Fjdpfxsxlhlce Afijgh .. stroke: 900 mm SLIDE (HYDR. PRESS) .. approximation velocity max.: 400 mm/s .. working velocity min.: 5 mm/s .. working velocity max.: 160 mm/s .. return velocity max.: 300 mm/s TOOL ASSEMBLY DIMENSIONS .. shut height (stroke down, adjustment up), BDC: 1700 mm .. distance between columns (H-frame): 2100 mm ELECTRICAL SPECIFICATIONS .. total power consumption: 370 kW .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. total weight approx.: 81000 kg ATTACHMENTS (PRESSES) .. press automation: yes .. gripper transfer system: yes .. acc. to actual accident protection regulation: yes .. European CE standards: yes Complete hot forming line (sheet metal application)consisting of: * Hydraulic press LOIRE SAFE 800 to. * Schwartz GA1534 furnace system: - max. lining width: 1.500 mm - Inner furnace length: 20.000 mm - Inner height: 100 mm - max. temperature: 1000 °C * Feeder * ABB unloading and loading robot

Condition: used, Year of construction: 2001, machine/vehicle number: 150204, Press capacity: 100 ton Ram stroke: 300 mm Slide adjustment: 125 mm Shut height (stroke down, adjustment up): 600 mm Free frontal opening L-R: 2.020 mm Free lateral opening F-B: 620 mm Table surface area : 2.000 x 1.000 mm Slide area: 2.000 x 900 mm Hole in table: 1.700 x 300 mm Number of strokes: 10 - 50 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 4.400 mm Dimensions L x W x H: 5.166 x 2.500 x 4.400 mm Weight of machine approx.: 38 ton Fgjdpfx Afevmfznoish Standard configuration electrical overload protectionSIEMENS Control S72-hand control panel Extended machine accessories Automation Schleicher leveller (650 mm, max. 2.0 mm)Wanzke decoiler (max. 6t)Helmerding feeder (600 mm, 0,6 - 6,0 mm)

Condition: used, Year of construction: 1991, machine/vehicle number: 041-024/39, Press capacity: 63 ton Throat depth: 360 mm Stroke: 500 mm Daylight: 800 mm Table surface area : 750 x 560 mm Slide area: 630 x 400 Fgsdpfx Afevai R Toieh Working speed: 60 mm / sec Return speed: 380 mm / sec Electrical connected load: 12,6 kW Dimensions L x W x H: 1.200 x 1.950 x 2.800 mm Weight of machine approx.: 4,3 ton

Condition: used, Year of construction: 1983, machine/vehicle number: 5154, Capacity: 25 ton Throat depth: 250 mm Ram stroke: 6 - 60 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 190 mm Height of the bolster plate: 50 mm Table surface area : 500 x 400 mm Slide area: 350 x 250 mm Fodpfx Afouqc Hfoijgh Tool Clamping Hole Ram: 40 H7 mm Number of strokes: 160 s.p.m. Dimensions L x W x H: 1.300 x 1.500 x 1.995 mm Weight of machine approx.: 2 ton Standard configuration Extended machine accessories Press body can be tilt