Used Press Brake Cnc for sale (45,785)

Condition: used, CNC Press Brake COLLY 502/A Numerical Command: CYBELEC type DNC 32 P-CM Capacity: Maxi length 2000 mm x 50 T Throat depth: 200 mm Distance between uprights: 1600 mm Back Gear Gauge 1 axe Defective cylinder Hnsdpfx Ahjxnilvs Nog Right cylinder joint to change Machine functional (only right cylinder joint to change) Voltage: 380 V Length: 2500 mm Depth: 2100 mm Total height: 2400 mm Weight: approx 4 T

Year of construction: 1983, condition: used, machine/vehicle number: 28148, pression: 150 t working width: 4500 mm clear support width: 3050 mm Hnsdpfx Ahjb N Evmj Nsg support throat: 300 mm rear stop: 1000 mm electrical connection: 380 V, 18,5 kW weight: 14,8 t space needed: 4200 x 2000 x 3000/3150 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, actuation type: hydraulic, bending force (max.): 56 t, working width: 2,200 mm, throat depth: 200 mm, distance between stands: 2,100 mm, TECHNICAL DETAILS Press force: 56 t Bending length: 2,200 mm Distance between uprights: 2,100 mm Throat depth: 200 mm MACHINE DETAILS Total power requirement: 20 kW Dimensions & Weight Hnsdpfx Asw Sxcyoh Nsg Space requirement: 2,800 x 1,800 x 2,400 m Machine weight: 6,100 kg

Condition: good (used), Year of construction: 2000, machine/vehicle number: 7532000080, Offer 25092 Technical specifications: - Working width 3500 mm - Pressure capacity 160 t - Clearance between columns 3100 mm - Table width 405 mm - Throat depth 260 mm - Installation height approx. 240 mm - Ram stroke 180 mm - Working height approx. 870 mm - Motor power approx. 15 kW - Oil capacity approx. 300 l Hsdpfx Aev Tli Ejh Nsng - Space required approx. W 3800 x H 2750 x D 2100 mm - Weight approx. 11500 kg - With: - Swivel arm - Control panel with CYBELEC CNC control - Y 1 + 2 ; X ; Z - Motorized backgauge up to 620 mm - Manual crowning WILA - 4-way universal die + pointing tool - Two-hand control panel with foot switch - Support arms

Condition: new, Year of construction: 2025, control type: CNC control, bending force (max.): 63 t, working width: 2,000 mm, travel distance X-axis: 550 mm, back gauge adjustment: CNC-controlled, back gauge: 550 mm, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Brand new 3-axis CNC-controlled press brake with automatic bending angle calculation and color graphics. Maximum pressing force: 630 kN = 4 mm steel sheet S235jr bent along the entire bending length with a V-width of 36 mm Hnedpfxoxdiyrj Ah Nsg Maximum bending length: 2,000 mm Distance between side frames: 1,320 mm Throat depth in side frames: 250 mm Ram stroke length: 100 mm Maximum installation height: 320 mm Ram travel speed downwards: 50/6 mm/sec, upwards: 60 mm/sec Table width: 160 mm Back gauge adjustment range: 550 mm Oil tank capacity: 250 liters Dimensions approximately 2.6 x 1.5 m x height 2.4 m Drive power: 5.5 kW Weight: approx. 3,500 kg Equipment: - Die block - Bending punch

Condition: good (used), Year of construction: 2004, overall weight: 40,000 kg, pressing force: 450 t, AXIAL 4100x450tn + Cybelec ModEva 10 + 5 axes (Y1, Y2, X, R, Z) + WILA cnc compensation table + WILA hydraulic punch and die clamp Bending length: 4.100mm Force: 450tn Cursa: 365mm Axes: 5 axes (Y1, Y2, X, R, Z) Hodpfju Au U Tsx Ah Nong *Z-axis (double prismatic guide nipples) WILA hydraulic clamping of punch and die WILA cnc compensation table Trancha working speeds: Approach speed: 110mm/sec. Working speed: 8mm/sec. Up speed: 90mm/sec Distance between uprights: 3600mm Neckline: 410mm Opening between table and truss: 500mm Pit penetration: 975mm Cnc: Cybelec ModEva 10 (Control CPU New as of September 2023) Laser safety: DSP LASER - TX Weight: 40tn Motor power: 30KW

Year of construction: 2022, condition: new, immediately available CNC press brake YAWEI PBH160/3100-4C - Pressing force: 1600KN - max. bending length: 3100mm - Year of construction 2022 - CNC controlled hydraulic crowning - Cybelec Modeva 19T controller - WILA upper tool clamp - 60mm table with 13.5mm x 22mm slot for insert dies - 2 front support arms sliding on linear guide - CE Fiessler Akas IIF light barrier - 24 months warranty Hsdpfeiwfp Tex Ah Nsng - Commissioning, training

Condition: good (used), functionality: fully functional, Year of construction: 2003, working width: 4,300 mm, throat depth: 450 mm, distance between stands: 3,700 mm, operating speed: 120 mm/s, reverse speed: 120 mm/s, back gauge: 550 mm, overall weight: 21,500 kg, total length: 5,100 mm, total width: 2,000 mm, total height: 3,300 mm, pressing force: 300 t, Equipment: safety light barrier, Bending capacity: 300 Ton Hedpfx Aowc Sbreh Neng Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: excellent (used), Year of construction: 2007, Synchronized hydraulic press brake MECOS Mod. Syncro 200/4000. Numerco ESA KVARA control. NR.07 Controlled axes (Y1-Y2-X-R-Z1-Z1-Z1) WILA automatic compensation table. Hodpfov S Ad Rjx Ah Nsng Pneumatic tool attachment: Type Promecam, Tecnostamp H=150 mm. Useful bending length: mm 4050. Power exerted: Ton 200. Front safety devices: DSP LASER. Weight: kg 24,000.

Year of construction: 1992, condition: good (used), machine/vehicle number: 03.323.36002, Lg.No. 22621 Technical data: - max. working length 3500 mm - column passage 3050 mm - max pressing force 2000 kN - max distance table / ram 480 mm - column throat 260 mm - ram stroke approx. 300 mm Hsdeip Nikjpfx Ah Nong - Stroke speeds - downward speed idle max. 100 mm/sec - Upward speed 80 mm/sec - Downward press speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - weight approx. 16000 kg - with: - CNC - control CYBELEC renewed in 2008 - controlled crowning device - controlled backgauge with height adjustment 5 - 1000 mm - hydr. tool clamping - upper tool + universal die tool - material supports - two-hand control panel

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, controller model: CYBELEC DNC 880S, working width: 3,050 mm, pressing force: 135 t, TECHNICAL DETAILS Pressure: 135 t Bending length: 3050 mm Control: CYBELEC DNC 880S Controlled axes: Y1, Y2, X, R MACHINE DETAILS Dimensions L x W x H: 4800 x 2400 x 2800 mm Machine weight: approx. 7500 kg EQUIPMENT Hnsdpfsv Unz Hex Ah Neg - 1 set of upper and lower tools - AMADA tool holder - Crowning - 2 support arms - Foot switch - 2 side safety doors - Laser safe - 4 manually adjustable stop fingers

Condition: new, functionality: fully functional, Year of construction: 2025, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. Hodpfx Aherq D Nij Nong The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: new, Year of construction: 2023, Immediately available, highly upgraded CNC press brake YAWEI PBH220/4100-7C - Pressing force: 2200KN - max. bending length: 4100mm Hedpjqgcq Hjfx Ah Nsng - Year of construction 2023 - CNC controlled hydraulic crowning - Cybelec VISITOUCH 19T control - 7 CNC controlled axes - Y1/Y2, X, R, Z1 + Z2, X1 (Delta X) - Mechanical quick clamping upper tools type Amada - 60mm table with 13.5mm x 22mm groove for insertion dies - 2 front support arms can be moved on linear guides - CE with Fiessler AKAS IIF (automatic height adjustment) - 24 month guarantee - Commissioning, training

Year of construction: 1989, condition: ready for operation (used), A Darley CNC press brake is available. Pressing force: 2000kN, working width: 5200mm, power: 15kW, oil capacity: 160l, machine dimensions X/Y/Z: approx. 5500mm/1900mm/3100mm, weight: approx. 20000kg. Including tools and accessories. Documentation available. On-site inspection is possible. Hnjdpfovf Ixyjx Ah Neg

Condition: used, Year of construction: 1986, machine/vehicle number: 200485, Lg.no. 24243 Technical data: - max. working length 4050 mm - upright clearance 3050 mm - max. pressing force 110 t - ram stroke 200 mm - throat 350 mm - Table height 900 mm - Opening width 400 mm Hsdpfstqmvzjx Ah Neng - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t - with: - CYBELEC ModEva 10 S control unit renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: - Mot. backgauge 5 - 1000 mm - front support arms - split pointing tool, - universal die

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: B0103A0209, overall weight: 11,000 kg, total length: 3,200 mm, total width: 2,400 mm, total height: 3,000 mm, pressing force: 85 t, TECHNICAL DETAILS Pressure force: 85 t Bending length: 2050 mm Hsdpfx Asv E Ncgsh Neng Column width: 1750 mm Thrust: 410 mm Operating pressure: max. 340 bar Stroke: max. 365 mm Deceleration: max. 95 ms Rapid traverse: 200 mm/s Working speed: 1 - 11 mm/s Retraction speed: 135 mm/s Safety distance Safety distance: min. 190 mm Machine weight Weight of the press: 9,950 kg

Condition: new, Year of construction: 2023, operating hours: 0 h, new IMMEDIATELY available CNC press brake YAWEI PBC50/2050-4C - Pressing force: 500KN - max. bending length: 2050mm Hnjdpfx Ahoqgcrns Nsg - Year of construction 2023 - CNC controlled hydraulic crowning - Cybelec VISITOUCH 19T control - WILA hydraulic upper tool clamping - 60mm table with 13.5mm x 22mm groove for insertion dies - 2 front support arms can be moved on linear guides - CE with Fiessler AKAS II - 12 months warranty - Commissioning, training

Condition: ready for operation (used), Year of construction: 1997, Press force: 1700kN, bending length: 4000mm, stroke: 215mm, installation height: 365mm, passage width: 3680mm, throat depth: 410mm, feed speed: 200mm/s, bending speed: 1-10mm/s, retraction rate: 135mm/s, working height: 1050mm, control: Delem. Including spare parts and accessories. Documentation available. Hnedjtqfqispfx Ah Neg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 23,713 h, machine/vehicle number: 10-968, controller model: Cybelec Modeva 10 S, stroke length: 410 mm, pressing force: 175 t, TECHNICAL DETAILS Pressure force: 175 t Bending length: 3550 mm Stroke (max.): 410 mm Control: Cybelec Modeva 10 S Hsdpfxsv E I Uze Ah Nong MACHINE DETAILS Machine dimensions (LxWxH): 4500 x 2380 x 3500 mm Machine weight: 14,500 kg EQUIPMENT - Controlled axes: Y1, Y2, X, R, Z1, Z2, crowning - Wila tool holder - Hydraulic upper and lower tool clamping - Lasersafe FIESSLER - 2x material support arm - 2x manual stop fingers - Two-hand foot operation - Die displacement

Year of construction: 1998, condition: ready for operation (used), Pressing force: 2000kN, working width: 3100mm, column passage: 3240mm, max. stroke: 400mm, throat depth: 250mm, max. installation height: 965mm, NC axes: 11, hydraulic volume: 550l, machine dimensions X/Y: approx. 4400mm/3400mm, weight: approx. 16600kg, control: Cyb-Tech Infinitron. Documentation available. On-site inspection is possible. Hnsdpfx Ahjwhp Nde Neg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, operating hours: 38,732 h, working width: 3,100 mm, travel distance X-axis: 600 mm, back gauge speed R-axis: 200 mm/s, back gauge travel distance R-axis: 250 mm, pressing force: 130 t, TECHNICAL DETAILS Control: MMC ByBend Working area Bending length: 3100 mm Column clearance: 3200 mm Pressing force: 130 t Working height: 1060 mm Thrust: 250 mm Stroke: 400 mm Installation height: 915 mm Axes & travel paths Controlled axes: Y1 - Y2 - X1 - X2 - R1 - R2 - Z1 - Z2 X-axis travel path: 600 mm X-axis travel speed: 500 mm/s R-axis travel path: 250 mm R-axis travel speed: 200 mm/s Hnsdpfxsv E Iu Uo Ah Nsg Y-retraction: 150 mm/s Y-working speed: max. 1-10 mm/s Y-rapid traverse: 150 mm/s Back stop: 1200 mm MACHINE DETAILS Machine dimensions (LxWxH): 4440 x 2950 x 3100 mm Machine weight: approx. 13,400 kg EQUIPMENT - Tool holder with hydro cushion (top) and 3-point die holder (bottom) with hydraulic tool clamp - Sliding table for flattening operations - BWS-T protective devices as access protection at the rear (Sick safety curtain) & BWS at the front - Bending aid at the rear (0-75°) with brush inserts, H, A, W axes continuously programmable - Pair of stop fingers (complex) - Side stop for dies - Table extension (station) left for supports - Additional plates for dies V=60 and larger - Additional foot switch for second operator or station - Articulated arm for control Extensive tool package included in delivery

Year of construction: 1995, condition: ready for operation (used), Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible. Hnsdpfetva Dnsx Ah Nog

Year of construction: 1996, condition: ready for operation (used), Pressing force: 1200kN, working width: 4100mm, stand distance: 3550mm, table width: 215mm, throat depth: 400mm, stroke: 800mm, working speed: 80mm/s, power: 11kW, weight: approx. 12000kg. An on-site inspection is possible. Hnedpfx Aheumwh Nj Neg

Condition: ready for operation (used), Pressing force: 440kN, working width: 1600mm, cylinder stroke: 150mm, travel X/R: 400mm/200mm, adjustment speed R-axis: 200mm/s, installation height: 400mm, throat depth: 200mm, machine stand distance: 1530mm, motor power: 7.5kW, weight: approx. 2100kg. Including various accessories and tools. Documentation available. On-site inspection is possible. Hsdpeu N Hc Nsfx Ah Neng

Condition: ready for operation (used), Year of construction: 2008, Pressing force: 3200kN, enlarged stroke: 810mm, working width: 4050mm, ram speed: downwards: 130mm/s, pressing: 6.5mm/s, upwards: 75mm, stop time: 109ms, safety distance: 174mm, weight: approx. 29000kg, operating hours: 16010h, control: Cybelec ModEva 15S. Including 4 bending aids and angle measuring sensor. Dies, embossing tools, pointed punches, roe foot punches, closing bar, extension for upper tool, radius tool and adapter available on request. Documentation available. Hnsdowxb Igepfx Ah Nog