Used Preset for sale (302)

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) Itjdpfoykub Asx Abnjk F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: good (used), Year of construction: 1987, Twist drill grinding machine Make: SCHANBACHER Type: S 3-50 Iedomnntmspfx Abnstk Year of manufacture: 1987 Technical data: - simple operation - grinding by means of gear motor - twist drill dimensions 3 - 50 mm - point angle 90 - 140 ° - adjustable clearance angle - grinding motor 400 V / 0,25 kW - geared motor for swiveling movement 400 V / 0,12 kW - grinding wheel dimensions - 175 x 22 x 20/90 x 20 mm - space requirement approx. W 810 x D 570 x H 1260 mm - weight approx. 120 kg - with - clamping device - presetting device

Condition: used, functionality: fully functional, machine/vehicle number: HR34433, Year of construction: 2022, operating hours: 4,093 h, load capacity: 3,500 kg, lifting height: 4,100 mm, free lift: 145 mm, fuel type: electric, mast type: duplex, construction height: 2,745 mm, fork length: 2,400 mm, empty load weight: 5,400 kg, total length: 2,570 mm, drive type: Elektro, construction width: 1,173 mm, Electric 4-wheel forklift Chassis number: HR34433 Load center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: good Front tires type: Superelastic Front tires condition: 60 - 80% Rear tires type: Superelastic Rear tires condition: 60 - 80% Battery volts: 80V Battery Ah: 775Ah Battery type: PzS Battery year: 2022 Itsdpfxowqipcs Abnek Description: Additional equipment on request Sideshifter, fork positioner, Fork carriage with integrated sideshifter, 1070 mm - Class 3 3rd valve, 4th valve, rear work light, front work light, heating, full cab, CE certificate, interior mirror, LED, seat, Pedestrian warning light, LED lights mounted on the mast, Orange hi-vis seat belt with safety lock, Grammer seat, air-suspended, fabric, Speed limit preset at 10 km/h, Yellow beacon - activation via ignition lock, LED work lights, 2 front and 1 rear, with brake, tail and reversing lights, Panoramic mirror, Front and rear mudguard, Hose group for 4 functions (2 additional functions) Accutouch mini-lever hydraulic controls

Condition: used, Double Band Saw for Small Logs The machine is designed for cutting small logs of various sizes, up to a maximum diameter of 400 mm. For this machine, increased to 550 mm! Minimum log length: 1000 mm. Model still produced under the name ARTIGLIO SDE80 - SD100 - SD110 - SD115 - SD130 - Very robust steel frame - Mechanical blade tensioning device - Constant blade tension and guidance - Manual oscillation of upper flywheels Itodpfx Ajxwk I Debnsk - Powerful oscillation of lower flywheels - Fully analog control cabinet operating the infeed and outfeed conveyors - Pneumatic clamping and pressing of workpiece logs - Electronic device for measuring cutting thickness (cant width) with 5 preset sizes - Movement of components via gear motor with frequency inverter - Log self-centering on feed system components - Log secured by heavy-duty spiked rollers - Standing operator control station - Automatic loading and unloading systems Technical data: - Flywheel diameter: 800 mm - Flywheel width: 75 mm - Blade width: 75–80 mm - Blade thickness: 0.8 mm - Blade length: 5700 mm - Motor power: 2 × 15 kW - Min. cant thickness: 60 mm - Max. cant thickness: 400 mm - Max. cutting height: 550 mm

Condition: used, Grant Aqua 5 Water BathThe Grant Sub Aqua 5 Plus is a digital, unstirred water bath designed for precise temperature control in laboratory applications. It is part of the SUB Aqua Pro series, known for its high-quality construction and reliability.​ Key Specifications Itedsxv Ayvjpfx Abnjk Temperature Range: +5°C to 99°C Temperature Stability: ±0.2°C Capacity: 5 liters Internal Dimensions: 281 x 131 x 132 mm External Dimensions: 335 x 215 x 200 mm Heating Power: 0.35 kW Material: High-grade stainless steel tank Display: Digital with PID control for quick heat-up and precision Additional Features: Three programmable temperature presets Countdown timer with audible buzzer Front panel lock-out User-settable sample protection and fixed thermal cut-out Gable polycarbonate lid included​ This model is suitable for applications requiring stable and precise temperature control, such as sample incubation, enzyme reactions, and media preparation.

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 0509, input voltage: 230 V, For sale is an analogue presetting device Zoller Bravo 2. The item is in good condition. Iodpfx Ajxwlpcobnjtk Presetting device Zoller Bravo 2 Serial number 0509 Year of manufacture 1999 Voltage 230 V∼ L/N/PE Frequency 50/60 Hz Tolerance (voltage) −10% to +6% Pneumatics (compressed air) 4−6 bar Power

Condition: used, Double chamfering line TFA3/D/12.5 Tube facing & bevelling The MAIR TFA3/D/12.5 double chamfering line is a high-performance industrial solution designed for simultaneous facing and internal/external bevelling of steel tubes. The line is capable of processing two tubes at the same time, finishing both ends with high precision and repeatability. Engineered for demanding production environments, this chamfering line is suitable for carbon steel tubes, hot or cold rolled, pickled or zinc-aluminium coated. Thanks to its CNC-controlled chamfering units, automated tube handling and integrated chip removal and blowing systems, the MAIR TFA3/D/12.5 ensures high productivity, consistent quality and reduced manual intervention. Scope of supply The complete MAIR TFA3/D/12.5 double chamfering line is composed of: Itodpfx Aoyl Upvsbnjk · Accumulating table for single-tube extraction via chain conveyors · Walking beam system for synchronized transport of two tubes · Two CNC chamfering machines, each equipped with: - Heavy-duty welded steel frame - Double chamfering unit with servo-driven linear movement - Tube clamping devices with interchangeable jaws - Toolholder disks for facing and internal/external bevelling - Hydraulic tool locking system (Morse taper) - Centralized lubrication system - Presetting bench for toolholders - Control panel · Chip conveyors located under the machines · Driven rollways and adjustable tube clamping stations · Blowing station for internal tube cleaning with adjustable system · Set of tooling (to be confirmed) Technical data · Manufacturer: MAIR · Model: TFA3/D/12.5 · Application: Double tube facing and inside/outside bevelling · Tube diameter range: 17.2 – 89 mm (3/8" - 3") · Tube length: 4 – 12.5 m · Material: Carbon steel strip (hot rolled, cold rolled, pickled or zinc-aluminium coated) Tube diameter range: 17.2 – 89 mm (3/8" - 3") Tube length: 4 – 12.5 m Material: Carbon steel strip (hot rolled, cold rolled, pickled or zinc-aluminium coated)

Condition: as good as new (ex-display), Morgana AutoCut Pro – Showroom Model Location: United Kingdom Availability: In stock Condition: Excellent showroom model – serviced by a Morgana-trained engineer. Sheet count of less than 1500. Overview The Morgana AutoCut Pro is a high speed multi-function finishing system designed for busy digital print environments requiring professional cutting, creasing and finishing from one compact solution. The AutoCut Pro is capable of slitting, cutting, bleed trimming and creasing in a single pass, making it ideal for the production of business cards, greeting cards, invitations, flyers and promotional products. Equipped with Morgana’s upper-belt tri-suction feeding system, the AutoCut Pro provides reliable feeding across a wide range of digitally printed stocks whilst helping to reduce marking and sheet damage during production. The automatic feed table elevation system improves sheet separation and minimises mis-feeds. The intuitive touchscreen control system features PRESET, Manual Set and Flex modes, allowing operators to quickly produce standard applications or fully customise bespoke jobs with ease. Key Features Upper-belt tri-suction feeding system Slits, cuts, bleed trims and creases in a single pass Optional inline folding with Morgana AutoFold Sheet sizes up to 330 x 490mm Optional long sheet capability up to 330 x 700mm Up to 10 SRA3 sheets per minute Up to 5000 A4 sheets per hour with 1 crease 4” touchscreen operation 150 job recall memory Pre-set templates for common applications Flex mode for custom programming Skew adjustment Slide aligner Double feed detection Why Choose the Morgana AutoCut Pro? High speed cutting, creasing and finishing in a single compact system Ideal for business cards, greeting cards, invitations, flyers and promotional products Slits, cuts, bleed trims and creases in one pass for increased productivity Intuitive touchscreen controls with PRESET, Manual Set and Flex modes Reliable upper-belt tri-suction feeding system for digitally printed media Optional inline folding with the Morgana AutoFold Suitable for both digital and commercial print applications Why Buy from Glendale? Professionally refurbished and fully tested – every system is serviced by our trained engineers Expert training and ongoing support – helping you achieve the best results from your equipment Competitive pricing on consumables – keeping your production costs low Trusted supplier – years of experience supplying print finishing solutions throughout the UK Specifications Manufacturer Morgana Model AutoCut Pro Condition Used Stock Number 114996 Max sheet size 330mm x 490mm (700mm with long sheet kit) Iodpfxey Uzbls Abnjtk Min sheet size 210mm x 210mm Paper weight 120gsm - 350gsm Operation 4" touch screen Feeder capacity 100mm Cutting tolerance +/- 0.2 - 0.3mm Double feed detection Standard Cut mark registration Standard Feeding mechanism Upper belt tri-suction Machine dimensions W840mm x D790mm x H1090mm Machine weight 200kg Power requirement 220VAC 50/60Hz

Condition: excellent (used), Sub-spindle, Y-axis, C-axis FANUC 18i-TB control Turning diameter max 250 mm Turning length -555 mm Chuck Diameter -165 mm Main-spindle speeds 50-4'500 rpm Sub-spindle speeds 5'000 rpm Turret head 1+2: 24 positions with 12 driven positions each Tool presetting device Barloader Iedpfx Abjx A Eupenjtk Piece catching device Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Hettich ROTINA 420 and 420R laboratory centrifuges are state-of-the-art devices designed for laboratories that require centrifugation of large numbers of samples or samples with large volumes. They are used in medical diagnostic laboratories, research institutions and industrial laboratories. With extensive equipment options, Rotina 420 centrifuges can always be optimally adapted to the current needs in the laboratory. The Rotina 420 R laboratory centrifuge additionally features a high-efficiency cooling system. The main advantages of the ROTINA 420 and 420R centrifuges: centrifugation of slides at up to 15,000 rpm (24,400 x g) capacity of up to 4 x 600 mL (52 x 15 mL / 84 blood collection tubes / 16 microplates) modern, easy-to-use control panel large, easy-to-read display of preset and current operating parameters selectable deceleration and acceleration curves 98 user-defined centrifugation programs self-diagnosis function quiet operation and high stability brushless induction motor guaranteeing many years of maintenance-free operation choice: model without cooling (ROTINA 420) or with efficient cooling system in the range of -20°C to +40°C with pre-cooling and 'stand-by' function (ROTINA 420R) wide range of rotors and accessories: 4 horizontal rotors for tubes and buckets up to 600 mL and microplates and cytology slides 2 angled rotors for tubes up to 250 mL 1 angled rotor for microtubes 0.2-2.0 mL Itodpjuptrcsfx Abnsk 1 angled rotor for 0.2 mL tubes and PCR strips Rotor on equipment: Hettich Angle rotor 6-place with bio-containment for Benchtop centrifuge

Condition: used, This listing is for the Grant GD120 Water Bath/Circulator The unit is in full working condition and is ready for immediate use The Grant GD120 is a digitally controlled stirred water bath and circulator ideal for laboratory use, offering high precision and flexibility. Here's a breakdown of its features and capabilities: Key Features Immersion Thermostat with Intelligent Control Optimisation (ICO): Enables adaptive PID control for exceptionally stable temperature regulation. Integral Pump: Built-in circulation pump with a maximum flow rate of 17 L/min, allowing both sample immersion and external fluid circulation. User Interface: Equipped with a clear digital display, a rotor plus two-key control, timer function for reaction timing, and visual + audible alarms to notify operators of critical conditions. Preset Temperature Control: Supports one adjustable operating setpoint plus three preset temperature options for fast switching. Safety Features: Includes float-switch low liquid protection and an adjustable over-temperature cut-out for sample and user safety. Liquid Type Selection: Automatically adjusts heater power and temperature parameters depending on chosen liquid (e.g., water, oil, glycol mixtures). Temperature Range & Accuracy Plastic Tanks (P-series): From around ambient +5 °C up to ~99 °C. Stainless Steel Tanks (S-series): From –15 °C up to ~120 °C. Itedpfx Abexhfl Esnjk High Stability: ±0.02 °C for stable temperature control. Technical Specifications & Obsolescence The GD120 series includes multiple tank sizes: plastic tanks (P5, P12, P18) and stainless steel tanks (S5, S12, S18, S26, S38), offering varied capacities for different lab needs. This series is now considered obsolete, though it remains functional and reliable for many applications. Supporting Documentation & Manual Operating Manual: The GD120 is covered by the general purpose stirred thermostatic baths manual (shared with GD100), outlining temperature settings, calibration procedures, safety guidance, and maintenance. Datasheet Summary: Positioned within the broader Grant Optima product range, the GD120 sits between simpler (GD100, up to 100 °C) and higher-spec models (GR150 up to 150 °C, GP200 up to 200 °C)

Condition: used, functionality: fully functional, machine/vehicle number: HR34439, Year of construction: 2022, operating hours: 10,026 h, load capacity: 3,000 kg, lifting height: 4,100 mm, free lift: 145 mm, fuel type: electric, mast type: duplex, construction height: 2,745 mm, fork length: 1,600 mm, drive type: Elektro, Electric 4-wheel forklift Chassis number: HR34439 Load center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Duplex Itjdpfewqin Ssx Abnek Condition: Ready for operation and fully functional Technical condition: good Front tires type: Superelastic Front tires condition: 60 - 80% Rear tires type: Superelastic Rear tires condition: 60 - 80% Battery volts: 80V Battery Ah: 775Ah Battery type: PzS Battery year: 2022 Description: Additional equipment on request Sideshifter, fork positioner, Fork carriage with integrated sideshifter, 1070 mm - Class 3 3rd valve, 4th valve, rear work light, front work light, heating, full cab, CE certificate, interior mirror, LED, seat, Pedestrian warning light, LED lights mounted on the mast, Orange hi-vis seat belt with safety lock, Grammer seat, air-suspended, fabric, Speed limit preset at 10 km/h, Yellow beacon - activation via ignition lock, LED work lights, 2 front and 1 rear, with brake, tail and reversing lights, Panoramic mirror, Hose group for 4 functions

Condition: used, Year of construction: 2000, sheet length: 4.100sheet thickness: 12total power requirements: 30weight approx.: 17350messurements (LxWxH): 4750 x 3400 x 2350back gauge: 1000New Price: approx. 100,000 EURO Condition: Used, very good condition Equipment: - Swing cut execution - NC preset control ELGO for rear gauge - Motorized rear gauge up to 1,000 mm on ball screw spindles, foldable - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting edge - Footswitch - Central manual cutting gap adjustment Accessories: - 1 side fence 1,500 mm with scale, T-slot, and tilting bolt - 2 sheet metal support arms 1,000 mm with T-slot - Easy replacement and resharpening of the blades Iedpfowiatvex Abnstk - Adjustable cutting length for efficient processing - Lower blade 4-fold reversible - Upper blade 2-fold reversible Additional Details: - Operating manual in GERMAN - Machine and equipment comply with CE regulations

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 420 kg, total length: 28,650 mm, total width: 15,000 mm, total height: 25,800 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This machine comes with a 24-month warranty. Upon request, we can also offer you a suitable drive-on ramp, a photo cell for black object detection, or the appropriate machine film! About this model: Iodpfx Aozr Higjbnstk Our Profiline is a semi-automatic stretch wrapper that guarantees absolutely consistent results with up to 32 storable programs, thereby reliably eliminating the “human factor”. The electromagnetic brake allows you to precisely set and store the film tension at each stage (bottom wrap, upward wrap, top wrap, downward wrap) within the programs. Within each program, you can additionally specify the speed of the film carriage and turntable. You can also store head wraps, bottom wraps, and the film overlap at the end of the pallet for each program. This allows you to create individual programs for every packing pattern in order to achieve optimum wrapping results every time. The programs can be password-protected, so the operator can only select from the preset programs. With a weight of 420 kg, this model is designed for loads up to 1200 kg (optionally up to 2000 kg). Our Profiline is equipped with a 1500 mm turntable and can wrap pallets up to 2500 mm in height as standard. Automatic pallet detection (via photo cell) is standard, as are adjustable head and bottom wraps. If the wrapper needs to be relocated, it can be easily lifted and moved using integrated forklift slots. This model is our recommendation if you require a professional and robust pallet wrapper for higher volumes, which can be optimally adapted to your needs. Do you need a larger turntable, a taller mast, film pre-stretching, or an automatic film cutting system? With this machine, almost anything is possible! We are happy to configure this machine as a new unit with exactly the options you require. About us: We believe that business is conducted between people! A supplier delivers the goods you ordered—a partner does more: they help you find the best solution, support you in achieving your goals, and assist you in overcoming problems and challenges. This is our conviction. For over 40 years and in the 4th generation, we have been the partner for SMEs in all matters relating to “stretching and adhesive solutions.” On request, we are happy to advise you as to which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: excellent (used), BIO-CIRCLE Type: RWR 80L Auto KST Description: RWR 80 L KST Fully automatic PLC parts cleaning system The RWR systems from Bio-Circle are the optimal solution for cleaning internal circuit systems without dismantling. The unit is space-saving, quiet and very easy to operate. Itodezgclmjpfx Abnok Due to the completely closed system, there is no odor nuisance from the cleaner or the dirty water. External dimensions: approx. 1200 x 800 x 1050 mm Power supply: 400 V 50 Hz, 16A CEE 5p 6h plug Drain: 1 1/4" outlet Technical specifications: Type of contamination: Limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, low quantities Component geometry: Whole components (without dismantling) Quality seals: Stainless steel, service package available Maximum filling capacity: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heater: 4.5 kW Flow rate: 25 l/min Temperature (preset): 60 °C Total weight of the cleaning system without tank filling: 180 kg Application area: The RWR 80 L KST fully automatic PLC has been developed for the field of plastic injection molding and can be used wherever cooling channels (circuit systems, lines) need to be cleaned. Application: Fill the RWR 80 L KST fully automatic PLC with Power Cleaner KST 2.0. Once the minimum fill level is reached and the system is switched on, the system begins to heat up. During the heating-up period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the change of flow direction run automatically, after the instructions displayed on the screen have been confirmed. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We would be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 2020, Lakidis LM 150 Mixer LM150 is a robust machine for mixing meat products entirely made of stainless steel. The bowl can contain 150 lit of product (maximum). The bowl rotates for easy emptying and is designed with a safety lid. If the lid is open, the mixing helical paddle will not operate. The paddle can rotate clockwise and anticlockwise, manually or automatically. In automatic mode the paddle rotates in both directions for a preset time duration. Manufacturer: Lakidis Itjdpfezkgqhox Abnjk Model: LM 150 Year: 2020 Hopper capacity: 150 liter Power: 2,2 kW Machine dimensions LxWxH: 1.300x600x1.300 mm Machine weight: 300 kg.

Condition: used, This listing is for the Grant SAP 2S SUB Aqua Bath The unit is in full working condition and is ready for immediate use The Grant SUB Aqua Pro 2S is a compact, high-performance digital water bath ideal for laboratory applications requiring precise temperature control. Designed to meet the rigorous demands of research, education, and quality control, this model offers a value-for-money solution without compromising on quality or functionality. Key Specifications Tank Capacity: 2 litres (shallow format) Working Area (L x W): 139 x 289 mm Overall Dimensions (L x W x H): 215 x 335 x 150 mm Temperature Range: Ambient +5ºC to 99ºC Stability (DIN 12876-3 @ 70ºC): ±0.2ºC Itsdpfexv Dbbex Abnjk Resolution: 0.1°C Control: Digital, with programmable presets Weight: ~3 kg Voltage Options: 120V or 230V Included: Lid and base tray Safety Features: Dry start/run dry protection Over-temperature alarm High-temperature safety cut-out

Condition: excellent (used), With Sub-spindle With C-axis, with Y-axis With driven tools FANUC/MORI MSX 501 control Turning diameter max 190 mm Turning length -235 mm Spindle speeds 50-5'000 rpm Itedpox I A Awofx Abnek Top turret tool holders 1+2 with 16 driven positions Bar loader FMB Turbo 8-80 Workpiece pick-up device Tool presetting device Misc. accessories MARCELS MASCHINEN CH

Condition: used, Technical details: x-travel: 130 mm y-travel: - mm z-travel: 140 mm machine weight approx.: 107 kg dimensions L x W x H: 0,72 x 0,33 x 0,63 m Concentricity Gauge Device and Presetting Device (table device) - application: measuring device for production components (helical tooth gears), testing and adjusting of milling tools Characteristics: Itjdsu N Apfopfx Abnsk - longitudinal axis approx. 100 mm, Ø 280 mm - tool slides: turning range 360 °, tool holder Ø 30 x 80 mm, size LxW: 200x175 mm, with measuring device measuring rod Ø 8 x 400 mm adjustable - vertical slide: pin gage Ø 20 x 80 mm *

Condition: used, Year of construction: 1998, measuring range X-axis 330 mm measuring range Y-axis 400 mm weight of the machine ca. 0,250 t dimensions of the machine ca. 0,88 x 0,52 x 0,99 m Tool presetter - year of manufacture 1998 Workshop PC - year of manufacture 2008 Label printer - year of manufacture 1999 --> Measuring axes 2 precision guides on both axes in a recirculating ball bearing system with maximum load capacity, each with 2 recirculating ball bearings per guideway, preventthe measuring slides from yawing and pitching. --> Optoelectronic measuring systems Heidenhain LS, centred in both measuring axes for position determination in the centre of the measuring slides. --> Tool holders Hardened SK 50 tool spindle with taper in gauge quality, mounted in precision roller bearings for maximum concentricity and reproducibility. --> Rotation of the tool spindle can be pneumatically clamped at the touch of a button, Positioning 4x 90° for stationary tools via pneumatic index bolts. --> Scanning of cutting edges High-quality profile projector with 150 mm matt disc diameter and 20- x magnification for non-contact measurement and reliable reading of the Itjdpfew Ap Rqex Abnok cutting position in the projector. --> Rotatable and fixed crosshairs for checking the radius and angle of the tool cutting edge. - functional - not in need of repair incl. measuring computer, label printer, screen and keyboard

Year of construction: 2026, condition: as good as new (ex-display), machine/vehicle number: S23Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film Iedpfsykuddox Abnotk F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Condition: used, mileage: 140,278 km, power: 96 kW (130.52 HP), first registration: 05/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 7,030 mm, total width: 2,115 mm, total height: 3,065 mm, loading space length: 4,377 mm, loading space width: 2,044 mm, loading space height: 2,146 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, Errors and prior sale excepted! Internal number: 1082. 2K50928 ----EQUIPMENT * SCHUTZ vehicle body with box body * SÖRENSEN tail lift * Reverse camera * Seat belts: 3-point height-adjustable seat belts with pyrotechnic belt tensioners * ABS * Storage: - Storage compartment under driver’s seat (not with seat base cover) - Storage compartments in front doors - Recess above glove compartment - Storage compartments above ventilation outlets in the center dashboard - Removable container under passenger seat - Right lockable glove compartment (5.3 dm³) - Lockable center storage compartment (11.38 dm³) * Driver’s airbag * Interface box for body manufacturer * Exterior mirrors, incl. integrated side indicators and wide-angle inserts * Mechanical brake assist * Rev counter * Electronic Stability Program (ESP) incl. ASR with indicator - Hydraulic brake assist - Hill holder (automatic hold for hill starts) - Load Adaptive Control (adjusts ABS, ASR, and ESP functions to vehicle load) * Power windows front, with comfort function for driver’s side * Transmission: 6-speed manual * Headrests (3) * Paint: solid color Itodpjyht H Eefx Abnek * Steering wheel with reach adjustment * Manual headlight leveling * Multifunction display with clock, warnings for headlights on and preset speed limit exceeded, and onboard computer * Particulate filter: diesel soot filter * Upholstery: fabric * Radio pre-wiring (cables and antenna) * Black side protection strips * Power steering * Seats: passenger double bench seat with folding table in center backrest * Seats: driver’s seat with longitudinal, height and backrest adjustment, armrest, and lumbar support * 12V socket in center console * Service interval display * Immobilizer with transponder * Central locking with high-frequency remote control ... and much more. ----The vehicle is in unprepared condition! Nationwide delivery available for an additional charge. Errors and prior sale excepted. We are happy to accept your vehicle as trade-in. Financing / Leasing possible even without down payment! Do you have any questions? We are happy to advise you!

Year of construction: 2024, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS04, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Itedpfx Abjv Iqrbenok Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Condition: used, functionality: fully functional, machine/vehicle number: HR34430, Year of construction: 2022, operating hours: 70 h, load capacity: 3,000 kg, lifting height: 5,810 mm, free lift: 1,410 mm, fuel type: electric, mast type: triplex, construction height: 2,645 mm, fork carriage width: 1,070 mm, empty load weight: 3,877 kg, total length: 3,492 mm, drive type: Elektro, construction width: 1,173 mm, Electric 4-wheel forklift Chassis number: HR34430 Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: As good as new Technical condition: very good Front tires type: Superelastic Front tires size: 23x10-12 Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires size: 18x7-8 Rear tires condition: 80 - 100% Battery voltage: 80V Battery Ah: 775Ah Battery type: PzS Battery year of manufacture: 2022 Battery condition: 80 - 100% Iodswlw E Iepfx Abnetk Description: Further data on request Side shifter, fork positioner, Fork carrier with integrated side shifter, 1070 mm - Class 3 3rd valve, 4th valve, rear work light, front work light, heating, full cabin, full free lift, CE certificate, interior mirror, rotating beacon, LED, seat, Orange hi-vis seat belt with safety lock Grammer seat, air suspension, vinyl 5th hydraulic function, controlled by magnetic switch Pedestrian warning light Speed limit preset to 10 km/h Yellow rotating beacon - activated via ignition lock 2 front and 1 rear LED work lights with parking light and brake, tail, indicator and reversing lights Panoramic mirror Hose group for 4 functions (2 additional functions) Accutouch mini lever hydraulic controls

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23SFERA05, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Itjdpfx Aoykty Dobnsk Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 3500mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.