Used Power Sources for sale (39,615)

Condition: excellent (used), Year of construction: 2013, Control system: UNILOG B6 Closing force: 4500 kN Distance between columns: 950 × 700 mm Minimum mold height: 330 mm Maximum mold height: 780 mm Screw diameter: 65 mm Injection pressure: 2070 bar Hodpfjytfqasx Aa Eonp Maximum injection weight: 980.9 g Injection unit: ServoElectric (Knodler) Injection speed: 400 mm/s Servo package S0 ServoPower package S1: hydraulic pump speed control for increased energy efficiency Integrated filter unit: Yes Ejector type: Electric Ejector force: 60 kN Ejector stroke: 180 mm Additional equipment: Air valve Cooling water flow regulator Digital interface for temperature controllers (control of up to 6 thermoregulators) Interface for nozzle needle shut-off control in the mould Interface for external hot runner controller Full integration for Wittmann W8xx series robot Quality control button Language: Polish

Condition: excellent (used), functionality: fully functional, power: 85 kW (115.57 HP), Year of construction: 2021, operating hours: 1,033 h, Equipment: air conditioning, gripper hydraulics, hammer hydraulics, hydraulics, rubber tracks, Schaeff TC125 / Adjustable Boom / 1,033 hrs / Power-Tilt Rotator • Manufacturer: Schaeff Terex • Model: TC 125 • Year: 2021 • Operating hours: 1,033 hrs • Power: 85 kW / 115 hp • Engine: Deutz TD 3.6 L4 • Dozer blade • High and low speed settings • Reversing camera • Power-Tilt • Air conditioning • Radio • Central lubrication system • Swing arm • Hydraulic lines for hammer, grab, and shear • Track undercarriage 90% • Digging bucket: Lenhoff universal bucket CB10M/SW08 • Total weight: 12,100 kg • Quick coupler Hodpsywlhuefx Aa Eonp • German machine • Immediately ready for use • Top condition, like new • This offer is non-binding and subject to prior sale. - Subject to prior sale, - Errors and/or typographical mistakes excepted. - Sale subject to our terms and conditions.

Condition: repair required (used), We are selling several CHP engine and generator units. The generators are in working order. The engines require an overhaul. These are GM V8 engines and ABB generators with 45 kW. Hjdpfx Aezlf N Eja Ejnp A total of 4 engines and 3 generators are available.

Condition: defective spare-parts repository (used), Year of construction: 2022, operating hours: 8,000 h, We are selling a MAN E3262 E302 engine. Unfortunately, the engine has sustained fire damage. The oil pan is cracked. The price is negotiable. Hjdozlf Dijpfx Aa Esnp The internal condition was very good prior to the fire.

Condition: used, Used Siemens SIMODRIVE 611 power module with control unit for CNC and servo applications. Hnedpfx Aezi Dydoa Esp Manufacturer: Siemens Series: SIMODRIVE 611 Product type: Power module / control unit Power module model: 6SN1123-1AA00-0CA1 Control model: 6SN1118-1NH00-0AA2 System: SIMODRIVE 611 Application area: Machine tools Mounting type: Control cabinet Cooling: Air cooling Condition: Used

Condition: used, Year of construction: 2025, functionality: fully functional, machine/vehicle number: SN075360, 12-month warranty Hnsdpfezldumjx Aa Eop

Condition: used, Various pistons / cylinders available. Cevoman bvba. Lenskensdijk 5 Hodpfx Aajzldrfe Eenp 2200 Herentals Belgium

Condition: good (used), Year of construction: 2014, operating hours: 20,000 h, functionality: fully functional, power: 45 kW (61.18 HP), We are selling a complete tensioning system, including the feed mechanism. For an additional charge, we can also sell the sliding floor. The system has already been dismantled and is located in South Tyrol. Shipping is no problem. Hodszldbgepfx Aa Eenp

Condition: new, SAPI high-performance injector blasting cabinet type "T-Rex 140 Double-Power" with integrated cartridge filter system. Combines pressure blasting and injector blasting in one blasting system. A blasting cabinet for all applications! The "T-Rex 140 Double-Power" pressure/injector blasting cabinet can be used either in pressure blasting or injector blasting mode. This allows for even the most difficult blasting work to be carried out. The also integrated injector blasting mode can be used for lighter blasting tasks, saving on expensive compressed air. The blasting mode (pressure blasting or injector blasting) is easily selected using a selector switch on the cabinet base. The compact, combined pressure/injector blasting cabinet has an integrated cartridge filter extraction system. Thanks to the permanently installed filter system, the sandblasting cabinet requires little space and is easily transported using a pallet truck or forklift. The compact design of the blasting cabinet makes it ready for immediate use; all that's required is to connect the compressed air and power supplies and fill it with abrasive. The integrated cartridge filter extraction system ensures optimal visibility in the blasting chamber. At the same time, optimal abrasive cleaning is achieved, allowing the blasting material to be reused as often as possible. The use of state-of-the-art fan technology results in an extremely low power consumption (0.75 kW), making the injector blasting cabinet extremely economical. Our high-performance injector blasting head (fresh blasting head) creates a high negative pressure and thus achieves high blasting performance, enabling fast, economical work with the vacuum blasting cabinet. The blasting nozzle is made of boron carbide and achieves extremely long service life, even when using corundum blasting media. The pressure blasting head is also equipped with a boron carbide blasting nozzle for maximum service life. A modern, energy-saving LED light is mounted on the cabin roof, protected from dust, to illuminate the blasting chamber. This ensures optimal illumination of the blasting chamber and enables fast, fatigue-free, and economical work. Our sandblasting cabinets are constructed from sturdy sheet steel, allowing for a high load-bearing capacity of the work grid. Hnsdpfsupzmusx Aa Ejp All SAPI blasting cabinets comply with all current safety standards and are equipped with a door safety switch that immediately stops the blasting process if the cabinet is opened during blasting. Metal blasting media, cast steel, steel grit, chilled cast iron, stainless steel blasting media, corundum, glass beads, plastic granules, vegetable granules, etc. can be used as blasting media.

Condition: excellent (used), Year of construction: 2021, Used clean air dust collector with frequency converter Year of manufacture: 2021 Max. volume flow up to 10,000 m³/h at the fan Approx. 73 m² filter area Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content of 0.1 mg/m³ safely maintained (wood dust) Models with type-tested rotary valve airlock (FSA) Tested backflow flap Integrated automatic extinguishing system 350+ P Suction nozzle 355 mm Hnsdpfozizz Ssx Aa Ejp Motor rated power 15.0 kW / 3-phase Voltage 400 V / 50 Hz Max. volume flow 10,000 m³/h Rated volume flow* 7,127 m³/h Negative pressure at Vnenn. 3,347 Pa Filter area 73 m² Chip collection volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2,361 Weight 1,074 kg Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: used, Three-phase electric motor, 37 kW, three-phase motor, SIEMENS AC motor, electric motor, squirrel-cage rotor, asynchronous motor Hodpjzin Acjfx Aa Esnp Type 1LE16032BB034GB4 Design V1 Frame size 225S Motor speed 1478 rpm Current draw 66 Amps Motor power 37 kW Mains connection 400 Volts, 50 Hz Shaft diameter Ø 60 mm Shaft end length 135 mm Keyway width in the shaft 18 mm Flange outer diameter 450 mm Centering diameter 350 mm Bolt circle Ø 400 mm - Flange motor with 8 mounting holes Ø 18 mm Overall length of motor housing without motor shaft 660 mm Overall length of motor housing with motor shaft 800 mm Space requirement L x W x H 800 x 400 x 570 mm Weight 300 kg Very good condition - New, unused, from stock clearance

Condition: used, SincoTec Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servo-hydraulic Test Stand – Fully Functional Description: For sale is a Sincotec Power Flow servo-hydraulic test stand from an industrial operation. The system is ideally suited for dynamic and static testing of components and assemblies, e.g., in the automotive, mechanical engineering, or research sectors. Technical Highlights: - Max. test force: 100 kN (up to ±150 kN) - Max. torque: ±2000 Nm (up to ±4000 Nm) - Linear stroke: ±50 mm (max. ±75 mm) - Max. rotation angle: ±50° - Servo-hydraulic control - Control via Sincotec TestPilot / CoPilot software - Includes large hydraulic power unit Dimensions & Test Stand: - Test table: approx. 1.20 × 1.00 × 1.20 m (H) - Total stand height: approx. 3.30 m Hydraulic Power Unit (separate): - Height: 2085 mm - Length: 2714 mm - Width: 1820 mm Hodpfx Aezimb Dea Eenp Fully functional before dismantling Power Supply / Electrical (from nameplates): - Single units / Motors - 230 V / 50 Hz - Drain oil pump: 0.18 kW / 1.5 A - 400 V / 50 Hz (three-phase current) - Traverse: 0.25 kW / 0.79 A - Total weight: approx. 3000 kg Important note: "The table shown in the photos is not included in the scope of delivery." Condition: used Delivery includes: (see photos) (Specifications and details subject to change or error!) For further questions, feel free to contact us by phone.

Condition: used, Type: POWER SWING 20 kN Sincotec Resonance Testing System Power Swing 20 kN Manufacturer Service Performed General Information: For sale is a used resonance testing system Power Swing 20 kN from Sincotec Test Systems GmbH. The test bench was operated in single-shift use, with all maintenance carried out regularly by the manufacturer. Key Features: - Robust design for continuous operation - Precise resonance testing up to 20 kN - Manufacturer maintenance included - Ideal for research, testing, and development applications Technical Data – Test Bench Feature / Value - Overall height of test bench: 1215 mm (without clamping device) - Width of test bench: 2005 mm - Depth of test bench: 1205 mm - Maximum force amplitude: 10 kN - Maximum total force: ±20 kN - Measurement transducer accuracy: min. Class 1 (according to DIN EN 10002-3) Technical Data – Control Cabinet Feature / Value - Overall height of control cabinet: approx. 1800 mm - Table top height: 1080 mm - Width of control cabinet: 650 mm (narrow table top) / 1450 mm (wide table top) - Depth of control cabinet: 700 mm (narrow table top) / 800 mm (wide table top) - Weight: 152 kg (small table top) 187 kg (large table top); with granite plate: 247 kg Site Requirements Feature / Value - Required space: 4.3 × 3.0 m - Required ceiling height: 2.5 m - Floor load capacity: 234 N/cm² Power Requirements Feature / Value - Voltage: 400 V three-phase AC with neutral and protective earth - Phase rotation: clockwise sequence - Voltage fluctuation: ≤ ±10 % - Short voltage dips: < 20 ms - Limits for continuous interference: interference class A according to VDE 0871 - Frequency: 50 Hz ± 1 % - Protective earth / ground resistance: < 0.3 Ω Connection and Fusing Feature / Value - Power supply: 400 V / 50 Hz (clockwise phase sequence) - Connector: CEE plug, 5-pin, 16 A - Fuse rating: 16 A Test bench weight: approx. 3.6 t Hnodpfezii A Djx Aa Eep Max. weight of clamping device: 250 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical specifications!) Further questions can be answered by phone.

Condition: used, SincoTec Type: Exciting Mot Resonance testing system POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance testing system is designed as a two-mass shaker. It consists of an oscillating head, which is excited by an unbalanced motor driven by a frequency-controlled asynchronous motor. The oscillating head is located in the upper part of the machine and generates the dynamic amplitude. The oscillating head is supported by pre-tensioned coil spring supports on the upper crossbeam and is guided centrally. The central load drive is located in the lower part of the machine and applies the static preload with the aid of a gear motor via a spindle drive. The test chamber is located above the clamping table and is bounded upwards by the adjustable crossbeam. The EXCITING MOT control system controls the testing system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the testing system: Overall height of the testing system 1840 to 2240 mm Height of the machine table 1030 mm Width of the testing system 800 mm Depth of the testing system 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. Class 1 (according to DIN EN 10002-3) Weight of the testing system approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Hnedezii Awopfx Aa Esp Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAL 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (clockwise rotating field) Connection plug CEE socket, s-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase current with PE conductor and protective earth, clockwise rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent disturbances Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Protective earth Grounding resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Trumpf Type: TruDisk 4002 / W20.HL29 Trumpf TruDisk 4002 laser source with KLH cooler The Trumpf TruDisk 4002 laser source is an industrial disc laser from TRUMPF, characterized by high power, beam quality, and efficiency. It is often used for welding, cutting, and other material processing applications. Maintenance has been performed regularly. Unit consisting of laser source with associated cooler, but without optics and fiber optic cable. Technical data Laser power: 4,000 watts (4 kW) (minimum 80 W) Wavelength: ~1030 nm (infrared range) (Yb:YAG) Beam quality (BPP): typically ≤ 8 mm·mrad Fiber connection: TruDisk lasers usually have multiple fiber connections Cooling: Water-cooled – via a KLH cooler Hjdeziivkjpfx Aa Esnp Dimensions: 1.0 x 2.0 x H1.6 m (laser) + 1.0 x 1.5 x 1.8 m (cooler) 380 V -10 % ... 460 V +10 %, 3AC + PE 23 kW / 25 kV A - 34 A / 400 V 50 ... 60 Hz KLH cooler: The KLH cooler is an industrial liquid cooler that ensures heat dissipation from high-performance laser systems such as the TruDisk 4002. Typical characteristics: Water-water cooling Precise temperature control (typically 20–25 °C) Refrigerant: R 404A Can be controlled via TRUMPF interface Necessary to meet laser specifications Device type W20.HL29 Weight: 850 kg (laser) + estimated 550 kg (cooler) Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 1999, operating hours: 356 h, BT Model PPS 1200 MX / 1 The BT PPS 1200 MX / 1 is an electric high-lift pallet truck manufactured by BT, designed for internal material transport. This model is characterized by its compact design and high maneuverability, making it particularly suitable for use in narrow storage areas, shops, and small production facilities. Key technical features: Load capacity: 1,200 kg Lifting height: approx. 2,700 mm Fork length: approx. 1,150 mm Drive: 24V electric drive Hnjdpfsziivdjx Aa Eop Battery: 24V Model year: 1999 Operating hours: approx. 356 hours The pallet truck is still in use, so the actual operating hours may vary slightly at the time of purchase. Battery replaced in October 2022. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), Year of construction: 2012, Heating output: 275kW, electrical output: 201kW, fuel: natural gas, engine: MTU E 3066 L3, engine cylinders: 6, overall efficiency: approx. 82%, generator rating: 276kVA, machine dimensions X/Y/Z: approx. 3550mm/1800mm/2100mm, weight: approx. 4500kg, operating hours: approx. 57557h. Documentation available. An on-site inspection is possible. Hnodpfx Aszk I U Usa Ejp

Condition: used, Year of construction: 2021, operating hours: 7,150 h, Z-linkage Michelin XLD D2A L5 23.5R25EM tires Air conditioning Hnjdezky Tiepfx Aa Eop Lift arm assembly (Z-linkage) 2750 mm Including bucket 2750 mm Location: Passau

Condition: excellent (used), EA Elektro Automatik Model: EA-PS 8080-170 3U EA Elektro-Automatik EA-PS 8080-170 3U 19" Rack – Laboratory Power Supply 0-80V / 0-170A, 5000W For sale is a high-quality programmable laboratory DC power supply from the renowned manufacturer EA Elektro-Automatik GmbH & Co. KG. This is the EA-PS 8080-170 3U model with an output power of up to 5000 W. Key features: - Autoranging (flexible combination of V/A up to maximum power) - Remote sense (up to 2.5 V compensation) - Low ripple: < 10 mV RMS / < 100 mV pp - Multiple interfaces for external control: USB, RS-232, CAN, LAN (Ethernet), GPIB (IEEE488), Profibus - Analog control (0–5 V / 0–10 V) - Fan-cooled, robust industrial design Technical data: - Output voltage: 0 … 80 V DC - Output current: 0 … 170 A - Maximum power: 5 kW - Construction: 19" rackmount, 3U - Efficiency: approx. 93% - Weight: approx. 20 kg Scope of delivery (see photo): - EA-PS 8080-170 3U power supply - Power cable Hodpfxszibh Es Aa Esnp (Specifications and technical details subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: new, FORD Emergency Power System Hedey U Dr Tepfx Aa Esnp

Year of construction: 2008, condition: excellent (used), Traypacker Power Food Capacity: 14,400 cups/hour, 125g/cup, used – in very good condition Technical data: Production capacity: 40 cartons/minute 6 cups/tray = 240 cups/minute = 14,400 cups at 125 g/cup Year of manufacture: 2008 Dimensions: Blanks – L x W x H: 698.5 x 168.0 x 1.5 mm Lids – L x W x H: 95.5 x 95.5 x 9.0 mm Cups – Diameter x H: 92.5 x 42.0 mm Hedpsd Rwwbefx Aa Eenp Machine dimensions: L x W x H: 7500 x 7400 x 3000 mm Weight: approx. 6,800 kg New price: €950,000

Year of construction: 1992, condition: used, more powerful Rexroth Hnodpfx Aoxr Uriea Ejp 2 pieces

Condition: excellent (used), For sale is a used Hammer A3-41 Silent Power surface planer and thicknesser with a jointer length of 1800 mm. The machine has been checked by our specialized staff and is in very good condition. Technical data: - Silentpower spiral cutterhead - Planing width 410 mm - Jointer length 1800 mm - Max. clearance 230 mm - Motor power 4 kW / 5.4 HP - Suction connection Ø 120 mm Hnedpfx Aajwqq Dhj Esp - Year of manufacture 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: jointer, thickness planer, planer, jointing, thickness Reference: R-A0117

Condition: used, Quantity: 2 available Used Siemens SIMODRIVE 611 drive system consisting of a power unit and a control unit for industrial CNC and automation applications. Manufacturer: Siemens Series: SIMODRIVE 611 Product Type: Power unit / Control module Hnedpfozh A N Iex Aa Eep Power unit model: 6SN1123-1AA00-0HA1 Control unit model: 6SN1118-0NH00-0AA2 Application area: CNC drive technology Design: Module Mounting type: Control cabinet mounting Cooling: Air cooling Interface: DRIVE-CLiQ not available Condition: Used

Condition: used, “Removed from a production facility of an automotive supplier, professionally dismantled.” Quantity: 3 available Designation: Camtec HSEUIreg 04801.18T Manufacturer: Camtec Power Supplies GmbH Device type: DIN-rail switching power supply with programmable output Input voltage: - 90 to 132 V AC / 184 to 265 V AC (47–63 Hz) - 250 to 375 V DC Output: - Output voltage: 0 to 18 V DC (programmable) - Output current: 0 to 40 A (programmable) - Output power: 480 W - Output voltage tolerance: ±0.5 % Interfaces: - Analog control: 0–10 V or 0–20 mA - Remote sense function - DC-OK signal Protection functions: Hedpfx Aozh A Nzea Eonp - Overload protection - Overtemperature protection - Short-circuit protection - Overvoltage protection Insulation voltages: - Input to output: 3000 V AC - Input to protective earth (PE): 2500 V AC - Output to protective earth (PE): 500 V AC Mechanical data: - Housing: Metal, protection class IP20 - Dimensions (W x H x D): 130 x 200 x 115 mm - Weight: approx. 2.9 kg - Mounting: DIN rail Environmental conditions: - Operating temperature: -20 °C to +70 °C