Programmable AC power regulator, programmable AC power source, laboratory power supply, power supply

CHROMA 6415

Condition: used, Programmable AC power source voltage regulator Laboratory Power Supply, Power Supply, Programmable AC Power Source CHROMA Type 6415 : 64150296 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values- Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. Output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output cut-off relays - EEPROM memory for user-defined voltage and frequency combination for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Over voltage, under voltage, over power, over current, over temperature and short circuit protection - Temperature-controlled fan speed - Self-test when switching on - Supplied as shown, without additional accessories and connection cable Additional connections: - BNC (EXT VREF) - 9 Pol. D-Sub (RS-232C interface) - 24 Pol. Centronic (GPIB) Cedpfx Aedz Srasa Eepw Space requirement H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts Cjdpfx Aasxq Hhye Eopw - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: LZ280/3, turning diameter over cross slide: 190 mm, spindle bore: 43 mm, turning diameter: 330 mm, turning diameter over bed slide: 330 mm, center height: 165 mm, turning length: 670 mm, quill stroke: 90 mm, quill diameter: 45 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 30 rpm, GDW precision lathe LZ 330 V EconomyLine The LZ 330 V EconomyLine is a powerful lead and feed spindle lathe with stepless speed control from 30–4000 rpm. The standard paint finish includes RAL 7035 (light gray) for the housing and RAL 7016 (anthracite gray) for the substructure, splash guard hood and chuck guard. Equipment & accessories: ✅ 3-axis position indicator with 6" color display ✅ Quick-change tool holder Multifix A including 1 turning tool holder ✅ Coolant system & central lubrication ✅ Chip tray, splash guard & spindle brake ✅ LED machine light & collet board K32 ✅ Electromechanical limit switch device for thread/feed ✅ Tool cabinet with telescopic extension including operating tools Cpedpfx Aaov Dan Dj Eow Additional equipment package (optional): ➕ Three-jaw chuck Ø 160 mm (up to 4,600 rpm) ➕ Keyless drill chuck (3-16 mm, B16/MK3) ➕ Live center MK3 & drill bit holder ➕ 4 additional turning tool holders & 1 drill bit holder 📦 Delivery: ✔️ Disposable packaging & safe transport including insurance Perfect for precise and demanding turning operations in industry and trade! 🚀

Condition: new, Centre length ----- 1000 mm Centre height ----- 180 mm Swing diameter ----- 360 mm Main spindle bore ----- 40 mm Bed width ----- 260 mm Spindle speed ----- 40-1800 rpm Motor ----- 2.4 kW Cpsdpfx Aaega Ty Eo Eew Weight ----- 1350 kg INCLUDES * 3-axis digital readout brand SINO * Quick-change toolholder type Multifix TOOE5 with 4 tool blocks * 3-jaw chuck 200 mm * 4-jaw chuck 200 mm * Faceplate 250 mm * LED work lamp and coolant system * Fixed and travelling steady rest HEAVY-DUTY DESIGN WITH CAST IRON BASE

Condition: new, Bernardo drill grinding machine DG 32 Pro Specifications Drill diameter 2 - 32 mm point angle 90° - 135 Speed 4800 rpm Motor power 0,25 kW Voltage 230 V length 350 mm Cpjdpjgd H U Usfx Aa Eew width 210 mm height 305 mm Weight approx. 32 kg Scope of delivery - Diamond grinding wheel SBC - Collets ER 20, 3 - 12 mm, 10 pcs. (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 mm) - Collets ER 40, 13 - 32 mm, 20 pcs (13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 28 / 29 / 30 / 31 / 32 mm) - Collet holder ER 20 resp. ER 40 Features - Including device for pointing, i.e. better centering of the drill tip on the workpiece and reduction of the necessary feed force - 30 pcs. ER collets included in the scope of delivery, which are also suitable for clamping intermediate sizes - Additional station for relief grinding of the drill cutting edges (clearance angle) - Universally adjustable point angle from 90° - 135 - Rotor with precision ball bearing ensures very smooth operation - Fast and precise working results due to simple operation - Vibration-free running due to high dead weight and rubber feet

Condition: good (used), Year of construction: 1992, machine/vehicle number: 145 K, Offer 24018 Technical data: Cpodpfx Aou At Thsa Eow - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drill spindle holder MK 3 - Drill spindle stroke 150 mm - 9 drill spindle speeds 104 - 1400 rpm - 2 feeds 0.1 / 0.2 mm/rev - throat depth 290 mm - max distance table - drill spindle 780 mm - Table with 2 T-slots 480 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 1.1 / 1.3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - right - left rotation - Coolant device - Quick-action drill chuck 1-13 - lighting

Condition: good (used), Year of construction: 1989, functionality: fully functional, feed length X-axis: 650 mm, feed length Y-axis: 400 mm, feed length Z-axis: 230 mm, spindle speed (max.): 3,000 rpm, For sale is a surface grinding machine of the brand Okamoto, type PSG 52 UDX The machine is well-maintained and ready for immediate use Technical data: Year of manufacture: 1989 Grinding area: X-axis: 650 mm (manual) Z-axis: 230 mm Y-axis: 47 mm – 400 mm Max. height movement lower edge of new wheel (with ¯ 205 mm) min./max. - table) Grinding wheel ¯: Maximum ¯ 225 mm. Speed range: 3000 rpm (stepless speed control) Table feed: 0.3 – 25 m/min (hydraulic in X-axis) Cedownnbrjpfx Aa Eopw Table area ground: 550 x 200 mm Magnetic chuck: 500 x 200 mm (standard size) (Load incl. magnet max. 200 kg) Transport and loading can be arranged on request, for an additional charge, Europe-wide. Prices plus VAT Viewing possible by appointment. Contact us, our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or ways to contact us, visit our website

Condition: new, Center length ----- 1000 mm Center height ----- 230 mm Turning diameter ----- 460 mm Passage of main spindle ----- 58 mm Bed width ----- 300 mm Spindle speed ----- 25-2000 rpm Motor ----- 5.5 KW Weight ----- 1750 kg INCLUDING * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOB2 with 4 attachments * Self-centering 3 chuck 250 mm * Independent 4 chuck 320 mm * chuck 350 mm Cpodpfxek Iug Te Aa Eew * Fixed and moving grips * LED work light and cooling system * Electric brake (CE) * Foot brake * Box with various tools

Condition: used, Year of construction: 1985, x-travel 485 mm y-travel 385 mm z-travel 380 mm Cpjdpfx Aastqqlls Esw table surface area 800 x 460 mm spindle taper SK 40 control CONTOUR 1 spindle turning speed range 50 - 2500 U/min feeds 10 - 1000 mm/min rapid traverse 2 m/min table load capacity 600 kg quill stroke 80 mm total power requirement 7,5 kW weight of the machine ca. 2,0 t dimensions 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels -

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall Csdjwrm Dtjpfx Aa Ejpw >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.