Used Powder Packing for sale (3,772)

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: KAP1, air demand: 16,000 m³/h, power: 36 kW (48.95 HP), suction capacity: 16,000 m³/h, Equipment: cabin, Dielectric automatic powder booth KAP1 Price: PLN 492,693.30 + VAT Electrical and energy data • Voltage: 400 V (3P + N + PE) • Power connection: 36.34 kW • Pneumatic connection: 1" • Air pressure: min. 6 bar • Air quality: oil < 0.1 mg/m³, water vapor < 1.3 g/m³ • Air consumption: 1710 Nl/min (operation) • Compressor: SC-30 • Air tank: 1800 L Painting parameters • Painting speed: 1933 mm/min • Part dimensions: 800 x 1800 mm • Hanger height: 500 mm • Coating thickness: 100 µM • Gun array: vertical Technical data and configuration Gkodpfsv Rpx Sox Akyjc • Design: dielectric plastic • Passage dimensions: 1000 x 2400 mm • Air flow: 12348–16000 m³/h • Powder center: ProfiCenter CP02 • Manipulators: 2 pcs. • Guns: 8 automatic, 2 manual (ProfiSpray) • Part detection: yes (height, width) • Systems: cyclone separator, ProfiControl, beam pulling • ATEX: zone 22, II 3D Platforms and cabin body • Platforms: entry, exit, stainless steel floor, anti-slip stairs • Housing: dielectric plastic, LED lighting, slots for manipulators Air knives and suction channel • Automatic floor cleaning • Suction channel with pneumatic flap Gun blow-off and control • Automatic blow-off guns • 10" touch panel, 50 programs, manipulator control, dust extractor, drive speed X-axis and part pulling system • Automatic gun setting • Part pulling: speed 570–2830 mm/min, 2 pullers The machine also includes: • ProfiSpray A applicator • PSS-1 controller • PM-1 guns • ProfiCenter CP-02 powder center • CK-D1400L cyclone dust extractor • MA1-180 manipulator and MX1-10 X-axis • OZ-12H dust extractor • ProfiControl 10" control • BP-H2000 W900 part measuring system

Condition: good (used), Year of construction: 1990, functionality: fully functional, For sale is a complete, fully operational powder coating system, year of manufacture 1990. Gkodjw Ek Ntjpfx Akyjc Over the past few years, numerous system components have been modernized or completely replaced and upgraded. The system was decommissioned in Q1-2025, but can be reactivated and operated at any time if required. All components remain on standby and can be started up and demonstrated on site. The system features one manual and two automatic spray booths (which can be operated simultaneously). The maximum workpiece dimensions that can be coated across all booths are 7000x2300x800 mm. The entire conveyor system is supplied by CSF. All system controls, including a visualization system, all control cabinets, all frequency inverters, as well as many other components have been completely renewed within the last 5–7 years. There is no maintenance backlog; the system has been regularly and meticulously serviced by our own maintenance department and the respective manufacturers. A detailed description can be provided upon request. Price on request!

Condition: excellent (used), Year of construction: 2009, operating hours: 3,350 h, functionality: fully functional, total length: 21,000 mm, total width: 1,200 mm, total height: 3,250 mm, type of input current: three-phase, input voltage: 380 V, feed rate X-axis: 12 m/min, working width: 270 mm, We are selling our fully automated packaging line by CSP Engineering due to production expansion and renewal of our machinery park. The packaging line is engineered for maximum output, precision and reliability in industrial production environments. The line is currently functional in production. Main features - Automatic counting system - Automatic label application with package quantity indication - Integrated folder insert system inside each package - Automatic wrapping and strapping system - Integrated measuring system - High production efficiency: up to 150 m2 per hour - Suitable for long profiles Technical specifications Gkjdpfey Rfftex Akyjc - Maximum plank length: 3100mm - Maximum plank width: 270mm - Widest point of the complete line: 3100mm Machine configuration and power requirements 1. Strapex system - 5.6 AMP 2. Parscan System - 10 AMP 3. Packaging Machine - 6 AMP 4. Oven - 40 AMP 5. Destacker - 25 AMP The line can be inspected in operation and is immediately available upon agreement. Keywords: Labeling, Destacking, Stacking, Strapping, Packaging, Packing, Parquet, Wood, Wrapping, Folder, Shrinking, Shrinkoven

Condition: ready for operation (used), Year of construction: 2008, Nordson AltaBlue 10 TT (10/4; 10 litre/max. 4 hoses): The Nordson AltaBlue 10 TT is a compact 10-litre hot melt adhesive applicator designed for precise adhesive dispensing in industries such as packaging and product assembly. The 'TT' model denotes the 'Table Top' version, recognised for its user-friendly interface and low-maintenance construction. This unit supports up to 4 hose connections. Key Specifications: - Capacity: 10-litre tank for hot melt adhesive - Pump System: Gear pump driven by a variable-speed AC motor - Temperature Range: Adjustable from 40°C to 230°C (100°F to 450°F), with a stability of ±0.5°C - Maximum Pressure: Up to 75 bar (1100 psi) hydraulic working pressure - Filtration: Incorporates a Saturn basket-style filter to prevent contamination of the application heads Features & Benefits: - Non-stick Tank: The tubular tank features a Teflon coating to eliminate 'dead spots' and minimise adhesive degradation (burning) - Key-to-Line Functionality: Pump speed can be synchronised with the production line speed for consistent adhesive output Godpfx Aoy N Dbwskyjkc - Easy Maintenance: Accessible panels and a large tank opening make refilling and cleaning straightforward - Connections: Capable of supporting up to 2 or 4 hose/gun sets, dependent on specific configuration (single or dual stream)

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: AC, total length: 6,750 mm, total height: 3,350 mm, total width: 3,700 mm, input voltage: 380 V, overall weight: 2,660 kg, compressed air connection: 6 bar, warranty duration: 12 months, year of last overhaul: 2036, roll width: 500 mm, film width: 500 mm, power: 6.2 kW (8.43 HP), product height (max.): 2,235 mm, product height (min.): 150 mm, product length (min.): 1,250 mm, The modern and optimal solution for window packaging. The window manufacturers often have difficulties and issues with packaging process, especially in large sizes. Lifting up, turning and moving the window makes job very hard, slow and dangerous. FRAMEWRAP is that solution which make the process easy, fast and safe. This equipment is designed specifically for those production areas where the window production process is run in an inclined way. The machine could be integrated to the production lines where the window will be fed to the wrapping station without changing the position of the window. The machine has motorized feeding system with automatic press unit which can fix sized dimensions of window. Godpfxjy N S R Ho Akyskc

Condition: used, Webomatic Mobile Double Chamber Vacuum Packer Type: CD 120-PR Serial number: 5710JL525 400 V, 3 Ph, 50 Hz, 5.0 A, 2.2 kW Seal length: (2x) 640 mm Dimensions chamber: (2x) 650 mm x 570 mm Busch vacuum pump Total dimensions: 1420 mm x 840 mm x 1060 mm. Gkodpfeym U Inox Akyec

Condition: new, Year of construction: 2020, SEE photos + PDF layout ATTACHED 1 NEW CSP Aut. complete parquet shrink foil packing line (year 2020) never in use. Gksdpfoypb U Tex Akyjc TOTAL LINE consisting of: roller track + industrial parquet scanner + strapping machine + shrink foil packing line AVM 700 + roller conveyor + heating unit + aut. labelling + collect accumulator with double lenght cross conveyor. (see pdf layout)

Year of construction: 2026, condition: refurbished (used), OFF-LINE Packing line .90.4.F Made by MAIR Revamped 2026 Scope of supply: 1 New chain transport system, with 4 lifting chains, to collect the tubes from the roller conveyor. 2 Automatic tube by tube feeding unit 3 Single Row preparation section 4 Automatic bundle formation unit, with interchangeable: Gkjdsymav Rspfx Akysc - 4 Bundle holding support for square bundle - 4 Bundle holding supports for hexagonal bundle 5 Strapping bridge with manual strapping unit Signode 6 Movable carriage for frontal extraction of finished bundle 7 Finished bundle storage unit 8 New Electrical control panel with operator control desk 9 New emulsion draining & bundle weighting system Tube diameter (Round): 16 - 90 mm Tube diameter (Square): 16×16 – 80×80 mm Tube diameter (Rectangular): 20×16 – 80×40 mm Squares bundles: 250×250 – 500×500 mm Hexagonal bundles (size of side): 150mm – 350mm Bundle weight: Max. 2Tn

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, Equipment: documentation/manual, The Table Top Print bagging machine enables efficient packaging and sealing of products in pre-made bags and is suitable for various formats. The machine is easy to operate and features a user-friendly display for setting up, saving jobs, and controlling operating parameters. For maximum flexibility, it offers automatic and manual operating modes with a secure sealing bar. Training a packaging operator takes less than five minutes. Gkjdpfx Akexlzr Ajyec With integrated thermal transfer printing technology, bags can be directly printed with high-resolution graphics, text, and barcodes—eliminating the need for separate labeling. Features: - Multi-color display for straightforward settings - Pre-selection of desired product quantity for packaging - Integrated total product counter (with reset function) - Roll change in under one minute - Sealing via foot pedal, automatically, or manual push-button - Feed systems for automatic bag filling available on request Technical Parameters: 1. Maximum bag length: 450 mm 2. Maximum bag width: 250 mm 3. Maximum bag thickness: 0.04–0.1 mm per layer 4. Packaging speed: up to 25 units/minute 5. Supply voltage: 1Ph. 220V 50Hz 6. Power consumption: approx. 1 kW 7. Machine weight: approx. 70 kg (including printer) 8. Machine dimensions: approx. 670 x 665 x 860 mm 9. Print area: 53 x 75 mm 10. Bag type: wicketed bags on rolls Base machine: €12,500 + Thermal transfer printer: €5,500 + Label dispenser: €2,900 + SATO label printer incl. dispenser: €6,500 to €9,000

Condition: used, machine/vehicle number: 008792, Position 1: Panel Feeding and Loading LCR-FLEXPACK Position 2: Roller Conveyors LCR-FLEXPACK Position 3: Roller Conveyors LCR-FLEXPACK Gkodpoz Nx E Hofx Akyoc Position 4: Cardboard Closing Stations LCR-FLEXPACK Position 5: Robot LCR-FLEXPACK

Year of construction: 2011, condition: excellent (used), Packer Brand Redpack Model P325D Year of manufacture 2011 Voltage 380 V Gsdpfx Aov Ur Nzskyskc Dimensions 5400 x 2000 x 1200 mm Weight 1500 kg

Condition: used, functionality: unexamined, Ferwood Code: RU0001320 - Manufacturer Code: CACR-SR03BE12G-E - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Gkjdpsv Du Niofx Akysc

Condition: new, Year of construction: 2026, ### 🔫 ProfiGun PM-1 powder gun Lightweight, ergonomic, perfectly balanced with a contoured grip. ✋⚖️ Adjust powder output and switch programs directly on the gun. 🎛️ Ceramic cascade up to 100,000 V for efficient charging of all powder types. ⚡ New-generation nozzles improve penetration on complex parts. 🎯🧩 Profiled nut for a secure grip + conductive handle for excellent operator grounding. 🔩🧤 Impact-resistant materials, fully demountable design, replaceable powder path tube. 🛡️🛠️ Patented in the EU and US. Polarity: negative. 🇪🇺🇺🇸➖ One-piece powder path + quick-release hose coupling reduce leaks and speed up hose changes. 🔌✅ ### 💨 ProfiJector powder pump Efficient injector with an optimized feed angle validated by research. 📐🔬 Lower powder and air consumption vs. right-angle injectors, with low running costs. ♻️📉 European patent protected. 🏅 ### 🖥️ PSS controller - 7" touchscreen 7-inch glove-friendly touch panel. 🧤📲 3 auto programs: overcoating, hard-to-reach areas, flat surfaces. 🔁 Fine tuning: 0.1 kV and 0.1 uA resolution. 🎚️ Advanced pneumatic valves for precise air dosing (patent pending) + real airflow measurement to detect drops or blockages. 💨📈⚠️ Diagnostics, program naming, external control via Modbus. 🧠🔧🔌 ### ⚡ ProfiCharge ceramic cascade (made in Poland) High-precision ceramic cascade up to 100,000 V, manufactured in Poland. 🇵🇱⚡ High-frequency ion emission (up to 17,000/sec) improves charging - less powder to the collector, more on the part. 🎯📉 Ultra-precise current control: 0-100 uA, stable even below 10 uA (0-10 uA focus with 0.1 uA steps). 🎛️ ### 💨 Air and application quality features Electronically controlled needle valves + integrated flowmeters for real-time, precise air delivery. 💨✅ Gsdoyfik Iepfx Akyjkc Adjustable electrification curve for different powders and demanding parts. ⚙️🧩 Non-stick, puncture-resistant nozzles resist electrical breakdown, reduce clogging, and simplify color changes. 🧼✨ Automatic gun purge (from handle or screen) for faster, cleaner color changes. 🔁💨 ### 🛡️ Safety and compliance Discharge energy below 2 mJ + antistatic hose with double grounding strap. ⚠️🔒 ATEX and EN 50050-2 compliant for potentially explosive areas. ✅ ### 🧠 Productivity and support Quick Program: fast switching via rapid trigger presses. ⚡🎛️ Visual wear counters + fault history, suggestions, and self-monitoring diagnostics. 👀🔧 Up to 8 languages: PL, EN, DE, FR, RU, ES, IT, SV. 🌍 Animated troubleshooter for guided diagnostics. 🧭 Professional mode (hints on/off) + daily and job statistics for order management. 📊⏱️✅

Year of construction: 2016, condition: good (used), for sale: Complete Niverplast packaging line Year of manufacture: 2016 1. Manual infeed Niverplast 2. Depanner for baguettes from AUXPAMA 3. Metal detector 4. Reject system 5. Counter + speedbatcher Niverplast 6. Combiplast Niverplast 7. Boxloader Niverplast 8. Varioseal Niverplast 9. Metal detector 10. Pallet sealing device 11. Conveyor systems Niverplast Full documentation, layout, and specifications available. If you have any questions or comments, please feel free to contact me. Inspection on site is also possible. Dismantling and transport can be offered. Gkjdpjx Ari Hofx Akyjc Kind regards, Leo Holland

Condition: used, Board repacking line Manufacturer: PlanSel/Nordautomation Pack chain conveyor Tilt hoist Board elevator Edge cutting system Measurement system Stacker with spacers Gkodpfxjykauzs Akysc Outfeed chain conveyor Boards till 6 m

Condition: used, Year of construction: 2016, functionality: fully functional, total height: 3,900 mm, total length: 15,500 mm, The machine underwent a major overhaul in 2026 for approximately 20,000 euros. The system features large carton magazines with a stacking height of 2200 mm. The machine has a large waste management system. The Nextmode has 5 magazines arranged in a row and an SbS function, allowing up to two widths of continuous corrugated board to be placed side by side in each magazine. The system has 8 longitudinal tools for highly flexible production of cardboard packaging. In addition to the standard creasing tools, the system also has a fine perforation technology in all tool groups. Godpfx Akoz A Edzoyjkc The system is currently still in operation and can be inspected upon request. It can handle cardboard grades up to 2.9 BC flute (thickness approx. 7 mm). The machine will be available from approximately November 2026. A price quote will be provided upon request.

Year of construction: 2015, condition: good (used), Parts shown by hand not come. Gsdpez Atbwjfx Akyskc

Condition: new, total length: 4,500 mm, total width: 8 mm, PB-Strapping strapping band, 8mm, length 4500m, core 200, black We offer the PB-Strapping strapping band. Manufacturer: PB-Strapping Type: 8045 Order number 0365512 272 Color: Black Tensile strength: 910 Core dimension: 200 Ø internal (mm) Width (mm): 190 Length / spool: 4500 m ⭐ Condition: New Gedpfx Asza Dmyokyokc Scope of delivery as shown in the picture 9 pieces available. Price: Per piece Shipping is possible, but the buyer pays the shipping costs. Shipping: €9.95

Condition: like new (used), Year of construction: 2002, functionality: fully functional, total width: 600 mm, total height: 1,540 mm, total length: 1,420 mm, Automatic strapping machine for plastic strapping Frame dimensions: 850x600 mm Gkedpfxjz Ibqhe Akyec

Condition: like new (used), functionality: fully functional, mileage: 35 km, power: 9 kW (12.24 HP), fuel type: electric, gearing type: automatic, axle configuration: 2 axles, maximum load weight: 1,500 kg, number of seats: 9, Year of construction: 2019, operating hours: 6 h, Equipment: disability-friendly, power assisted steering, tail-lift, wheelchair accessible, Electric shuttle bus suitable for wheelchair users, with a wheelchair ramp at the rear, or for parcel delivery. Can be used on public roads without registration. The wheelchair ramp can be removed. Large cargo capacity, both in cubic meters and weight. Long range due to a dual battery pack. Gkedpsz Ehbbefx Akyoc This is a demonstration model with low mileage.

Condition: excellent (used), Corner sealing machine with shrink tunnel For sale is a professional, semi-automatic corner sealing machine with an integrated shrink tunnel from the Italian quality manufacturer Pactur. It is ideal for quickly and professionally shrink-wrapping cartons, books, bottles, textiles or other packaged goods in shrink film. The Ladypack 80/SI model is characterized by its enormous flexibility and very large sealing frame. It combines the sealing and shrinking processes in a compact, mobile unit, which saves a great deal of space in the production hall. Impulse sealing system: The corner sealer uses a Teflon-coated sealing bar. It produces clean, extremely tear-resistant seams without smoke development. Efficient shrink tunnel: The integrated tunnel has a closed recirculating air system with adjustable air deflection plates. This ensures a completely uniform heat distribution and a perfectly smooth shrink result – even with demanding product geometries. Precise digital control: The clear control panel allows the sealing time, cooling time of the sealing bar and the tunnel temperature to be precisely adjusted to the film thickness used (PO, PE or PVC). Heavy-duty conveyor belt: The tunnel is equipped with a durable, heat-resistant metal grid belt. It reliably transports even heavy packaged goods (e.g. printed materials, canned goods or wooden parts). Ergonomic infeed table: The separate, mobile preparation table enables quick loading of products into the half-tube film. The film unwinding is smooth and easy thanks to ball bearings. Gsdpfsz Dtf Aox Akyskc Perfectly suitable for printing companies, logistics centers, laundries or contract packers for shrink-wrapping: - Cartons and multi-packs - Books, catalogs and stacks of magazines - Textiles and household goods - Bottle carriers and cans Technical data & equipment: Manufacturer: Pactur (Made in Italy) Model: Ladypack 80 series Type: Corner sealer & shrink tunnel combination Sealing frame dimensions: approx. 560 x 800 mm (for medium to large packaged goods) Control: Digital control unit for precise adjustment of sealing time and tunnel temperature Transport: Robust and heat-resistant metal grid belt in the shrink tunnel Power supply: 380 V / 3 phases Max. power consumption: 11.5 kW Mobility: The entire system and the separate infeed table are mounted on stable swivel casters Max. film roll width 700 mm Max. film roll diameter Ø 250 mm External dimensions (length x width x height): approx. 1,800 mm x 2,000 mm x 1,120 mm Max. product height: approx. 150 mm (due to the design in the tunnel passage) Net weight: approx. 400 kg "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: gas-cooled -Length: 8 m -Connector: 4-pin -Dimensions: 400/400/H80 mm Gjdez Dtqrjpfx Akyjkc -Weight: 3.6 kg

Condition: good (used), TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled -Length: 8 m -Connector: 4-pin Gjdpfxjz Dtuwj Akyekc -Transport dimensions: 400/400/H90 mm -Weight: 3.2 kg

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, total length: 3,600 mm, Model NO. HB-800 PAPER BOX ERECTING MACHINE Application Commodity, Gifts & Arts, Dining, Medical, Food Driven Type Electric Specification 3600 x1400 x 1700 mm Production capacity: 40-160 pcs/min Suitable Material: 200-600gsm card paper,PE coated paper, kraft paper, corrugated paper(up to 1.5mm) Gkedpfxoz Iqfho Akyoc Paper open length: L100-450mmdegree:5°-40° Paper open width: W100-600mm HeightH15-200mm (for special sizes can be customized) Total power - 5kw Total weight 1.8 ton

Condition: excellent (used), Year of construction: 2011, Robust, Right-Sized Packaging System Automated machine for cardboard packaging, Cardboard cutting machine, Cardboard die-cutter, Cardboard manufacturing machine Packsize EM7-25 MT, year of manufacture 2011 Weight EM7-25: 4,500 lbs EM7-35: 5,500 lbs Footprint with Bales EM7-25: 15' 8" x 10' 2" EM7-35: 15' 8" x 13' 5" Unlimited number of cardboard sizes and styles 15’ 8″ x 13’ 5” Fully-loaded footprint Max. 4 plies of corrugated cardboard in various grammages The EM7-25™ is a patented, automated machine for the “On-Demand Packaging” process, designed for use in a wide range of industries. The EM7-25™ system, developed in Sweden, offers a range of advanced features for cardboard production, including longitudinal and transverse cutting, scoring, perforating, and die-cutting of handles and openings. The machine supports the “Lean Packaging” concept and also enables material feed in the reverse direction (so-called *Back-Feeding*), allowing for an unlimited variety of cardboard designs that are precisely tailored to the respective product dimensions. The EM7-25™ model can be seamlessly integrated into the PackNet.Server® software, which is used for production control and process optimization. This provides those responsible for the packaging process with the necessary tools and analysis data to efficiently coordinate and control both single and series production, as well as highly complex processes in the manufacture of corrugated cardboard packaging. Gedjz Ig E Rjpfx Akyjkc A configurable user interface provides easy access to local reports on machine operation and is controlled via an integrated control panel.