Used Poultry Slaughter for sale (145)

Condition: excellent (used), functionality: fully functional, Schomaker STWC-600 | Dry Breader Manufacturer: Schomaker Type / Model: STWC-600 Serial Number: 280515 Mesh belt width: 600 mm Belt material: Stainless steel Overall dimensions: 2900 × 900 × 1930 mm Lsdoy Ub S Rjpfx Afterp Equipped with an integrated, upper hopper for breading material (e.g., breadcrumbs, flour, or fine-grained spices). The STWC-600 is a fully professional, industrial dry breader designed for the automatic and continuous coating of food products with dry breading. This machine is a key component of "convenience food" production lines, working directly with formers and liquid breaders (which apply batter or dough). It is an ideal solution for the production of nuggets, cutlets, fish sticks, poultry wings, and vegetable-based and molded snacks. The 600 mm working width of the mesh belt guarantees excellent throughput, allowing for smooth synchronization of the device with efficient frying or freezing tunnels. Key features and operating principle: - Full coating system (360°): The device evenly applies breading to all sides of the product. The bottom part of the product is coated by passing over the so-called "breading bed" on the belt, while the top and side sections receive a uniform flow of medium from the integrated curtain system. - Recycling and breading saving system: The machine has a built-in internal transport system (e.g., screw conveyor or vertical conveyor) that collects excess unused breading from the lower trough and transports it back to the upper hopper, operating in a closed loop. - System for removing excess breading: The equipment is fitted with an adjustable air blower or a vibration system, which effectively removes loose, excess amounts of breadcrumbs or flour from the product before it enters the fryer, preventing oil from burning and improving the appearance of the product.

Condition: excellent (used), functionality: fully functional, Vemag HR 2x5=10 | Set of 3 industrial smoking and steaming chambers (Total capacity for 30 trolleys) Technical specifications of the set (3 chambers): Manufacturer: Vemag Anlagenbau GmbH Model / Type: HR 2x5=10 (Two-row system) Capacity of a single chamber: 10 standard smoking trolleys (2 rows of 5 trolleys each) Total capacity of the set: 30 Euro / standard trolleys Power supply / Heating medium: Steam Detailed technical data for each chamber: Chamber 1 (Year 1990): Serial number: 5202023 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 400 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Ledpfxsy Ua Rxs Afterp Chamber 2 (Year 1993): Serial number: 520.2359 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Chamber 3 (Year 1993): Serial number: 520.2389 Steam heating: 6–10 bar (max. 800 kg/h) Steam humidification: 0.1–1.2 bar (max. 270 kg/h) Compressed air: 3–8 bar (max. 2.5 Nm3/h) Dimensions (for each individual chamber): Internal dimensions: 1230 × 5250 × 2100 mm Overall external dimensions: 3300 × 5750 × 4500 mm Control cabinets included: 3 units, dimensions of each: 800 × 340 × 1000 mm The set does not include smoke generators The Vemag HR 2x5=10 is a powerful, highly advanced industrial system designed for the thermal processing of meat, sausages, poultry, and other food products. The presented set, consisting of three robust steam and smoking chambers, constitutes a complete production line capable of handling up to 30 smoking trolleys simultaneously, making it an ideal solution for large-scale industrial processing plants. The chamber design is based on a two-row system (2 rows of 5 trolleys each), which ensures optimal air and smoke circulation, and therefore a perfectly even distribution of temperature and color at each trolley level. Key advantages: - High-performance steam heating: The use of a steam system operating at a pressure of 6–10 bar allows for rapid achievement of the desired temperatures, reducing the steaming and baking time to a minimum, which directly translates into lower weight loss of the finished product. - Precise humidity control: Individual steam humidification systems (up to 400 kg/h in the older model and up to 270 kg/h in the 1993 models) guarantee full control over the climate inside the chamber, which is crucial for achieving the ideal juiciness of the products.

Condition: excellent (used), functionality: fully functional, Wolfking Y/D-REV | Industrial mincer for frozen blocks Ljdoy Uarcspfx Aftjrp Manufacturer: Wolfking Model / Type: Y/D-REV Serial number: 52753 Screen diameter: 400 mm Power supply: 380 V / 3 phases / 50 Hz Rated current: 250 A Rated power: 33 kW Overall dimensions: 2700 × 1900 × 2800 mm Includes an additional pallet with parts. The Wolfking Y/D-REV is a powerful, highly efficient industrial mincer designed specifically for the pre-processing and actual grinding of whole, hard blocks of frozen meat, fish, or poultry. Thanks to its enormous 400 mm screen diameter and a 33 kW motor operating at 250 A, the machine effortlessly crushes and grinds frozen material (even down to -20°C) without the need for prior thawing or pre-cutting. This allows for maintaining the highest microbiological quality of the product and drastically reducing the process time. Key features: - Extreme construction: Massive body and feed hopper made entirely of acid-resistant stainless steel, designed to withstand enormous mechanical loads. - High throughput: A 400 mm diameter combined with a special geometry of the feed and cutting screw ensures a gigantic hourly throughput. - Low temperature increase: A special cutting system reduces friction to a minimum, which prevents overheating of the material during grinding and allows for maintaining the ideal structure of fat and protein.

Year of construction: 2004, condition: excellent (used), functionality: fully functional, Sealpac 800 | Automatic and high-performance tray sealer Manufacturer: SEALPAC GmbH Model: SEALPAC 800 Type designation: TVG 01 1031 01 Year of manufacture: 2004 Power supply: 3x 400/230 V, 50/60 Hz Connected power: max. 10 kW Compressed air consumption: 8 bar / 650 l/min Cooling water consumption: approx. 4–5 l/min Protection class: IP 65 Machine weight: approx. 2000 kg Overall dimensions: 8500 × 900 × 2000 mm Conveyor system and tooling: - Infeed and outfeed belts: Mesh/wire belts, working width: (2x) 220 mm - Formats / Tooling dimensions included: - Four-row tool: (4x) 220 × 160 mm - Three-row tool: (3x) 288 × 220 mm Ledpsy T Su Tjfx Aftorp - Maximum tray depth: up to 200 mm Additional equipment (included): - Busch vacuum pump Type: 250-132 Serial number: 49167 Capacity: 250 m³/h Ultimate vacuum: 0.5 mbar Oil quantity: 6 liters (recommended type: SAE 30) - Accessories: Additional pallet with spare parts and format elements. The SEALPAC 800 is a fully automatic, industrial sealing line designed for continuous operation in meat, poultry, fish processing plants, and ready-meal production facilities. The machine precisely forms a vacuum and applies a protective gas mixture (MAP / Modified Atmosphere Packaging technology), which significantly extends the freshness and shelf life of packaged food products. Thanks to its impressive frame length (8.5 m), the machine provides a long and convenient loading area for personnel or automatic dispensing machines. The machine features modern microprocessor control, low noise emission (approx. 73 dB), and a full stainless steel construction with IP 65 protection, which enables aggressive chemical and pressure washing after production. The included Swiss Busch pump with a capacity of 250 m³/h guarantees quick and stable achievement of a deep vacuum in the sealing chamber.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, We offer the Henneken B7000 vacuum tumbler with a capacity of 7,000 liters – an industrial machine designed for massaging, curing, and preparing meat in large processing plants. The system is designed to support both gentle and intense product massage. The manufacturer notes that machines in this series are particularly well-suited for curing steamed hams, dry-curing smoked hams, kebab production, and massaging fish and poultry. A major advantage of the B7000 model is its adjustable rotational speed in the range of 0.5–10 rpm, which allows the intensity of the process to be adjusted to the type of raw material and the desired technological result. All parameters are set via a user-friendly SIEMENS touchscreen and can be programmed, which facilitates repeatable production and quick recipe changes. Technical specifications: Manufacturer: Henneken Series: Type B Model: B7000 Capacity: 7000 l Speed range: 0.5 – 10 rpm Power: 10.4 kW Width: 1820 mm Length: 4385 mm Height: 2240 mm Lrjdpjy Tl Tpsfx Aftep Key advantages of the Henneken B7000 very large capacity of 7,000 liters, adjustable speed of 0.5 – 10 rpm, programming of operating parameters via a SIEMENS panel, easier loading and more thorough emptying of the tank, ideal for ham, kebab, fish, and poultry.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, GEA MultiFormer 400 | Plate Former Manufacturer: GEA Food Solutions Bakel B.V. Model: MultiFormer 400 Machine No.: E022110205415 Year of manufacture: 01/2021 Machine weight: 1200 kg Power supply: 380–415 V, 3-phase, 50 Hz Power (kW): 8 kW Current consumption: 15.4 A Belt: Stainless steel mesh belt, width 400 mm Machine dimensions: 3100 × 1000 × 2700 mm Lodey Sbzmspfx Aftjrp Additional equipment included: Forming plates: 2 pallets with a set of plates for various product shapes. Service stand: Made of stainless steel, equipped with 2 additional discharge belts (width 400 mm). Dimensions: 1350 × 600 × 2100 mm. Tool trolley: Original GEA trolley for easy storage and changeover of forming parts. Dimensions: 1200 × 700 × 950 mm. The GEA MultiFormer 400 is a professional food forming machine utilizing proven plate technology. This 2021 unit features a modern design “Made in the Netherlands” that ensures maximum hygiene and production precision. The system allows for quick product changeover – from classic burgers and nuggets to custom 2D and 3D shapes. Thanks to its stainless steel mesh belt and the included discharge belt system, the machine is ready for direct integration with coating, frying, or freezing lines. The included tool trolley and complete set of forming plates make this package an extremely flexible solution for meat, poultry, and plant-based food processing plants.

Condition: used, TREIF Felix 100 CE – Professional Dicer / Universal Slicer The TREIF Felix 100 CE is a compact and high-performance cutting machine designed for professional food processing. This machine is ideal for dicing, strip cutting, and portioning meat, bacon, sausage, cheese, fish, and vegetables. Thanks to its semi-automatic feed system with frequency drive, the machine operates precisely, quickly, and reliably. The spacious cutting chamber allows for processing a wide range of products without the need for extensive pre-cutting. The robust stainless steel housing ensures high levels of hygiene and easy cleaning. Technical specifications: Model: TREIF Felix 100 CE Cutting chamber: 96 × 96 mm Cutting length: approx. 0.5 – 32 mm Output: up to 0.8 t/h or approx. 500 kg/h Voltage: 220 V / 3 phase Material: Stainless steel Applications: Meat, poultry, fish, cheese, vegetables, and more Condition: used / good condition (adjust as needed) Advantages: Precise dicing and strip cutting High production capacity Easy operation Hygienic stainless steel design Compact construction Ideal for butcheries, commercial kitchens, and food processing companies Lsdpfx Afoy R Aqyetjrp The TREIF Felix 100 CE stands out for its reliability, durable construction, and professional cutting results.

Condition: used, We offer the Nowicki MA-5-2000PS vacuum tumbler, designed for professional tenderizing, curing, and preparing meat for further processing. This is a robust industrial machine from a Polish manufacturer well-known in the meat industry, designed to handle large batches of raw material in food processing plants. The vacuum tumbler improves meat texture, enhances brine and seasoning retention, and ensures better tenderness, juiciness, and consistency of the finished product. This type of equipment is used in the production of hams, pork neck, bacon, poultry cuts, grilled products, and other items requiring a controlled massaging process. The Nowicki MA-5-2000PS model has a capacity of 2000 liters. Technical specifications: Manufacturer: Nowicki Type: MA-5-2000PS Year of manufacture: 1999 Capacity: 2000 l Lrodjy N Srqepfx Aftep Installed power: 4.4 kW Power supply: 3 x 380 V Weight: 1188 kg Dimensions: L: 3150 mm, W: 1340 mm, H: 1720 mm Made in: Poland Advantages of the Nowicki vacuum tumbler: large working capacity of 2000 liters, improved absorption of brine and spices, better tenderness and juiciness of the meat, greater consistency in the production process, robust construction for industrial use, a proven manufacturer of machines for the meat industry. The Nowicki MA-5-2000RS vacuum tumbler is a good solution for companies looking for a used, high-performance meat tenderizing machine and wanting to improve the quality and consistency of their products.

Condition: ready for operation (used), functionality: fully functional, The Marel Townsend TFM 630 Breading Machine is an industrial system dedicated to the uniform coating of food products before cooking or further processing. It is used in-line to apply an even layer of flour or breadcrumbs, particularly in the production of meat, poultry, or processed foods. This ensures a consistent preparation, essential for final product quality and batch uniformity. Thanks to its continuous conveyor system, the TFM 630 delivers precise flour distribution on each product. The standardized belt width enables smooth passage of items, which enhances coating consistency. As a result, the machine minimizes material waste while maximizing overall output. Furthermore, it helps stabilize production by reducing batch-to-batch variation. This breading machine integrates easily into a complete food processing line, typically installed between product preparation and cooking or frying. Its stainless steel construction provides a high level of hygiene and simplifies cleaning operations. Additionally, its continuous operation design allows increased throughput without compromising product quality. The Marel Townsend TFM 630 Breading Machine is a strategic solution for manufacturers seeking to automate coating processes while controlling costs. As a refurbished unit, it offers an excellent balance between performance, reliability, and cost-effectiveness. Technical specifications: Brand: Marel Townsend Model: TFM 630 Type: Industrial breading machine (coating) Belt width: 630 mm Power supply: 3 × 400 V Frequency: 50 Hz Construction: Stainless steel System: Continuous conveyor with uniform coating Lredpsy Na Dhefx Aftjp Integration: Automated line (pre-cooking or frying) Function: Flour coating / pre-breading ❓ Key points to check before investing in the TFM 630 What is the actual production capacity? This depends on your full line, but the 630 mm width supports continuous, industrial-scale throughput. Why choose an automatic breader over manual coating? An automatic system guarantees consistent coating, reduces product loss, and stabilizes production. Is this machine compatible with an existing line? Yes, it is typically integrated between product preparation and cooking (fryer or oven). What types of products can it process? Meats, poultry, reformed products, or any preparations requiring a consistent, homogeneous coating. U4C1ML8C

Condition: good (used), Year of construction: 2021, Koneteollisuus F19S Meat Slicer 2021, stainless, designed for cutting fresh and boneless meat into slices or strips, works well for slicing cooked or dried meats, liver, poultry, fish fillets as well as fruits and vegetables, up to 1500Kgs per hour, mobile, 1Ph Lsdpfsyzihgox Aftorp

Condition: excellent (used), Year of construction: 2022, Provisur AM2C Beluga SD1830 separator features cutting-edge separation technology combined with a low RPM, single screw feed system, ensuring delicate handling of raw materials. It provides a high-quality, ground product while keeping the fibers and textures intact. The final product is of high quality. Controls are mounted directly on the machine for easy access. The design has a small footprint, saving space. Machine has a versitile operation and can work with red meat, poultry, pork, fish, fruits, vegetables etc. Lsdpfx Afeth Ufwetsrp Technical features: Gentle handling – Low calcium (

Condition: used, Year of construction: 2012, functionality: fully functional, Typical Applications: - Pulled meat and poultry production - Ready meal and prepared food lines Features: - Continuous flow design for consistent output - Fiber pulling action (not cutting or tearing) for natural texture - Stainless steel construction with easy-to-clean access - Safety interlocks and easy washdown design Ledpfxsx Akcrj Aftjrp - Compact footprint for seamless integration Make: Cove Model: SH-5 Made in USA Capacity: 794 kg/hr Hopper Feeder Height (mm): 1900 Hopper Opening (mm): 450 x 380 Throat Opening (mm): 270 x 220 Throat/Chute (mm): 970 Discharge Height (mm): 700 Overall Dimensions: 1000 L x 630 W x 1900 H Weight: approx. 113 kg YouTube video: factory video, similar machine, not this exact unit!

Condition: good (used), Year of construction: 2014, Maja ESB 4434/1 GV Skinning machine The Poultry Skinning Machine MAJA ESB 4434/1 GV is suitable for the safe automatic skinning of fresh poultry parts by infeed conveyor belt. It offers the following advantages: For perfect skinning of poultry parts with excellent yield. Versatile use, for removing the skin of different parts of chicken and turkey, coming either from dry or wet chilling. Gentle skinning process, without damages to the sensitive poultry meat and the skin for increased product quality. Maximum operator safety by automatic skinning through infeed conveyor belt MAJA Skinning Machine in accordance with current CE regulations.  Manufacturer: Maja Model ESB Year: 2014 Cutting width: 385 mm Lrjdpfoy Ed Txsx Aftsp Power: 50Hz / 400V / 0,88kW Machine dimensions LxWxH: 1.800x750x1.250 mm Machine weight: 250 kg.

Condition: good (used), Koma Pigs stunning device This device is suitable for the electrical stunning of animals. From 2019, Regulation (EC) No 1099/2009 of 24 September 2009 concerning the protection of animals at the time of killing applies. According to the new regulations, every animal slaughtering plant should record the stunting parameters. This device has a factory-installed recorder of the deafening parameters, which measures the deafening parameters during slaughter and records them on an SDHC memory card placed in the recorder's socket. The device with the recorder gives the possibility of remote assistance when setting the de-stunting parameters. Lodpfey Edvtsx Aftjrp The operation  is based on the principle of automatic measurement of the body resistance of the deafened piece. In the ready-to-run state, there is only a low safe measuring voltage of approx. 15 V at the open electrodes of the forceps. When the electrodes are pressed against the animal's body, the resistance is measured and a deafening voltage of < 400 V is automatically applied, which is automatically switched off when the deafening process is completed (i.e. the electrodes are opened). Two electrodes are applied to the animal's head, while the third electrode, using a pneumatic actuator, is applied to the area of the heart, causing it to stop temporarily, as a result of which the blood stops flowing and the number of congested muscles decreases. By stopping the heart with the third electrode, it is possible to significantly reduce the incidence of adverse factors affecting the quality of the meat.

Condition: excellent (used), Year of construction: 2012, total length: 3,000 mm, total width: 1,200 mm, total height: 2,000 mm, We offer an automatic PLH (Poultry Liver Harvester) machine designed for efficient and precise liver separation. The device is an integral part of the evisceration line and enables maximum product recovery while maintaining high hygiene standards and process consistency. Capacity: 13,500 bph Lrsdpfx Afotdhtxetjp Key advantages: - high efficiency, tailored to modern poultry processing lines - increased yield of valuable product - reduced manual labor - consistent final product quality - compliance with hygiene standards (HACCP) - can be integrated with existing lines Sold as a set with the STORK Drum Separator The perforated stainless steel drum is used to separate and drain liver prior to portioning. It is equipped with an electric drive and a water system (sprinkler). STORK / LIVER / PORTIONING / SEPARATOR / POULTRY

Condition: used, Year of construction: 2021, Verbruggen Satay Skewering Machine – 2021 – As New Condition For sale: Verbruggen Satay Skewering Machine (Traditional Satay Unit), manufactured in 2021 and presented in as new condition. A high-quality machine designed for the automatic skewering of meat, fish, tofu, vegetables, or fruit onto sticks, ideal for food producers looking to increase efficiency while maintaining an artisanal product appearance. This versatile standalone unit is easy to adapt to different products thanks to its quick-change forming plates and adjustable stick lengths. Built for reliability, simple operation, and easy cleaning. Key Features: - Year of manufacture: 2021 - Condition: As new - Suitable for meat, poultry, fish, tofu, vegetables, fruit - Fast changeover between products - Adjustable for various stick lengths Lsdpfxey Dplqe Aftsrp - Consistent, high-quality production output - Hygienic and easy to clean - Robust Dutch build quality Ideal for butchers, satay producers, ready-meal manufacturers, and food processing companies. More specifications and information can be found here: [Verbruggen Traditional Satay Unit Specs](?utm_source=)

Condition: excellent (used), Year of construction: 2017, total length: 1,800 mm, total width: 750 mm, total height: 1,250 mm, overall weight: 250 kg, input voltage: 400 V, track width: 385 mm, input frequency: 50 Hz, MAJA ESB 4434/1 Skinning Machine – Professional Meat Processing Equipment Lrjdpfxey A Ndws Aftjp High-quality industrial skinning machine from MAJA (Marel), model ESB 4434/1, designed for efficient and precise removal of skin from meat. Ideal for: - meat processing plants - butcher shops - cutting and deboning facilities - kebab / gyros production DESCRIPTION & FUNCTIONALITY The MAJA ESB 4434/1 is a dual-purpose machine: - Automatic mode (conveyor) – for flat cuts - Manual mode (open) – for round products Thanks to its conveyor system and precision blade: - ensures high skinning accuracy - minimizes meat loss - delivers excellent yield Additional features: - stepless thickness adjustment - quick mode switching (no tools required) - easy disassembly for cleaning - pressure roller adapts to product shape - suitable for slicing thin layers of meat and fat SKINNER / LEG SKINNER / MAJA / MAREL / BUTCHER / POULTRY

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 26944.00, total length: 2,000 mm, total width: 500 mm, total height: 1,150 mm, conveyor belt width: 300 mm, Carnitech PM 45 Belt Conveyor – A Reliable Solution for the Food Industry We offer the high-quality Carnitech PM 45 belt conveyor, designed for efficient and safe product transport in demanding production environments. The device features a robust stainless steel construction and precise workmanship, ensuring long service life and easy maintenance in compliance with food-grade industry standards. Technical Specifications: Type: PM 45 Construction: Stainless steel Belt width: approx. 300 mm Length: approx. 2000 mm Height: approx. 1150 mm (adjustable height) Belt: Food-grade plastic Advantages: - High conveying efficiency – smooth product flow - Hygienic design – ideal for the food industry - Durability and resistance – stainless steel ensures long service life Lrjdoy Akp Uopfx Aftsp - Modularity – easy integration into existing production lines - Easy cleaning and service – open design facilitates maintenance Applications: - Fish and meat processing - Food and beverage processing plants - Filleting, sorting, and packaging lines - Transport of raw materials and finished products CONVEYOR / BELT CONVEYOR / TRANSPORT SYSTEM / POULTRY / FISH / FOOD

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, total length: 1,500 mm, total width: 1,300 mm, total height: 2,000 mm, overall weight: 500 kg, Meyn D40 Chicken Thigh Deboning Machine We offer a professional industrial chicken thigh deboning machine from the renowned company Meyn – one of the leading manufacturers of technology for the poultry industry. Lsdpfxjyiubys Aftjrp This device is designed for use in poultry processing plants, ensuring high efficiency, process repeatability, and reduced raw material loss. The stainless steel construction allows easy maintenance and meets food industry standards. Technical specifications: Manufacturer: Meyn Model: D40 Year of manufacture: 2008 Capacity: 2400 pcs/h Weight: 500 kg MEYN / BONE / CHICKEN / POULTRY / THIGH / DEBONER

Condition: new, Year of construction: 2026, operating hours: 24 h, functionality: fully functional, machine/vehicle number: AVB-HELIX100ST4, total length: 6,500 mm, total width: 2,600 mm, total height: 3,500 mm, height adjustment type: mechanical, overall weight: 16,000 kg, compressed air connection: 8 bar, shaft diameter: 260 mm, warranty duration: 12 months, input voltage: 380 V, input frequency: 50 Hz, infeed height: 800 mm, control cabinet width: 600 mm, control cabinet length: 2,200 mm, control cabinet height: 2,000 mm, working length: 3,000 mm, workpiece width (max.): 800 mm, empty load weight: 16,000 kg, workpiece length (max.): 3,000 mm, rotational speed (max.): 2,800 rpm, rotational speed (min.): 3,000 rpm, FEATURES OF THE WOOD SHAVING MACHINES  Bin size: 3000 mm  Hopper is equipped with the Speed Control System  The robust machine frame structure of single-piece steel construction  Heavy body structure against vibration caused by long-term use of the machine  Conveyor extraction: 1000 mm wide outfeed provided with a rubber band or PVC 4 mm thickness  Direct motor operation with an independent control panel with a digital screen,  PLC-controlled electric panel independent from the machine, minimum 5-6 meters away from the machine,  Can be operated with 380V 50-60 Hz (additional transformers can be added for foreign countries operating at different voltages, optional)  Adjustable knife heights and cutter heads  Possibility to adjust shavings thickness between 0,4 and 1,2 mm(for straight blade models)  Blades and speed can be varied to produce Large Flakes (Equestrian), Small Flakes (Poultry Layers), Fine flakes (Poultry Broilers)  To avoid downtime, a few sets of spare blades should be ordered together with each machine.  Shavings outlet: Gravity discharge from the cutter heads to the belt conveyor  easy cutter head blade adjustment system;  All cutter head blocks are moved out on the machine during the blade changing.  We are also supported by our customers with blade purchasing,  All parts used in our machines are CE certified and selected with the high-efficiency principle  Knives T.C.T. Carbide 14*14*2,0 mm CERATIZIT Made in EU, bearings COC, motors use the highest quality Turkish or imported products (WEG, SIEMENS, optional).  Automatic lubrication system for the whole machine's essential parts  All machines will be CE standards  The hydraulic system will work with the proportional valve.  Double-armed hydraulic system for the extra power of heavy-duty work  Control panel designed with Mitsubishi Electric, AB (Allen Bradley), Siemens, Schneider, or ABB  Modem Ethernet connection for the main company  The wood shaving machine output will be on the right side or the left side  digital display screen for control in one touch  All blades Diamond 14*14 mm or 15*15 mm, 500 pcs long-life blades  Directly mounted to the cutter head for all-electric motors to prevent losing power  Specially produced spiral helix mobile roller system with a T.C.T. carbide knife (first and only in Turkey)  Separate the control panel and the user interface panel TECHNICAL SPECIFICATIONS Number of Cutterheads 4 Length of Cutter Head 100 cm Number of Blades 500 Carbide/cutter head Power Supply 4 *37 KW = 148 KW (198,5 HP) Hopper Working Stationery Hopper Dimensions mm 3100*1200*1000 Working Voltage 380 V-400V-460V-560V 50-60 Hz Conveyor Band Motor 0,75 KW Hydraulic Motor 22-30 KW Total Power 181 KW Cutterhead Speed 2800 rpm Cutterhead Diameter 230 mm Shaving Depth 0,03 mm - 0,05 mm Max.Log Input Length 150-300 cm Max.Log Input Width 10-90 cm Working Distance 2200 mm Machine Dimensions L6450 x H3014 x W2514 mm Lrsdpfxogmbtqe Aftsp Weight 17.000 Kg Production capacity: 4.500-5.000 kg/h

Year of construction: 2019, condition: used, functionality: fully functional, This listing is for an SCC 101 combi-steamer in electric version (left-hinged door) from the premium manufacturer Rational, year of manufacture 2019. The cooking chamber floor has dents, which do not affect functionality in any way, and this has been taken into account in the price. The combi-steamer is a device from the latest SCC series with triple glazing and LED lighting. The unit has been inspected in our in-house workshop and is fully functional. The stand shown in the picture is not included in the offer but can be purchased as an option. You will receive an invoice with VAT shown separately. The original list price (RRP) is €12,920 net. Service: We are happy to assist you in finding a certified Rational customer service technician. Are you looking for a specific Rational appliance type? Contact us—we have access to an extensive range of used and new equipment. We are happy to advise you on all types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our used equipment service for you: • 6-month warranty on all electrical parts, limited to replacement of defective parts, without removal and installation costs • High-quality branded appliances at fair prices • Professional reconditioning/inspection & expert cleaning • Tested & fully functional – or your money back • Flexible shipping or self-collection options • Competent advice before and after purchase • Provision of operating manuals, wiring diagrams & spare parts • Safety inspection according to DGUV V3 This combi-steamer offers capacity for 10 x 1/1 GN containers. In automatic mode, the unit independently detects the ideal cooking path, product size, load quantity, and product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical details: • W x D x H: 847 x 776 x 1042 mm Lrsdpfx Afoyubn Djtjp • Power connection: V: 400 / kW: 18.6 / Hz: 50/60 • Capacity: 10 x 1/1GN • Weight: approx. 135 kg • Serial number: E11SI19022729883 • Year of manufacture: 2019 Condition: used, inspected, fully functional Additional features: • 3 operating modes in combi-steamer mode: Steam (30°C to 130°C), Hot Air (30°C to 300°C), and Combination (30°C to 300°C) • Care Control – Self-cleaning • Core temperature probe • Hand shower with automatic retraction • 8.5-inch color display and touchscreen • 5 programmable fan speeds • Integrated, maintenance-free grease separation system • Automatic start time pre-selection • 7 cleaning stages for unattended cleaning – including overnight • Steam injection adjustable in 3 stages – from 30°C to 260°C • 5 programmable proofing stages • USB interface • Seamless, basin-shaped hygienic cooking chamber with rounded corners • Halogen cooking chamber lighting Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Delivery to islands or mountain stations only by prior arrangement Subject to change and errors excepted. Do you have questions, need advice, or would like to view something onsite? You can reach us by phone during our opening hours: Monday–Friday 09:00–13:00 and 14:00–17:00. Sales are made exclusively according to our General Terms and Conditions (GTC).

Condition: excellent (used), Year of construction: 2018, Stork / Marel AMF Filleting Line AMF-i Professional Chicken Breast Filleting Line – High Efficiency and Precision Ljdpfox Hymdox Aftjrp We offer a complete Marel / Stork AMF-i filleting line, tailored for modern poultry processing plants. This system provides automatic and precise filleting of chicken breasts while ensuring maximum throughput and superior end-product quality. Key Benefits: Intelligent Filleting (Adaptive Filleting) The system automatically adjusts its settings to the size of the raw material, guaranteeing high-quality results and optimal yield regardless of product dimensions. High Production Efficiency Processes up to approximately 60 fillets per minute – an ideal solution for large-scale operations. Consistent Quality and Maximum Yield Losses are minimized, and efficient recovery of by-products (tendons, skin, meat) is ensured. Modular Design The line can be configured and expanded to meet individual production requirements. Process Automation Manual labor is significantly reduced, increasing consistency and process repeatability. Included Components: - Loader module - Filleting line with integrated measuring system (encoder) - Skinning module - Splitting module with automatic adjustment - Separation module - Tendon collection system - Original control cabinet Technical Specifications: Model: AMF-i Manufacturer: Stork / Marel Year of Manufacture: 2018 Capacity: up to 3,600 fillets/hour Condition: Very good / ready for operation Type: Chicken breast filleting line STORK / MAREL / AMF / FILLETING LINE / CHICKEN BREAST

Condition: used, Year of construction: 2012, We offer the HENNEKEN B6000 vacuum tumbler, designed for professional tenderizing, curing, and marinating meat in large processing plants. The Type B series was designed to offer an excellent price-to-performance ratio and wide applicability in meat production. The B6000 model operates with a capacity of 6,000 liters and a speed range of 0.5 – 10 rpm, allowing the intensity of the process to be adjusted to the type of raw material and the desired technological outcome. The Type B mixer is equipped with a direct drive, and all operating parameters can be conveniently set and programmed via the SIEMENS touchscreen panel. A major advantage of this machine is the design of the tank interior. Diagonal fins set the product in controlled rotational, sliding, and shifting motion, creating a 3D tumbling effect. This solution increases the effectiveness of protein activation, improves process uniformity, and supports the production of a high-quality finished product. Additionally, the diagonal fins facilitate quick loading and thorough emptying of the drum. The HENNEKEN Type B massager is particularly recommended for curing parboiled hams, dry curing smoked hams, kebab production, and massaging fish and poultry. The manufacturer notes that the exceptionally robust and user-friendly design allows for both gentle and intensive product massage. Technical specifications: Manufacturer: HENNEKEN Type: B6000 Lredpsyyay Defx Aftop Capacity: 6000 l Year: 2012 Speed range: 0.5 – 10 rpm Power: 11 kW Power supply: 3×400 V / 50 Hz Current: 28 A Control: 24 V DC Dimensions: length 3885 mm / width 1820 mm / height 2240 mm Year of manufacture of the machine offered: 2012 Key advantages of the HENNEKEN B6000 tumbler: very large working capacity of 6000 liters, 3D tumbling thanks to diagonal blades, adjustable speed from 0.5 to 10 rpm, direct drive, parameter programming via the SIEMENS panel, easier loading and more complete emptying of the drum, ideal for hams, kebabs, fish, and poultry.

Condition: good (used), The Ruhle IR56 injector, equipped with a set of 56 needles and a corresponding number of incision blades, is designed for processing various types of meat – both with and without bones, including poultry, meat and fish. Thanks to the use of advanced microprocessor control technology, it is possible to precisely regulate all process parameters, resulting in uniformity and high quality of final products. The injector allows precise dosing of brine to each needle, which increases the efficiency and accuracy of the process. Features: – individual supply of brine to each needle separately, allowing for greater precision and efficiency of injection – productivity of the machine up to 5,000kg/hour – tenderizer – an additional bar with a system of incision knives – independent cut-off of brine supply to individual needles preventing formation of so called brine deposits when a needle hits a bone – integrated brine preparation station, the design of which excludes contact of used brine with fresh brine – 350mm wide feeding belt – 200mm product clearance The construction of the device together with the high-performance brine pump are made entirely of stainless steel Power 7.5 kW Power supply 400 V 50 Hz / 3N Ljdpfx Asrwmndjftorp L: x 1600 x W: 750 x H: 2020mm Weight 750 kg

Condition: excellent (used), Year of construction: 2016, The NovaMax660 is the next generation of advanced slide-plate forming technology. This state-of-the-art servo driven system is suitable for forming a broad range of meat, poultry and non-meat products. It is commonly used by high volume processors forming popular products such as burger patties, pork sausage, chicken filets and chicken nuggets. The high throughput and reduced cost of ownership will assure a rapid return on your NovaMax660 investment. Forming Style: Slide plate Typical Throughput*: 9,000 lbs/hour | 4,082 kgs/hour Ljdpfx Aovl Evvjftorp Line Width: 660 mm Speed: Standard speeds of 25-100 strokes/min (SX up to 120 strokes/min) Feed hopper Capacity: 1,100 lbs | 500 kg