Used Pottinger Terradisc 3000 for sale (4,701)

Condition: used, Year of construction: 2014, functionality: fully functional, For sale are two identical dissolved air flotation (DAF) units for industrial wastewater treatment from the manufacturer EnviroChemie. The plant is fully installed and turnkey fitted into shipping containers. Due to its containerized design, the system is compact, mobile, and can be quickly recommissioned. It was used for industrial wastewater treatment and solids separation via dissolved air flotation, and is in used but fully operational condition. Kwedpfx Ahoyudwuevjw Typical areas of application include: - Industrial wastewater treatment - Food industry - Surface treatment / metalworking - Chemical industry - Process water treatment Technical Data Manufacturer: EnviroChemie Plant type: Dissolved air flotation unit (DAF) Model: Lugan 3000 Year of manufacture: 2014 Condition: used, fully functional Capacity: approx. 1.5 – 3 m³/h maximum throughput Equipment - Flow measurement / valves: Endress+Hauser Promag 50 - Compressed air unit: Festo - Control cabinet with Siemens SIMATIC S7-300 controller - Operating device with display / touchscreen - 300-liter flocculant dosing tank - Agitator and dosing pump - Complete container installation (shipping container) --flotation unit, DAF unit, dissolved air flotation, wastewater treatment unit, containerized plant, water treatment, industrial wastewater--

Year of construction: 1994, condition: ready for operation (used), A small compressor system including separator and dryer is available. 1) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 2) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 3) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible. Kwjdox Ih D Topfx Ahvsw

Condition: used, mileage: 3,000 km, power: 100 kW (135.96 HP), first registration: 02/2019, fuel type: gasoline, maximum load weight: 1,000 kg, overall weight: 3,500 kg, tire size: 195/70r16, axle configuration: 4x2, wheelbase: 3,750 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, loading space length: 4,290 mm, loading space width: 2,060 mm, loading space height: 2,060 mm, Year of construction: 2019, Equipment: ABS, air conditioning, car registration, cooling unit, spoiler, traction control, IVECO 35C14N - CHASSIS ZCFCF35AX05272808 - LICENSE PLATE FV437LR YearEURO 6 Mechanics: engine F1CFA401A - km 124,000 Mechanical transmission 6 speed + rm Bodywork: exterior cab color white IC194 Tires: dim. 195\75r16 STRUCTURE: Wheelbase 4750 mm - Short cab - Mechanical front and rear suspension. Total weight on the ground: 35 - Payload capacity: 10.00 TECHNICAL EQUIPMENT TRUCK: 6-speed manual transmission - 2835.6 , Air conditioning, Cruise Control, Particulate Filter, Abs - Esp 9 System, Iveconnect, Electric Window Lift, Closing Centralized, Electric And Heated Rearview Mirrors. EQUIPMENT: ISOTHERMAL VAN - Useful interior dimensions approx. 4.29 * 2.10 * H 2.06 FRIDGE GROUP - Brand ZANOTTI - Model Z200S-F - Serial No. 1830055C ATP 0° - FNA - exp. 6 YEARS REV. MCTC EXP. 02/2025 Documents: Nationalized - Certificate of Approval For viewing and road test contact Valerio Roscini at 339/3170008 Kwedpfxoqgct Te Ahvjw

Condition: good (used), Year of construction: 2013, fuel type: diesel, color: black, power: 11 kW (14.96 HP), Year of manufacture: Jun 2013 Model year: 2013 Field of application: Construction Empty weight: 857 kg Technical condition: good Visual appearance: good Damages: none Kwodpswp R A Iofx Ahvew Please contact Arie or Pedro for more information 3x Thermo-King 2013 Clip-on SG 3000: - ID 10757 - 14.130 hours - ID 10763 - 13.047 hours - ID 10767 - 13.103 hours All units have been serviced at this hours. Check our website for actual availability:

Condition: used, functionality: fully functional, mileage: 169,000 km, power: 100 kW (135.96 HP), first registration: 11/2020, fuel type: diesel, maximum load weight: 800 kg, overall weight: 3,500 kg, tire size: 195/70r16, tire condition: 55 %, axle configuration: 4x2, wheelbase: 3,750 mm, axle spacing: 3,450 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: parabolic leaf (spring), number of seats: 3, loading space length: 3,710 mm, loading space width: 2,050 mm, loading space height: 2,050 mm, Year of construction: 2020, Equipment: ABS, USB port, air conditioning, airbag, car registration, cooling unit, non-smoking vehicle, sliding door, soot filter, spoiler, traction control, truck registration, IVECO DAILY 35C18 3,000cc – Chassis ZCFC635D505370283 – License Plate GD008FY Year: 30/11/2020 – EURO 6 Mileage: 162,975 km Tyres: Size 195/75 R16C – 50% tread remaining STRUCTURE: Wheelbase: 3,450 mm – Gross Vehicle Weight 3,500 kg – Payload 800 kg OPTIONS: Manual air conditioning, spare wheel & mount, airbag, leaf springs, desk, steering wheel radio controls, central locking, USB port, power windows & locking, remote control integrated in key, double key, height-adjustable driver seat with armrest. BODYWORK: Refrigerated van: PLASTOBLOK Internal cargo dimensions: 3.71 m x 2.05 m x height 2.05 m Partition and right side door Kedpeyub D Eofx Ahveww Refrigeration unit: ZANOTTI Z350S-D – Serial no. 2028206G – 2020 ATP FRCX – Expires 10/2026 MCTC Inspection – Expires 02/2027

Condition: new, Year of construction: 2026, Y axis drilling: 920 mm Y axis sawing: 860 mm X axis: 3000 mm Z axis: 12 mm - 40 mm A axis: 360 ° min. Dimensions plate: (X) 300 mm x (Y) 120 mm x (Z) 12 mm Feed speed: 20 m/min Drill: 5 mm / 20 mm / 35 mm Milling tool: 8 mm Grooving saw: 90 mm x 3.5 mm Maximum groove depth with saw blade: 10 mm Kwsdpfx Ahol D Rw Ejvjw min. Hole diameter: 3 mm max. hole diameter: 35 mm motor power: 1,3 kW weight: 500 kg

Condition: excellent (used), functionality: fully functional, Rondo comas HD 3000 pastry sheeter Kodpot Twp Hofx Ahvsww

Condition: like new (used), Year of construction: 2009, operating hours: 20,929 h, functionality: fully functional, machine/vehicle number: 23500, travel distance X-axis: 3,320 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 760 mm, feed rate X-axis: 24 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller model: Heidenhain, table width: 3,400 mm, table length: 700 mm, spindle speed (min.): 10,000 rpm, spindle speed (max.): 24,000 rpm, operating hours of spindle: 20,929 h, input voltage: 230 V, We are selling the machine because we need to free up space in the factory. CNC Machining Centre TVMC-3000 (L) Table: up to 3400 × 700 mm (maximum load 4,000 kg). Travel X/Y/Z: up to 3320 × 710 × 610 mm. Spindle: BT40 taper, speed up to 14,000 RPM. Kodjyt Np Topfx Ahveww Automatic tool changer: 24 positions. Rapid traverse: up to 30 m/min. Precision: positioning ±0.005 mm / 300 mm. CNC control available: Heidenhain.

Condition: excellent (used), functionality: fully functional, control type: NC control, actuation type: hydraulic, controller manufacturer: ESA, working width: 3,050 mm, sheet thickness (max.): 4 mm, back gauge adjustment: motor-driven, type of input current: three-phase, Equipment: emergency stop, finger protection, foot remote control, type plate available, OLEOTECNICA hydraulic guillotine shear Working cutting length: 3050 mm Maximum cutting thickness: 4 mm Kwodpfxoyqwhfj Ahvow ESA programmer for dimension display Motorized backgauge Safety guards.

Condition: good (used), turning diameter over cross slide: 870 mm, spindle bore: 162 mm, turning length: 3,000 mm, turning diameter: 870 mm, center width: 3,000 mm, Distance between centres: 3000 mm Swing: 870 mm over bed, 560 mm over cross slide Weight between centers: 3.600 kg without steady 4.400 kg with 1 steady 5.600 kg with 2 steadies Spindle speeds: 0 - 900 Rpm Spindle bore: 162 mm CNC Controller: Fagor Featured with: Kwjdpfx Ahjw Sm U Devjw - Additional chuck at back end of main spindle (oilcountry) - 1 fixed steady Ø420 mm - 1 moving steady - 4-jaw chuck Ø800 mm - 3-jaw chuck Ø 400 mm - 10 Toolholders - Coolingpump/chiptray at back end - Machine documentation Country of origin: Spain Motor power: 30 kW Machine weight: 9.000 kg Machine LxWxH: 5,1 x 2,4 x 2,0 mtr.

Condition: used, Year of construction: 2005, Processing size: 3000 x 1600 x 180 mm High-pressure pump 60 HP / 45 kW Model E-60 Operating pressure 4,130 BAR Water consumption 4.69 liters/min. Software: Watercad-CAM Automatic cutting optimization Storage location: customer Kodpfx Ahoxgfbqjvsww

Condition: ready for operation (used), travel distance X-axis: 9,000 mm, Type: 6055-AF16SMM Frezen, boren en draaien! Longitudinale X-beweging van de kolom: 9000 mm Kruis Y-beweging of kolom: 650 mm Verticale Z-verplaatsing of freeskop: 3000 mm Horizontale W-verplaatsing of freeskop: 1200 mm Machine kan met 6 assen tegelijk werken 2 hydrostatische tafels CNC gestuurd - Gewicht op de tafel: 30 ton - Continue 360° - Dwarsverplaatsing van de tafel: 2500 mm Gereedschapswisselaar met 60 posities Freeskopondersteuning / ondersteuning van de versteviging van de broche Ondersteuning van boorspindels / ondersteuningsportefeuilleverhogingen Ksdpfxev Sfm Uo Ahveww Cross traverse Y-axis (table/column): 650 mm (column) Vertical traverse Z-axis: 3000 mm Spindle traverse W-axis: 1200 mm Milling spindle taper (ISO): ISO 50 Dia spindle -- Spindle bore: 160 mm Digital read-out (1) CNC(2): Heidenhain TNC 530 Rotary table dimensions: 2 tables 2380 x 2380 mm Max weight on table: 2 tables x 30 ton

Condition: ready for operation (used), controller manufacturer: Heidenhain, empty load weight: 18,500 kg, total length: 6,450 mm, total width: 3,700 mm, total height: 3,200 mm, CNC indexerende freeskop spaantransportband heel veel gereedschap Longitudinal travel X-axe: 3000 mm Kodpfx Aheymg Sxjveww Cross travel Y-axe: 1000 mm Travel Z-axe: 1600 mm Dimensions clamping space- table: 3360 x 1000 mm Power on spindle: 18 kW Type of millinghead: ISO 50 Max speedrange: 15 > 2000 rpm

Condition: ready for operation (used), BELANGRIJKSTE KENMERKEN: Tafelafmetingen: 3000 x 3500 mm Omgeschreven cirkel: 4300 mm Toelaatbare belasting (gelijkmatig verdeeld): 50 ton op 3000 x 3500 mm Totale tafelhoogte zonder cilinder: 1.250 m Aantal T-gleuven, breedte 36 H7: 13 T-sleufafstand: 250 mm Lengteverplaatsing: 2700 mm Longitudinale voedingen / bed: • positionering: 2 mm/min • werkend: 1 tot 3000 mm/min • snel: 3000 mm/min Kwedpsxpggyefx Ahvjw Circulaire feeds: • werkend: 0,0006 tot 0,6 tpm • snel (50-tons belasting): 0,6 tpm Nominaal koppel van longitudinale motor/bed: 9,4 mkg Nominaal koppel van cirkelmotor/tafel: 22 mkg Totaal geïnstalleerd vermogen: 50 kVA Tafelgewicht (zonder elektrische apparatuur): 31.000 kg

Condition: used, Oil Mist Extractor, Centrifugal Oil Mist Extractor, Used Machine Manufacturer: Innovations-Center Type: Eonag 3000 Year: 2010 Overall dimensions: 1000 x 570 x 1750 mm Electrical data: 400 V; 50 Hz; 2.2 kW * 4000 m³/h * 84 dBA * 2800 L/min Kwodpoyn Rkusfx Ahvjw

Condition: new, Year of construction: 2025, functionality: fully functional, The AT-3000 is an advanced automatic pallet nailer designed for maximum efficiency and intuitive operation. It offers the flexibility to produce different types of pallets on a single machine by simply changing the template. Ksdpfx Aowq Izwshvjww

Condition: new, Year of construction: 2024, Handheld laser welder LWH-3000-N Relfar FWH20-S10A The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 3000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including the laser head holder) 630x1300x1500 mm Price included One-day training along with machine installatio - 1 day up to 8 hours – machine installation and operational training. Relfar FWH20-S10A laser head - Welding, cutting and cleaning Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual plasma cutter. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm Kwodoup Uzxspfx Ahvjw - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Manual laser welder 3000 W There are two features that characterize Otinus laser welders - perfectly repeatable welds and ease of use. The kit includes: laser welder with a built-in cooling system welding gun features with a focal length adjustment and a set of accessories MAX Photonics fiber laser source automatic wire feeder lead and hose kit nozzle and lens starter kit Kedpfx Aerumymohvoww Specifications laser power output 1500 W laser wavelength 1064 nm welding speed: up to 120 mm/s feed voltage 230 V 50 Hz dimensions (including the laser head rack) 630x1300x1500 mm Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Fiber optics connecting the welding gun with the laser source allows the operator to work freely at multiple workstations. Small heat affected zone prevents from severe distortions. The weld is applied in a short time achieving proper and strong joint between materials. Intended use The laser welder is designed for professional use in workshops and plants where high welding quality and aesthetics are required. Laser source output power: 1000 W Carbon steel: up to 3 mm Stainless steel: up to 3 mm Aluminum: 2 mm Brass: 0,8 – 1 mm Laser source output power: 1500 W Carbon steel: up to 4 mm Stainless steel: up to 4 mm Aluminum: 3 mm Brass: 1 mm Laser source output power: 2000 W Carbon steel: up to 5 mm Stainless steel: up to 5 mm Aluminum: 4 mm Brass: 2 mm Laser source output power: 3000 W Carbon steel: up to 8 mm Stainless steel: up to 8 mm Aluminum: 7 mm Principle of operation The laser welder melts down the welding wire together with material edges by means of a laser beam. After switching on and setting up the unit, the welding gun is positioned at the beginning of the future weld line. Then, by pressing the trigger of the welding gun, the beam is generated at the fiber laser source located inside the housing. The beam propagates along the optical fiber to the laser head. The beam is focused and emitted toward the welding wire, which is fed by a wire feeder and toward a location where the gun has been placed. After the trigger is pulled, the head should be pulled along the weld line according to the wire feed rate. The cooling system maintains a constant temperature for the gun and the laser source by means of a water recirculation system. Radiation level and cooling are managed using a controller that adjusts the parameter values according to the user’s parameter settings.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Manual laser cleaner 3000W LCH-3000-N Laser cleaner is an innovative device for efficient and precision cleaning of surfaces. It operates by focusing the laser beam on contaminants, causing them to evaporate or break down. Laser cleaners are used in various industries from automotive to preservation of monuments. It is characterized by high efficiency, minimal waste and reduced penetration of the cleaned surface. Compared to traditional cleaning methods, the laser cleaner can be more precise and cost effective. Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. Available to choose from MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Kwedor Eqbyepfx Ahvsw Raycus Wuhan Raycus Fiber Laser was founded in 2007. The company has opted for independent research and development based on mergers with other companies, and is involved in the manufacture of laser sources for a wide range of applications including cutting, welding, soldering, marking and engraving. The brand’s equipment is used in automotive, aerospace, medical, electrical and advertising industries.

Year of construction: 1999, condition: ready for operation (used), functionality: limited functionality, machine/vehicle number: N SERIE: 99 1220, Hot air Polypropylene box seam welder. Manually fed polypropylene welding machine. Kwedsw Elrpspfx Ahvjw

Condition: used, Year of construction: 2002, Kern 3000 envelope inserting machine. The device is in working condition, used only occasionally at a backup facility, so it requires cleaning and maintenance. Kjdpfx Aev D Eg Sohveww

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 990101, turning length: 3,000 mm, turning diameter: 1,200 mm, Heavy-duty lathe Seiger SLZ 1200 x 3000 with Siemens cycle control Heavy-duty lathe, Manufacturer: Seiger, Model: SLZ 1200 x 3000. This machine is equipped with a Siemens Sinumerik cycle control (Teach-In system). Features include an AC main drive, faceplate, 2x chip conveyors, hydraulic unit, and a separate electrical cabinet. Documentation and toolholders are available. Machine is supplied without tailstock. Inspection and test run under power can be arranged by appointment. Working Area Distance between centers: 3000 mm Swing diameter over bed: 1200 mm Swing diameter over cross slide: 850 mm Cross slide travel: 620 mm Bed width: 750 mm Spindle Spindle nose: DIN 55027 size 11 Spindle bearing diameter (front): 190 mm Spindle bore: 104 mm Speed range: 5 – 900 rpm Max. torque: 6000 Nm Main Drive Drive power: 37 / 52 kW (100% / 60% duty cycle) Feed X-axis feed force: 24,000 N Z-axis feed force: 16,000 N Rapid traverse X: 7 m/min Rapid traverse Z: 4 m/min Tool Mounting Tool shank cross-section: 40 × 40 mm Electrical Data Supply voltage: 400 V Frequency: 50 Hz Max. power consumption: 200 A Workpiece Weights Between centers without steady rest: 5,000 kg Kwedpfx Aheytc Hxjvew Between centers with 1 steady rest: 6,000 kg Between centers with 2 steady rests: 7,000 kg Mounted only in faceplate: 1,800 kg Dimensions / Weight Machine: approx. 6400 × 2200 × 2300 mm Bed base: approx. 7700 × 1300 × 2500 mm Additional hydraulics: approx. 800 × 500 × 900 mm Machine weight: approx. 14,000 kg Bed base: approx. 3,500 kg Electrical cabinet: approx. 1,000 kg

Condition: used, load capacity: 3,000 kg, load center: 600 mm, Combilift Four-way Electric Forklift Model: C 3000 CBE Year of manufacture: 2018 Load capacity: 3000 kg at 600 mm load center Lift height: 4,900 mm Overall height: 2,243 mm Free lift: 1,318 mm Overall width: 1,500 mm Kwjdpfx Ahoynwrfovjw Weight: 7,200 kg Overall length without forks: 1,550 mm Telescopic forks extendable up to 1,150 mm Equipped with sideshift and fork positioner Battery: 48V 6HPZS 930AH With charger This offer is intended exclusively for business customers as defined by §14 BGB.

Condition: good (used), Year of construction: 1999, functionality: fully functional, turning length: 3,000 mm, turning diameter: 1,000 mm, spindle bore: 197 mm, Centre distance: 6000 mm Kwjdpfxjyr N N Ro Ahvsw Turning diameter: over cross slide: 1000 mm over bed: 1250 mm Spindle bore: 197 mm Spindle speeds: 0 – 665 rpm Face plate diameter: 1200 mm Workpiece weight: 15,000 kg between centres Motor power: 55 kW / 74 hp 3 gear ranges: 1.5-55 / 50-180 / 180-665 rpm Equipment: Sauter 4-position turret head (rotation faulty) Tailstock (hydraulics partially defective, loss of pressure) Chip conveyor 2 chip guard doors (incl. safety device) 4-bedways machine (flat bed) LED lighting

Condition: new, Year of construction: 2026, turning diameter over cross slide: 280 mm, spindle bore: 105 mm, turning diameter: 840 mm, total length: 1,520 mm, total width: 4,500 mm, total height: 1,650 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 36 rpm, type of input current: three-phase, overall weight: 4,050 kg, The Bernardo Goliath 800 x 3000 professional metal lathe is a powerful industrial tool engineered for precise machining of large-scale components in both single-unit and series production. Equipped with a 3-axis digital readout and rapid longitudinal and cross feeds, this machine significantly reduces downtime while ensuring maximum working accuracy. Its impressive distance between centres of 3000 mm and large spindle bore (105 mm) enable it to handle even the most demanding mechanical engineering tasks with ease. The robust, induction-hardened bed made of cast iron guarantees exceptional stability and minimised vibrations, even during heavy-duty operation. This is the ideal solution for workshops seeking reliability, versatility, and high-performance cutting in the heavy-duty class. Key Features: - Solid bed constructed from precision-ground and induction-hardened cast iron for outstanding accuracy - State-of-the-art main spindle assembly with high-quality angular contact ball bearings - Centrally positioned, user-friendly feed and threading control elements - Standard with rapid longitudinal and cross feed to reduce downtime - Large, additionally hardened and polished gears ensure quiet and smooth operation - Removable gap bridge allows machining of larger workpieces - Tailstock can be offset for taper turning, handwheel features adjustable scale (0.02 mm) - Electromechanical foot brake minimises downtime - High performance even in face turning operations - 3-axis digital display and MULTIFIX size D toolpost system included in delivery - Capable of cutting trapezoidal and module threads! Kwedpfx Asyr Naijhvsw Technical Specifications: Distance between centres: 3000 mm Centre height: 420 mm Swing over bed: 840 mm Swing with gap bridge removed: 1060 mm Swing over cross slide: 280 mm Bed width: 400 mm Spindle bore: 105 mm Spindle mount: DIN 55029, D1-8 Spindle speed range: 36–1600 rpm Number of spindle speeds: 16 Longitudinal feed range: 0.063 – 2.52 mm/rev Cross feed range: 0.027 – 1.07 mm/rev Metric threads: (18) 0.5 – 7 mm Inch threads: (26) 2–28 TPI Quill diameter: 75 mm Quill stroke: 150 mm Tailstock taper: MK 5 Motor power: 9.0 kW Voltage: 400 V Dimensions (W x D x H): 4500 x 1520 x 1650 mm Weight approx.: 4050 kg Scope of Delivery: - 3-jaw chuck PS3-315mm /D8 - 630 mm face plate - 260 mm fixed steady rest - 110 mm travelling steady rest - Reducing sleeve - Centres (1x fixed / 1x revolving) - Electromagnetic spindle brake - Foot-operated safety brake - Coolant system - LED work light - Change gears set - Service tools - 40-position tool post & toolholder set with 4 inserts (Multifix) - 3-axis digital display - Legally required safety guards - Complete DTR technical documentation in Polish - CE certificate - 24-month warranty for all customers at no extra cost