Used Portal Milling Machine for sale (84,958)

Condition: new, Year of construction: 2025, functionality: fully functional, Table size 800 x 240 mm Table area 730 x 210 mm “T” slot size on table 14 (M12) Speed ​​range 75 – 3200 rpm Drilling capacity in cast iron 45 mm Drilling capacity in steel 32 mm Longitudinal movement range (X) 560 mm Transverse movement range (Y) 190 mm Vertical travel range (Z) 350 mm Tool holders ISO40/Morze 4 Spindle - column distance 460 mm Distance between spindle nose and table surface 445 mm Spindle stroke 120 mm Total machine height in Z upper position 1450 mm Spindle can be tilted +/-90 degrees Spindle power 1.1/1.5 / 400V Machine weight 480 kgs Dimensions 1280 x 960 x 2100 mm Accessories - Thread cutting function - 3-way path measuring system - Y+Z axis covers - ISO40 drill chuck adapter - Built-in digital depth gauge - Automatic X-axis stepless feed and rapid traverse - Motorized gear lifting and lowering - Machine lamp - Cast iron machine base Chsdpfx Aexz D Npob Tsf The machine is in brand new condition. Never used in production.

Condition: excellent (used), Year of construction: 2003, Deep Hole Drilling and Milling Machine TBFZ 1600 CNC Year of manufacture: 2003 X-AXIS TRAVEL: 1600 MM Y-AXIS TRAVEL: 1200 MM Z-AXIS TRAVEL: 500 MM W-AXIS TRAVEL: 1200 MM B-AXIS TRAVEL: 360° (Rotary table) * Table size (LxW): 1500x1500 mm * T-slots: 5x DIN 650-22 h12, 150 mm spacing Chodoxz Aygjpfx Ab Tsf * Tool clamping: hydraulic * Electrical connection: 400 V, 50 Hz * Compressed air connection: rated flow rate 7000 l/min, operating pressure: 6 bar * Botek driller optionally available * Feed drive: brushless AC servo motors * Feed rate: 0-20000 mm/min * Rapid traverse: X 20000 mm/min, Y+Z 20000 mm/min * Manual mode: 20000 mm/min * Setup operation: 0-2000 mm/min

Condition: good (used), Year of construction: 2000, machine/vehicle number: 7853, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, table length: 6,000 mm, table width: 2,000 mm, table load: 17,000 kg, Travelling column milling machine | FPT Sirio-M50 - Heidenhain control system - 60-position automatic tool changer - Coolant treatment and filtration unit - Chip conveyor - Cooling unit, manufacturer Deerosdassi (Italy) Csdpjxzzlhofx Ab Tjhf - Electrical cabinet - Full machine enclosure (protective housing) An inspection is possible at any time by appointment.

Condition: good (used), functionality: fully functional, spindle diameter: 30 mm, milling spindle length: 140 mm, height adjustment type: electric, type of input current: three-phase, rotational speed (min.): 3,000 rpm, rotational speed (max.): 10,000 rpm, SCM T130E Spindle Moulder Spindle diameter: 30 mm Spindle length: 140 mm Variable spindle speed: 3000/4500/6000/7000/10000 RPM Cedpjxzyltjfx Ab Tehf Main motor power: 7.5 kW Electronic spindle height adjustment via switch 4-roller feed unit Feed speed adjustment via variator CE certificate DTR technical documentation

Condition: excellent (used), DECKEL FP 2 LB Tool Milling Machine from University in Well-Maintained Original Condition - 3-axis digital readout "ACURITE" - Travel (X/Y/Z): 795x300x400mm - Automatic feeds / rapid traverse on all 3 axes (18 settings) - Spindle speeds 40-2000 rpm (18 steps) - Horizontal and vertical milling attachments - ISO 40 tool holders - Table clamping surface: 1000x440mm - Table clamping surface with auxiliary table: 1000x700mm - Swivelling vertical head with quill - Coolant system - Various tool holders - Machine light - Documentation Chjdpox Da Erjfx Ab Tjf Dimensions: LxWxH: 2.5x2.4x1.8 meters / Weight: 2200 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 1989, Philips CNC 432 control Travel paths X/Y/Z 600 x 400 x 450 mm Chedpfoxc N Iyjx Ab Tef Spindle speed 4,000 rpm 20-position tool magazine SK 40 4th axis Lehmann

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 3000 x 1300 x 2000mm, Table 2000 x 1600mm, table load 13,000 kgs, B axis 360 degrees, Heidenhain iTNC530, Cjdpfevz A Risx Ab Tjhf ISO SK50 spindle taper, 5,000rpm Spindle Speed, 60 station toolchanger, coolant, Interlocked guards.

Condition: used, travel distance X-axis: 16,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 4,000 rpm, spindle motor power: 37 W, X-AXIS TRAVEL: 16,000 MM Z-AXIS TRAVEL: 1,500 MM Y-AXIS TRAVEL: 3,500 MM SPINDLE MOTOR POWER: 37 KG SPINDLE NOSE CONNECTION: ISO 50 SPINDLE SPEED: 4,000 RPM HEIDENHAIN iTNC 430 CNC Chodpjx A Ulwofx Ab Tsf 80-POT TOOL CHANGER 2.5° X 2.5° AUTOMATIC HEAD INTERNAL AND EXTERNAL COOLANT HEXAGON WORKPIECE PROBE 2000 X 2000 MM ROTARY-TRANSLATING TABLE, 15 TON LOAD CAPACITY, 1500 MM V-AXIS STROKE OPERATOR CABIN WITH OPERATOR FIXED PLATES CHIP CONVEYOR

Condition: good (used), Year of construction: 1992, Travel X/Y/Z: 1000/500/500 mm Control: Heidenhain TNC 415 B Spindle: SK 40 Chedpfx Abotmtvls Tjf Speed range: 0 - 5000 rpm Coolant device Universal milling head Can be swiveled and manually indexed via scale, can be swiveled away for horizontal machining

Condition: good (used), functionality: fully functional, Infinitely variable feeds on all axes Quill stroke 60 mm Table surface 600 x 250 mm Spindle speeds 45 - 1950 rpm Feeds 10 – 470 mm/min...infinitely adjustable... : Codpfxex A S Dqj Ab Tjhf Longitudinal travel (X) 315 mm Cross travel (Y) 180 mm Vertical travel (Z) 320 mm .

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Cedpfx Asw Nklhob Tjhf Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, Year of construction: 1990, x-travel 450 mm y-travel 400 mm z-travel 400 mm control Heidenhain 355 total power requirement 4 kW Chsdpspxrknofx Ab Tjf weight of the machine ca. 2,4 t

Condition: used, Year of construction: 1982, x-travel 300 mm y-travel 160 mm z-travel 340 mm feeds -stepless- 5-500 mm/min rapid traverse 1200 mm/min spindle turning speed range 40 - 2000 U/min tool taper Normkegel 40 table length 600 mm table width 120 mm voltage 380 V frequency 50 Hz Cjdpjvvnfusfx Ab Tehf rated current 13 A weight of the machine ca. 0,750 t dimensions of the machine ca. 1,8 x 1,5 x 1,8 m DESCRIPTION Machine incl: active three-axis digital readout HEIDENHAIN documentation various tool holders Machine vice etc.

Condition: used, functionality: fully functional, Friedrich Deckel Grinder Chedpfsxzpq Ssx Ab Tof Model S1 In good condition

Condition: reconditioned (used), Year of construction: 1984, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1984 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray Mach. no.: 2102-2520 Codpfxjhtq Edo Ab Tjhf with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X, Y and Z axes - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions - used as seen -

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Chsdpfxetrhq He Ab Tof Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, Year of construction: 1999, x-travel 4000 mm y-travel 1000 mm z-travel 1500 mm Codpfx Aboxzuz Ne Tohf Control Heidenhain 355 weight max. 10 t ja more pictures available

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 1 Year of manufacture: 1976 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray / RAL5008 gray-blue Mach. No.: 52860/08 Milling head number: 7296/80 Chedpfx Abemhfrro Tjf Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-M, new - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions Used as seen The machine corresponds technically to the state of the year of manufacture.

Condition: reconditioned (used), Year of construction: 1987, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1987 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray Mach. no.: 2102-3429 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X, Y and Z axes Chodpfx Abshtrd Ij Tsf - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Central lubrication, electric - Operating instructions - Used as seen -

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 2 Year of manufacture: 1976 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. No.: 6976 with guarantee geometric acceptance with test report Accessories: - 3-A digital display Chodpfx Abod Tytys Tef FAGOR Innova 30i-M, new - Fixed table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Coolant system - Operating instructions -used, as seen-

Condition: reconditioned (used), Year of construction: 1978, Universal tool milling machine Make: DECKEL Model: FP 2 stepless Year of manufacture: 1978 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. no.: 2202-10147 with guarantee geometric acceptance with test report Accessories: - 3-axis digital display HEIDENHAIN ND 780 - Universal table 700 x 240 mm (T-slot: 12 mm) Csdsfcqfpepfx Ab Tjhf - Vertical milling head SK 40 with drawing thread S 20 x 2 - Central lubrication, manually operated - Coolant system - Operating instructions - Used, as seen -

Condition: reconditioned (used), Year of construction: 1983, Universal tool milling machine Make: DECKEL Model: FP 2 Active Chjdpfofzk Hfex Ab Tsf Year of manufacture: 1983 - overhauled, repainted RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2202-10799 Milling head type: 2271 Milling head number: 300-1406 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Fixed table 700 x 280 mm (T-slot: 12 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Central lubrication, manually operated - Coolant system - Operating instructions - Used, as seen -

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 4 M Aktiv Year of manufacture: 1988 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Chjdpfxslfc U Dj Ab Tof Mach. no.: 2203-7097 with guarantee geometric acceptance with test report Accessories: - 3-axis digital display HEIDENHAIN TNC 113 - Fixed table 800 x 460 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamp DIN 2080 - Chip tray - Central lubrication, electric - Coolant system - Operating instructions Used as seen The machine is technically corresponding to the state of the year of manufacture.

Condition: reconditioned (used), Year of construction: 1994, Universal tool milling machine Make: DECKEL Model: FP 4 MK Aktiv Year of manufacture: 1994 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey Csdjfzbtmepfx Ab Tohf RAL5008 grey blue Mach. no.: 2203-8668 with guarantee geometric acceptance with test report Accessories: - 3-axis digital display HEIDENHAIN TNC 113 - Universal table 660 x 380 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamp DIN 2080 - Chip tray - Central lubrication, electric - Coolant system - Operating instructions -used, as seen-

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 L Active Year of manufacture: unknown - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2302-2319 Milling head type: 2271 Milling head number: 700-0883 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Central lubrication, electric - Coolant system - Operating instructions - Drill grinding device with diamond disk -used, as seen- Chjdpeh Rv U Eofx Ab Tjf