Used Pneumatic Tapping Machine for sale (67,798)

Condition: used, Thread cutter, tapping machine, tapping machine Godpfx Anod R Nfqj Rebl -Nominal consumption: 280 watts -Max. Cutting capacity: M8 -Connection: 220 volts -Dimensions: 290/200/H60 mm -Weight: 2.1 kg

Condition: used, Thread cutter, tapping machine, tapping machine -Integrated reversing gear with fast reverse -Nominal consumption: 230 watts -Max. Cutting capacity: M6 Gjdjcm I T Uspfx An Rjbl -Connection: 230 volts -Weight: 2.3 kg

Condition: good (used), Pneumatic filling machine with filling bend Function The machines work according to the piston principle of suction - discharge. One or two dosing pistons are driven by pneumatic cylinders. The desired filling quantity is set using a handwheel on a scale on the machine. ■ Pneumatic volumetric piston dispenser Filling capacity 300-800 pieces/h ■ Dosing accuracy +-0.5% ■ Immediately ready for operation, easy handling ■ Easy to clean ■ Filling range 8 - 80 ml / interchangeable cylinder Self-priming ■ Easy to transport for different locations Areas of application: Production and laboratory Chemical industry - cosmetics industry Food and pharmaceutical industry Paint and varnish industry Gsdpfxjrt Un Es An Rsbl Type: H 80-P-MV Filling range 8 - 80 ml Filling times: 300 - 800 h Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: used, Year of construction: 1992, machine/vehicle number: 27123, Offer 25466 Technical Data: - Cutting length up to 125 mm - Cutting thickness - at 400N/mm² tensile strength: 4 mm - at 700N/mm² tensile strength: 2.5 mm - Aluminium, plastic: 6 mm - Cutting angle: 90° - Depth stops Gjdpfx Ajyfchgen Rebl - Foot pedal - Space requirements approx. W 700 x H 1400 x D 800 mm - Weight approx. 150 kg

Condition: good (used), Tapping machine, bench drilling machine -Spindle mount: B12 -Tap chuck: Tapmatic 30 X M1.5-M7 Gbedsb A Imxopfx An Rsl -Projection: 165 mm -Motor power: 0.25 kW -Weight: 60 kg

Condition: used, Year of construction: 2021, Drawer Clamping Machine – STROMAB STC 2500 B Technical Description: • Working capacity: 2100 x 1000 mm • No. 2 working stations • Two-hand safety control button • No. 8 pneumatic cylinders, diameter 115 mm • Thrust per cylinder: 700 kg • No. 8 cast iron squares, height 170 mm Machine Configuration: • Frequency: 50 Hz • Standards: CE compliant Gbedpoxg I Slefx An Rol • Electrical supply: 400 V – three-phase

Condition: new, Year of construction: 2025, Speeds: Level 1: 37-185 rpm Level 2 150-750 rpm Torque in Nm 165+42 Holder size 2 diameter 31 Capacity M3-M24 Working range R = 1800mm Working height (without wheels) 805mm Gbodovu Uhtepfx An Rsl Includes: Ball-bearing, wear-free parallel arm radius: 1800mm 400V/3ph hydraulic system Clamping table 800x600mm with 3 T-slots 19mm Working and return speeds can be set separately electronically (using a frequency converter) Digital depth setting D-Touch, work cycle of your choice Manual: direction of rotation right/left using push buttons Automatic: digital input of depth, the direction of rotation is reversed at the set depth. Digital speed display (in the D-Touch control) Micro spray system for tool lubrication (integrated in the machine head) Quick-change holder for Bilz thread cutting holder with slip clutch, among others incl. 1 set of running wheels 1 set of thread cutting holder M4-M22/24 1 piece reducing ring for M4

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 901 S Pnömatik Alüminyum Köşe Presi Makinası, - Conforms to CE standards - Corner press machine designed for 90 degree joining of aluminum profiles - 2 top presses and blade movement is pneumatic - There is a mm ruler system for the height and advancement of the blades. - Centering miter wedge is automatic - Drain button available for fine adjustment - Pneumatic presses use 2 pedals to squeeze the profile - Profile surfaces are polyamide sheet to prevent damage - Side support arms available Godpfxorbiv As An Rjbl

Condition: like new (used), functionality: fully functional, total height: 150 mm, jaw height: 40 mm, clamping width: 160 mm, clamping range: 200 mm, clamping length: 200 mm, - Extremely stable and robust - pneumatic - barely used - 5 units available Gbjdpfxsx Rp Eke An Rel - New price over 5,000 euros

Condition: used, Pneumatic C-frame press RECTUS - FRIEDMANN & MAIER Type K3000 / 50 / 6A Pneumatic press Serial No. 3437 Year approx. 1990 Pressing force 3.0 tons at 6 bar Pressing force 2.6 tons at 5 bar Pressing force 2.2 tons at 4 bar Pressing force 1.6 tons at 3 bar Pressing force 1.0 tons at 2 bar Throat depth 150 mm Power stroke 6 mm Approach stroke 50 mm Total stroke 56 mm Ram surface Ø 100 mm Tool holder Ø 12 mm Maximum installation height 180 mm Table size 200 x 200 mm Compressed air requirement max. 6 bar - Pneumatic power cylinder with mechanical force amplifier (wedge-lever principle) Gbodpfow A Srwex An Rsl - Press cylinder height-adjustable on column via threaded spindle (50 mm) - Without pneumatic control system - Throttle valve for stroke speed adjustment Space requirement (L x W x H) 440 x 230 x 750 mm Weight 127 kg Good condition

Condition: good (used), Drilling capacity: up to 10 mm Spindle mount: drill chuck Speed range: Diameter pulleys Motor side: Gbedpfx Ash Hrkien Rsl Spindle side: 38; 48; 66; 78 mm 90; 104; 120; 133 mm Motor speed: 800 rpm stroke: 100 mm throat: 300 mm table: 400 x 400 mm distance table - drill chuck max: 580 mm distance table - drill chuck min: 130 mm table: 400 x 400 mm footprint: 750 x 480 mm total power: 0,4 kW accessories/equipment: drill chuck Condition: good weight: 170 kg dimensions: 750 x 480 x 1.450 mm

Condition: used, Internal threading machine Hagen & Goebel type HG 124 Machine no. No. 4112 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M15 Cutting capacity in brass M3 to M17.5 throat depth 250 mm Pinol stroke 80 mm Table size 345 x 245 mm Gedpfx Aehgnd Ajn Rjbl Spindle speed 200 - 1000 rpm Motor power 0.55 / 1.0 kW Mains connection 380 Volt, 50 Hz - 6 speed levels via belt change (3 levels via belt + 2 motor speeds) - Thread pitch via guide cartridge - 2 guide cartridges with 0.8 mm and 28 G per inch thread pitch - Table height adjustment with toothed rack via hand crank on the round column - Spindle holder with cone Ø 14.8 to 16 mm - Gear rim drill chuck Ø 1 to 13 mm Space requirement L x W x H 900 x 500 x 1800 mm Weight 260 kg Good condition

Condition: used, Hydro-pneumatic machine vice HILMA - ROEMHELD Type SMPH 125 Jaw width: 125 mm Jaw height: 45 mm Clamping force: 3 tons at 7 bar Clamping force: 2 tons at 5 bar Clamping range: 0 to 210 mm Maximum opening: 214 mm Guideway height: 67 mm - Hydro-pneumatic force amplifier - 3 clamping ranges adjustable via positioning pin from 0 to 214 mm Dimensions (L x W x H): 550 x 260 x 135 mm Gsdpsxw Rdfofx An Rebl Net weight: 33 kg in good condition

Condition: used, Table threading machine M1 - M10 Height adjustment via toothed rack and hand crank, motor 0,22+032 kW motor rpm 1420/ 2770 spindle Upm 480 - 580 Weight 100 kg Tapping chuck with key Gedpfsda I E Dsx An Rebl Under table Connection cable with 16 A CEE plug

Condition: used, Year of construction: 2003, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, FANUC ROBODRILL T21i DL CNC DRILL-TAP MACHINE MAKE FANUC, MADE IN JAPAN MODEL ROBODRILL T21i DL CONTROL FANUC 16I-MB YEAR 2003 Gbodpjtnh Alsfx An Rel TABLE SIZE 850.0 x 410.0 mm TRAVERSES X Y Z 700.0 x 400.0 x 330.0 mm SPINDLE SPEED 10 – 20,000 RPM ATC 21 STATIONS SPINDLE TRAPER ISO 30 RAPID TRAVERSE 54m/min DISTANCE BETWEEN SPINDLE NOSE TO TABLE 150.0 mm – 480.0 mm CUTTING FEEDRATE 1 – 30,000mm/min TOOL CHANGE TIME 1.6 sec MAX TOOL DIA 80.0 mm MAX TOOL LENGTH 200.0 mm MAX TOLL WEIGHT 2 kgs POWER RATING 5.5 Kw PLUS SWARF TRAY COOLANT SYSTEM SET OF TOOLING SET OF MANUALS

Condition: new, thread dia. M10 - M33 mm 35/115 U/min. 320 Nm Gsdsfg U Sljpfx An Rjbl air pressure 6 - 8 bar working area 400 - 2000 mm

Condition: new, thread dia. M5 - M16 mm 250 U/min. 48 Nm air pressure 6 - 8 bar working area 150 - 1900 mm Gbjdpfjfg U Siex An Rel The pneumatically driven D-JSC tapping machine has, among other things, one Air motor with quick chuck and a stable and flexible Labor arm. The mounting arm can be attached directly to the work table using the mounting flange and is ready to work immediately. This means fast changeover times guaranteed. It is possible to simply tap the tap to the desired hole to be attached without having to position the component under the tap. Version with an adjustable angle, whereby the quick chuck can tilt so that horizontal tapping is also possible. Pneumatic tapping machines for M5 - M16 threads, angle adjustable. 6 pcs. Quick change chucks with slip clutch. Optional: - Clamping table with T-slots: 750x600x650mm or 990x700x800mm. - magnetic base.

Condition: new, thread dia. M3 - M8 mm Gbedpjfg U Snofx An Rjl

Condition: new, thread dia. M3 - M16 mm max. 187 U/min. working area 180 - 2000 mm engine output 0,7 kW Electric tapping machines for M3 - M16 thread, Angle adjustable. 9 pcs. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. optional: Gbedpfx Anjfg U Sqe Rel Clamping table with T-slots: 990x700x800mm. Magnetic base. Also available: M14 to M24 and M27 to M33.

Condition: good (used), 1 x Drill + tap machine Steinel GT.6.52 Technical data: Speeds: 500/630/1000/1250 rpm power in steel: M 6 max.clamping diameter collet: 10 mm Gbsdsma Efyjpfx An Rjl The machine can be visited under power.

Condition: new, thread dia. 12 mm max. 600 U/min. working area max. 1100 mm Gbsdpfx Anofg U Suj Rel engine output 0,6 kW weight 30 kg Electric tapping machines for M3 - M12 threads, 8 pcs. quick-change chuck with slipping clutch. Adjustable via display: variable speed, adjustable depth, choice of Main direction of rotation, torque. Documentation in English! Options: - Clamping table with T-slots: 990x700x800mm. - Magnetic base.

Condition: new, thread dia. M3 - M12 mm 400 U/min. 28 Nm air pressure 6 - 8 bar working area 150 - 1900 mm weight of the machine ca. 12 kg Gsdpfxjd Iinuj An Rjbl Pneumatic Tapping Machines for M3 - M12 thread, angle adjustable. 6 pcs. Keyless chuck with clutch. optional: Working table with T-slots: 750x600x650mm 990x700x800mm or. Magnetic base. Available up to max. M16, M22 and M33.

Condition: new, thread dia. M3 - M12 metrisch Gsdpfx Anshiptco Rebl 400 U/min. 0 6 - 8 bar working area max. 1100 mm weight 15 kg dimensions 700 x 280 x 200 mm Pneumatic tapping machine Type with an adjustable angle, horizontal tapping possible Pneumatic tapping machines for M3 - M12 threads, angle adjustable. 8 pcs. quick-change chuck with slipping clutch. Documentation in English! Optional: clamping table with grooves type: FL-WB

Condition: new, thread dia. 12 mm 375 U/min. Gbodpfxefg U Spe An Rel working area 180 - 1000 mm engine output 0,7 kW

Year of construction: 2000, condition: good (used), Offer 20158 Gjdpfx Aspvkm Ten Rebl Technical data: - Tapping capacity up to approx. M 16 - Tapping depth approx. 75 mm - Drill feed down + up infinitely variable - throat depth 90 mm - Spindle speed up to 290 rpm - Pneumatic connection with pressure reducer 6 bar - Pneumatic foot switch - drive 400 V / 0,75 kW - Space requirement approx. W 700 x H 2250 x D 800 mm - Weight approx. 150 kg