Used Plate Turner for sale (11,390)

Condition: good (used), Year of construction: 2017, Refurbished: 2017 Kwsdpfx Ahoqrq Hvovjw Format: max 360 x 650 mm; min 80 x 100 mm Folding capacity: max 150 m/min Power requirement: 2 kW (220/380V, 50Hz) Length: 2,130 mm Width: 1,230 mm Height: 1,500 mm Net weight: 370 kg (approx.) Equipment - Flat pile feeder with Tremat suction head - Counting device 1st folding unit: - 6 buckle plates - FESTA folding roller adjustment - Downstream slitter shaft - Noise protection device 2nd folding unit: - Hook-on knife folding unit - FESTA folding roller adjustment - Delivery Accessories: - Operating instructions - Electrical circuit diagrams - Spare parts catalog - Standard tool Condition - as is, cleaned available - immediately

Year of construction: 1989, condition: used, Size max 360 x 650 mm min 80 x 100 mm Speed max 150 m/min Equipment • flat pile feeder 1st folding unit: • 4 buckle plates Kwodpfx Ahec Rhvtsvjw • Festa foldingrolleradjustment • noise prevention

Condition: ready for operation (used), Size with pallet feeder max 660 x 1040 mm Speed max 210 m/min Equipment • pallet feeder with Tremat suction head 1st folding unit: • 4 buckle plates • noise prevention peripheral units and deliveries • marking device MKE 66 Kwjdpfx Asd Iq S Rohvow • upright stack delivery with pressing SBP 66

Year of construction: 1997, condition: good (used), Built in 1997 Size 1.300 x 1.650 mm Speed 150 m/min Equipment feeder • pallet feeder (MABEG) 1st folding unit • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers Kwsdpsdymm Hsfx Ahvow • rear-mounted slitter shafts • noise prevention 2nd folding unit • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention 3rd folding unit • 2 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention delivery • belt delivery

Condition: good (used), Size max 360 x 650 mm min 80 x 100 mm Speed max 150 m/min Equipment Kwjdpfehf Aw Usx Ahvew • flat pile feeder • counter PCS 100 1st folding unit • 4 buckle plates • Festa foldingrolleradjustment • pu steel folding rollers • noise prevention 2nd folding unit • attachable knife-folding unit • mobile knife-folding unit KB 36 peripheral units and deliveries • attachable belt delivery

Year of construction: 1999, condition: good (used), Built in 1999 Size max 820 x 1.750 mm Size with continuous feeder max 820 x 1.750 mm min 150 x 150 mm Speed max 205 m/min Length with continuous feeder 7.680 mm Width 3.210 mm Equipment feeder: continuous feeder 1st folding unit: 6 buckle plates motorized setting of buckle plates rear-mounted slitter shafts 2nd folding unit: working width max. 68 cm 6 buckle plates Ksdpfxofbff Us Ahveww motorized setting of buckle plates rear-mounted slitter shafts peripheral units and deliveries belt delivery

Year of construction: 1997, condition: used, Built in 1997 Size with flatpile feeder max 520 x 840 mm min 100 x 150 mm Speed max 180 m/min Kwsdpfx Ajdm U Dhehvew Equipment: • flat pile feeder • counter 1st folding unit: • 4 buckle plates 2nd folding unit: • 4 buckle plates peripheral units and deliveries: • belt delivery

Condition: ready for operation (used), Size with flatpile feeder max 660 x 1040 mm Speed max 210 m/min Equipment Ksdpfxod Iq S Uo Ahvsww feeder • flat pile feeder • Tremat 1st folding unit • 4 buckle plates • noise prevention 2nd folding unit • 4 buckle plates • noise prevention delivery • delivery SBP 46

Condition: good (used), Size: 1.300 x 1.650 mm Speed: 150 m/min Equipment: feeder: • pallet feeder (MABEG) • counter MCC 3 1st folding unit: • separate deflectors • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • separate deflectors • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: • separate deflectors • 2 buckle plates • rear-mounted slitter shafts • noise prevention 4th folding unit: • separate deflectors • 2 buckle plates Kodpfx Ajdyk Rlehveww • rear-mounted slitter shafts • noise prevention

Condition: ready for operation (used), Size max 560 x 920 mm min 150 x 180 mm Speed max 180 m/min Equipment feeder: • continuous feeder Kodped A Hcvsfx Ahvoww • MS control • counter 1st folding unit: • 4 buckle plates • noise prevention delivery: • belt delivery

Year of construction: 2002, condition: used, Size max 1.120 x 1.450 mm min 250 x 250 mm Speed max 10-16 m/min Equipment: feeder • pallet feeder (MBO) • MC control 1st folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: • 2 buckle plates • rear-mounted slitter shafts Kedpoddh Evefx Ahvoww • noise prevention delivery: • belt delivery

Condition: good (used), Year of construction: 2007, sheet width 1350 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 35 Hub/min cutting angle 2.0 Grad table height 945 mm distance between columns 1361 mm Control CIDAN / SIEMENS engine output 5.5 kW Kwsdpfxeyuzcuj Ahvsw weight of the machine ca. 1400 kg range L-W-H 2200 x 2000 x 1550 mm Features: - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction - compact and clear machine construction - NC electro-motorized backgauge, with digital display * Target / actual value stop value input * stepless adjustment over the entire travel range - 1x hold-down bar - 1x material side stop - recessed grips in the front support table - Manual cutting gap adjustment from the front - Rear sheet holding device for thin sheets - 1x freely movable foot switch - Operating instructions (PDF)

Condition: ready for operation (used), sheet width 1540 mm plate thickness 5.00 mm pre-bending 4.25 - 6.00 mm diameter of upper rolls 150 mm voltage 400 V total power requirement 4.0 kW weight of the machine ca. 1630 kg range L-W-H 2520 x 890 x 1070 mm Features: - Robust electric three-roll bending machine - Drive via spur gear brake motor + reduction gear - Asymmetrical roll arrangement Kjdpfxsyuzcbs Ahvjww - Electric adjustment of the rear roll * with automatic/electric shut-off * Minimum/maximum travel adjustment possible - Rotating control panel - Swiveling upper roll - Conical bends by tilting the lower and rear rolls - 1x freely movable double foot switch * Right/left rotation of the rolls - Manual adjustment of the lower roll via handwheel - With analog position indicator - Electric safety device (cable) - Original operating instructions * Further technical data for steel 400 N/mm²: - 1.5 x upper roll diameter with bending .. 4.25 mm - 1.5 x upper roll diameter without bending .. 5.00 mm - 5 x upper roll diameter with Bending angle .. 6.00 mm

Condition: ready for operation (used), functionality: fully functional, aergerstrgsetgsertghs Kedpfx Ajywfkpshvoww

Condition: new, Year of construction: 2024, neu 2024 9738 prompt, Zwischenverkauf v Türkei 20300 € Kwjdjwirulopfx Ahvjw 389.76 € 1 1530 mm 6 mm 6 mm 4 mm 150 mm 4 kW 3100 mm 1120 mm 1020 mm 2100 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo)

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Handle hole motor Faceplate motor Lubrication system Extraction connection D 80/100 mm Space requirements approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Kedpfx Ahjyuty Ssvjww Storage location: at customer's site Sale as is, as inspected, without guarantee or warranty

Condition: good (used), We offer you: Ksdpoyvqfvjfx Ahvjww 6 pallet units for DMC 80 U Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in technical data and details, as well as prior sale!

Condition: good (used), Pile Turner Toppy Twister 1000 AJ Silver h=2000 Fully operational, ready to work. Perfect condition. Year of manufacture: 2016. Made in Italy. Kjdpfeyur Iusx Ahvoww This machine has an increased stack height of up to 200 cm. Equipment: Aeration, shaking, side margin. Technical specifications: Format: 1200×800 mm Stack height: 2000 mm Load capacity: 1200 kg Device weight: 1300 kg Power consumption: 9 kW Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, takes up little space. Includes a ramp.

Condition: good (used), Busch SWH 125 RLA (175) Pile Turner Aeration Jogger Fully operational and ready for operation. Kjdpfxeyur Hwe Ahvsww This turner is from the German manufacturer Gerhard Busch. Extended stack height up to 175 cm. Equipment: Aeration, shaking, side margin. Technical specifications: Format: 1250 x 900 mm Stack height: 1750 mm Load capacity: 1200 kg Device weight: 1500 kg 380V power supply Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, space-saving.

Condition: good (used), MV Technik MPR 10 Mobile Pile Turner Fully operational, ready to use. Very good condition. Kodpfx Aeyur Dvjhvsww Made in the Czech Republic. Technical specifications: Maximum format: 1600×1200 mm Load capacity: 1000 kg Maximum stack height: 1560 mm Device weight: 1640 kg Manufactured in 2016. Includes battery charger and pre-assembled lithium-ion battery. Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, space-saving.

Condition: used, functionality: fully functional, actuation type: hydraulic, roller (top) diameter: 420 mm, sheet thickness (max.): 25 mm, Hydraulic cylinder Brand: Casanova Bending length: 3,100 mm Maximum bending thickness: 25 mm Top roller diameter: 420 mm The side rollers are raised parallel, without inclination. New control and command panel, installed and modified in 2003. Equipped with hydraulic flag and hydraulic side table. Ksdpfx Aheydk D Hsvjww Pit dimensions: - 200x6800 mm - 555 mm depth

Condition: used, Diameter: 630 mm Height: 170 mm Dividing head base on table: 690 mm Taper: Morse 5 / 65 mm Admissible weight: 550 kg Dividing head weight: 302 kg Kjdpfx Ahew H Rmzeveww

Condition: excellent (used), Year of construction: 2009, Brand: Oerlikon / SAF Kwjdpfx Aholffdyovsw Model: LP100 Year 2009 Type: Self-aligning/Self-centering Capacity: 100T Diameter range: 2000 to 4500 mm. Turning speed: 100-1200mm/min. Wheel width: 235mm Wheel diameter: 450mm Distance between translation wheels: 1930mm between tabs Translation speed: 4m/min. It has a cable control with buttons for the direction of rotation, speed variator and translation of the turner. Power: Three-phase 380V They have manual and Ce.

Condition: like new (used), machine/vehicle number: 22-01050762, functionality: fully functional, Used divider plate Brand: Meca-Divimek 160mm 3-jaw chuck It has a point. Brake torque: 30kg Servomotor: 2000 rpm Kedpor Epa Iefx Ahvoww Weight: 70kg Maximum load admitted horizontally: 150kg Vertical position at 200mm: 75kg (With counter-point: 150kg) Servo drive used Brand: Fagor Automation Model: ACS-10 S/N: 22-01050762

Condition: new, load capacity: 10,000 kg, rotational speed (distance/time): 1,000 mm/min, Capacity: 10Tn Type: Self-aligning Minimum diameter: 320 mm Maximum diameter: 2.800 mm Wheel dimensions: 300 x 160 mm (Diameter x Width) Kwedpfx Ahsuf A Ahevsw Wheel coating: Polyurethane rubber Rotation speed (Min.-Max.): 100 - 1.000 mm/min. Motor power: 1,1 KW Inverter: Danfoss Electrical components: Schneider Included: 1 motor-driven + 1 idler Control unit with 6 meter extension pole and digital display with the speed of rotation.