Used Plate Cleaner for sale (11,865)

Year of construction: 1991, condition: used, Built in 1991 Size max 700 x 1.000 mm min 150 x 200 mm Buckle width min 60 mm Speed max 25-160 m/min Equipment • continuous stream suction feeder • counter IZVA 341 1st folding unit: • 4 buckle plates • rear-mounted slitter shaft • 2. rear-mounted slitter shaft • noise prevention 2nd folding unit: • 4 buckle plates • rear-mounted slitter shaft • noise prevention 3rd folding unit: • 2 buckle plates • rear-mounted slitter shaft delivery: • belt delivery Lrodpfx Aoc Idn Ujhvei

Condition: good (used), Year of construction: 2017, Refurbished: 2017 Format: max 360 x 650 mm; min 80 x 100 mm Folding capacity: max 150 m/min Power requirement: 2 kW (220/380V, 50Hz) Length: 2,130 mm Width: 1,230 mm Height: 1,500 mm Net weight: 370 kg (approx.) Equipment - Flat pile feeder with Tremat suction head - Counting device 1st folding unit: - 6 buckle plates - FESTA folding roller adjustment - Downstream slitter shaft - Noise protection device 2nd folding unit: Lodpfx Asqrq Hvehvsri - Hook-on knife folding unit - FESTA folding roller adjustment - Delivery Accessories: - Operating instructions - Electrical circuit diagrams - Spare parts catalog - Standard tool Condition - as is, cleaned available - immediately

Condition: ready for operation (used), Size with pallet feeder max 660 x 1040 mm Speed max 210 m/min Lrsdpfjd Iq S Rjx Ahvji Equipment • pallet feeder with Tremat suction head 1st folding unit: • 4 buckle plates • noise prevention peripheral units and deliveries • marking device MKE 66 • upright stack delivery with pressing SBP 66

Year of construction: 1989, condition: used, Size max 360 x 650 mm min 80 x 100 mm Speed max 150 m/min Equipment • flat pile feeder Lrsdpfxjc Rhvto Ahvoi 1st folding unit: • 4 buckle plates • Festa foldingrolleradjustment • noise prevention

Year of construction: 1999, condition: good (used), Built in 1999 Size max 820 x 1.750 mm Size with continuous feeder Lrjdpfjfbff Ujx Ahvji max 820 x 1.750 mm min 150 x 150 mm Speed max 205 m/min Length with continuous feeder 7.680 mm Width 3.210 mm Equipment feeder: continuous feeder 1st folding unit: 6 buckle plates motorized setting of buckle plates rear-mounted slitter shafts 2nd folding unit: working width max. 68 cm 6 buckle plates motorized setting of buckle plates rear-mounted slitter shafts peripheral units and deliveries belt delivery

Year of construction: 1997, condition: good (used), Built in 1997 Size 1.300 x 1.650 mm Speed 150 m/min Equipment feeder • pallet feeder (MABEG) 1st folding unit • 4 buckle plates • separate deflectors Ledpfxjdymm Ho Ahvsri • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention 2nd folding unit • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention 3rd folding unit • 2 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention delivery • belt delivery

Condition: good (used), Size max 360 x 650 mm min 80 x 100 mm Speed max 150 m/min Equipment • flat pile feeder • counter PCS 100 1st folding unit Lsdpfx Aohf Aw Ujhveri • 4 buckle plates • Festa foldingrolleradjustment • pu steel folding rollers • noise prevention 2nd folding unit • attachable knife-folding unit • mobile knife-folding unit KB 36 peripheral units and deliveries • attachable belt delivery

Year of construction: 1997, condition: used, Built in 1997 Size with flatpile feeder max 520 x 840 mm min 100 x 150 mm Speed max 180 m/min Equipment: • flat pile feeder • counter Lrodpfxodm U Dho Ahvsi 1st folding unit: • 4 buckle plates 2nd folding unit: • 4 buckle plates peripheral units and deliveries: • belt delivery

Condition: ready for operation (used), Size with flatpile feeder max 660 x 1040 mm Speed max 210 m/min Equipment feeder • flat pile feeder • Tremat 1st folding unit • 4 buckle plates • noise prevention 2nd folding unit • 4 buckle plates • noise prevention delivery • delivery SBP 46 Lrsdpfxsd Iq S Uo Ahvji

Condition: good (used), Size: 1.300 x 1.650 mm Lrjdpodyk Rljfx Ahvsi Speed: 150 m/min Equipment: feeder: • pallet feeder (MABEG) • counter MCC 3 1st folding unit: • separate deflectors • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • separate deflectors • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: • separate deflectors • 2 buckle plates • rear-mounted slitter shafts • noise prevention 4th folding unit: • separate deflectors • 2 buckle plates • rear-mounted slitter shafts • noise prevention

Condition: ready for operation (used), Size max 560 x 920 mm min 150 x 180 mm Speed max 180 m/min Equipment feeder: • continuous feeder • MS control • counter 1st folding unit: • 4 buckle plates • noise prevention delivery: • belt delivery Ljdpfx Ahod A Hcvoveri

Year of construction: 2002, condition: used, Size max 1.120 x 1.450 mm min 250 x 250 mm Speed max 10-16 m/min Ledpfxsddh Eve Ahvori Equipment: feeder • pallet feeder (MBO) • MC control 1st folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: • 2 buckle plates • rear-mounted slitter shafts • noise prevention delivery: • belt delivery

Condition: excellent (used), Year of construction: 2017, operating hours: 966 h, functionality: fully functional, machine/vehicle number: G57200327, operating pressure: 500 bar, pressure: 500 bar, fuel: diesel, temperature: 100 °C, pump capacity: 30 l/min, Falch TrailJet 30 500-30-100-d – Hot Water High-Pressure Trailer Year of manufacture: 2017 | Operating hours: 966 h | Condition: well-maintained & ready for immediate use LOW OPERATING HOURS – IMMEDIATELY READY FOR USE!! For sale is a powerful Falch TrailJet high-pressure trailer with hot water function – ideal for professional industrial, cleaning, and restoration applications. Suitable for cleaning surfaces, pipes, industrial facilities, etc. Technical Specifications Model: Falch TrailJet 30 500-30-100-d Working pressure: up to 500 bar Water flow rate: 30 l/min Temperature: up to 100 °C (hot water) Engine: Diesel engine Registration documents: fully available Equipment Lodjxt Rhispfx Ahvori Trailer box (enclosed system, mobile & road-approved) Radio remote control Easydriver Active 2.8 manoeuvring system (Reich, year of manufacture 2021) Service will be performed prior to handover Condition Machine has been regularly maintained Fully functional, ready for immediate use Normal, age-related signs of wear Inspection and test run possible by appointment. Sale to commercial buyers (B2B) only.

Condition: good (used), Year of construction: 2007, sheet width 1350 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 35 Hub/min cutting angle 2.0 Grad table height 945 mm distance between columns 1361 mm Control CIDAN / SIEMENS engine output 5.5 kW weight of the machine ca. 1400 kg Lrjdpfjyuzcujx Ahvoi range L-W-H 2200 x 2000 x 1550 mm Features: - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction - compact and clear machine construction - NC electro-motorized backgauge, with digital display * Target / actual value stop value input * stepless adjustment over the entire travel range - 1x hold-down bar - 1x material side stop - recessed grips in the front support table - Manual cutting gap adjustment from the front - Rear sheet holding device for thin sheets - 1x freely movable foot switch - Operating instructions (PDF)

Condition: ready for operation (used), sheet width 1540 mm plate thickness 5.00 mm pre-bending 4.25 - 6.00 mm diameter of upper rolls 150 mm Lrodpfeyuzcbjx Ahvji voltage 400 V total power requirement 4.0 kW weight of the machine ca. 1630 kg range L-W-H 2520 x 890 x 1070 mm Features: - Robust electric three-roll bending machine - Drive via spur gear brake motor + reduction gear - Asymmetrical roll arrangement - Electric adjustment of the rear roll * with automatic/electric shut-off * Minimum/maximum travel adjustment possible - Rotating control panel - Swiveling upper roll - Conical bends by tilting the lower and rear rolls - 1x freely movable double foot switch * Right/left rotation of the rolls - Manual adjustment of the lower roll via handwheel - With analog position indicator - Electric safety device (cable) - Original operating instructions * Further technical data for steel 400 N/mm²: - 1.5 x upper roll diameter with bending .. 4.25 mm - 1.5 x upper roll diameter without bending .. 5.00 mm - 5 x upper roll diameter with Bending angle .. 6.00 mm

Condition: new, Year of construction: 2024, neu 2024 9738 prompt, Zwischenverkauf v Türkei 20300 € 389.76 € 1 1530 mm 6 mm 6 mm 4 mm 150 mm 4 kW 3100 mm 1120 mm Lrjdpfewirulox Ahvei 1020 mm 2100 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo)

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Ledpfx Ahjyuty Sjveri Workpiece support Handle hole motor Faceplate motor Lubrication system Extraction connection D 80/100 mm Space requirements approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Storage location: at customer's site Sale as is, as inspected, without guarantee or warranty

Condition: good (used), We offer you: Ljdeyvqfvepfx Ahvsri 6 pallet units for DMC 80 U Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in technical data and details, as well as prior sale!

Condition: used, functionality: fully functional, actuation type: hydraulic, roller (top) diameter: 420 mm, sheet thickness (max.): 25 mm, Hydraulic cylinder Brand: Casanova Bending length: 3,100 mm Maximum bending thickness: 25 mm Top roller diameter: 420 mm Lredpfx Aheydk D Hjvoi The side rollers are raised parallel, without inclination. New control and command panel, installed and modified in 2003. Equipped with hydraulic flag and hydraulic side table. Pit dimensions: - 200x6800 mm - 555 mm depth

Condition: used, Diameter: 630 mm Height: 170 mm Dividing head base on table: 690 mm Taper: Morse 5 / 65 mm Admissible weight: 550 kg Dividing head weight: 302 kg Lrsdpfxew H Rmzs Ahvei

Condition: like new (used), machine/vehicle number: 22-01050762, functionality: fully functional, Used divider plate Brand: Meca-Divimek 160mm 3-jaw chuck It has a point. Brake torque: 30kg Servomotor: 2000 rpm Weight: 70kg Maximum load admitted horizontally: 150kg Lrsdpfx Asr Epa Ijhvsi Vertical position at 200mm: 75kg (With counter-point: 150kg) Servo drive used Brand: Fagor Automation Model: ACS-10 S/N: 22-01050762

Condition: excellent (used), For sale: professional granite surface plate (marking-out plate) used in quality control and tool rooms. The plate is made of high-quality technical granite, ensuring excellent dimensional stability and wear resistance. Ideal for precise measurements, marking out, and component inspection. The unit is mounted on a robust steel stand. The equipment comes from an industrial facility. ⸻ Technical specifications • Type: surface plate / marking-out plate • Material: technical granite Lrsdpfx Aheyuqtpjvei • Plate dimensions: approx. 1600 × 1000 mm • Thickness: approx. 200 mm • Weight: approx. 1014 kg • Base: steel construction The plate has a Trescal calibration sticker. ⸻ Applications • quality control • tool rooms • CNC industry • precision measurements • marking out components

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 110 mm, roller (top) diameter: 110 mm, side roll diameter: 110 mm, roller length: 1,070 mm, sheet thickness steel (max.): 4 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, – Capacity 1070 x 4 mm – Electrically adjustable rear roll – Digital display for rear roll movement – Hardened rolls Lredpfxsyv R T Te Ahvsi – Conical rolling – Swing-out upper roll – Brake motor – Emergency stop – Documentation – 400V

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 110 mm, roller (top) diameter: 110 mm, side roll diameter: 110 mm, roller diameter: 110 mm, roller length: 1,270 mm, sheet thickness steel (max.): 4 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, – Capacity 1270 x 4 mm – Electrically adjustable rear roll – Digital display for rear roll movement – Hardened rolls – Conical rolling – Swing-out upper roll – Brake motor – Emergency stop Lrsdpoyv R Tajfx Ahvei – Documentation – 400V

Condition: used, sheet width 2500 mm plate thickness 3,0 mm distance between columns 2550 mm back stop - adjustable max. 510 mm weight of the machine ca. 1,8 t dimensions 3,3 x 1,4 x 1,8 m Lrodpfxjyv I H Ds Ahvoi