Used Plate Bearing for sale (15,094)

Condition: good (used), Intermediate plate for column jib crane, crane foundation plate, overhead crane, workstation crane, crane foundation plate -Column jib crane: Intermediate plate/base plate, outer diameter: Ø 1050 mm -Thickness: 50 mm -Bolt circle inside: Ø 530 mm / M thread -Outer bolt circle: Ø 1410 -Empty weight: 676 kg Fedpsv Nidrjfx Afnepb

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm down holder 14 Stück no. of strokes max. 11 Hub/min cutting angle 1°15 work height max. 770 mm column arm ? mm oil volume 300 ltr. control konv. total power requirement 15.0 kW weight 11800 kg range L-W-H 4255 x 2250 x 2400 mm Features: Fsdpjx Ni D Rjfx Afnjpb - Robust electro-hydraulic swing pruning shears - Operation, swivels to the front left - Electro-motorized backgauge * on recirculating ball screws * Movement by push-button (forwards backwards) * including ELGO digital position indicator - Manual quick cutting gap adjustment * by eccentric (right side stand) - Machine stand with overhang - 1x long side stop, with mm scale - 2x front support arms, with mm scale - Ball rollers in the front support table - Hinged front finger guard - 1x free-moving foot switch - Rear safety device (protective grille) - 2x front emergency stop button - Operating instructions (PDF)

Condition: good (used), Year of construction: 1990, Type RHM III 120 v-1000 Roll diameter: 120 mm Working length: 1000 mm Fjdpfx Afsx Niu Njnopb Sheet thickness: up to 5.0 mm 400 Volt Kramer Maschinenbau GmbH Description The features described for the RH II series also apply to the RHM III series. These round bending machines are designed for continuous operation under maximum load. The lower shaft is adjustable via a worm gear. For models RHM III 90 – RHM III 130, the geared brake motor is flange-mounted on the outside, while models RHM III 140 to RHM III 180 are equipped with an internally flange-mounted geared brake motor. All motorized machines come standard with electrical safety control. Operation for forward and reverse is carried out using a double footswitch. Additional features on type RHM III: ▪ Powerful thermally protected geared brake motor ▪ Electrical safety control ▪ Convenient double footswitch for forward/reverse ▪ Three-shaft drive (particularly recommended for thin sheet work) ▪ Drive system with two operating speeds ▪ Overload protection via slipping clutch ▪ Motorized rear shaft adjustment ▪ Motorized lower shaft adjustment Standard equipment: ▪ Gear side drive ▪ Three-shaft construction ▪ Asymmetrical shaft arrangement ▪ Upper shaft can be swung out to the front ▪ Adjustment of lower and rear shafts via handwheel ▪ Conical bending by tilting the lower and rear shafts ▪ Initial bending capacity equals round bending capacity Optional equipment: ▪ Device for conical rolling ▪ Upper shaft with grooved edge ▪ Lower and rear shafts with wire groove ▪ Surface-hardened shafts ▪ Ground shafts

Condition: like new (used), Year of construction: 2015, travel distance X-axis: 14,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,200 mm, Column stroke  Head stroke SKODA HCW 1 – 150 NC horizontal boring machine X-axis ..... 14,000 mm Y-axis ..... 5,000 mm  Ram ejection stroke Z-axis ..... 1,200 mm  Spindle ejection stroke W-axis ..... 1,000 mm  Ram ejection stroke Z+W axis ..... 2,200 mm Headstock  Spindle diameter ..... 150 mm  Spindle centering diameter ..... 235 mm  Spindle clamping cone ..... ISO 50  Ram square section ..... 400x400 mm  Speeds, variable in 3 gears ..... 1-3,000 rpm  Maximum torque ..... 7,000 Nm  Main motor power ..... 71 kW Fsdpfx Aew I Sbzofnepb Feeds  X, Y feed rate ..... 0.5-20,000 m/min  Z, W feed rate ..... 0.5-15,000 m/min  Maximum power on the X, Y, and Z axes ..... 35,000 N  Maximum power on the spindle W ..... 30,000 N Busbar width  At the base ..... 1,650 mm  At the column ..... 1,250 mm T390 Rotary and traverse worktable, type SKODA TDV 70 L (2 tables)  The rotary table has a sliding saddle and a swivel clamping plate and its own hydraulic equipment. The table is mounted on the foundation. Two of its axes are numerically controlled by the machine tool's NC control system, and all these functions are controlled by the machine tool's work control panel, and the power supply is brought from the machine tool's control cabinet. Technical Data: Strokes  V-axis, table longitudinal ..... 2,500 mm  B-axis, table rotation ..... 360 degrees  B-axis increments ..... 0.0001 degrees Table plate  Table surface size ..... 4,000 x 4,000 mm  T-slots according to DIN 650 ..... 160 mm  Center load ..... Max. 70,000 kg  Support ring diameter ..... Max. 2,460 mm Beam width ..... 2,350 mm Overall height ..... Approx. 1,200 mm Table unit weight (without workpiece) ..... Approx. 28,000 kg

Condition: used, This listing is for a Microm EC 350-2 Cryoconsole. The unit is in full working condition and is ready for immediate release. The Microm EC 350-2 cryoconsole is an essential tool for laboratories focused on histology and sample preparation, particularly when working with paraffin-embedded samples. Its advanced design and functionality ensure reliable performance for optimal results. Key Features: Large Cooling Plate: The EC 350-2 is equipped with a spacious cooling plate specifically designed for the solidification and maintenance of samples in paraffin. This feature ensures that samples are uniformly cooled, which is critical for preserving sample integrity. Adjustable Temperature Range: Users can easily set the temperature between 0 and -15ºC, allowing for precise control based on specific sample requirements. This flexibility is crucial for various protocols that may necessitate different cooling conditions. Microprocessor Control: The operations of the cryoconsole are managed through a microprocessor integrated into the paraffin dispenser, ensuring accurate temperature management. This technology helps maintain consistent conditions, minimizing the risk of temperature fluctuations that could affect sample quality. Independent Operation: The EC 350-2 can operate efficiently at its maximum performance of -15ºC without requiring any adjustments. This feature makes it a dependable choice for laboratories that demand stability and reliability in their sample processing. Applications: Fjdpfjxxyf Ujx Afnspb The Microm EC 350-2 is ideal for: Histology Laboratories: Perfect for preparing tissue samples for sectioning, ensuring that paraffin solidifies correctly for optimal slicing. Research Settings: Supports various experimental protocols requiring precise temperature control during sample preparation.

Year of construction: 2022, condition: used, The panel swivel fix facilitates handling when moving panels from a vertical to a horizontal position. The support frame is hydraulically height-adjustable and also pivots. Support rollers facilitate horizontal movement. Four swivel casters ensure safe movement. Technical data: Support height: • Vertical approx. 340-120 mm • Horizontal approx. 1200-890 mm Max. panel size: 5200 x 2100 mm Load capacity: 250 kg Fpjdpfx Asv T Ilvsfnjb Storage location: Bad Wimpfen

Condition: excellent (used), For sale – Alfa Laval plate heat exchanger An Alfa Laval plate heat exchanger is offered for sale. This is professional industrial equipment, previously used in food processing production. Specifications: Manufacturer: Alfa Laval Type: Plate heat exchanger Fpedex Rcdgspfx Afneb Designed for milk and other liquid food products Stainless steel plates (food-grade standard) High heat transfer efficiency Dismountable for easy cleaning Suitable for CIP systems Condition: Removed from active production Regularly maintained Fully functional and ready for operation Price: €2,000

Condition: new, Costar 3610 Assay Plate, 96 Well, With Lid 1 box/48 pcs exp. 2026.10.25 Fedpfx Aovwg I Dofnjpb

Condition: good (used), The scope of delivery includes: 01x steel staircase Material color: yellow Floor height: approx. 2,000 mm Projection: approx. 2,550 mm Total width: approx. 1,225 mm Chest profile: 180 x 8 mm Railing: both sides, galvanized Handrail and knee rail round tube Fjdpfxovnr Rre Afnepb Steps: tear plate, galvanized Step dimensions: 1,210 x 270 mm Number of steps: 10 steps Step height: approx. 175 mm Total length of the staircase: approx. 3,700 mm End stop: L-profile: 65 x 110 mm The end stop of the steel staircase is attached with 2 screws per side Drill hole diameter: approx. 16 mm Note: The steel staircases were partially assembled and partially unassembled. The pictures are intended to illustrate the material. The steel stairs are commissioned unassembled. This is a used item, it may have scratches, dents and signs of use. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, ROUNDO PAS-360 bending machine 4 roller bending machine CNC control ROUNDO WCN Max. width of rolled sheet metal 2500 mm, thickness 20 mm / in the attachment is a graph of pre-bending and rolling parameters/ Upper roller diameter 450 mm Number of rolls 4 pcs Possibility of creating and saving a rolling program for serial production Hydraulic roller drive Hardened rollers against abrasion Fodpfx Aox H S Exjfnspb

Condition: used, This listing is for a Star Lab C1000-STR-230EU Plate Centrifuge. The unit is in full working condition and is ready for immediate release. The plate centrifuge makes the safe and quick spin down of droplets and condensation very easy. Sealed plates are loaded vertically and surface tension keeps samples in place so there is no danger of spilling samples. The centrifuge accepts all plates up to 25 mm high. An optional adaptor is available for centrifuging 48-well PCR plates and 0.2 ml PCR tubes or strips. Less than quarter the size of most plate centrifuges Accommodates two plates Rapid start to stop Use before and after thermal cycling to increase PCR yield Accepts skirted, semi-skirted and non-skirted plates Easy cleaning and maintenance Rotor capacity: Two plates, any style, up to 25 mm high Fedpoxx Aqtsfx Afnjpb Power supply: 230 V, 50/60 Hz Permissible Relative Humidity: < 85% Dimensions (W × D × H) 190 mm × 210 mm × 193 mm

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 62 kg, total height: 48 mm, total length: 1,000 mm, total width: 500 mm, Item Description: WITTE Grid Vacuum Plate 1000x500x48 NEW 07/2021 Art. 293885 ----- Condition of the Item: The unit comes from a company liquidation and was acquired by the previous owner but has never been put into operation. The original purchase price in 2021 was €6,000.00 net. Fpsdpfx Aoxvb Skjfnjb Internal number: H41 Sale and shipping only within Europe.

Condition: good (used), Plummer block housings, plummer block housings, plummer block bearing blocks, plummer block housing units, plummer block housing units, vertical plain bearings, plummer block bearings, tension bearing units, tension head -Manufacturer: PTI, Tension bearing unit type T205 -Balance: HC205-GE25KRRB -Bore diameter: 25 mm -Number: 31x clamping bearing units available -Price: per piece Fodpfsx I D S Tex Afnepb -Dimensions: 250/130/H35 mm -Weight: 1.8 kg

Condition: new, Year of construction: 2024, Hydraulic H Frame Press with movable Plate Capacity: 400 Ton Controll : by 2 Hand Bottom Main Cylinder : Ø 430mm. Auxilitary Cylinder : 2 pcs. Ø 110 x 55mm. Main Motor : 37kw. - 75hp. ( IE-3 ) Pumpe : 140cc. - 204LT BOSCH/REXROTH Speed: Down-140mm/sec. Working Speed13 - 5mm/sec Upspeed:150mm/sec Fjdpfspl Ugzex Afnjpb Daylight : 1000mm Stroke: 700mm Movable Plate: 1500x1000mm Upper Plate : 1500x1000 Hydraulic: All the Hydraulic System will be top of the Machine Hydraulic System : BOSCH/REXROH Pressure & Speed Adjustment Side Cover doors Hydraulic Top Plate Lock system Mechanic Top Plate Lock System Automatic Lubrication System Oli Capacity : 1100 Lt Controller: Controller: SIEMENS S/7-1200 Electric Cabinet ( CE) Portable Control Panel Remote Connection System Security PLC Soft Starter Light Curtains on Front & Back Side Movable 2 Hand Control PLC Touch Screen: SIEMENS 12'' Working Area Ilimination 8 pcs free IN & OUT put-on PLC Movable Table: Stroke of the Movable Plate:1200mm Hydraulic Movement with external Motor and Pump Support Sliding System Table Paralelity: 0,05mm/ per m² All the Capacity,Dimentions and Options can be offered according to Customer Requirements Pls Contact us more Informations.

Condition: good (used), Scope of delivery includes: 01x Steel staircase Material color: yellow Floor height: approx. 1,890 mm Projection: approx. 2,650 mm Fsdpfovntb Sjx Afnepb Total width: approx. 1,208 mm Stringer profile: 200 x 5 mm Railings: on both sides Handrail and knee rail: rectangular tubing Steps: smooth Step dimensions: 1,108 x 250 mm Number of steps: 11 steps Riser height: approx. 180 mm Overall stair length: approx. 3,320 mm End stop: L-profile: 100 x 55 mm Note: The steel staircases are partially assembled and partially unassembled. The images are for material illustration purposes only. The steel staircases are picked and shipped unassembled. This is a used item; scratches, dents, and signs of use may be present. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, this is subject to additional costs which can be requested from us depending on the delivery location and scope of delivery.

Condition: like new (used), Year of construction: 2014, RICO HG 310 MATIC CNC hydraulic guillotine shears of Portuguese manufacture. Machine in perfect technical condition, very little used ( worked 970 hours ), original paint. Fpedpfx Aelvtfyefneb YEAR OF CONSTRUCTION 2014 CONTROL DELEM DAC 360 Machine connected possibility of checking "on the move." BASIC TECHNICAL DATA: - max. thickness of cut sheet metal 10 mm - max, length of cut sheet metal 3000 mm - cutting angle change ( automatic ) 2,0 - 1,0 mm - change of cutting length ( automatic ) - change of cutting gap ( automatic ) - overall dimensions of the machine l. h. w. 3620 x 1950 x 2620 mm - machine weight 8 700 kg

Condition: used, This listing is for a Sakura Tissue-Tek Tec 5 CM E-2 Cold Plate Fpjdpfx Afjxzgzbenob

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate Fedpstp Rfhsfx Afnspb -Mounting plate: with dovetail guide -Clamping surface: 1955 x 1040 mm -Height: 110 mm -Dovetail: 27 to 45 mm / 35 mm high -Pin opening: 47 x 47 mm -Quantity: 2x mounting plates available Price: per piece -Transport dimensions: 1955/1040/H110 mm -Weight: 1288 kg

Condition: good (used), The scope of delivery includes: 01x steel staircase Material color: yellow Fpjdpfjvntmnsx Afnob Floor height: approx. 1,9450 mm Projection: approx. 2,645 mm Total width: approx. 1,220 mm Chest profile: 180 x 8 mm Railing: both sides, galvanized Handrail and knee rail round tube Steps: tear plate, galvanized Step dimensions: 1,204 x 270 mm Number of steps: 10 steps Step height: approx. 190 mm Total length of the stairs: approx. 3,320 mm End stop: L-profile: 85 x 85 mm The end stop of the steel stairs is attached with 2 screws per side Drill hole diameter: approx. 16 mm Note: The steel stairs were partially assembled and partially unassembled. The pictures are intended to illustrate the material. The steel stairs are commissioned unassembled. This is a used item, it may have scratches, dents and signs of use. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: used, This listing is for the Biotek ELx808 Plate reader The unit is in full working condition and is ready for immediate use The BioTek ELx808 is a multi-channel absorbance microplate reader designed for high-precision optical density measurements in 96-well format microplates. Functioning essentially as a microplate-format spectrophotometer, the ELx808 measures light intensity as a function of wavelength—allowing for precise quantification in applications such as ELISA, endotoxin testing, enzyme kinetics, and microbial growth. This model is suitable for both research and development as well as diagnostic use, and is frequently employed across multiple disciplines including biology, chemistry, and nanotechnology. However, unlike some other microplate readers on the market, the ELx808 is specifically engineered for 96-well plates only and does not accommodate a broad range of labware. Fjdpfx Ajxhftvjfnopb

Condition: new, The scope of delivery includes: 25x new leveling plates Suitable for manufacturer: Mecalux Material color: Sendzimir galvanized Fpjdpfx Afswa Npzonjb For frame profile: P 101 Material thickness: 1.00 mm Total width: 155 mm Total depth: 110 mm Hole diameter: 15 mm Number of holes: 2 Weight | Unit: 0.130 kg Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: new, The scope of delivery includes: 01x shim, new Manufacturer: Stow Material color: sendzimir galvanized Total width: approx. 120 mm Total depth: approx. 140 mm Material thickness: 1 mm Fpedpfxetdb T Eo Afnob Weight: approx. 0.125 kg | pc. Currently available in stock: approx. 2,500 pcs. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Technical data for the locking bracket: Manufacturer: SSI Schäfer Included in delivery: 01x locking angle, used Material color: sendzimir galvanized leg ,,A" approx. 35 mm leg ,,B" approx. 53 mm (contact surface see description) incl. distance block (grey) inner dimension ,,C" approx. 22 mm material thickness: approx. 2,00 mm Weight / pcs.: approx. 0,120 kg Remark: Due to the included the Z-bracket can be used for various truss widths crosshead widths from 40 - 60 mm! Brief overview / range of application: - Without block for truss width 60 mm (e.g. for INP) - With block (small side inside) for truss width: 50 mm (INP or box profile) - With block (large side inside) for crosshead width: 40 mm (INP or box profile) General information about the article: Fjdpfx Afspgndgjnspb This item is offered for pickup only. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: 01x printing plate, used Material color: blue Dimensions: approx. 200 x 95 mm Material thickness: approx. 5 mm Number of drill holes: 02 pcs. Drill hole Ø: approx. 15 mm Weight per piece: 0.750 kg Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Fpedjt N T A Uspfx Afnsb General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: new, The scope of delivery includes: 01x shim, new Manufacturer: Stow Material color: sendzimir galvanized Total width: approx. 120 mm Total depth: approx. 140 mm Material thickness: 3 mm Weight: approx. 0.38 kg | pc. Currently available in stock: approx. 2,610 pcs. Fpodetda Sdjpfx Afnob Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.