Used Plastering Machine for sale (83,992)

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, workpiece length (max.): 2,500 mm, workpiece width (max.): 700 mm, rotational speed (max.): 2,800 rpm, TECHNICAL DETAILS Pedpfx Asxw U Arodnjrd Minimum panel length: 170 mm Maximum panel length: 2,500 mm Minimum panel width: 50 mm Maximum panel width: 700 mm Drilling head positioning: NC Spindles for vertical drilling: 40 Spindles for horizontal drilling in "Y" direction: 6 Motor power: 3 kW Max. speed: 2,800 rpm Spindles for vertical drilling: 4+4 Motor power: 2.2 kW Max. speed: 2,780 rpm MACHINE DETAILS Number of injectors: 2 Number of storage tanks: 2 EQUIPMENT Control system: WINDOWS Wooden dowels Ø8 Note: Tools are not included in the offer.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, laser source model: TruFlow 4000, table length: 3,000 mm, table width: 1,500 mm, workpiece weight (max.): 900 kg, TRUMPF laser cutting machine with LiftMaster! TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Accuracy Smallest programmable increment: 0.001 mm Position deviation Pa: ±0.1 mm Mean position scatter Ps: ±0.03 mm Workpiece Maximum workpiece weight: 900 kg Prsdpfx Adexwn S Honjd Maximum speeds Parallel to axis: 100 m/min Simultaneous, approx.: 140 m/min MACHINE DETAILS Laser: TruFlow 4000 Controller: Siemens Machine weight: 13,000 kg EQUIPMENT LiftMaster

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 12,000 rpm, controller model: Heidenhain iTNC530 mit Handrad, Machine with 4th axis as a swivel axis & regularly serviced by the machine manufacturer! TECHNICAL DETAILS Working areas X-axis: 3,000 mm Y-axis: 6,000 mm Z-axis: 1,250 mm Milling head A-axis: controllable, tiltable Milling spindle Spindle power: 4.4 kW Spindle speed: 12,000 rpm Tool holder: 78/8 flange Tool clamping: manual with clamping nut Linear axis drives Feed rate X, Y, Z axes: up to 20 m/min Axis acceleration X, Y, Z axes: up to 1.5 m/s² MACHINE DETAILS Control: Heidenhain iTNC530 with handwheel Connected load: approx. 25 kW Main fuse: 42 A Dimensions & Weight Space requirement for machine: approx. 5,500 x 9,000 x 4,500 mm Prjdpexvx U Aofx Adnsd Total weight: 9,600 kg FEATURES Conversion to high-frequency spindle possible Important: Table and the wooden board shown in the photos are not included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 87,310 h, functionality: fully functional, grinding wheel width: 400 mm, grinding wheel diameter: 600 mm, grinding diameter: 220 mm, overall weight: 13,000 kg, TECHNICAL DETAILS Maximum grinding diameter: 220 mm Regulating wheel width: 400 mm Maximum grinding wheel width: 400 mm Grinding wheel drive: 55 kW Maximum circumferential speed: 45 m/s Regulating wheel dimensions: 350 x 400 x 203 mm CBN grinding wheel dimensions: 500 x 400 x 304 mm Aluminum oxide grinding wheel dimensions: 600 x 400 x 304 mm Grinding spindle headstock Total stroke of grinding spindle headstock: 130 mm Speed of grinding spindle headstock: 150 m/min Rapid traverse adjustment max.: 150 m/min Minimum infeed of grinding spindle headstock: 0.0005 mm Preselectable infeed size of grinding spindle headstock: 0.0005–0.05 mm Prsdpfsxvxhcox Adnjd Grinding wheel dresser Dresser support speed: 15–900 m/min Maximum stroke of dresser supports: 430 mm MACHINE DETAILS Overall power requirement: 75 kVA Dimensions & Weight Space requirement approx.: 4.47 x 2.77 x 2.49 m Machine weight approx.: 13 t Operating hours: 87,310 h

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, operating hours: 1,990 h, laser power: 12,000 W, sheet thickness steel (max.): 30 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,580 mm, travel distance Z-axis: 100 mm, Bystronic ByStar Fiber 3015 Dynamic Edition F12000 from year of manufacture 2023 with only 1,990 cutting hours! Original purchase price of the machine was approximately 870,000 EUR! TECHNICAL DETAILS Travel X-axis travel: 3,100 mm Y-axis travel: 1,580 mm Z-axis travel: 100 mm Maximum Sheet Thicknesses Steel: 30 mm Psdexxklfopfx Adnjrd Stainless steel: 30 mm Aluminum: 30 mm Brass: 15 mm Copper: 12 mm Positioning Speed Maximum positioning speed (X/Y axis): 120 m/min Maximum simultaneous positioning speed: 170 m/min Positioning Accuracy Bilateral repeatability of axis R: 0.025 mm Average bilateral positioning deviation of axis M: 0.05 mm Edge detection accuracy: ± 0.5 mm Workpiece Weight Maximum single workpiece weight: 1,100 kg Maximum workpiece weight on both shuttle tables: 1,850 kg Changeover Time Shuttle table change time: 25 s MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,150 x 6,000 x 3,200 mm Machine weight: 11,000 kg Laser Source Laser source: Fiber 12000 Power: 12,000 W Adjustable range: 1,200–12,000 W Wavelength: fiber Consumption Total power consumption (incl. exhaust, chiller): 27 kW Operating Hours Cutting hours: 1,990 h Power-on hours: 13,428 h EQUIPMENT Detection Eye BeamShaper NCT & KerfScan Second high-pressure cutting gas channel Prepared for N2 generator Dust extraction system for internal installation Electrical cabinet position: top (mezzanine structure not included in scope of delivery) Note: The machine has already been dismantled, is stored, and is no longer under power.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,400 h, laser power: 6,000 W, laser wavelength: 1,070 nm, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,540 mm, travel distance Z-axis: 120 mm, The machine's cutting head was overhauled by the manufacturer 9 months ago! TECHNICAL DETAILS Travel range X-axis: 3060 mm Travel range Y-axis: 1540 mm Travel range Z-axis: 120 mm Laser power: 6,000 W Laser wavelength: 1,070 nm Working area: 3,000 x 1,500 mm Positioning speed: 350 m/min Maximum cutting speed (parallel to X-, Y-, Z-axis): 150 m/min Positioning: 280 m/min Acceleration: 60 m/s² Minimum programmable increment: 0.001 mm/m Repeatability: 0.03 mm/m Cutting accuracy: 0.05 mm/m MACHINE DETAILS Control type: CNC control Laser source model: IPG YLS-6000 Dimensions & Weight Dimensions (L x W x H): 1,000 x 3,080 x 3,060 mm Weight of cutting system: 18,000 kg Air pressure: 6 bar Nitrogen pressure: N₂ 25 bar Oxygen pressure: O₂ 10 bar Control voltage: 24 V Power requirement: 54 kVA Main power supply: 400 V / 50 Hz Operating hours Beam emission time: approx. 4,400 h Laser activation time: 19,855 h EQUIPMENT CE marking Chiller unit Emergency stop switch Safety light curtain Central lubrication system Linear motors on all axes Carbon traverse (crossbeam) Psdpfjxxih Esx Adnord Composite body Pallet changer Various nozzles Protective lenses

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, workpiece width (max.): 1,300 mm, workpiece length (max.): 3,200 mm, Equipment: CE marking, TECHNICAL DETAILS Max. feed speed: 24 m/min Maximum panel thickness: 60 mm Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 320 mm Maximum panel length: 3,200 mm Minimum panel width: 150 mm Maximum panel width: 1,300 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Number of working units: 8 UNITS Trimming Unit 1 Function: Sizing Model: RT30 Motor Power: 3.5 kW Max. speed: 9,000 rpm Edge Processing Unit 1 Function: End Trimming Model: IT90-S Number of motors: 2 Max. processing speed: 28 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Function: Edge Milling Model: RF10 Number of motors: 2 Motor power: 1 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Function: Multifunction Model: AR30 Number of motors: 2 Max. processing speed: 18 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Function: Profile Scraper Model: RB40 Edge Processing Unit 5 Function: Glue Scraper Model: RC20 Edge Processing Unit 6 Function: Brushing Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Max. speed: 1,400 rpm MACHINE DETAILS Installed total power: 25 kW Dimensions Conveyor length: 12,300 mm Width: 1,300 mm Length: 12,300 mm EQUIPMENT Jointing cutters Multifunction unit Predpjxw T Tpefx Adnod Top pressure Pressure via rubberised belts Panel support guide NC positioning Angled panel infeed system Automatic engagement by time Edge preheating lamps Coil magazine Hot-melt glue pot Hot-melt glue pre-fuser Edge pressure roller conveyor Spray unit SINTRA machine programming software Panel discharge via roller transfer conveyor Panel feed via motorised carpet belt Return system for left-side edge bander CE marking

Condition: ready for operation (used), functionality: fully functional, feed length X-axis: 1,015 mm, feed length Y-axis: 600 mm, drilling capacity: 40 mm, spindle speed (max.): 2,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Drill holder mount: MK 4 Drilling capacity: 40 mm Table size: 1,445 mm x 810 mm X-axis: 1,015 mm Y-axis: 600 mm Spindle speed: 2,000 rpm MACHINE DETAILS Space required (LxWxH): 0.82 m x 2.01 m x 2.5 m Machine weight: 2,815 kg Pjdpfsxwcyfsx Adnord

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, workpiece height (max.): 10 mm, operating speed: 50 mm/s, TECHNICAL DETAILS Minimum processing size: 100 mm x 400 mm Processing thickness: 2 - 10 mm Maximum speed: 3 m/min MACHINE DETAILS Power: 45 kW DIMENSIONS Prjdexurtiopfx Adnjd Dimensions of the enclosure (L x W x H): 6,260 x 1,280 x 1,750 mm Dimensions of the control cabinet: 1,000 x 480 mm

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, workpiece weight (max.): 2,500 kg, travel distance X-axis: 1,550 mm, travel distance Y-axis: 1,040 mm, travel distance Z-axis: 500 mm, empty load weight: 15,100 kg, Submitting a bid obliges you to collect the item on time on 15.12.2025! The original price of the machine was EUR 337,000! TECHNICAL DETAILS Travel X-axis: 1,550 mm Travel Y-axis: 1,040 mm Travel Z-axis: 500 mm Travel U-axis: 500 mm Travel V-axis: 500 mm Max. workpiece size: 1,800 x 1,250 x 500 mm Max. workpiece weight: 2.5 t MACHINE DETAILS Dimensions & Weight Machine dimensions: 5,300 x 4,440 x 3,180 mm Machine weight: 15.1 t Prsdpfxoxy Rzvs Adnod

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, working width: 3,200 mm, sheet thickness (max.): 3 mm, empty load weight: 4,400 kg, TECHNICAL DETAILS Sheet width: 3,200 mm Sheet thickness: 3 mm Opening width of the upper beam: 300 mm MACHINE DETAILS Prodpsxyv Iusfx Adnjd Motor power: 4.5 kW Dimensions & Weight Space requirements: approx. 4,300 x 2,300 x 1,750 mm Machine weight: approx. 4,400 kg EQUIPMENT Segmented pointed rail Segmented gooseneck tool

Condition: ready for operation (used), Year of construction: 2008, operating hours: 16,722 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 4,200 rpm, controller model: Heidenhain iTNC 530, Submission of a bid obligates the buyer to collect the machine by the end of this year! TECHNICAL DETAILS Travel X: 4,000 mm Travel Y: 1,200 mm Travel Z: 1,000 mm Maximum spindle speed: 4,200 rpm Tool holder: SK50 DIN 69871 Table load capacity: 10,000 kg MACHINE DETAILS Control system: Heidenhain iTNC 530 Operating hours Prjdpfx Ajxx Uayodnsd Control unit on-time: 47,181 h Machine on-time: 45,697 h Program running time: 16,722 h EQUIPMENT 45° diagonal milling head with 2.5° indexing Drum-type tool changer with 24 tool positions (vertical tool change) Machine enclosure: front guard with 2 doors Rear guard with additional door Side slats for machining of extra-long workpieces Longitudinal chip conveyor (discharge on right-hand side) Control cabinet air conditioning Swivel arm for machine control (operation from front and rear)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, rotational speed (max.): 10,960 rpm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum panel thickness: 50 mm Minimum panel height: 8 mm Maximum panel height: 50 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Number of positions: 1 Unit 1 Unit: End trimming Number of motors: 2 Automatic engagement by time: yes Motor power: 0.18 kW Speed: 10,800 rpm Unit 2 Unit: Edge milling Number of motors: 2 Automatic engagement by time: yes Motor power: 0.27 kW Speed: 10,960 rpm Unit 3 Unit: Edge scraper Prjdoxw Tugopfx Adned Control system: BFS MACHINE DETAILS Installed total power: 4 kW EQUIPMENT Upper pressure Pressure by spring-loaded rollers Panel support guide Magazine for the coil EVA glue system Hot-melt glue pot Edge pressure roller track Number of pressure rollers: 3 CE marking

Year of construction: 2012, operating hours: 6,047 h, condition: ready for operation (used), functionality: fully functional, rotational speed (max.): 24,000 rpm, travel speed (max.): 60,000 mm/min, working length: 7,500 mm, machine/vehicle number: 0809-M_001327515, number of slots in tool magazine: 16, number of axes: 14, TECHNICAL DETAILS Number of controlled NC axes: 14 Processing length: 7,500 mm Max. cross-section W x H / length for single bar processing: 400 x 300 mm / 7,500 mm Min. cross-section W x H / length for single bar processing: 30 x 30 mm / 300 mm Maximum steel wall thickness: 5 mm Max. traverse speed X-axis: 60 m/min Max. traverse speed Y-axis: 60 m/min Max. traverse speed Z-axis: 30 m/min Spindle speed range: 1 - 24,000 rpm Milling motor power: 16 kW A-axis rotation: ±110° continuous C-axis rotation: ±220° continuous Tool holder: HSK-F63 Max. tool dimensions mill/drill (d/l): Ø 50 mm / 200 mm Max. tool dimension disc milling cutter (d): Ø 500 mm Number of stations in tool magazine: 16 Number of special tool positions: 2 Automatic positioning of clamping fixtures: Yes Number of clamping fixtures: 10 Profile systems with quick-change system: Yes Max. number of profiles per machine setup: Up to 10 profiles Number of profile punching units: 2 Automatic repositioning of clamps during 2 machining steps: Yes MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 15 x 4 x 5.64 m Weight: 12 t Operating Hours Power-on time: 24,613 h Spindle running time: 6,047 h EQUIPMENT Quick-change system for profile installations Automatic clamping fixture positioning Predpfxjxxiuxj Adnjd 19" TFT color touch display Schüco CAM software Machine operation based on Windows 8 with menu navigation Self-programming without NC/CNC knowledge required

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, number of print heads: 5, delivery head: 950 mm, product height (max.): 19 mm, product length (max.): 1,600 mm, product width (max.): 1,200 mm, Digital printing machine in clean room! TECHNICAL DETAILS Product dimensions Max. product dimensions: 1,600 x 1,200 mm Min. product dimensions: 300 x 300 mm Product thickness: 3–19 mm Conveyor height: 950 mm Printing speed: 80 m²/h MACHINE DETAILS Pjdpfx Adexuhz Ajnjrd Number of print heads: 5 Clean room dimensions External length: 10,500 mm External width: 3,800 mm Internal length: 10,340 mm Internal width: 3,640 mm Weight: 2,500 kg Electrical data Power supply: 400 VAC / 32 A Installed power: 10 kW Compressed air Compressed air connection: 6.0 bar Air consumption: 50 l/min EQUIPMENT 1 infeed conveyor 3 outfeed conveyors

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 11516, workpiece weight (max.): 10,000 kg, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 700 mm, empty load weight: 19,500 kg, Submitting a bid obligates you to collect the machine on time on 15.12.2025! The original purchase price of the machine was EUR 400,000! TECHNICAL DETAILS Travel X–Y: 2,000 x 1,300 mm Travel Z: 700 mm Travel U–V: 500 x 500 mm Maximum workpiece dimensions (X, Y, Z): 2,450 x 2,000 x 700 mm Maximum workpiece weight: 10,000 kg Taper cutting angle 400 mm: ±30°/400 mm Taper cutting angle 600 mm: ±20°/600 mm Position resolution (X, Y, U, V): 0.001 mm Minimum programmable increment: 0.001 mm MACHINE DETAILS Machine weight: 19,500 kg Pjdpexy Rxuefx Adnord

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 6,537 h, laser source model: TruFlow 3200, laser power: 3,200 W, table length: 3,000 mm, table width: 1,500 mm, table height: 2,200 mm, TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Table height: 2,200 mm Laser power: 3,200 W MACHINE DETAILS Control: Siemens Laser model: TruFlow 3200 Podpfsxxt E Usx Adnjrd Dimensions & Weight Dimensions (L x W x H): 9,300 mm x 4,600 mm x 2,200 mm Weight: 12,000 kg Operating hours Beam on: 6,537 h Laser on: 39,930 h

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 9972, total length: 4,500 mm, total width: 2,000 mm, type of input current: three-phase, year of last overhaul: 2020, empty load weight: 3,000 kg, Equipment: documentation/manual, The machine was last overhauled in 2020 at a cost of over EUR 70,000!\n\nMACHINE DETAILS\n\nType of incoming power: Three-phase current\nCompressed air connection: 6 bar\nInput frequency: 50 Hz\n\nDimensions & Weight\nDimensions (L x W x H): 4,500 x 2,000 x 2,200 mm\nTotal weight: 3,000 kg\n\nEQUIPMENT\nDocumentation/Manual Podpfoxximhex Adnord

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, feed rate X-axis: 11 m/min, workpiece height (max.): 40 mm, edge thickness (max.): 6 mm, rotational speed (max.): 12,000 rpm, Equipment: CE marking, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 11 m/min Maximum panel thickness: 40 mm Min. panel height: 8 mm Max. panel height: 40 mm Min. edge thickness: 0.3 mm Max. edge thickness: 6 mm Maximum spindle speed: 12,000 rpm MACHINE DETAILS Prsdpfjxw Ttvex Adnsd Trimming unit Unit: Format cutting Unit: Trimming Automatic engagement by time Motor power: 2.2 kW Edge heating lamps Coil magazine Number of positions: 1 Gluing system Hot melt glue pot Edge pressure roller conveyor Number of pressure rollers: 3 Edge processing unit 1 Unit: End trimming Number of motors: 2 Automatic engagement by time Motor power: 0.18 kW Maximum speed: 12,000 rpm Edge processing unit 2 Unit: Top/bottom trimming Number of motors: 2 Motor power: 0.27 kW Maximum speed: 12,000 rpm Edge processing unit 3 Unit: Multifunction Number of motors: 1 Motor power: 0.35 kW Maximum speed: 12,000 rpm Edge processing unit 4 Unit: Scraper Edge processing unit 5 Unit: Buffing Number of motors: 2 Motor power: 0.1 kW Total installed power: 13 kW EQUIPMENT Control system: PC 16 CE marking

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 1193, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 1,000 mm, workpiece weight (max.): 2,549 kg, repeat accuracy: 0.003 mm, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you commit to collecting the item by 16/01/2026! TECHNICAL DETAILS Maximum permissible workpiece weight: 25,000 N Measuring range X-axis: 1,200 mm Measuring range Y-axis: 1,200 mm Measuring range Z-axis: 1,000 mm Psdpfxoxy Rtrj Adnjrd Measuring resolution: 0.001 mm Straightness of guideways Straightness X-axis max.: 0.010 mm Straightness Y-axis max.: 0.010 mm Straightness Z-axis max.: 0.010 mm Repeatability: 0.003 mm Travel speed: stepless, 4.2 m/min MACHINE DETAILS Dimensions & weight Space requirement (L x W x H): 3,600 x 3,600 x 4,500 mm External dimensions (L x W x H): 2,590 x 2,280 x 4,080 mm Machine weight: 8.5 t

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, throat depth: 1,600 mm, drilling capacity: 62 mm, column diameter: 350 mm, drilling depth: 315 mm, rotational speed (max.): 2,000 rpm, TECHNICAL DETAILS Drilling capacity in steel (diameter): 62 mm Thread cutting in steel (St 60): M46 Thread cutting in grey cast iron (GG 20): M52 Maximum drilling depth: 315 mm Machine table dimensions: 2,400 x 1,000 x 200 mm Throat: 1,600 mm Drill head travel (horizontal): 1,250 mm Arm stroke (vertical): 585 mm Column diameter: 350 mm Prsdpfxjxxrcxj Adnsd Speed range: 38 – 2,000 rpm Spindle taper: MK 5 Feeds: 0.06 – 1 mm/rev MACHINE DETAILS Total power requirement: 5.5 kW Dimensions & Weight Space requirement: approx. 2,490 x 1,050 x 2,780 mm Machine weight: approx. 3,800 kg

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, feed rate X-axis: 11 m/min, edge thickness (max.): 3 mm, plate height: 60 mm, rotational speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum feed speed: 11 m/min Maximum panel thickness: 60 mm Minimum panel height: 8 mm Maximum panel height: 60 mm Minimum panel width: 70 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Number of working units: 5 Predpfjxw Tngex Adnjd Maximum rotation speed: 12,000 rpm MACHINE DETAILS Unit: Pre-trimming unit Unit: Finishing/Adjustment unit Automatic engagement by time: yes Motor power: 2.2 kW Edge pre-heating lamps Coil magazine Number of positions: 1 Adhesive system Glue pot for hot-melt glue Prefuser for hot-melt glue Edge pressure roller track Number of pressure rollers: 3 with NC positioning Edge processing unit 1 Unit: End trimming unit Number of motors: 2 Maximum processing speed: 11 m/min Motor power: 0.18 kW Maximum rotation speed: 12,000 rpm Edge processing unit 2 Unit: Edge milling unit Number of motors: 2 with NC positioning Motor power: 0.55 kW Maximum rotation speed: 12,000 rpm Edge processing unit 3 Unit: Edge scraper Edge processing unit 4 Unit: Glue scraper Total installed power: 13 kW EQUIPMENT Control system: EASY CONTROL EC 10+ CE marking

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, throat depth: 1,600 mm, drilling capacity: 60 mm, spindle speed (max.): 1,450 rpm, spindle stroke: 350 mm, workpiece height (max.): 1,300 mm, TECHNICAL DETAILS Drilling capacity in steel (diameter): 60 mm Arm reach: 1,600 mm Workpiece height – max. approx.: 1,300 mm Reaming diameter in steel: 80 mm Reaming diameter in cast iron: 100 mm Thread cutting in ST 60: M55 mm Spindle speed: 29–1,450 rpm Drill spindle: 100 mm Morse taper: MK5 Pedjxxrbnepfx Adnerd Spindle stroke: 350 mm MACHINE DETAILS Total power requirement: 7.5 kW Dimensions & Weight Space requirements (L x W x H): approx. 2,600 x 1,100 x 3,200 mm Machine weight approx.: 4,600 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, feed rate X-axis: 25 m/min, edge thickness (max.): 3 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool change with NC positioning Pedpfjxw T H Nsx Adnord Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Router Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spraying unit Machine programming software PowerControl PC22 CE marking

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, throat depth: 2,000 mm, drilling capacity: 70 mm, spindle speed (max.): 1,250 rpm, spindle stroke: 330 mm, empty load weight: 5,500 kg, TECHNICAL DETAILS Drilling capacity in steel: 50 mm Drilling capacity in cast iron GG 20: 70 mm Prsdpfx Asxxrakjdned Arm reach: 2,000 mm Morse taper: MK 5 Spindle speed: 28 – 1,250 rpm Spindle stroke: 330 mm MACHINE DETAILS Control: conventional Total power requirement: 8 kW Machine weight: approx. 5,500 kg