Used Planing Machine for sale (64,900)

Condition: used, Year of construction: 2010, working width: 230 mm, spindle diameter: 40 mm, working height: 120 mm, controller model: Siemens Simatic Touch-Panel, working length: 8,483 mm, TECHNICAL DETAILS Minimum working height: 6 mm Maximum working height: 120 mm Minimum working length: 370 mm Maximum working length: 8,483 mm Minimum working width: 25 mm Maximum working width: 230 mm Maximum feed rate: 12 m/min Rubber feed rollers: 1 Toothed feed rollers: 4 Total number of feed rollers: 5 Number of machining units: 4 Lower milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Bdsdpfez Ekkxex Amrjh Right milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Maximum tool diameter: 4 mm Motor power: 4 kW Left milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Upper milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 5.5 kW MACHINE DETAILS Control system: Siemens Simatic Touch Panel Total connected power: 24 kW EQUIPMENT CE-compliant safety design The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7243

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 39.963TW, working height: 1,300 mm, planer shaft diameter: 60 mm, workpiece height (max.): 250 mm, workpiece width (max.): 300 mm, power: 18.5 kW (25.15 HP), A new two-sided planing machine is for sale! TECHNICAL DETAILS Processing: Two-sided planing (calibrating) Thickness tolerance: < ±0.1 mm Workpiece length min./max.: 800 / 3,200 mm Minimum length for continuous feed: 1,250 mm Workpiece width max.: 300 mm Workpiece height min./max.: 20–250 mm (each ±1 mm) Passage height: 280 mm Working height: approx. 1,300 mm Number of spindles: 2 Bdsdpez A Ubijfx Amrsh Spindle diameter: 160 mm Planer shaft diameter: 60 mm Feed speed: 5–20 m/min, continuously adjustable Ram columns: 4 × Ø 110 mm MACHINE DETAILS Input voltage: 3 × 400 V AC Frequency: 50 Hz Network type: TNS, for industrial networks Control voltage: 230 V AC / 24 V DC Power: 18.5 kW Power of feed motor: 9 kW Compressed air connection: 8 bar Electrical equipment: Télémecanique / MOELLER / SIEMENS Machine color: RAL 7035 Light Grey / RAL 3003 Ruby Red Cabinet color: RAL 7035 Light Grey / RAL 3003 Ruby Red Total weight: 7,000 kg EQUIPMENT Continuously adjustable feed speed Feed rollers individually and directly driven by separate gear motors Electronically synchronized feed rollers Grooved feed rollers in front of the planer shafts Smooth feed rollers at the outlet Hard-chrome-plated tables, feed rollers, pressure elements, and stops Automatic feed deceleration in case of overload Processing motors with electronic soft start controls Integrated DC motor brakes Télémecanique ALTISTART Control panel on a pivoting arm on the front wall of the cabinet

Condition: excellent (used), For sale: Guilliet KXK four-sided planing machine Very well-maintained, from a one-man carpentry shop Year of manufacture: 1995 Max. planing width: 180mm Max. planing height: 120mm Bdjdpfx Amozivf Sersh Length of feed table: 2100mm Tool diameter: 100mm Motor powers: Surfacing cutter: 3.7 KW Right cutter: 3.7 KW Left cutter: 3.7 KW Thicknessing cutter: 3.7 KW Feed motor: 1.0 KW Motor power for height adjustment: 0.37 KW Motorized adjustment of the feed bar with the thicknessing cutter Dust extraction connections: Surfacing and thicknessing: each 160mm Left and right cutters: each 120mm

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, planing height: 300 mm, planing width: 450 mm, overall weight: 5,300 kg, the machine in very good condition, original paint, maximum profile 450mm x 300mm Bdodpfx Ajxk S S Rjmroh

Condition: used, Year of construction: 1991, used Manufacturer: Casadei Type: FS 51 Year of manufacture: 1991 Machine no.: H 5884 Motor: 4 kW Planing width: approx. 510 mm Planing height: approx. 230 mm Table length: approx. 2200 mm Surfacing tables: can be tilted – complete Table lips: slotted Bdjdpfxjz Alb Ao Amrsh Table lips: low-noise Motorized automatic brake Number of knives: 4 Safety knife shaft Table guide rollers: 1 x Feed rate: 8 + 14 m/min Digital display for planing height Electric height adjustment Dust extraction connection: D 140 mm Space requirement: approx. 2200 mm x 1300 mm x 1000 mm Weight: approx. 900 kg Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee

Condition: ready for operation (used), KUPFERMÜHLE DOMA-g-1620-V44 Four-sided planer with constant table height for varying wood thicknesses Working width max. 1620 mm Planing height, 2 sides max. 300 mm Planing height, 4 sides max. 240 mm (OPTION: can be converted to 300 mm) Feed rate in 6 stages 4.5 - 26 m/min Total electrical power 91 kW 4 horizontal planing shafts bottom right 11.0 kW Bsdezlbz Ropfx Amrsdh bottom left 15.0 kW top right 18.5 kW top left 18.5 kW 2 vertical milling units x 7.5 kW with mounted aluminum planing heads H 240 mm Machine mounted on a rotary bearing Wood widths up to 820 mm can be planed with energy efficiency with 1 motor at the bottom + 1 motor at the top good technical condition of the machine with functional guarantee year 1981 last inspection by the manufacturer in 2025

Condition: ready for operation (used), KUPFERMÜHLE – 2-sided Planer K43 Working width max. 420 mm Planing height, 2-sided max. 300 mm Feed rate 15 - 90 m/min Chip removal, lower cutterhead 15 mm Chip removal, upper cutterhead 20 mm Drive motor, lower shaft 15.0 kW Bedpfjzmmrdsx Amredh Drive motor, upper shaft 22.0 kW Drive motor, scoring saw, top 7.5 kW Feed motor 7.5 kW Height adjustment 3.0 kW Total electrical power 55 kW Planer heads, aluminum, each with 8 knives D 200 mm 2 pcs Jointing device, bottom and top Overall length 2960 mm Overall width 1630 mm Table height, constant 800 mm Net weight 5300 kg Year of manufacture 1983 Last maintenance by the manufacturer 2024 Condition good This planer was originally purchased new in 1984 as a 4-sided machine. However, the vertical milling units have been removed and are no longer present. OPTION: Machine with 2 vertical milling units available at an additional cost. Machine is located in a soundproof cabin. L 3.8 x W 2.4 x H 2.6 m

Condition: used, Year of construction: 1994, from an authority Centro-Fix cutterhead rubber extension completely adjusted used in top condition cleaned functionally tested partially refurbished Manufacturer: Panhans Bdedpfx Amszd Hcqsrsh Type: 445-A Year of manufacture: 1994 Machine no.: 410 GS-tested for wood dust Number of cutters: 4 Feed rate m/min: 7 + 14 Auxiliary stop Table lips with slots Table lips with low noise motorized automatic brake Centrofix reversible cutters Table guide rollers Articulated pressure bar Rubber extension roller Digital display for planing height Electric height adjustment with tip fine adjustment Handwheel fine adjustment Extraction hood integrated Motor kW: approx. 5.5 Planing width approx. mm: 510 Planing height approx. mm: 200 Table length approx. mm: 2250 Extraction port mm: 160 Space requirement approx. L x W x H mm: 2300 x 1050 x 1400 Weight approx. kg: 1000 Total connected load approx. kW: approx. 5.5 Location: 97447 Gerolzhofen, free loading, unpacked Transfer in current condition as inspected, without warranty and guarantee

Condition: new, With a 520 mm planing width, motorized thickness table adjustment, and comfort switching - Stable steel and cast iron construction - Large, ribbed jointer tables made of cast iron - Smooth operation due to high dead weight - Four feed speeds - Motorized thickness table lift with two speeds and digital display - Segmented pressure beam at the infeed - Precision ball bearings on the four-knife cutterblock - Helical, hardened steel infeed roller for especially consistent and gentle wood feed - Outfeed roller with rubber coating - Large tiltable fence, adjustable from 90° to +45° Bsdsxnqyhjpfx Amrsdh - Standard auxiliary fence included - Powerful industrial motor - Pneumatic quick-change system with pneumatic raising and lowering of the jointer table - The extraction port remains in the same position for both jointing and thicknessing operations—no need for additional extraction hoses, inconvenient switching, or rerouting around the machine Scope of delivery: Technical Data: Dimensions and Weights: - Length (product): approx. 2300 mm - Width/Depth (product): approx. 1100 mm - Weight (net): approx. 980 kg Jointer: - Total table length: 2300 mm - Infeed table length: 1200 mm - Working height: 930 mm - Max. planing depth: 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt: 90 – 45° Extraction connection: - Extraction port diameter, thicknesser: 120 mm Installation Information: - Space requirement, length: 2300 mm - Space requirement, width/depth: 1610 mm Explanation: Max. travel paths or usable lengths are taken into account. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm Note: Please add the working area to the space requirement to determine the recommended free installation space for the machine. Thicknesser: - Min. working height: 3.5 mm - Max. working height: 250 mm - Max. cutting depth: 8 mm Electrical Data: - Main drive motor power: 7 kW - Connection voltage: 400 V - Frequency: 50 Hz Cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 - Cutterblock speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: ab/174978, overall weight: 2,950 kg, total height: 1,650 mm, total width: 1,700 mm, rotational speed (max.): 6,000 rpm, planing width: 230 mm, input voltage: 380 V, number of blades: 4, total length of planing tables: 4,700 mm, type of input current: three-phase, year of last overhaul: 2023, actuation type: electric, Equipment: CE marking, documentation/manual, four-sided planer SCM Superset XL Comp 6 documentation available, minimum/maximum planing dimensions width 25 to 230 minimum/maximum planing dimensions height 6 to 120 1x planing spindle 10 hp, sanding spindle 10 hp, width spindle 10 hp, thickness spindle 15 hp, additional spindle 10 hp, universal spindle 10 hp including planing heads/quick-change system, infeed table 2500, automatic height and width adjustment, with memory capacity for 99 programs Bdjdpfxozwf Eks Amrjh manual central lubrication system, Waxelite pump, including dust extraction pipes up to and including automatic sliding dust collector year of manufacture 2005, machine available for pick-up, currently available, price €17,500 excluding VAT

Condition: new, Year of construction: 2005, Planing machine with infeed device EM 11 with 5th spindle at the bottom Bodpfxszvvuas Amredh Includes 5 planing heads.

Condition: used, Kölle planer, or ‘planer’ for short, for smoothing and levelling (planing) timber. Includes an adjustable angle stop and accessories Technical data: - Working width: 600 mm - Blade system: Z2 strip planing blades Bsdpfx Amjzrxy Rerodh

Condition: used, Planing machine with planing shaft at the bottom and top Double-sided planing machine Feed rate steplessly adjustable up to 110 m/min Planing width max. 310 mm Electrical power 95.75 kW Bottom: 37 kW Top: 45 kW Bdsdpfsy Ry Ddex Amroh Feed: 13 kW Jointing mechanism at the bottom and top Good condition

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Bdsdpfsu Damdex Amreh

Condition: used, Year of construction: 1992, Working width: 520 mm Planing height: 250 mm Cutterhead: strip knives Number of knives: 4 Height adjustment: electric Planing thickness display: scale Feed speed: 2 speeds Infeed roller: steel Bdjdoyt E Raspfx Amrjh Outfeed roller: steel Table rollers: no Motor power: 5.5 kW Extraction port: 140 mm Machine length: 1200 mm Machine width: 1400 mm Weight: approx. 900 kg

Condition: used, with Tersa knife shaft used, good condition Make Müller Brugg Type DA 6 M Planing width approx. 610 mm Planing height approx. 220 mm Table length approx. 2200 mm Bridge protection Bdodevwgh Rjpfx Amrsh Slotted table lips Low-noise table lips Number of knives 4 pieces Knife system - Tersa reversible knives Table sliding rollers Space required approx. 2300 mm x 1500 mm x 1100 mm Weight approx. 2000 kg Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty

Condition: new, Ideal for demanding craftsmen and carpentersThe particularly long dressing tables made of one piece enable easy dressing of the workpiecesWork tables are made of gray cast iron, making them robust and permanently flatRear-opening dressing tables with tension spring support for quick and easy retoolingThanks to the fixed extraction hood, it is not necessary to reposition the extraction hose during retooling, This saves valuable working timeHelically toothed steel infeed roller ensures constant and even wood infeedRubber outfeed roller in the thickness run-out ensures even wood outfeedMaterial feed with four speedsPlane thicknessing table adjustment via handwheel with integrated display for the planing heightDIGITAL: with electric thicknessing table height adjustment and digital displayOn/off switch in operator positionPowerful industrial motorThe high machine weight ensures maximum precision and smooth paration for slot drilling deviceQuality Made in ItalyTECHNICAL DATADimensions and weightsLength (product) approx. 2250 mm Width/depth (product) approx. 1370 mmWeight (net) approx. 695 kgJointerTotal length of tables 2250 mmChip removal max. Dressing 5 mmDressing fence length 1200 mmDressing fence height 150 mmSuction connectionSuction nozzle diameter thickness 1 x 120 mmInstallation informationSpace requirement length 2250 mmSpace requirement width/depth 1440 mmExplanation of space requirement: The dimensions take into account maximum travel distances or effective cknessThicknessing table length 520 mmThicknessing table width 850 mmWorking height thickness min. 3 mmWorking height thickness max. 240 mmWorking length thickness min. 220 mmChip removal max. thickness 5 mmElectrical dataDrive motor power 7 kWSupply voltage 400 VMains frequency 50 HzPlaner cutterheadPlaner shaft type TERSAPlaner shaft diameter 120 mmNumber of planer knives 4 pcsPlaner shaft speed 5000 min¯¹Planer width max. 520 mmFeedFeed speed 5/8/12/18 m/minSCOPE OF DELIVERYJointer-jointer fence with round bar guide4 feed speedsTersa planer shaftManufacturer no.5503501 Bdjdpfx Aevwflbemreh

Condition: ready for operation (used), An old plano milling machine (guideway grinding machine) Waldrich Coburg is available. Bed length: 5500mm, bed width: 750mm, machine dimensions X/Y/Z: approx. 12000mm/300mm/3000mm, weight: approx. 37500kg. An on-site inspection is possible. Bdedjw Rqw Hspfx Amrjh

Condition: used, Year of construction: 1996, functionality: fully functional, High-performance planing and profiling machines / four-sided planer Manufacturer: Weinig Model: Hydromat 30 / H 30 N System originates from a parquet factory Planing width: approx. 220 mm Planing height: approx. 120 mm Spindle arrangement: Bottom (joiner), 22 kW Right, 7.5 kW Left, 18 kW Top, 30 kW Bdsdpjz D Exbjfx Amrjh Spindle diameter: 50 mm Feed speed adjustable, 12 – 120 m/min. Voltage: 380 V, 50 Hz

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Bdjdpfx Aexxb Rrjmrsh Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2000, functionality: fully functional, total width: 2,000 mm, total height: 1,800 mm, total length: 5,500 mm, overall weight: 6,500 kg, type of input current: three-phase, power: 150 kW (203.94 HP), Stetson Ross 6-12-C1 Planer/Moulder Reliable Stetson Ross 6-12-C1 woodworking machine for sale. Robust industrial design, built for intensive operation. Ideal for planing, profiling, and processing boards, logs, and surfaces in large quantities. The machine runs smoothly, has been regularly maintained, and is ready for immediate use. Equipment overview: Bdsdpfx Aexvn Tbomreh Model: Stetson Ross 6-12-C1 Application: wood planing / profiling Solid industrial construction Smooth operation and high processing quality

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM Bdsdpfoz Eh Egjx Amrsh TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH

Condition: excellent (used), Planing width 250 mm Planing height 120 mm Bdsdpfx Amjwlk E Iereh 1. lower spindle 2. right spindle 3. left spindle 4. right spindle 5. upper spindle 6. lower spindle 7. lower spindle 8. Universal spindle 360* - Hydraulic feed 6-60 m/min. - 10x driven table rollers - Spindle diameter 50 mm

Condition: new, Year of construction: 2026, CORMAK MB150 Jointer Planer The CORMAK MB150 jointer planer is a compact yet robust machine designed for precise surface flattening of wooden components. Its main purpose is to create perfectly flat surfaces on processed materials, preparing them for further machining operations. Thanks to its solid construction, precision-ground cast iron tables, and a three-knife cutter head, this woodworking planer provides a high level of accuracy and repeatability in both craft and semi-professional applications. Main advantages of the CORMAK MB150 machine Three-knife cutter head – ensures a smooth and precise surface finish after a single pass of the material. Cast iron working table – made of high-quality cast iron, providing stability, rigidity, and resistance to deformation. Safe and convenient operation – a safety switch mounted on an adjustable arm is easily accessible during operation. Adjustable cutter shaft guard – allows precise adjustment of the guard height, angle, and extension, increasing operator safety. Noise reduction system – integrated table silencers reduce the noise level during operation. Compact dimensions and stability – despite its small size, the machine’s 105 kg weight ensures rigidity and minimizes vibrations. Construction and technology The CORMAK MB150 planer is built around a cast iron body that provides excellent durability and resistance to deformation. Working components, including the Ø62 mm cutter shaft, are equipped with three replaceable knives measuring 170 x 15 x 3 mm. This design ensures high cutting accuracy and easy maintenance of the tools. The adjustable tilting fence allows the material to be positioned at an angle of up to 45°, providing a wider range of woodworking applications. Precision and working efficiency The machine is powered by a motor with a rating of S1 1.1 kW / S6 1.5 kW, reaching a cutter shaft speed of 4500 rpm. These operating parameters ensure smooth and efficient processing of softwood, hardwood, boards, beams, and wooden elements. The maximum working width of 152 mm and a planing depth of up to 13 mm make the MB150 an excellent solution for precise preparation work before further material processing. Applications The MB150 jointer planer is designed for: Craftsmen and carpenters working daily with solid wood, Service and model-making workshops, Advanced home users looking for stability and precision, Preliminary processing of boards, strips, beams, and glued wooden components. Standard equipment Three-knife cutter head, Adjustable cutter shaft guard, Tilting fence with angle adjustment, High-quality cast iron tables, Manual planing depth adjustment knob, Integrated Ø100 mm dust extraction port, Power cable with plug. Technical specifications Parameter Specification Motor power S1 1.1 kW; S6 1.5 kW Power supply 230 V Motor speed 2850 rpm Maximum working width 152 mm Maximum planing depth 13 mm Cutter shaft speed 4500 rpm Number of knives 3 Knife dimensions 170 x 15 x 3 mm Cutter shaft diameter Ø62 mm Bsdpfsvughrsx Amredh Tilting fence angle range 0°–45° Working table dimensions 1210 x 185 mm Dust extraction port diameter Ø100 mm Weight 105 kg Dimensions 1195 x 530 x 1150 mm

Condition: used, AD planer Felder AD741, very good condition, year of manufacture 2003, 4 kW S6, 400 V, 410 mm table length, 2000 mm table width, 4 knives, approx. 400 kg Bedpfx Amjvrvkderodh Prices subject to change, errors, printing and typesetting errors reserved