Used Plasma Torch for sale (804)

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) Lodjvpalaspfx Affeak ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: new, Year of construction: 2024, CNC plasma/gas cutting machine PCO-3015-AG Ledjh E Sgtspfx Affsak The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1520 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2280 mm - Height: 1500 mm - Total mass: 1200.0 kg - Maximum load: 2500.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems GCS – Gas Cutting System – An integrated oxy-fuel system that can cut sheets up to 150mm thick. THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Year of construction: 2022, operating hours: 500 h, condition: excellent (used), Flare including ignition system for sale from a SMR hydrogen plant. Lasdpfx Afjxt Dyrsfjk

Condition: used, Year of construction: 2019, CNC Gantry Plasma Cutting Machine Manufacturer: Microstep Model: MasterCut Compact 4001.20Ptk Year of manufacture: 2019 CNC control Laedpfx Afexnmbnjfok Working area: 2 x 4 m 'ʻMasterCutʼ' plasma rotator with fully automatic support for weld seam preparation 1 plasma torch with Kjellberg HiFocus 280i power source TEKA filter unit 161225

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Griesheim, machine cutting torch, flame cutting machine -Type: Quicky Electronic Ljdpfxjxy Hr Re Affsak -Cutting speed: adjustable -Voltage: 220 V 40 W -Dimensions: 520/280/H300 mm -Weight: 7.2 kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, Fully operational plasma cutting machine in very good condition. MicroStep PLS 7501.25PG Equipped with two torches: plasma and gas. Power source: Hypertherm, HyPerformance Plasma HPR260. Cuts mild steel and stainless steel. Laedpfx Afjwinpxofek Table dimensions: 7.5 m x 2.5 m. The machine can be inspected under power in Vilnius.

Condition: used, Year of construction: 2017, operating hours: 4,032 h, functionality: fully functional, TCI BP-C 4020 Combi Lajdpfxsxtu E Eo Affok Excellent condition Still in daily use and can be inspected under power at any time Cutting area 4000x2000 Plasma 130A Many wear parts included Additional stainless steel grid table for cutting aluminium and stainless steel sheets

Condition: excellent (used), I sell plasma cutter hypertherm powermax 800 d very good condition. /////Price listed for 1 pc ///// Plasma cutter Hypertherm Powermax 800 Lodpfx Ajulc Ixjffeak Plasma cutter description The Powermax800 plasma cutting system uses an inverter power supply to provide a smooth DC output voltage for superior cutting and gouging of mild steel, stainless steel, aluminum and other metals. The Powermax800's power supply provides a constant output current that varies from 20 to 50 amps, providing optimal performance for all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and cut metals up to 1 inch (25 mm) thick.

Condition: ready for operation (used), A CNC gantry plasma and flame cutting machine is available. Working dimensions X/Y: 6500mm/2500mm, power source: Kjellberg, max. number of torches: 3, control: Heidenhain TNC 355. An on-site inspection is possible. Lajdpfx Afox A Hhdsfjk

Condition: good (used), Year of construction: 2012, CNC Portal Plasma Cutting Machine Manufacturer: Microstep Model: SPL PAA 9001.25 Year of manufacture: 2012 CNC control Working area: 2,500 x 9,000 mm Ledpfju U Hm Ajx Affoak 1 plasma torch with Kjellberg HiFocus 280i power source 2 oxy-fuel (propan) torches Beuting oscillating discharge table Donaldson DFPRO12 filtration system for outdoor installation 161225ä

Year of construction: 2006, condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch Ledpfx Aoxy Hqtsffsak -Manufacturer: Messer Cutting & Welding, machine cutting torch, flame cutting machine -Type: Quicky -Cutting speed: adjustable -Voltage: 230 V 40 W -Dimensions: 520/280/H330 mm -Weight: 7.8 kg

Condition: defective spare-parts repository (used), Year of construction: 2006, functionality: not functional, type of input current: three-phase, overall weight: 1,500 kg, input voltage: 230 V, total width: 2,450 mm, total height: 1,550 mm, total length: 10,000 mm, table height: 800 mm, positioning speed: 20,000 m/min, space requirement length: 10,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,500 mm, height adjustment type: pneumatic, ESAB E-Vent Plasma Cutting System + Hypertherm Powermax 1000 – Year of Manufacture 2006 – Defective / For Hobbyists For sale is an ESAB MXL-P 2000, E-Vent plasma cutting system (year 2006) including a Hypertherm Powermax 1000 plasma source. The machine is defective and is being sold as a non-working unit/parts donor. The Powermax 1000 is present; operational status has not been tested. Key technical data (ESAB E-Vent): * Machine length: approx. 7000 mm * Cutting length: approx. 6000 mm * Machine width: approx. 2450 mm * Cutting width: approx. 1500 mm * Machine height: approx. 1550 mm * Weight: approx. 1500 kg * Voltage: 230 V / 50 Hz, Power consumption 2 kVA Ideal for: Ljdpex Ap Tpefx Affsak * Refurbishment * Conversion to new control system * Parts procurement (gantry, guides, table, plasma source) No warranty, no returns.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, track width: 3,000 mm, working range: 6,000 mm, total width: 3,800 mm, total length: 11,000 mm, product height (max.): 70 mm, cutting height (max.): 60 mm, Lind plasma cutting system with HiFocus 360I Hypertherm cutting unit incl. KWE 360, PGV 3. Cutting table with complete extraction system. The plant is fully operational and in excellent condition. Demonstration possible. Original price €190,000.00. The plant is immediately available. The price is valid for purchase decisions made by the end of November!! Dismantling possible in January 2026. Laedpfx Afswmq Tzofok

Condition: used, Year of construction: 1996, Plasmacutter, Plasma Cutting Machine Manufacturer: SAF Ljdew Dpi Nopfx Affsak Type: Plasmatome 3 Control: Digisaf 2.5 Manufacturer plasma-source: SAF Type plasma-source: Nertajet HP120 Cutting-dimensions: 6000x2000mm Cutting-thickness: 35mm Incl. filter/extraction! Incl. documentation and peripherals Machine dismantled for transport - Year: 1996 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, power: 60 kW (81.58 HP), fuel type: electric, operation weight: 500 kg, maximum load weight: 500 kg, Year of construction: 2020, operating hours: 400 h, machine/vehicle number: 2020-2704-0001, Vacuum-Controlled Plasma Nitriding Furnace Laodpexz Divofx Affok

Condition: good (used), Year of construction: 2008, CNC portal plasma cutting machine Manufacturer: Messer Model: Multitherm 4000 CNC control: Global Control Plus Year of manufacture: 2008 Retrofit: 2019 Extraction table: 2,000 x 3,000 mm 1 ALFA oxy-fuel torch 1 plasma torch Power source Kjellberg HiFocus 280i Filter system Z-Line 9 ZDC Lajdpfx Afeiff Daofok In-house technicians available for installation, commissioning, and training! All spare parts in stock.

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch Lasdpfoxy Hqajx Affsk -Manufacturer: Messer Griesheim, machine cutting torch, flame cutting machine -Type: Quicky Electronic -Cutting speed: adjustable -Voltage: 220 V 40 W -Dimensions: 520/270/H330 mm -Weight: 8.6 kg

Condition: new, Titan DrillCut – Flexible Cutting and Drilling Center for Maximum Efficiency Lodpfxofz A I Eo Affsak The Titan DrillCut is a powerful CNC machining center that combines thermal cutting (plasma or oxy-fuel) with precise drilling and thread cutting in one machine. The robust gantry design ensures vibration-free processing even with heavy material thicknesses up to 200 mm. Equipped with the integrated VarioDrill system, it allows for efficient, non-hardening machining of holes from Ø 6 to 40 mm as well as thread cutting from M4 to M20. An automatic tool changer enables rapid switching between drilling, countersinking, and threading – ideal for automated production processes. This machine is the perfect solution for steel construction, mechanical engineering, and industrial metalworking, where utmost precision, flexibility, and production speed are essential.

Condition: used, Year of construction: 2020, controller model: , _____ Description: Year of manuf. : 2020 Technical specifications Working surface:2000 mm x 15000 mm Total width:5070 mm Height:1980 mm equipment :-Global Control S with 15" colour touchscreen :-Joystick and handwheel for Global Control S panel :-Cooling for the control cabinet :-Laser diode :-Drives up to a maximum of 35 m/min. AC :-Heat shield without air cooling :-Runway for double-sided longitudinal drive HEB :-OmniFlow oxyfuel supply up to 70 m'/h (gas flow control) :-ALFA machine cutting torch (internal ignition) :-Smartlifter 300 :-SensoMat ARKI :-Full addressing of gases :-Light barriers Ledpoxw A Icofx Affeak :-Safety device for wheel housing (foot switch)

Condition: used, Tepla Tepla 400 SC 230 Volt 13A 50/60Hz Lajdpfju T Egfex Affsk Pressure: 4-6 bar Scope of delivery: (see pictures) We will be happy to answer any further questions you may have over the phone. Written order possible by email or fax

Condition: good (used), Year of construction: 2000, CNC Gantry Plasma Cutting Machine Manufacturer: Messer Model: Omnimat L5000 Year of manufacture: 2000 Laodshwtn Iepfx Affek CNC control: Fanuc Working area: 3000 x 6000 mm Extension possible 1 plasma torch with Hypertherm HT2000 power source 3 oxy-fuel torches without table without filter 161225ä

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Griesheim, machine cutting torch, flame cutting machine -Type: Quicky -Cutting speed: adjustable -Voltage: 220/240 V -Dimensions: 360/330/H280 mm Lasdpfx Afsxy Hpvsfsk -Weight: 6.7 kg

Condition: good (used), Year of construction: 2007, CNC portal plasma cutting machine Manufacturer: Microstep Model: SPL-P 12001.20 Year of manufacture: 2007 CNC control Laedpfx Aouv Hkgoffjk 1 plasma torch with Kjellberg HiFocus 160i power source Extraction table: 2 x 12 m Donaldson Torit DCE filter system 161225ä

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch Ledpoxy Hnfefx Affjak -Manufacturer: Messer Griesheim, machine cutting torch, flame cutting machine -Type: Quicky Electronic -Cutting speed: adjustable -Voltage: 220 V 40 W -Dimensions: 550/280/H300 mm -Weight: 8.4 kg

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Griesheim, machine cutting torch, flame cutting machine Lasdpfxjxy Hlwo Affek -Type: Quicky Electronic -Cutting speed: adjustable -Voltage: 220 V 40 W -Dimensions: 580/280/H370 mm -Weight: 7.8 kg