Used Plasma Torch for sale (758)

Condition: excellent (used), Year of construction: 2021, • Baykal BPL-H 4012 • Supplied new in 2021 • Hypertherm XPR300 AutoGas • EDGE Connect CNC Iedpfxszp D T Do Ah Estl • Twin plasma heads • Arc hours: 3,480 and 5,448 • 4 m x 10 m bed

Year of construction: 2011, operating hours: 34,000 h, condition: used, functionality: fully functional, We have one dual temperature control unit from Single for sale. The original purchase price was approximately €5,100. Medium: Water Isdpfx Aezbx Rpsh Eetl Reinforced pump Heating capacity: 9 kW per unit Cooling capacity: 20 kW per unit Mobile Interface: 20 mA PT 100 sensor Flow measurement Alarm

Condition: excellent (used), Year of construction: 2020, operating hours: 860 h, functionality: fully functional, machine/vehicle number: 2426201745, type of input current: AC, working range: 3,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, table length: 3,000 mm, working width: 2,000 mm, Equipment: documentation/manual, ZINSER 2426 CNC plasma cutting machine with Hypertherm XPR170 VWI Year of manufacture 2020 – Very good condition – including programming software For sale is a well-maintained and little-used CNC plasma cutting machine, type ZINSER 2426, with a Hypertherm XPR170 plasma source. The machine is in very good technical and optical condition and has only been used in our own operations. It is immediately ready for use and can be inspected and demonstrated under power after prior arrangement. Technical data: Manufacturer: ZINSER Type: 2426 Year of manufacture: 2020 Control system: ZINSER CNC 5010 Plasma source: Hypertherm XPR170 with VWI technology Cutting table: 3,000 × 2,000 mm Travel range, longitudinal axis: approx. 4,000 mm Side arm on the right Preparation for the integration of a pipe rotating unit CNC-controlled height control Programming software / nesting software included Special features: The combination of the ZINSER machine and the Hypertherm XPR170 enables precise and economical cutting operations in mild steel, stainless steel, and aluminum. The modern XPR technology ensures excellent cut quality and high process reliability. Another advantage is the existing preparation for a pipe rotating unit, which means that the machine can be easily expanded if required. Scope of supply: ZINSER 2426 CNC plasma cutting machine Hypertherm XPR170 plasma source ZINSER CNC 5010 control system Programming software / nesting software Documentation and manuals Not included in the scope of supply: Extraction system. Location: Austria Isdpfxjza Eufj Ah Eotl Inspection and test cut possible after prior arrangement. Disassembly and transport are to be organized by the buyer.

Condition: new, Year of construction: 2023, functionality: fully functional, table length: 1,500 mm, table width: 3,000 mm, workpiece height (max.): 150 mm, control type: CNC control, TECHNICAL DETAILS Workpiece thickness max.: 150 mm Plasma cutting range: 0.5 to 60 mm Recommended cutting range: 0.5 to 40 mm Maximum penetration depth: 30 mm Table width: 3,000 mm Table length: 1,500 mm Torch heads: 1 Feed rate: 20,000 mm/min Vertical adjustment: 400 mm MACHINE DETAILS Control system: CNC Filter area: 100 m² Fan capacity: 4,500 m³/h Motor power, extraction: 5.5 kW Current consumption: 11.5 A Noise level: 75 dB(A) (+ max 10 dB(A) during cleaning pulse) Iedpjzlg E Ijfx Ah Eotl Intake nozzle: DN 250 mm Total power requirement: 15 kVA Connection voltage: 400V/50 Hz or 480V/60Hz Type of current: 3Ph+N+PE Space requirement: approx. 4.5 x 2.5 m Frequency converter: EATON, located on the left in the attached control cabinet Fan arrangement: on the machine, including sound-absorbing duct bend, right side EQUIPMENT Heavy-duty machine bed with precision guides Ball-bearing transverse carriage Thermal separation of drive and cutting area Automatic height detection and torch height control Torch holder with collision protection 3-sided access to the cutting area SATOTEC extraction table Kjellberg Q1500 power source Fully automatically controlled plasma gas console Q-Gas Lantek Expert Cut CAD/CAM module TEKA EcoCube extraction system Automatic filter cleaning (PLC) Compressed air connection and condensate drain Grounding bolt Cables in UL design

Year of construction: 2024, condition: new, Everything can be configured according to your requirements; very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Steel welded construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek software with automatic nesting Position determination of the sheet to be cut using a laser DURMA torch height control Double-sided drive system (rack and pinion) AC servomotors for movement in the X and Y axes CNC control outputs/inputs for the filter unit Consumables starter kit Plasma torch * Ignition console * Torch height control with Ball screw spindles on double Linear guides * Optional equipment: Itsdpofirx Nsfx Ah Eel Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm HPR 260 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch CE standard safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Oxy-fuel cutting torch Plasma torch protection system Manual plasma angle cutting head, CNC angle cutting head (+/- 45). Single drilling head Multi-drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning light for errors and program end With over 60 years of experience in research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced manufacturing plants with a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned producers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Giessen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to get an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our mission is to be your direct contact on site and offer you services related to training and customer service. We are happy to support you now from Germany - from consulting, through purchasing and throughout the entire service life of your machine. With our German branch, we are always available locally when you need us in order to react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions when it comes to sheet metal processing.

Condition: good (used), Year of construction: 2008, Used 6000 x 2000 mm plasma cutting machine from HPM (Italy) Type: GV 60 20 Table dimensions: 6000 x 2000 mm Itedpfx Aezd Ur Tjh Esl Hypertherm 130 XD with Truehole option New Hypertherm EdgeConnect CNC control + new servo motors Modesta extraction system Includes spare parts Year of manufacture: 2008 CNC control renewed in: 2018

Condition: used, Year of construction: 1999, cutting width 3000 mm Itsdozmy Tbopfx Ah Esl Numbers of torche 1 Cutting system Plasma PA-S 150 total power requirement 4,5 kVA weight of the machine ca. ca. 8-12 t required space 16000 x 5000 mm

Condition: as good as new (ex-display), Year of construction: 2023, functionality: unexamined, type of input current: AC, input voltage: 230 V, ground cable length: 3,000 mm, overall weight: 11 kg, warranty duration: 3 months, type of cooling: air, hose package length: 4,000 mm, welding current (min.): 5 A, welding current (max.): 200 A, Cjays Tig 200E ACDC – Gas-cooled TIG ACDC 3 Months Warranty Specifications: 5-200 AMP 230 Volt 2/4 Step Pulse / Pulse Frequency Pre gas / Post gas Ijdpfozmnqzox Ah Estl Start current / End current Up slope / Down slope AC Balans Elektrode option Including: SR17 Welding torch, ground cable with clamp, gas cable, and manual. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, working range: 1,500 mm, total length: 4,500 mm, track width: 2,000 mm, table length: 3,000 mm, ZINSER 1225, CNC 6010 Year of manufacture: 2023 Arc height control ZAC 5070 with Hypertherm plasma system XPR 170 Core Plus Cutting table 1,500 x 3,000 mm incl. extraction system Software available upon request. Iodpfx Ahezwvx Is Eotl

Condition: used, functionality: fully functional, power: 60 kW (81.58 HP), fuel type: electric, operation weight: 500 kg, maximum load weight: 500 kg, Year of construction: 2020, operating hours: 400 h, machine/vehicle number: 2020-2704-0001, Vacuum-Controlled Plasma Nitriding Furnace Itsdsxz Divopfx Ah Ejl

Condition: used, Year of construction: 2011, total width: 2,400 mm, total length: 4,500 mm, total height: 2,200 mm, Empty weight: 3.000 kg Price: On request Including various accessories, replacement parts and spare parts - Year: 2011 - Documentation available: Yes - CE marking present: Yes Itodpfxexrz Hmo Ah Eol - CE certificate present: No - Serial number: 289.112 - Drive system: CNC - Control system brand: Beckhoff - Power [kW]: 16.8 - Resonator brand: Hypertherm - Resonator type: Powermax 105 - X-axis travel [mm]: 3000 - Y-axis travel [mm]: 1500 - Max. material thickness [mm]: 32 - Control type: Beckhoff - Transport dimensions: 4500mm x 2400mm x 2200mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2023, condition: like new (used), functionality: fully functional, machine/vehicle number: 123168, Like-new equipment; currently located at the subsidiary plant. Isdpey R Ah Esfx Ah Eotl plasma.com/low-pressure-plasma-tetra-30/

Condition: new, Year of construction: 2024, Everything is configurable upon request, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Steel welded construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek software with automatic nesting Position determination of the sheet to be cut using a laser DURMA torch height control Double-sided drive system (rack and pinion) AC servo motors for movement in the X and Y axes CNC control outputs/inputs for the filter unit Consumables starter kit Plasma torch * Ignition console * Torch height control with Ball screws on double Linear guides * Optional equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch HPR 260 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch CE standard safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Oxy-fuel cutting torch Plasma torch protection system Manual plasma bevel cutting head, CNC bevel cutting head (+/- 45). Single drilling head Multi-drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning light for errors and program end D9hnyc97o With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact person from the Durmazlar team, who will competently assist you with advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to get an overview of our machines on site, to be convinced firsthand by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct contact person on site and to offer you services relating to training and customer service. Isdpofirx Tofx Ah Estl We would now like to support you from Germany – from advice to purchase and throughout the entire life cycle of your machine. With our German branch, we are always on site when you need us to be able to react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions when it comes to sheet metal processing.

Condition: new, Year of construction: 2024, Everything can be configured according to your needs, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Steel welded construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek software with automatic nesting Position determination of the sheet to be cut using a laser DURMA torch height control Double-sided drive system (rack and pinion) AC servomotors for movement in the X and Y axes CNC control outputs/inputs for the filter unit Consumables starter kit Plasma torch * Ignition console * Torch height control with Ball screw spindles on double Linear guides * Optional equipment: Iodefiqgrjpfx Ah Eotl Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm HPR 260 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch CE standard safety wire Automatic gas console for Hypertherm Manual gas console for Hypertherm Oxy-fuel cutting torch Plasma torch protection system Manual plasma angle cutting head CNC angle cutting head (+/- 45) Single drilling head Multi-drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning light for errors and program end With over 60 years of experience in the research and production of machines for sheet metal processing, with 8,000 machines produced annually in three technologically advanced manufacturing facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to sheet metal processing machines. Our showroom offers you the opportunity to gain an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our mission is to be your direct point of contact on site and to offer you services related to training and customer service. We are now happy to support you from Germany – from consulting to purchasing and throughout the entire life cycle of your machine. With our German branch, we are always there for you, so that we can react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 11.032.602/05013/3, input voltage: 400 V, type of cooling: water, overall weight: 30 kg, cutting current: 25 A, hose package length: 5,000 mm, ground cable length: 3,000 mm, Product description: Fine marker plasma marker from Kjellberg Finsterwalde For sale is a fully functional fine marker plasma marking device from Kjelllberg Finsterwalde. This device was used reliably until the last day of use and then stored professionally. It is in excellent condition and ready for immediate use. Technical details: Brand: Kjellberg Finsterwalde Model: Fine marker plasma marking device Hose package: 5 meters long, for flexible and versatile use Condition: Ijdpfx Ahoufyvle Eetl The device is fully functional, and you have the opportunity to check or have the function verified in person before picking it up. In addition, we are happy to provide a video demonstrating that the device is in perfect working order. This allows you to see the quality for yourself in advance. Scope of delivery: - Fine marker plasma marking device - 5 meter hose package This high-quality device is ideal for precise marking work and offers you the reliability and performance you expect from Kjellberg Finsterwalde. Inspection, function test and video: We are happy to check the functionality on site. Alternatively, we can send you a video on request to show you how the device works perfectly. Price: On request Don't miss this opportunity to acquire a well-maintained marking machine at an attractive price! For further information, the video or to arrange a viewing appointment, please do not hesitate to contact me.

Condition: good (used), MicroStep SPL-PA plasma cutting system with extraction and compressor technology Manufacturer: MicroStep Group Model: SPL-PA 4501.15+S50 Current requirement: 120 A Iodpfxsyvd Uij Ah Eetl Machine type: CNC plasma cutting system CNC control: iMSNC Design: Portal design with linear guides Extraction system: Donaldson Torit DCE Electrical connection for extraction system: 400 volts Motor power of extraction system: 7.5 kW Compressed air generation: Screw compressor Compressor manufacturer: Kaeser Compressor model: TA 8 CE marking: present Location: Waltenhofen, Germany Dismantling and loading by the seller included.

Condition: used, Plasma impulse gas metal arc welding machine, pulse machine EWM Type Tetrix 400 Plasma / Tetrix 400 DC-P Robot Plasma welding and soldering machine Art. No.: Serial No.: Year of manufacture 2003 Output: 400 amps = 40% duty cycle 360 amps = 60% duty cycle 300 amps = 100% duty cycle Setting range: stepless Open-circuit voltage: approx. 26 volts Mains connection: 400 volts, 50 Hz, 32 amps plug - Digital display for current - Digital display for voltage, job, and program - Various welding programs can be selected - Pulse mode - Separate 4-roller wire feeder EWM, Type DV cold wire hand with connecting hose package approx. 5 meters - Approx. 4 meter hose package - External EWM water cooling, Type Cool 71 U41 DKF - External high-voltage unit - Welding machine equipped with 1 mm welding wire Space required L x W x H: 1300 x 640 x 1830 mm Weight: 245 kg Very good condition Itedpfx Ahjzwb R Ne Esl

Condition: new, Year of construction: 2025, PLASMA BURNER MODEL MTX 1500/3000 Construction: steel+aluminum Overall dimensions: 3350/2200/1300 Working area: 3100/1520/140 XY axis drive double-sided gate drive: 4Nm stepper motors with gear ratios, gear strips class 8 Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasm system Collision system to protect the torch from damage Linear guides: Hiwin Automatic material detection system Power supply: 240V Permissible load: 1700kg Total weight: 1000kg net INCLUDED: - control panel Itedpfx Aenfvmdoh Eel -water table -replaceable grate -control software in German, English, Polish -Declaration of Conformity CE - DTR - warranty It is possible to select the appropriate Hypertherm cutter to meet the individual needs of the company.

Year of construction: 2023, condition: new, CNC PLASMA CUTTER, ProMax Professional series TECHNICAL SPECIFICATIONS Working width: 1500 mm Working length: 3000 mm Travel speed: up to 50 m/min KEY FEATURES DELTA servo drives X-axis carriage with dual rails Fast START – machine preparation for cutting in under 1 minute Planetary gearboxes Helical bevel gears, class 6 Touchscreen monitor with industrial computer Remote control Sectional extraction table with pneumatic actuators CS anti-collision system – protects the torch from collisions Isdpfeipht Rsx Ah Eetl CLS central lubrication system Dual Y-axis support Laser pointer indicating the torch position SC system – safety system We also offer tables with different dimensions.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 11139737, sheet thickness (max.): 30 mm, working width: 2,000 mm, working length: 6,000 mm, empty load weight: 1,950 kg, The machine will be available starting mid-September! TECHNICAL DETAILS Iodpfxszv N Hpo Ah Estl Working area: 6,000 × 2,000 mm Working length: 6,000 mm Working width: 2,000 mm Max. sheet thickness: 30 mm Travel range X-axis: 6,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 150 mm MACHINE DETAILS Plasma source: Kjellberg HiFocus 161 neo Cooling type: Water Voltage: 3 × 400 V Power: 9 kW Frequency: 50 Hz Number of phases: 3 Net weight: 1,950 kg EQUIPMENT Dust extraction system: Donaldson Torit DCE

Condition: good (used), Year of construction: 2017, operating hours: 494 h, functionality: fully functional, machine/vehicle number: 27026757, type of input current: three-phase, total height: 510 mm, total width: 300 mm, total length: 706 mm, input voltage: 400 V, ground cable length: 5,000 mm, overall weight: 100 kg, type of cooling: water, hose package length: 1,200 mm, electrical fuse: 35 A, open-circuit voltage: 73 V, welding current at 60% duty cycle: 360 A, welding current at 100% duty cycle: 320 A, input current: 26 A, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 400 A, input frequency: 60 Hz, Equipment: type plate available, Fronius TPS 400i Pulse MIG/MAG welding system – complete with accessories For sale: Fronius TPS 400i Pulse professional MIG/MAG welding system, complete with wire feeder, mobile stand, and a comprehensive set of accessories. The Fronius TPS 400i Pulse is a professional welding machine suitable for a wide range of MIG/MAG applications. The machine features pulse welding and the ability to record welding data (datalogging). This datalogging is a built-in function of the welding machine and is not a separate accessory. Included with the machine: - Fronius TPS 400i Pulse - Fronius wire feeder, without stand - Sturdy mobile stand for the power source - 1.2-meter intermediate cable pack, currently connected - 20-meter intermediate cable pack, supplied as extra - 8-meter Push/Pull welding torch - Wera torque screwdriver, for correctly tightening the push/pull wire feed rollers - Box with various wear parts, including contact tips, gas nozzles, and other accessories - Ground cable with welding clamp - Connecting cables and other cables/hoses Itodpjzwhprjfx Ah Eol - Other accessories as shown in the photos - Manual available digitally Versatile professional system The combination of the 1.2-meter intermediate cable pack, the supplied 20-meter intermediate cable pack, and the 8-meter Push/Pull torch makes this system highly versatile for welding aluminum, among other applications, and for larger structures or workpieces where the welding machine cannot be placed directly next to the workpiece, the set offers a great deal of flexibility. The built-in welding data recording/datalogging is of interest to professional users who value process monitoring, quality control, and traceability of welding work. The machine has been used and has normal signs of wear, but is in good and solid condition. Sold as a complete set as shown. Inspection and testing are possible by arrangement. Pick-up only, shipping not possible. A forklift is available.

Condition: excellent (used), Year of construction: 2020, PLASMA CUTTING TABLE WITH COMPRESSED AIR: TYPE REMOCUT II 1500-3000/105A PNEUMATIC ENGRAVER Iodpfoyug Enex Ah Ejtl

Year of construction: 2003, operating hours: 200 h, condition: ready for operation (used), Equipment: 4 in one shovel, Bluetooth, Capable to welt up to 8mm. Roller table including the deal Feel free to offer. Machine will be dismantled after 6th of June 2026 Iedpfey Tia Hjx Ah Estl

Year of construction: 2010, condition: ready for operation (used), Max. sheet dimensions: 6050x2550mm, max. cutting speed: 10m/min, length: 8125mm, width: 3800mm, height: 1900mm, with documentation, an on-site inspection is possible. Itsdpfxeri Skae Ah Eel

Condition: like new (used), functionality: fully functional, overall weight: 130 kg, USED WELDER INVERTER MULTIPROCESS 520A, MIG/MAG-TIG-MMA, CEBORA KINGSTAR 520 TS. Itedpfozxwy Nsx Ah Eel