Used Plank for sale (139)

Condition: used, maximum load weight: 42,400 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck ----* Manufacturer: Goldhofer * Type: STZ-VLS4-37/80 * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck Cedex Suzaspfx Ac Njpu * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis * 4 pairs of stake holes in the low bed floor * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear * Operation of hydraulic ramps + supports at the rear left * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader * 1st hand German vehicle!! German papers!! 1st hand!! Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow * Total weight: 28,000 kg * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports * Loading manometer * 1st hand German vehicle!! German papers!!

Condition: new, overall weight: 2,700 kg, Included: Removable second tier / Parabolic suspension / Livestock partition gate / Spare wheel / Upper ventilation / Lower ventilation Technical Data: • Brand: Ifor Williams • Model: TA5 • Vehicle Type: Livestock Trailer • Vehicle Condition: New • First Registration: Not yet registered • Roadworthiness (TÜV): 2 years from first registration • Internal dimensions (LxWxH): 311 x 156 x 183 cm • External dimensions (LxWxH): 465 x 207 x 235 cm • Loading height (floor): 42 cm • Permissible total weight: 2,700 kg • Unladen weight: 890 kg • Payload: 1,810 kg • Chassis: Low-loader (wheels positioned alongside the body) • Tyres: 175/75R16C • Suspension: KNOTT parabolic suspension • Jockey wheel: Yes • 100 km/h approval: No DESCRIPTION • Reinforced, bolt-fastened V-drawbar • Very robust welded steel frame • Frame fully hot-dip galvanized by immersion • Numerous crossmembers for high point load capacity • Floor made from pressure-treated wooden planks, overlaid with 2 mm thick aluminium tread plate • Aluminium walls • EasyLoad deck system for the second tier • Sheep deck removable and installable without tools • Rear ramp tiltable for loading onto the upper tier • Split entry door on the left in direction of travel • Interior light Cpodpox Srqrjfx Ac Neu • Sturdy, hot-dip galvanized frame structure • Heat-reflective roof • Ventilation openings on the sides at roof level • Additional ventilation openings on the sides at the bottom • 2 side supports for added stability at the rear • Rear flap made of aluminium with integrated step strips • Swivelling livestock partition gate on the ramp, made of aluminium • Parabolic axle suspension from KNOTT for maximum driving comfort • Large 16-inch wheels for optimal road performance • Spare wheel with bracket • Automatic reverse system • KNOTT overrun brake and parking brake • Lockable coupling head • 13-pin plug with spiral cable • Reversing light • Large-dimensioned safety lighting • Integrated rear fog lamp • Spare wheel with mounting bracket • Centre-mounted jockey wheel Optional accessories available – please enquire: • Interior cross partition • Reversing light • 100 km/h approval with shock absorbers • And much more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery available - All prices incl. VAT - Registration documents can be sent in advance, or temporary export plates (Germany) can be arranged - Export plates incl. customs declaration available Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for immediate delivery! We have been authorized dealers and service workshops for over 30 years for brands such as Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many others. - Errors, mistakes, and prior sale excepted -

Condition: new, overall weight: 3,500 kg, Incl. removable second deck / parabolic suspension / partition gate / spare wheel / top ventilation / bottom ventilation Technical Data: • Brand: Ifor Williams • Model: TA510 • Vehicle type: Livestock trailer • Condition: New • First registration: Not registered • Roadworthiness certificate (TÜV/HU): 2 years from first registration • Internal dimensions (LxWxH): 434 x 178 x 183 cm • External dimensions (LxWxH): 582 x 228 x 234 cm • Loading height (floor): 42 cm • Perm. gross weight: 3,500 kg • Unladen weight: 1,370 kg • Payload: 2,130 kg • Chassis type: Low loader (wheels beside the body) • Tyres: 175/75R16C • Suspension: KNOTT parabolic spring suspension Cpodpfx Ajx Srdfsc Nju • Jockey wheel: Yes • 100 km/h approval: Optional, retrofittable DESCRIPTION • Reinforced, bolted V-drawbar • Very robust welded steel frame • Frame fully hot-dip galvanized by immersion • Numerous crossmembers for high point load capacity • Floor made of pressure-treated timber planks with 2 mm thick aluminium tread plate • Aluminium sides • EasyLoad deck system for second deck • Sheep deck floor removable/ installable without tools • Rear loading ramp can be set up for second level access • Split access door on the left side in direction of travel • Interior light • Heavy-duty, hot-dip galvanized frame • Heat-reflecting roof • Side ventilation openings at the top of the roof • Additional side ventilation openings at the bottom • 2 side struts for additional stability at the rear • Rear flap made of aluminium with integrated step strips • Swing gate at the rear ramp made of aluminium • KNOTT parabolic spring axles for maximum ride comfort • Large 16-inch tyres for optimal road holding • Spare wheel with bracket • Reversing automatic system • KNOTT overrun and parking brake • Lockable tow-head • 13-pin plug with spiral cable • Reversing light • Large, safety lighting system • Integrated rear fog light • Spare wheel with bracket • Centrally positioned jockey wheel Optional accessories - please enquire: • Interior cross partition • Reversing light • 100 km/h approval with shock absorbers • And much more Brand new vehicle with warranty and roadworthiness certificate (TÜV). - Financing or leasing possible - Nationwide delivery available - All prices incl. VAT - Vehicle registration document can be sent in advance, or export/transfer plates (Germany) can be provided - Export plates incl. customs clearance also available Descriptions and images are copyright protected!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from stock! We have been a specialist dealer and repair workshop for over 30 years for: Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands. - Subject to errors, changes, and prior sale -

Condition: new, overall weight: 2,700 kg, Including ramp and door combination / parabolic suspension / livestock gating / spare wheel / ventilation top / ventilation bottom Technical Data: • Brand: Ifor Williams • Model: TA5 • Vehicle type: Livestock trailer • Vehicle condition: New vehicle • First registration: without first registration • TÜV inspection: 2 years from first registration • Internal dimensions (LxWxH): 311 x 156 x 183 cm Cedox Sq Eujpfx Ac Nspu • External dimensions (LxWxH): 465 x 207 x 235 cm • Floor loading height: 42 cm • Permissible total weight: 2,700 kg • Unladen weight: 882 kg • Payload: 1,818 kg • Chassis: Low-loader (wheels beside the body) • Tyres: 175/75R16C • Suspension: KNOTT parabolic suspension • Jockey wheel: Yes • 100km/h approval: Optional, retrofittable DESCRIPTION • Reinforced, robust, bolted V-drawbar • Very robust welded steel frame • Frame fully hot-dip galvanised • Multiple cross members for high point load capacity • Floor made of pressure-treated timber planks covered with 2 mm thick aluminium chequer plate • Aluminium side walls • Split stable door on the left in the direction of travel • Interior light • Heavy-duty hot-dip galvanised frame structure • Heat-reflective roof • Ventilation openings at the roof sides • Additional ventilation openings at the lower side • 2 side struts at the rear for extra stability • Rear flap made of aluminium with integrated anti-slip strips • Rear flap with ramp and door combination (convertible between full-width ramp and twin doors) • Swinging aluminium livestock gating at the rear ramp • KNOTT parabolic axle suspension for maximum driving comfort • Large 16-inch wheels for optimal road holding • Spare wheel with bracket • Automatic reverse mechanism • KNOTT overrun brake and parking brake • Lockable coupling head • 13-pin plug with spiral cable • Reversing lights • High-capacity safety lighting • Integrated rear fog light • Spare wheel with holder • Centrally mounted jockey wheel Optional Accessories – please enquire: • Internal cross-division • Reversing light • And much more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration documents can be sent in advance or temporary number plates (Germany) can be provided - Export plates including customs clearance available Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available immediately! We have been an authorised specialist dealer and repair workshop for over 30 years for brands including Brian James, Blyss, Debon, Humbaur, Hapert, Unsinn, Cheval Liberte, Ifor Williams, Koch, Lorries, Martz, Stedele, TPV, Tohaco, Vezeko, Variant, Vlemmix, and many more. - Subject to errors, prior sale and change -

Condition: used, mileage: 150 km, power: 129 kW (175.39 HP), first registration: 02/2026, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,800 mm, loading space width: 2,200 mm, loading space height: 2,400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, Are you looking for a different model, engine variant, size, or other features? Feel free to contact us. We offer financing and leasing at attractive terms – also available for the Netherlands, Austria, and start-ups! ----Vehicle: * Wheelbase: 4,100 mm * 6-speed manual gearbox * Single cab * Twin rear wheels * Gross vehicle weight: 7.2 tonnes * Digital tachograph * Speed limiter: 90 km/h Interior: * Passenger bench seat with multifunction storage * Overhead storage compartment above the windshield * Luxury driver's seat, sprung, heated * Grab handle on A-pillar * Comfort headrests * Leather multifunction steering wheel * Cloth seat covers Safety & Assistance: * Electronic Stability Program (ESP) * AEBS System + City Brake * Driver airbag * Front monitoring system (MOIS) * Oper. & maint. manual electronic * Rear parking sensors * Lane Centering Plus (LC) * Eco-Smart function * Additional speed limiter * Seatbelt warning signal F/B * Driver Drowsiness Alert (DDAW) * Turn assist, passenger side (BSIS) * Rear blind spot radar * Traffic sign recognition incl. (ISA) * Spare wheel with rear frame mounting Wheels & Technology: * Electrically adjustable and heated mirrors * Digital radio DAB 7" touch display * Apple CarPlay/Android Auto * All-weather tires * AIRPRO air suspension on rear axle * Manual central handbrake * Air conditioning with automatic climate control * Heated fuel filter * Auxiliary hot water heater * Light and rain sensor * Fog lights * Full LED headlights * 4G connectivity box incl. TCO * Adaptive cruise control (ACC) * Pre-wiring for toll system (OBU) * Central locking with remote control * AdBlue tank 20 L and driver heater * Integrated 90 L fuel tank * Battery 12V 110 Ah Csdpfx Acjv R Rfmo Nopu Sliding Curtain: * Steel frame * Antislip plywood flooring * Side aluminium drop-in planks * Sliding curtains both sides (color: black, other colors on request) * Upper guide rail for sliding curtain * Lower securing straps for sliding curtain * Roof spoiler * Tailgate * Reversing camera * Side underrun protection * Mudguards with splash flaps * Side marker lights Tail Lift: * Dhollandia * Load capacity: 1,500 kg * Platform depth: 1,800 mm * Roll-off protection * LED warning lights * Remote control with spiral cable * Towbar up to 3.5t trailer payload (ball hitch, 13-pin 12V trailer socket) Additional bodywork extras available for a surcharge. ----Notice: Please call before your visit – we want to ensure your required vehicle is available on site. If the vehicle is not in Wachtendonk, we are happy to deliver from our stock. Custom builds available on request. Your vehicle partner since 1996. Call or email now – we look forward to hearing from you! No liability for typographical or printing errors. Subject to prior sale and changes.

Condition: new, maximum load weight: 29,560 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,600 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Equipment: ABS, Stock no. 5640 Purchase, lease, or lease with a purchase option by arrangement! Approximately 60m³ STAS agricultural moving floor trailer with integrated grain hopper / service door, etc. ---- * Manufacturer: STAS * Model: FARMSTAR - Agricultural Moving Floor Cpsdpsxl Ntuefx Ac Nsu * First Registration: - (New vehicle) * Colour: Chassis RAL 9005, Superstructure RAL 7001, Tarp SIO 7500 * Volume: approx. 60m³ (10.60m long x 2.48m wide x 2.30m high) * Axles: 3x SAF axles / 1st axle with lift and traction assistance / disc brakes * Tyres: 385/65 R22.5 with Speedline Diamond aluminium rims * Wheelbase: 6.25m * Suspension: Air suspension with raise/lower functionality * Gross Weight: 36,000 kg * Unladen weight (manufacturer): 6,440 kg * Payload: 29,560 kg * ABS / EBS * CARGO FLOOR CF 500 SL-C with radio remote control and control panel rear left * 21-plank floor system, 6mm ribbed * Aluminium end caps, welded * Rear closure plate made of aluminium * Integrated grain hopper * Additional guides under the floor profiles * Residue emptying wall with brushes and stainless steel handles * Bulkhead made from aluminium plank profiles * Service door in the bulkhead * Smooth side walls inside and outside (grain specification), fully welded * Inspection window in the left rear side wall * Swing doors (50/50 split) * 4x locking rods * Swivelling crossbar at door closure * Hydraulic connections at the front with 3m hoses and * Connection option below the superstructure (without hoses) * Pressure 1" female * Return 1" female * Operator platform with access front left and right * Fifth wheel height 1,150mm * Individual mudguards * Full load supports * Rolling tarp (900g/m²) with quick-clamp system * Aluminium roof bows, foldable * Foldable rear aluminium light guard * Aluminium air tanks * 1x toolbox front left * 1x toolbox rear right * Shovel & broom holder left * 1x 2x8-step aluminium access ladder fixed right * 1x extendable ladder at the rear right * Smartboard * TPMS tyre pressure monitoring * LED rear lights – 5-chamber * 2x LED work lights in front of the axles * 2x LED reversing lights at the rear * 1x LED work light inside the bulkhead * 2 x 3-function lamps at the top of the door crossbar Purchase, lease, or lease with a purchase option by arrangement! Notice regarding possible errors in the advertisement: Despite careful preparation of this listing, occasional errors may occur in the text or information provided. We assume no liability for mistakes, changes, or prior sale. All information is subject to change and not guaranteed. Please contact us to verify details or if you have any questions.

Condition: new, Year of construction: 2025, functionality: fully functional, Technical Data: Cutting height: 200 mm Cutting height at 45° incline: 140 mm Tiltable to the left up to 67° Tiltable to the right up to 45° 5 kW hydraulic feed brake (optional) Cutting length: 420 mm at 90° position Cutting length at 45° swivel: 295 mm Tilt angle: left 60°, right 30° Tilt adjustment from the front via hand crank. 1 wood saw blade, diameter 520 mm 1 heavy-duty cross-cut roller conveyor, length 6,000 mm, mounted on the left. The stop is adjusted from the front via handwheel. Length is digitally readable to the millimeter. The stop is pneumatically locked. 1 digital readout (230 V version) 1 heavy-duty feed roller conveyor, right side, length 4,000 mm Machine length: 11,700 mm Fully mobile Machine packed on wooden planks Cpodpen R A Ewofx Ac Nju Images show a customer’s machine. Available upon request also with 215 mm or 240 mm cutting height.

Condition: used, mileage: 1,200 km, power: 110 kW (149.56 HP), first registration: 05/2025, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 05/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 6,250 mm, total width: 2,000 mm, total height: 3,150 mm, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, crane, electronic stability program (ESP), soot filter, tail-lift, 0567. GW25N336771, Furniture lift Böcker Agilo 27/1-6 LH, guide rail package, auxiliary drive, furniture slider, telescopic headrest wheels, Maxi furniture platform, enclosed loading area, electric controls, additional installation of extendable front supports, facade protection plank, hydraulic latch lock, reversing camera, turn assist, active brake assist, reinforced front axle, radio, air conditioning, lane departure warning, intelligent speed assistant, toolbox. Subject to errors and prior sale. Cpjdpsxtvzzofx Ac Neu

Year of construction: 2011, condition: excellent (used), TIMA VOLLALU universal transporter with tilting loading area Type: GTAHK 360/188/3.5 Internal dimensions: 3500x1880x300mm Total weight: 3500kg Payload: 2800kg Own weight: 700kg Tyres: 155/70 R12C Year of construction: 2011 Certificate valid until 07/2022 VOLLALU - trailer with tipping loading area Frame welded in hollow profile construction Aluminum plank floor Double-acting hydraulic cylinder for tilting function spare wheel mounted 8 pcs. lashing eyes Cpsdpfxshwmr Hj Ac Nju

Condition: good (used), Year of construction: 2003, functionality: fully functional, Length of sliding table: 3,000 mm Cutting width at rip fence: 1,000 mm Cutting height with blade diameter 450 mm: 75 - 150 mm Cutting height with blade diameter 350 mm: max. 100 mm (each at 90-degree blade position) Double carriage on steel round guides, no Pertinax Reinforced main saw motor: 7.5 kW Maximum saw blade diameter: 450 mm Height adjustment of the saw unit via dimension input on the control panel Motorized tilt adjustment of the saw unit via dimension input on the control panel Supplied with newly installed 350 mm saw blade Cjdpex Dax Esfx Ac Nopu 2-axis scoring saw unit, can be set in the control system to desired height and alignment relative to the main saw blade Scoring unit automatically lowers below table level when not in use Adjustment of the scorer can be done while the machine is running RAPIDO scoring saw blade – simplifies scoring width adjustment, set up in max. 3 minutes Adjustment range: 2.8 – 3.8 mm Additional accessories: - Mitre fence extendable to 3,200 mm, with 2 foldable stops - LASER cutting line indicator, e.g. for trimming cuts on solid wood planks

Condition: used, maximum load weight: 23,000 kg, overall weight: 29,500 kg, axle configuration: 2 axles, first registration: 06/2013, Year of construction: 2013, Equipment: ABS, ORTHAUS JXL010 JUMBO Special Curtainsider/Tautliner High Volume with 107 m3 ----VEHICLE EQUIPMENT * ORTHAUS JUMBO JXL010 TAUTLINER * CUBIC CAPACITY: 107 m3 * FIFTH WHEEL HEIGHT: 940 - 1,020 mm * SAF AXLES * GALVANIZED FRAME * TYRE SIZE: 245/70 R 17.5 * WABCO BRAKING SYSTEM * GOOD TIRES * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 ---- Technical Specification: Axles: SAF axles with drum brakes, first axle liftable. Coupling Height: 940 - 1,020 mm GALVANIZED FRAME Tyres: 9 units of 245/70 R 17.5 tires on steel rims. Brake System: WABCO 2S/2M EBS system including ABS and Roll Stability Program function. Codew E Av Eopfx Ac Nspu Landing Leg: Jost-brand landing legs. Lighting Kit: Aspöck 24 Volt Floor: 30 mm resin-coated plywood planks. Suitable for forklift loads up to 7,000 kg. Lashing: Lashing rings with 2 ton capacity, 13 lashing rings on each side. ---- Changes, errors, and prior sale reserved! Further vehicles can be found on our homepage. Sale is exclusively subject to our General Terms and Conditions (GTC) – see homepage. Important Notice: Despite carefully checking all details in our offer, mistakes can occur. Some errors may be caused by data transmission across various platform providers. Therefore, we emphasize that all information is provided without guarantee and does not represent a legal claim. Legal Notice: This sales advertisement does not constitute an offer in the sense of §145 BGB. Rather, it is information for initiating a contract. The details given here are non-binding and do not constitute guaranteed properties.

Condition: used, empty load weight: 2,645 kg, maximum load weight: 7,855 kg, overall weight: 10,500 kg, axle configuration: 3 axles, first registration: 04/2012, loading space length: 5,200 mm, loading space width: 2,400 mm, loading space height: 400 mm, color: silver, Year of construction: 2012, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * 2nd hand * Condition: see photos * Body: 2-axle tandem low-loader * Body dimensions: Length 5,200 mm x Width 2,400 mm x Height 400 mm * Robust, welded and hot-dip galvanized frame for optimum stability and safety; drop sides made of anodized aluminum, foldable and removable at the sides and rear, insertable corner posts at front and rear * Heavy-duty galvanized steel ramps, laterally adjustable, ramp surface made of softwood flooring, gas shock absorber ramp assist. 3 meters total, divided into 1.6 meters and 1.4 meters * Central tube with screw-type towing eye Ø 40 mm, galvanized, continuously adjustable via crank * EBS brake system with spring-loaded brake actuator * BWP axles with drum brakes * Air brake system with release valve, automatic load-dependent braking * ABV system with spindle handbrake * Recessed lashing points in the platform floor * Floor covering made of 40 mm softwood planks * Reinforced 12 t gear support winch with load and fast speed modes * Full LED rear lights * Beacon * GVW 10,500 kg * Unladen weight 2,646 kg Cpodpfxex Emgbe Ac Nju * Payload 7,854 kg If you require a new TÜV inspection, we would be happy to provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV test, a new SP inspection, or a new UVV inspection. You will find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend inspection and testing of the goods to avoid misunderstandings regarding the condition and suitability for the buyer. Viewings and inspections are possible at any time by prior appointment and are expressly encouraged. All details are subject to change and provided without guarantee. We do not accept liability for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to alteration, prior sale, and errors.

Condition: used, maximum load weight: 26,827 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 16,240 mm, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer KSLA RJ Mega Jumbo Low Loader with Wheel Wells and Excavator Boom Recess Hardly Used Immediately Available Including Winch TECHNICAL SPECIFICATIONS: * Fifth wheel height (H5): approx. 950 mm * Rear swinging door: 2,300 mm * Overall length (L): 13,190 mm * Gooseneck length (Gl): 3,950 mm * Platform length (Pl): 9,240 mm * Extension (Pe): 3,500 mm * Locking position: 500 mm * Platform height (Ph): 770 mm * Wheelbase (Wb): 7,800 mm * Axle spacing (A): 2,260 mm * Axle load: 24,000 kg * Axles: 12 tons technical load capacity (10 tons permissible load capacity) BPW * Axles with drum brakes * Axle load: 8 tons load capacity * King pin capacity: approx. 15,000 kg * Unladen weight ±3%: 12,173 kg * Overall width (W): 2,550 mm + 600 mm (with extendable sides) * Sliding platform: Not included * Total weight (at 80 km/h): 39,000 kg * Total weight (at 60 km/h): 42,900 kg RUNNING GEAR: * Number of axles: 3 * Steering type: 2 x rigid axles at the front, 1 x trailing axle at the rear * Lift axle: Overload-dependent manual axle lift system on the 1st axle * Lift axle control: Manual * Wabco braking system * Tyres: 12 x 205/65 R17.5 * 1 x spare wheel holder on front bulkhead * Air suspension, 1 x load gauge indicating pressure at the axle assembly * NATO socket CHASSIS: * S700 MC Codpfsxy Ddksx Ac Nopu * Gooseneck with 90° vertical corners * 45 mm hardwood floor and steel floor with embossed pattern above the wheel wells only * Galvanized extensions 8 x 2 for enlarging the platform width up to 300 mm * Jost landing gear, 50 tons * Foldable rear supports, 45 tons * 2 pairs of wheel wells for transporting wheeled vehicles * Wheel well bridge for covering the wells RAMPS: * Ramp loading capacity: approx. 40 tons * Suitable for hydraulic folding and adjustment * Wooden floor, 40 mm thick, 3,070 mm long, 850 mm wide, 3,715 mm high (closed), ramp angle 14°, capacity 40 tons * Rear ramp safety: Ramp protection chain included LOAD SECURING: * Lashing rings: 2 x 2 x 5,000 daN capacity, 1 x 2 x 10,000 daN capacity rings on gooseneck; 3 x 2 x 5,000 daN, 4 x 2 x 10,000 daN rings on the outer platform; 2 x 2 rings with 8,000 daN capacity under the outer frame; 4 x 2 rings with 6,000 daN capacity at the tray area included * Stake pockets: 5 x 2 stake pockets (52 x 102 mm) * 6 x container lock housings and 4 x twistlock container locks for transporting 1 x 20FT or 1 x 30FT containers * Gooseneck panels: 1 x steel front plate (450 mm x 2,550 mm), 2 x aluminum side panels (360 mm x 1,500 mm), 1 x aluminum rear panel (360 mm x 2,550 mm) * Plug-in stakes: 8 x 2 units, 50 mm x 100 mm ACCESSORIES: * 1 x PVC-coated steel toolbox (single lid) 750 x 400 x 360 mm (H x D x W) * 1 x rotating beacon * 1 x work light on underrun guard * Oversize boards with LED lighting 2 x 2 units, 423 mm x 423 mm * Storage box on gooseneck (600 mm x 830 mm x 2,310 mm) * Timber planks for oversize transport * Chassis color: RAL 3020 Traffic Red For further information, please do not hesitate to contact us.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2017, next inspection (TÜV): 03/2026, Equipment: ABS, Stas S300ZX Moving Floor Trailer 90 m³ * 90 m³ capacity * SAF axles * 1st and 3rd axle liftable * Air suspension * Pneumatic control * Disc brakes * Rolling tarpaulin * Smartboard * Double-wing rear door with rotary bar lock * Access ladder and platform at the front wall * ABS connector * 2 x 7-pin electrical connection * ISO pneumatic couplings with red and yellow coupling heads Cpodpfx Acsxycilo Neu * 21 planks * Lashing rings on the sides of the loading area * Foldable rear light guards * Load pressure gauge Subject to prior sale and errors excepted! Sale exclusively according to our Terms and Conditions. Important Notice: Despite thorough checking of all details in our offer, errors may occur. Some are caused by transmission faults from various platform providers’ systems. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it contains information for initiating a contract. All details given are without guarantee and do not represent warranted characteristics.

Condition: new, overall weight: 80,000 kg, axle configuration: > 3 axles, Equipment: ABS, More vehicles available – excerpt from the equipment specification. Full specification upon request. GOOSENECK Gooseneck in SNT design to optimize cargo bed length, approx. 3,700 mm long, rear with a beveled section approx. 1,000 mm x 10°. For tractor units: 4x2, 6x2, and 6x4. - Plug-in steel front wall, approx. 400 mm high - ASPÖCK-UNIBOX mounted at the front control panel with 24N, 24S & 15-pin sockets - 3 kW electro-hydraulic unit for controlling hydraulic functions, except hydraulic winches - Outer beams of the gooseneck with mounting holes for boltable lashing rings. First hole approx. 200 mm from front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) - On the gooseneck: 1 pair of plug-in side ALU drop-sides, approx. 400 mm high, anodized finish - On the gooseneck: 1 plug-in rear ALU drop-side, approx. 400 mm high, anodized finish - Approx. 40 mm hardwood flooring on the gooseneck, over the kingpin chequer plate Cpjdpfxjxarmaj Ac Nou - 3.5-inch kingpin - Gooseneck guide plate for saddle plate, approx. 500 mm wide - Round NATO socket on the front connector panel (Maeler & Kaege VG 96 917) - 2 pairs of lashing rings with retaining spring, suspended from outer beams of the gooseneck (LC 5,000 daN) CARGO BED Extendable cargo bed, length approx. 8,800 mm with rear bevel approx. 500 mm x 10°. Pneumatic locking with conical locking pin and reinforced positions; supply lines are protected inside the extendable beams and automatically adjust to cargo bed length. - BPW axles and suspension: first axle self-steering, all others hydro-mechanical forced steering. First axle with electro-magnetic reverse lock, activated via reverse gear or manually. Technical axle load: 12,000 kg each. Air suspension with lift/lower valve. - 235/75 R 17.5 3PMSF twin tires – brand at our discretion - Mechanical landing gear with 2-speed gearbox and crank. JOST Module B – static test load = 50,000 kg - Cargo bed with continuous and between-axle interrupted approx. 50 mm hardwood floor (increases friction coefficient) - Elongated holes for hanging and movable bridging elements: - At front of cargo bed - 1 movable intermediate platform, approx. 300 mm wide, for extension tube with large cross-section, with chequer plate - Front and rear with elongated holes for hanging/movable bridging elements - 1 pair of lashing rings on front cross-member (LC 10,000 daN) - 7 pairs of recessed lashing rings in the outer frame, foldable to the outside (LC 10,000 daN) - Extendable (galvanized) bed wideners approx. 230 mm per side (without wood planks) - 1 pair of mechanical rear stabilizers - Steering from front and rear adjustable via remote cable control, with single-axle steering alignment, no installation in tractor unit - TPMS tire pressure monitoring sensors installed on all wheels - Bed locking with conically welded lock profiles every 500 mm - Lock monitoring left and right on the trailer - For the intermediate platform, approx. 300 mm wide: mechanical lock to secure the platform on the extension - 5 pairs of threaded blocks on the extendable beam for mounting boltable M20 rings (LC 5,000 daN) BRAKE SYSTEM Brake system

Condition: new, axle configuration: > 3 axles, total length: 17,700 mm, total width: 2,990 mm, total height: 3,810 mm, suspension: hydraulics, tire size: 245/70 R17.5 Double Fitted (143/141J), color: red, Year of construction: 2024, Equipment: tail-lift, Color: Red Payload: 100,250 kg Weights: Kingpin load: 38,000 kg Axle load: 12,000 kg Total axle load: 96,000 kg Gross vehicle weight (GVW): 134,000 kg Unladen weight: 33,750 kg Payload: 100,250 kg Axles: Axle brand: BPW ECO PLUS Hydraulic suspension 7 steering axles (axle 2 fixed) First two axles are liftable Drum brakes ABS SN 3020 brakes, with sensors Tyres: 245/70 R17.5 twin tires Load index 143/141J Dimensions: Length: 17,700 mm Extensions: 19,500 mm Max. extended length: 37,900 mm Loading deck width: 3,990 / 3,450 mm Loading deck height: 1,050 mm +/- 150 mm Height: 3,815 mm Additional equipment: NATO plug Hydraulically foldable ramps Outriggers and planks for widening the loading platform Electro-hydraulic pump for trailer functions Spare wheel with holder Work lights Rear bumper with lights 2.0” kingpin Central greasing system Lashing rings Wooden loading platform Oversize load marker boards Remote control General information Year of manufacture: 2024 Axle configuration Tyre size: 245/70 R17.5 twin tires (143/141J) Axle brand: BPW ECO PLUS Brakes: drum brakes Suspension: hydraulic suspension Rear axle 1: Twin tires; lift axle; max. axle load: 12,000 kg; steered; tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axle 2: Twin tires; lift axle; max. axle load: 12,000 kg; tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axles 3–8: Twin tires; max. axle load: 12,000 kg each; steered; tyre tread all positions: 100% Weights Unladen weight: 33,750 kg Payload: 100,250 kg Gross vehicle weight: 134,000 kg Functional Loading platform height: 105 cm Extendable body: Yes Condition General condition: very good Technical condition: very good Optical condition: very good Codpfxeuu E Tie Ac Njpu Financial Information Price: on request Further information Please contact Stefan Schaapveld for more details...

Condition: good (used), Year of construction: 1996, functionality: fully functional, KRÜSI Chalet Building Machine / Log House Production Line Type CM 40 POS 1: Motor driven roller conveyor working width 400mm, stepless feed speed 2,0 kw motor, length 6000mm POS 2: Longitudinal cutting saw diameter saw blade 400mm Pneumatic feed of the saw depth Main motor 4,0 kW POS 5: KKRÜSI RÜSI chalet building machine / log house finishing machine type CM 40 Machine-No.431 Year of manufacture 1996 Sawing unit: Manual feed spindle adjustment with analog dimension display CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display Drilling unit: Manual feed Spindle adjustment with analog dimension display Face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display POS 6: Motor driven roller conveyor Csdpfx Acjhw N Nps Nspu working width 400mm, stepless feed speed 2,0 kW feed motor length 12000mm 9 pcs. stop flaps, adjustable, pneumatically controllable 10 pieces sideshift for material transfer POS 7: assembly table 4.400mm x 12.000mm Manufacturer: Sweden Year of manufacture approx. 1985 Assembly table for further processing of the manufactured log house planks. 4 chain hoists for cross transport gear motor with 4,0 kW

Condition: new, maximum load weight: 23,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available units on our website. Selection of equipment features. Full equipment specification available on request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * Approx. 2,100 mm = raised front platform incl. gooseneck, corners beveled * Approx. 5,350 mm = low-bed deck – level loading area * Approx. 850 mm = rear ramp slope * Overall width approx. 2,550 mm (or up to approx. 3,000 mm with extensions) * Loaded loading height approx. 870 mm * When assembling a combination, please observe the legally permitted overall height and total length. Frame: * Steel welded construction with front gooseneck and rear bevel * Rear ramp slope with central excavator shovel recess = rear recess between longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing points (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, pull-out 10 t lashing rings (4x in the low-bed, 1x on the ramp slope, 2x on the raised platform) * Standard ball bearing turntable Frame Attachments: * Both sides of the low-bed deck with extendable width extensions with approx. 50 mm softwood planks (track width of construction machinery to be transported must not exceed the outer frame width of approx. 2,550 mm) * 4 pairs of folding approx. 10 t lashing rings, distribution: 1 pair at the front on the raised platform, between the longitudinal beams; 1 pair at the very rear in the excavator shovel recess, left and right; 1 pair at the front of the raised platform before the gooseneck, between the longitudinal beams; 1 pair in the rear low-bed ahead of the ramp slope, in the shovel recess left + right Towing Device: * Fixed drawbar with swivel towing eye approx. 40 + 50 mm, cranked version, silent bush mounting, drawbar retaining spring with tensioner * Truck coupling height approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support Device: * 2 automatic folding supports at the rear Axles: * 3 SAF air suspension low-loader axles with drum brakes * Load capacity: 11 t per axle * S-cam drum brakes approx. 300/200 mm * Automatic brake slack adjusters Cpodpfxjwx Dcyj Ac Nju Wheels: * 12 tires 235/75 R 17.5, 141J, brand per factory selection * 12 steel rims 6.75 x 17.5, with preset offset, silver Brake System/Suspension: * Dual-line compressed air brake system according to ECE directive R13 * Brake system by Wabco * EBS system 4S3M, 1st and 2nd axles with sensors * RSS/RSP – stability control * Spring-actuated parking brake on 2nd and 3rd axles * Steel air tank * Brake/air supply lines with two single coupling heads, yellow/red * EBS/ABS connection cable * Retainer rubber for EBS and electrical connectors * Air suspension with lift and lowering device (rear axles only), automatic ride height adjustment from 15 km/h (RTR), front axle mechanical stop Floor: * Approx. 50 mm impregnated softwood flooring, protruding approx. 5–10 mm above upper edge of frame, steel checker plate cover over the wheels Ramps: * 2 foldable single-piece lightweight steel drive-on ramps, approx. 2,800 mm long, approx. 750 mm wide, with impregnated hardwood inserts approx. 35 mm * Ramp spacing adjustable from approx. 350 mm up to max. total width of approx. 3,000 mm * Ramps lockable in driving position by chains with tensioners * Ramp lifting aid with spiral spring * Ramps laterally adjustable manually with bar * Square ribs welded on the

Condition: used, 1 Pair of Transport Rollers, Platform Trolleys, Transport Carts GORR Load capacity per roller: 1,000 kg Platform size per roller: 1050 x 255 mm Platform (support plate) thickness: 4 mm Overall height: 145 mm Roller diameter: 100 mm Roller width: 37 mm Load capacity per swivel castor: 300 kg - Each roller equipped with 4 swivel castors with white polyamide wheels, bolted to the support plate - Each roller is fitted with two castors with brakes - Steel support plate with reinforced edge serves as the platform surface Dimensions L x W x H: 1050 x 265 x 145 mm Net weight per roller: 17 kg Net weight for both rollers: 34 kg Very good condition Price is per pair = 2 heavy-duty transport skates Scope of delivery: You will receive 2 of these universally and multi-purpose heavy-duty rollers. Cpodpfx Acexcixle Nju Currently, 50 pairs in stock. Both rollers together are fitted with 8 castors and can carry up to 2 tonnes in total. Our customers use them to transport squared timber, boards, planks, and sawn timber. Other users move beams, girders, and heavy pipes within the workshop. Also suitable for transporting electrical cabinets, control cabinets, heavy tables, and furniture. Ideal as machine skates, material dollies, or machinery transport units.

Condition: like new (used), Year of construction: 2012, Longitudinal profiler solid wood floorboards JOEMA 450 edit solid Wood Planks longitudinally width max. 450 mm right side 2 electric motor je 7,5 kW left side 2 electric motor je 7,5 kW Cedpfx Ajduw Aujc Nepu Feed gear motor 3.0 kW toothed transport chains for safe transport Solid wood floorboards, chateau floorboards, floorboards

Condition: ready for operation (used), Year of construction: 2022, operating hours: 770 h, functionality: fully functional, type of input current: three-phase, overall weight: 6,800 kg, input voltage: 230 V, total height: 2,300 mm, total width: 12,300 mm, total length: 11,900 mm, nominal power: 5.5 kW (7.48 HP), secondary voltage: 400 V, number of previous owners: 1, compressed air connection: 6 bar, number of tool turrets: 4, Equipment: CE marking, documentation/manual, This Custom-made production line is designed for the fully automated manufacturing of wooden garden screens from individual planks. Both the screen planks and the intermediate slats are manually loaded into designated magazines, after which the Cpsdpfsxu A Udjx Ac Neu machine takes over the entire production process. - Automatic discharge and stacking of finished screens - Tiltable stacks for efficient handling - Configured to produce 5 different screen types - Last maintenance: June 2025 - Documentation available: user manual, spare parts list, technical drawings - Additional accessories available for producing other screen types We are selling this machine due to a strategic reorientation of our business. It is in excellent condition, fully operational, and ready for immediate use.

Condition: used, axle configuration: 3 axles, first registration: 02/2021, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,675 mm, loading space volume: 87 m³, Chassis Manufactured in a self-supporting aluminum construction with corresponding reinforcements in the lower chord for particularly high stability and strength, unit chassis made of aluminum, 140 mm frame height! (max. 39 tons) Axles and suspension: 22.5-ton disc brakes Jost axle assemblies, 3 x 9-ton with DC air suspension, ken, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axles separately liftable with traction control (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension Tires and wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice on Alcoa aluminum rims, satin, 11.75x22.5 ET120 Seatposts Aluminum drop-lift supports, Alu Leg, with 2x10-ton drawbar load; we use swivel feet for the air suspension Braking system according to E.G. Standard, dual-line braking system, Wabco EBS system with RSS (Roll Stability Support) system, spring-loaded braking system acting on two axles with rear controls, aluminum air chamber system, premium modulator Electrical system Compliant with the German Road Traffic Licensing Regulations (STVZO) guidelines with two Aspöck Europoint III LED five-chamber lights integrated into the aluminum rear end, 24-volt system with one 15-pin and two 7-pin sockets, with LED side marker lights, two separate LED work lights at the rear, and two LED work lights on the sides. At the height of the seat posts, 1 LED work light inside, front left, can be operated from the outside. Body/Trough "Fully welded body" Cpodpfx Aoxuy I Ijc Nju Front wall load 17,250 kgf/cm², rear and side walls 10,250/13,400 kgf/cm², aluminum body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper chords, plank profiles fully welded inside, floor as a moving floor system on 140 mm aluminum cross members, cross members mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profiles, 2-3 mm thick, straight design, special aluminum corner profiles, smooth rear wall, straight design, with two aluminum wing doors, 50/30 mm thick, with 4 espagnolette locks in the welded-in design. Aluminum rear frame mounted on Teflon bearings and stainless steel bearings, a sliding aluminum wall suspended from the reinforced aluminum top chord with a Kevlar tarpaulin for complete emptying, side brush seals and an additional Kevlar tarpaulin, an integrated grain hopper with a cover plate, operable from the outside with a viewing window at the rear left, and two test slides in the rear doors. "Cargo Floor" 24-Board Hydraulic System Moving floor system in the floor with hydraulically operated aluminum profiles mounted on square aluminum profiles with approximately 880 PE-HD sliders, approximately 6 mm smooth floor, hydraulics with approximately 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves of a size and design to be specified, operating pressure 190 - max. 240 bar, aluminum End pieces welded into the floor, rear left control with remote control in a lockable, waterproof box, without hydraulic hoses. Accessories PVC fenders with rubber mud flaps, aluminum spare tire holder, folding aluminum side bumpers, 1 plastic toolbox approx. 800x460x430 mm, approx. 3.7 m aluminum ladder, 680 g/m² roll-up tarpaulin with a roll-up tarpaulin system including a

Condition: used, maximum load weight: 57,900 kg, overall weight: 73,000 kg, axle configuration: > 3 axles, first registration: 06/2024, next inspection (TÜV): 07/2026, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpts from the equipment list. Complete specifications available upon request. Gooseneck: * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm in length * Rear of the gooseneck with bevel of approx. 1,000 mm x 10° * Technical fifth wheel load: 30,000 kg Suitable for tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading platform: * Telescopic loading platform, approx. 8,800 mm in length, with rear ramp approx. 500 mm x 10° Axles and suspension: * BPW axles and suspension * 1st axle steered, equipped with electromagnetic reverse lock; all other axles hydro-mechanically forcibly steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tyres: * 235/75 R 17.5 3PMSF twin tyres, load index 143/141J (144/144F) Brake system: * WABCO EBS-E braking system, compliant with EU regulations Paintwork: * Trailer colour: RAL 3002 Carmine Red Accessories included: * Removable steel front wall, approx. 400 mm high * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches; without installation of power connections on the tractor unit * Stowage position on the gooseneck for warning signs when not in use * 1 mounting adapter for spare wheel in front of the gooseneck front wall (without spare wheel) * Outer carrier on the gooseneck with fixing holes for bolt-on lashing rings. First hole approx. 200 mm from the front, then at approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings in the rear area of the gooseneck (LC 10,000 daN) * On the gooseneck, 1 pair of removable ALU sidewalls, approx. 400 mm high, anodised * On the gooseneck, 1 removable ALU rear wall, approx. 400 mm high, anodised * Approx. 40 mm thick hardwood flooring over the gooseneck, checker plate over the kingpin * 2" kingpin * Mechanical landing gear with 2-speed gearbox and crank, JOST Modul B * On the loading platform: continuous and axially interrupted approx. 50 mm thick hardwood flooring * Platform locking with conically welded locking profiles approx. every 500 mm * Slotted holes for hook-in and repositionable bridging elements: at front of loading platform * 1 sliding intermediate table, approx. 300 mm wide, for the high cross-section telescopic tube with checker plate surface; front and rear with slotted holes for hook-in and repositionable bridging elements * 1 pair of lashing rings on the front crossmember (LC 10,000 daN) * 7 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outwards (LC 10,000 daN) * Extendable galvanised platform widenings by approx. 230 mm per side (without wooden planks) * 1 pair of mechanical rear supports * Rear steering from front and rear operable via cable remote control with buttons, with single-track axle alignment, without installation in tractor unit * Cable (approx. 35 mm², approx. 3.5 m long) with connectors (NATO-NATO) between trailer and tractor unit for supplying the electro-hydraulic unit and/or electric winch * 2 additional pairs of bolt-on lashing rings (LC 5,000 daN) Csdpfxexuypro Ac Nepu * 1 one-piece INOX tool box, approx. 2,480 x 340 x 390 mm (L x W x H), straight design, with 2 external side doors and 1 top lid, located behind the front wall

Condition: new, mileage: 10 km, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 2, loading space volume: 21 m³, loading space length: 4,200 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Welcome to carmax24 Today you have the opportunity to purchase one of our select, inspected vehicles. Expert-inspected, high-quality vehicles ensure high customer satisfaction, and have done so since 2008. This is our daily approach, because you, the customer, are our top priority at carmax24. RENT-TO-OWN * LEASING * FINANCING AT TOP CONDITIONS Iveco Daily 35S18HA8, Model Year 2025, Year of Manufacture 2024 8-Speed Automatic Transmission, 3.0-Liter Diesel, 176 HP Driving safety is ensured by the following systems: ESP 9 - stabilizes the lane and prevents drifting in curves, ASR - prevents the drive wheels from slipping when starting off on slippery surfaces, ABS - prevents individual wheels from locking when braking, EBD - brake assist system (EBD) Distributes braking force between the front and rear axles. Hill Holder prevents the vehicle from rolling when starting on an incline. MSR prevents the drive wheels from locking due to engine braking when the accelerator is suddenly released or downshifting improperly. HBA increases pressure in the braking system during sudden braking. LAC detects load distribution on individual axles. TSM reduces trailer sway. RMI&ROM systems prevent the vehicle from rolling over and losing stability. Passive passenger safety: Driver airbag. COMFORT PLUS PACKAGE ? 79297 Fully padded headrests, Daily logo ? 00259 Suspended, comfortable driver's seat ? 01605 10-inch screen with NAVIGATION ? 75082 Fixed 2-seater passenger bench with folding table, 3-point seat belts ? 06650 Cabin ventilation and heating system with automatic air conditioning ? 01611 USB socket with charger ? 14522 ACC Active Cruise Control with radar sensor ? 06555 Front fog lights ? STYLE PACK 3.55 79336 Daily grille with chrome stripes 01553 Gun metal emblems 02443 Leather-wrapped steering wheel 02308 Daily aluminum wheels 72625 LED lights (daytime running lights, low beam, street lights) ? Reinforced double parabolic springs for S models ? Mirrors up to 2.35 m wide CONSTRUCTION: Codjvhy A Nopfx Ac Nepu Internal dimensions approx.: Length. Width x Height (mm) approx. 4,200 x 2,200 x 2,300 mm - Height flush with the cabin Tarpaulin color: RAL 5013 - Cobalt Blue Base vehicle: Iveco Daily 35S18, single cab, right-hand side 4100 mm Standard MaxTrans aluminum box specifications: 108 mm aluminum frame auxiliary profile, 70 mm aluminum frame cross profile, anodized frame, 70 mm perimeter profile, 15 mm non-slip plywood floor Front/rear fixed posts: 133 mm black anodized aluminum, 400 mm anodized front wall + additional 1250x15 mm plywood panel 400 mm anodized monolithic sideboard, finished with cassette sideboard closures, completed with a 400 mm monolithic sideboard with a rear-mounted step, forged steel, stainless steel hinges (stainless steel hinges) for the side and rear walls Side divider and removable steel center post for a build-out length of 3800 mm or more One pair of mobile load securing points in the edge profile per meter of construction Mounted Aluminum tarpaulin frame, four rows of aluminum tubes in the roof Three rows of pockets under the planks, tarpaulins with wooden boards, road-compliant lighting, fender set with mud flaps, skylight, LED lighting in the cargo area, tarpaulin attached with EXPANDERS Additional: Frame extension for this construction area

Condition: like new (used), total length: 4,000 mm, total width: 2,500 mm, total height: 665 mm, color: blue, Operating conditions: The trailer is designed for use on level, paved surfaces in internal company transport. The trailer components are not designed for combined operation with multiple trailers in a train. Payload: 10 t at 6 km/h with evenly distributed load (surface load) on the loading area between the axles. Point or strip loads are only permissible upon prior notification. Loading area: Dimensions approx. 4000×2500 mm, loading height approx. 665 mm, loading surface covered with softwood planks, all-round edge protection. Main frame: Robust welded construction made of profile steel sections. Steering: Cjdpfsxrtqwox Ac Nspu Four-wheel kingpin steering, drawbar can be raised, removed, and swapped from front to rear. Coupling height at towing vehicle approx. 350–600 mm (other coupling heights only permissible upon prior notification), towing eye according to DIN 74054, Ø 40 mm, drawbar drop guard according to accident prevention regulations (UVV). Running gear: Both axles steered, super-elastic tyres 21×8-9 (approx. 517×186 mm), wheel hubs with tapered roller bearings and lifetime lubrication. Paintwork: Topcoat RAL 5002 ultramarine blue