Used Planer Blades for sale (6,188)

Condition: excellent (used), CATALOG NUMBER 7665 Technical data: - Shaft width: 510 mm - Planing shaft (2 knives installed), 4-knife shaft - Maximum thickness of material for thicknessing: 200 mm - Maximum thickness of workpiece on side heads (3-sided): 100 mm – From above: - Anti-kickback fingers - Serrated feed roller - Planing shaft - Pressure beam - Smooth outfeed roller – From below: - Adjustable rollers in lower table: 2 pcs - Guide bar - Lateral pressure from the side – From the rear: - 2 side spindles + pressure units - Spindle height: 100 mm - Maximum spindle spacing: 510 mm - Spindle diameter: 30 mm - Spindle adjustment: left/right Gbjdjytf Nvspfx Acwjk - Motor: 2 × 1.5 kW - Two feed speeds - Main motor: 7.5 kW - Extraction port: 2 × 100 mm - Overall dimensions (L/W/H): 1800 × 1250 × 1000 mm - Weight: 1,070 kg ADVANTAGES – Made in Poland – 4-knife shaft – Very good condition – Used planer Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may be subject to change)

Condition: excellent (used), Catalogue number: 7275 TECHNICAL DATA - Max. planing width: 610 mm - Max. planing height: 200 mm From above: - Toothed feed roller - Kickback pawls - 2 pressure rollers - Toothed feed roller - Pressure roller - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure rollers Gbsdoytdkxepfx Acwok - Smooth feed roller From below: - Guide bar - Adjustable infeed table with split, smooth sliding shaft - 610 mm planing shaft, 4-knife, 5.5 kW - 2 smooth, powered feed rollers - Side pressure roller At the rear: - Side spindles + 2 pressure rollers: 1) Right vertical spindle, 5.5 kW 2) Left vertical spindle, 5 kW - Max. planing height on side spindles: 200 mm - Spindle diameter: 35 mm - Spindles adjustable up/down, left/right 3) Additional horizontal spindle, 160 mm, adjustable up/down and left/right + tilting, approx. 4 kW - Planing possible with the additional spindle from above/below/side - Spindle diameter: 35 mm - Adjustable rollers on lower table - 2 feed speeds - Feed motor: 2.2 kW - Extraction port diameters: 120 mm - Dimensions (LxWxH): 2550 x 1700 x 1350 mm - Approx. weight: 3,000 kg ADVANTAGES - Wide planer for wet and dry timber - Ideal for processing beams, floorboards, etc. - 2 horizontal planing shafts + 2 vertical spindles + 1 horizontal spindle - Complete with cutterheads - Manufactured by German brand KUPFERMUHLE - Used planer in very good condition - Original photos Net price: 58,900 PLN Net price: 14,020 EUR (based on exchange rate €1 = 4.2 PLN) (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7620 TECHNICAL DATA - shaft width: 410 mm - table length: 2220 mm - cast iron tables - both tables adjustable - original cast iron fence - motor approx. 3kW - dimensions (L/W/H): 2220x800x1140 mm - weight: 504 kg ADVANTAGES – German-made – used jointer – in very good condition Net price: 6900 PLN Net price: 1640 EUR based on 4.2 EUR rate Godpfx Aoyi Tn Sscwebk (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7776 TECHNICAL DATA - Shaft width: 520 mm - 4-knife cutter block - Noise-reducing comb - Shaft guard - Table length: 3010 mm - Longer, electrically adjustable infeed table: 1770 mm - Cast-iron tables - Both tables adjustable - Original cast-iron fence, angle adjustable - Electric brake - Extractor connection diameter: 120 mm - Motor: 4 kW Godpfx Acsyi Twmjwobk - Dimensions (L/W/H): 3010x1000x1400 mm - Weight: 870 kg ADVANTAGES - Italian production - 4-knife cutter block - Overhead control panel - Electric brake - Noise-reducing comb - Longer infeed table - Not repainted - Used surface planer, very good condition, original DTR documentation, CE Net price: 28,900 PLN Net price: 6,880 EUR (based on 4.2 EUR rate) (Prices may vary with significant fluctuations)

Condition: good (used), Year of construction: 2002, functionality: fully functional, Initial commissioning: 2002 Control: Heidenhain iTNC530 Machine hours: to follow X-axis: approx. 6,000 mm Y-axis: approx. 3,500 mm Z-axis: approx. 1,100 mm A-axis: C-axis: Godpfxoyzz R Hj Acwobk 2-axis milling head Spindle speed: max. 14,000 rpm Additional equipment - Double-sided enclosure Machine condition Fully functional, in very good condition. Machine remains powered and is available immediately.

Condition: excellent (used), CATALOG NUMBER 7219 TECHNICAL DATA - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm Number of spindles: 4: 1) Bottom horizontal: 200 mm, 5.5 kW 2) Right vertical: 150 mm, 4 kW 3) Left vertical: 150 mm, 4 kW 4) Top horizontal: 200 mm, 5.5 kW - All heads adjustable up/down, right/left - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm Gbodpfx Asyi T Niecwjk From above: - 6 driven infeed, serrated rollers (including 2 double rollers) - 1 driven outfeed, rubber-coated, double roller From below: - Driven, serrated infeed roller, swiveling on lower table - 3 lateral pressure units - Driven, smooth metal outfeed roller - All rollers pneumatically pressed - Infeed table length: 2,130 mm - Table height adjustable - Centralized lubrication - Electric thickness adjustment - Lifting motor: 1.1 kW - Infinitely variable feed speed - Feed motor: 3 kW - Feed via Cardan shafts - Fully enclosed in soundproof cabin - Extraction connection diameters: 4 x 130 mm - Dimensions (LxWxH): 3,650 x 1,750 x 1,800 mm - Weight: approx. 3,000 kg ADVANTAGES – 4-head configuration – Ideal for both wet and dry wood – Full technical documentation (DTR) – Used machine, in very good condition Net price: 68,900 PLN Net price: 16,400 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number: 7894 TECHNICAL DATA - Min / max working width: 20 / 165 mm - Min / max working height: 8 / 100 mm 4 spindles: 1) Lower horizontal, 165 mm, 4 kW 2) Right vertical, 100 mm, 4 kW 3) Left vertical, 100 mm, 4 kW 4) Upper horizontal, 165 mm, 5.5 kW - All heads adjustable up/down, left/right - Spindle diameter: 40 mm From above: - 6 driven, toothed infeed rollers (including 3 double rollers) - 2 driven outfeed rollers, smooth rubber From below: - Side pressure before and after the lower feed roller in the table - Lower infeed toothed, driven, swiveling roller in the table before the first spindle - 2 side pressure units - Driven outfeed roller, metal, smooth - All rollers pneumatically pressed - Length of infeed table: 1770 mm - Table height adjustment up/down - Central lubrication - Electric thickness adjustment - Lifting motor: 0.75 kW - Stepless feed speed adjustment - Feed motor: 3 kW - Feed via cardan shafts - Enclosed in cabin Gbedpfjykar Tex Acwsk - Extraction connection diameter: 4 x 130 mm - Dimensions (LxWxH): 3200 x 1700 x 1850 mm - Weight: 2800 kg ADVANTAGES – 4-head configuration – Ideal for wet and dry timber – Infeed toothed, driven, swiveling roller in the lower table before the first spindle – Original DTR technical documentation + CE – Used machine, excellent condition Net price: 49,900 PLN Net price: 11,880 EUR (depending on exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7479 Technical data: - shaft width: 410 mm - 4-knife shaft (TERSA) - noise reduction comb - shaft guard - table length: 2610 mm Gedpfsyit Apox Acwsbk - longer infeed table: 1435 mm - cast iron tables - both tables adjustable - original cast iron tiltable fence - brake - extraction port diameter: 115 mm - motor: 4 kW - dimensions (LxWxH): 2610x960x1110 mm - weight: 578 kg ADVANTAGES – Made in Italy – 4-knife shaft – brake – noise reduction comb – longer infeed table – unpainted – used surface planer, in very good condition, original DTR documentation Net price: 21,900 PLN Net price: 5,200 EUR (exchange rate 4.2 EUR) (Prices may change depending on significant exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 3,800 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,200 mm, spindle speed (max.): 8,000 rpm, spindle motor power: 25,000 W, number of axes: 5, This 5-axis OMAG Blade G gantry milling machine was manufactured in 2004. It features a substantial X-axis travel of 3,800 mm, Y-axis travel of 2,800 mm, and Z-axis travel of 1,200 mm. The machine is equipped with a powerful 25 kW spindle motor and a maximum saw blade diameter of 1,000 mm. If you are looking to get high-quality milling capabilities, consider the OMAG Blade G machine we have for sale. Contact us for further details. • Spindle motor: Omag 50 • C-axis: ±200° • B-axis: ±120° • Max saw blade diameter: 1,000 mm Additional equipment Gedpjyzzlwsfx Acwebk • CAD/CAM: DDX Technical Specification Taper Size ISO 40

Condition: excellent (used), Surface planer Brake motor Undervoltage release Emergency stop NEW motor Various NEW switches CE compliant Total table length: 2900 mm Infeed table length: 1550 mm Outfeed table length: 1310 mm Working width: 430 mm Gbjdpfjyrflnsx Acwsk Working height: 800 mm Cutterblock diameter: 120 mm Cutterblock speed: 5000 rpm Number of knives: 4 Knife dimensions: 430 × 35 × 3 mm Rabbeting depth: 20 mm Planer fence L × H = 1000 × 180 mm Fence tiltable up to 45 degrees Motor power: 3.2 kW, 400 V, 50 Hz Dimensions L × W × H: 2900 × 700 × 960 mm Weight: 475 kg

Condition: excellent (used), functionality: fully functional, Raimann ProfiRip KM310M Multi-blade Saw Chain width: 330 mm Maximum saw spacing: 310 mm Max. cutting height with movable saw (with pressure): 90 mm Max. cutting height with movable saw (without pressure): 105 mm Max/min saw blade diameter: 300/250 mm Passage width: up to 1000 mm Feed speed: up to 30 m/min Gedpfx Aeyzxp Hscwobk

Year of construction: 1992, condition: used, Vollmer Gedpfxjkmnyfo Acwobk Saw blade shearing machine type NS 700 Year 1992

Condition: good (used), Year of construction: 1975, Schmid saw blade sharpening machine Saw blade sharpening machine type AS 4 for circular saw blades diam.: 20 - 400 mm for circular cut-off saws up to diam.: 550 mm tooth pitch up to: 22 mm with dividing disk: 28 mm Saw blade width up to: 6.0 mm Grinding wheel diam.: 150 mm Grinding wheel speed: 3500 rpm. Infinitely variable speed control: 70 - 200 rpm. Drive power: 0.55 kW Gbedpfeq S Uwbex Acwsk - Base frame - Grinding wheel - accessories used

Condition: excellent (used), Catalogue number 7640 ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing logs, flooring boards, etc. – 2 planing cutterheads + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition TECHNICAL SPECIFICATIONS - Max planing width: 610 mm - Max planing height: 200 mm - From above: - Powered feed roller, toothed - Pawls - Pressure mechanism - 2 powered feed rollers, toothed - Pressure mechanism - 610 mm, 6-knife planing cutterhead, 15 kW - Pressure mechanisms - Smooth outfeed roller - From below: - Side pressure at infeed - Guide rail - Infeed table - Powered feed roller, toothed - 610 mm, 6-knife planing cutterhead, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear: - 2 side spindles + pressure units: 1) Right vertical spindle 200 mm, 15 kW 2) Left vertical spindle 200 mm, 15 kW - Electrically adjustable left vertical spindle (right/left) - Spindle diameter: 40 mm - Alternate spindle settings - Spindles adjustable: up/down, right/left 3) Additional lower horizontal spindle 160 mm, adjustable up/down and right/left, 5.5 kW - Spindle diameter: 35 mm Gbjdjyaq Taopfx Acwjk - At outfeed: 2 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min - Feed motor: 8 kW - Extraction port diameters: 2×120, 2x160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (depending on 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7545 TECHNICAL DATA Track width: 250mm Shaft width: 220mm Max blade diameter: 300mm Blade bore diameter: 60mm Cutting height: 100mm Table width: 650mm Table length: 1460mm – Top: 2 rows of pawls Smooth feed roller Blade shaft Smooth feed roller – Bottom: Guide rail Pawls Godpfex Uz Tujx Acwsbk Track 2 feed speed settings + stepless adjustment Central lubrication Feed motor: 1.2kW Main motor: 21kW Extraction outlet diameter: 180mm Overall dimensions (L/W/H): 1700x1450x1500mm Weight: approx. 1800kg – Made in Italy – DTR technical documentation – Robust machine – Used multi-blade saw, in very good condition Net price: 25,900 PLN Net price: 6,160 EUR depending on exchange rate 4.2 EUR (Prices may vary with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7909 Gedeynktcspfx Acwebk TECHNICAL DATA - Max. workpiece width: 230 mm - Max. workpiece height: 130 mm - 6 spindles: 1) Bottom horizontal, 230 mm, 4 kW 2) Right vertical, 130 mm 3) Left vertical, 130 mm (spindles 2 & 3), 7.5 kW 4) Top horizontal, 230 mm, pneumatically adjustable front/rear, 5.5 kW, electrically adjustable up/down 5) Bottom horizontal, 230 mm, 4 kW 6) Trimming saw, pneumatically adjustable up/down, right/left, 2.2 kW - Saw blade diameter: 160 x 40 mm - All spindles adjustable up/down, right/left - All spindles equipped with electric brake - Spindle diameter: 40 mm - From above: 4 infeed traction rollers, gear-toothed including 2 double rollers - From above: 3 outfeed traction rollers, rubber, smooth, including 1 double roller - From below: rubber traction roller, double - Feed by Cardan shaft rollers - Rollers pneumatically pressed - Infinitely variable feed speed up to 25 m/min - Feed motor: 2.2 kW - Working pressure: 6-10 bar - Electric thickness adjustment - Central table lubrication - Infeed table length: 1980 mm - Extraction port diameter: 5 x 140 mm, 1 x 80 mm - Dimensions (L x W x H): 4000 x 1800 x 1700 mm - Weight approx. 3,500 kg ADVANTAGES – German-made, WEINIG brand – 5-head configuration – Operator’s manual (DTR documentation) – 6th spindle is a pneumatically adjustable trimming saw – Planer in ideal, very good condition Net price: 53,900 PLN Net price: 12,840 EUR Net price calculated at 4.2 PLN/EUR exchange rate (Price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 6393 TECHNICAL DATA - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm - Number of spindles: 4: 1) Bottom horizontal, 200 mm, 5.5 kW 2) Right vertical, 150 mm, 4 kW 3) Left vertical, 150 mm, 4 kW 4) Top horizontal, 200 mm, 5.5 kW - All cutterheads adjustable vertically and horizontally - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm From above: - 6 feed-in traction rollers, toothed (including 2 double) - 1 feed-out traction roller, rubber-coated From below: - Feed-in drive roller, toothed, steering, integrated in lower table - 3 side pressure rollers - Feed-out traction roller, metal, smooth - All rollers pneumatically loaded - Infeed table length: 2,130 mm - Height-adjustable table - Centralized lubrication system - Electric adjustment of planing thickness - Lift motor: 1.1 kW - Stepless feed speed control via inverter - Feed drive motor: 3 kW - Feed via Cardan shafts - Fully enclosed in cabin - Extraction port diameters: 4 x 130 mm - Dimensions (LxWxH): 3,550 x 1,750 x 1,800 mm - Approx. weight: 3,000 kg Gsdoymnqcspfx Acwsbk ADVANTAGES – Equipped with 4 cutterheads – Ideal for wet and dry timber – DTR operation and maintenance manual included – Used machine, very good condition Net price: 65,900 PLN Net price: 15,690 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7914 TECHNICAL DATA - shaft width: 640mm - number of knives: 4 pcs Gedpfx Aoyrr A Hecwobk - max thickness of processed element: 250mm – top side: - anti-kickback fingers/rejectors - toothed feed roller, driven - pressure unit - planing shaft - pressure unit - smooth outfeed roller, driven – underside: - adjustable rollers in the lower table: 2 pcs - main motor: 7.5kW - electric table lift - lifting motor: 1.1kW - 2 feed speeds - feed motor: 1.3kW - dimensions (L/W/H): 1130x1300x1200mm - weight: 1026kg ADVANTAGES – made by Polish brand JAROMA – electric table height adjustment – DTR documentation provided – used thickness planer, in very good condition Net price: 16900 PLN Net price: 4030 EUR (at an exchange rate of 4.2 EUR) (Prices may change with larger rate fluctuations)

Condition: excellent (used), CATALOGUE NO. 7916 TECHNICAL DETAILS - Working width: 510 mm Gjdpfx Acjyrrruowsbk - Number of knives: 4 pcs - Max thickness of workpiece: 300 mm – From above: - Kickback pawls - Gear-driven, pull-in, oscillating feed roller - Pressure bar - Planing cutterblock - Pressure bar - Smooth, driven outfeed roller – From below: - Adjustable feed roller in the lower table, 1 pc - Motor power: 6.8 kW - Electric table lift - 4 feed speeds: 5 / 10 / 15 / 20 m/min - Extraction port diameter: 170 mm - Dimensions (L/W/H): 1120 x 1000 x 1100 mm – weight: 650 kg ADVANTAGES – Manufactured by the Italian brand CASADEI – Max planing height: 300 mm – electric table lift – One powered roller installed in the table supports machine feed – Thickness planer used, in very good condition Net price: 17,900 PLN Net price: 4,260 EUR (at a rate of 4.2 PLN/EUR) (Prices may vary depending on further currency fluctuations)

Condition: good (used), Year of construction: 2011, For sale is a used Felder jointer-thicknesser AD9-51 with a planing length of 2250 mm. The machine is in good condition and has been reconditioned and inspected by our specialist staff. Technical data: - 4-knife cutterblock system - Planing width: 510 mm - Planing length: 2250 mm - Max. clearance height: 260 mm - Variable feed gearbox - Electric thickness adjustment "PowerDrive" - Dust extraction connector Ø 140 mm - Motor power: 7.35 kW / 10 HP - Year of manufacture: 2011 Gedpfoyznqyox Acwjbk The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: jointer, thickness planer, planing machine, surfacer, thicknessing Reference: R-N2821

Condition: used, Year of construction: 1997, Beam planer 260 x 160 mm, trailing chamfer unit on the upper spindle, air cushion table with two-axis control for left and upper spindle, factory-new control system (latest Weinig version) Max. working width: 260 mm Max. working height: 160 mm Number of spindles: 6 1st spindle: bottom, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 2nd spindle: right, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm, motor power 11.0 kW (shared motor with left spindle) 3rd spindle: left, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm 4th spindle: top, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 5th spindle: bottom, spindle diameter 40 mm, motor power 11.0 kW, speed 6000 rpm, clamping length 270 mm 6th spindle: top, chamfering unit Motor brakes: mechanical Height adjustment of upper spindle: electric Optionally with/without feed Feed brake system: Yes Feed speed infinitely variable up to: 3 – 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan Lubricant pump: manual Max. planing depth: 10 mm Jointing cutter on jointer: Yes Powered rollers in table: 1 Control type: PLC control Spindle position display: mechanical numerical display Infeed rollers before jointer: Yes Air cushion table: triple track Central lubrication point: Yes Description: short infeed table 1050 mm with internal lighting Gbjdpfx Aswwwkhscwjk Location: Nattheim

Condition: new, Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), planing width: 410 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 5,000 rpm, total length of planing tables: 2,850 mm, TECHNICAL DATA Planing width 410 mm Godpfx Aoqk Ulujcwobk Feed table length 1620 mm Feed table length 1170 mm Total table length 2850 mm Cutterblock speed 5000 rpm Suction nozzle Ø 160 mm chip removal up to 8 mm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 870 kg TECHNICAL DESCRIPTION Solid German engineering For planing and jointing incl. hollow and pointed joint adjustment for planing width up to 630 mm and max. chip removal up to 8 mm Ergonomic working position directly on the cutterhead PANHANS solid steel cutterblock ø 125 mm with 4 Tersa reversible knives Finely planed machine tables, total table length 2850 mm Top control panel at eye level with digital display of chip removal, current delivery table situation (neutral, hollow or pointed joint), incl. template holder and practical tool tray Electromotive adjustment of the feed table via push-button Hollow and pointed joint adjustment on the feed table Toothed table lips for noise reduction Dressing fence Adjustable in depth and inclination via single-lever operation, inclinable up to 45°, mounted in extremely smooth-running steel guide Anodized dressing fence ruler Pivoting auxiliary fence 1545 Console for feed unit TXF 1570 bridge guard with hinged cover Mechanical motor brake Automatic star-delta start, motor protection switch Planed in at the factory CE-compliant GS tested

Condition: like new (used), Year of construction: 2025, functionality: fully functional, power: 7.5 kW (10.20 HP), tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 5,000 rpm, overall weight: 1,100 kg, *demonstration machine available at short notice TECHNICAL DATA planing width 630 mm planing height 3 - 300 mm chip removal max. 8 mm thicknessing table length 1100 mm blade shaft speed 5000 rpm motor power feed 0,55 kW / 0,8 PS / 0,75 kW / 1,0 PS suction nozzle Ø 160 mm left, right usable feed speed 7 + 14 m/min Color RAL 7035 light gray and RAL 5000 violet blue Net weight approx. 1050 kg TECHNICAL DESCRIPTION Solid German engineering For thickness planing for planing width up to 630 mm and planing height from 3 to 300 mm, compact and ergonomic machine dimensions Planed in the factory PANHANS solid steel cutterhead Ø 125 mm with 4 Tersa reversible knives Pendulum mounted feed rollers Segmented rubber infeed and outfeed rollers Ø 90 mm ensure smooth and safe workpiece infeed Gbedpfx Asfgwqajcwjk With link pressure beam Electrical height adjustment of the thicknessing table, tilt-proof on 4 trapezoidal thread spindles With finely planed thicknessing table Positioning control 4,3" touch screen Two feed speeds: 7 + 14 m/min Automatic star-delta start-up Mechanical motor brake Suction nozzle Ø 160 mm, can be used on the left or right side CE conform GS tested

Condition: like new (used), Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), planing width: 410 mm, planer shaft diameter: 100 mm, Equipment: low noise, Jointer-thickness planer ADH 5-410 *available at short notice* Demonstration machine from showroom (factory set and planed). -Spiral knife planer shaft with 66 knives (3 rows of 22 knives each) 15 x 15 x 2.5 mm --Plane width 410 mm -Working table format planer1800 x 410 mm Working table format -Thickness planer 700 x 406 mm -Planer shaft diameter100 mm -Planer blade speed 4500 rpm -Cutting depth planer max. 5 mm -Anodized planing fence Format L x W 1100 x 155 mm Gbsdpfxohm Stps Acwsk -Adjustable blade shaft guard Standard -Suction nozzle diameter 120 mm -Thickness planer width 406 mm -Thickness passage min - max 4 - 225 mm -Chip removal thickness planer max. 4 mm -Feed speed 8 m/min -Motor power 400 V / 50 Hz4.0 kW -Digital display thicknessing table adjustment standard -Space requirement L x W approx.2000 x 1000 mm -Weight approx. 450 kg -Can be driven under with pallet truck Standard -Light gray/graphite gray 7035/7024 paint finish

Condition: new, Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 5,000 rpm, total length of planing tables: 2,850 mm, TECHNICAL DATA Planing width 630 mm Feed table length 1620 mm Feed table length 1170 mm Total table length 2850 mm Cutterblock speed 5000 rpm Extraction nozzle Ø 160 mm chip removal up to 8 mm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 1400 kg TECHNICAL DESCRIPTION Solid German engineering For planing and jointing incl. hollow and pointed joint adjustment for planing width up to 630 mm and max. chip removal up to 8 mm Ergonomic working position directly on the cutterhead PANHANS solid steel cutterblock ø 125 mm with 4 Tersa reversible knives Finely planed machine tables, total table length 2850 mm Top control panel at eye level with digital display of chip removal, current delivery table situation (neutral, hollow or pointed joint), incl. template holder and practical tool tray Electromotive adjustment of the feed table via push-button Hollow and pointed joint adjustment on the feed table Toothed table lips for noise reduction Dressing fence Adjustable in depth and inclination via single-lever operation, inclinable up to 45°, mounted in extremely smooth-running steel guide Gjdjqffvgspfx Acwobk Anodized dressing fence ruler Pivoting auxiliary fence 1545 Console for feed unit TXF 1570 bridge guard with hinged cover Mechanical motor brake Automatic star-delta start, motor protection switch Planed in at the factory CE-compliant GS tested