Used Pistol for sale (65)

Condition: good (used), Air gun, 2-component gun, multi-function gun, cartridge gun The TS460 XH compressed air gun is designed for 490 ml side-by-side cartridges. It is suitable for applying two-component adhesives and sealants. -for 2K adhesives and 2K sealants -Propulsion: via compressed air -Weight: 2.3 kg Iodpfxeb A Rxue Afkoth

Condition: used, 48EPE150D4, Cleco, pistol screwdriver Ijdpevrggcefx Afketh Model: 48EPE150D4 Condition: Used

Condition: like new (used), functionality: fully functional, Year of construction: 2008, operating hours: 1 h, machine/vehicle number: 6151922015, From our demonstration tool inventory, tested and fully functional: Used Chicago Pneumatic Redi Power RP2015 pneumatic pistol screwdriver with shut off clutch with trigger start Output: Hex 1/4" Torque: 2.0 to 5.5 Nm / 18 - 49 in.lb Idle speed: 1470 min-1 Length: 200 mm Weight: 1.0 kg Itedpfev Im Ncsx Afksh Other tools for industrial production and maintenance on request.

Year of construction: 2017, operating hours: 3 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2051476364, From our demonstration tool inventory, tested and fully functional: Used Desoutter SDT035-T2200-R4Q pneumatic pistol screwdriver Itedpfx Aov Imyuefksh with ratchet clutch with trigger start Output: Hex 1/4" Torque: 1.0 to 3.5 Nm / 8.9 - 31 in.lb Idle speed: 2200 min-1 Length: 212 mm Weight: 1.1 kg Other tools for industrial production and maintenance on request.

Condition: excellent (used), 2-component gun, multi-function gun, cartridge gun, cartridge press, double cartridge dispensing gun, 2K mixing gun Itsdpfsu Aigkox Afksh -Manufacturer: Plunger, Dual Cartridge Dispensing Gun Mixpac Strap Kit -Quantity: 1x cartridge gun available -Price: per piece -Dimensions: 300/210/H85 mm -Weight: 1.2 kg

Condition: ready for operation (used), Year of construction: 2016, operating hours: 1,963 h, travel distance X-axis: 735 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: 840D sl Operate, overall weight: 11,800 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 21,000 W, number of axes: 5, This 5-axis DMG MORI DMU 65 monoBLOCK was manufactured in 2016. It features an impressive X-axis travel of 735 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine is equipped with a powerful spindle speed of 15,000 rpm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 65 monoBLOCK vertical machining centre we have for sale. Contact us for further details. • Spindle: power 21 kW (40% ED) / 16 kW (100% ED); torque 111 Nm (40% ED); pull stud DIN 69872 • Table: Rotary table (C-axis) Ø650 mm integrated in rigid table 800 x 650 mm • Swivel/rotary axes: A-axis +120° / -120° from 0°; C-axis 360°; A-axis torque/holding 3,400 Nm (100% ED); A-axis hydraulic clamping holding torque 6,200 Nm; C-axis torque/holding 2,000 Nm (100% ED) • Feed/rapid: Rapid traverse X/Y/Z 40 m/min; max feed X/Y/Z 40,000 mm/min; max feed force X 7 kN, Y 13 kN, Z 10 kN (all 100% ED) • Guideways: Roller linear guides on all linear axes • Measuring system: Direct, absolute, 0.001 mm resolution, magnetic (for Siemens) • Control: CELOS with Siemens 840D sl Operate, 21.5" ERGOline multi-touch • Tool changer/magazine: Automatic with double gripper (vertical); 30-position HSK-A 63 chain magazine • Coolant/swarf standard: Chip tray with integrated 500 L tank; standard swarf management via chip tray • Condition: Excellent; only 1,963 spindle hours (machine was used only for making of prototypes) Additional equipment • Production package (P-K0398): Chip conveyor with coolant tank, paper band filter, internal coolant through spindle (IKZ) 40 bar / 23 l/min, external coolant 4 bar / 40 l/min, door flushing • Tool interface (P-M0039): Tool taper adaptation for HSK-A63 (DIN 69893) • Swarf wash pistol (P-G0004): 2 bar / 40 l/min • Measuring probe (P-K0263): Heidenhain TS 649 infrared touch probe • Tool measuring system (P-K0405): Blum laser for vertical tool length and diameter measurement • Kinematics option (P-K0224): 3D quickSET toolkit for checking/correcting 4/5-axis configuration • Operation Mode 4 (P-H0038): Manual intervention in work area with open doors under controlled process • Electronic handwheel (P-H0109): Siemens 840D Technical Specification Taper Size HSK 63 Through-spindle Coolant Yes Itedpfx Aszd T Sfjfksh

Condition: new, Year of construction: 2025, The NQ50 is an efficient and precise horizontal machining center. It is suitable for machining a variety of materials and components in the automotive industry, tool and die making, and the IT sector. To meet production requirements regarding high precision, efficiency, and speed, an automated production line can be configured. The design concept of standardization, modularization, and universality provides the machine tool with outstanding technological advancement and future-proofing, offering excellent value for money. Features: - Compact structure with a small footprint - High rigidity, excellent dynamic characteristics, and superior precision retention - High-performance spindle for improved cutting capability and machining accuracy - Grease lubrication system for energy efficiency and environmental compatibility - Integrated automation interfaces - Cooling of the hollow ball screw on all three axes ensures high stability in serial parts production Travels: - X-axis travel: 730 mm - Y-axis travel: 730 mm - Z-axis travel: 800 mm - Control: FANUC 0i - Spindle center–table surface: 80 – 810 mm - Spindle nose–table: 70 – 870 mm Table: - Table size: 500 x 500 mm - Max. workpiece weight: 500 kg - Pallet indexing: 1° x 360° - Pallet changer system: Rotary design - Number of pallets: 2 - Pallet change time: 1.4 sec Spindle: - Spindle type: Built-in spindle - Max. speed: 12,000 rpm - Spindle power: 18.5/37 kW - Spindle torque: 95.5/250 Nm - Spindle taper: BT40 - Pull stud: P40T-I-MAS403 Feed Drives: - Rapid traverse X/Y/Z: 60 m/min - Cutting feed X/Y/Z: 60 m/min Tool Magazine: - Capacity: 40 tools - Pull stud: P40T-I-MAS403 - Max. tool diameter: 80 mm - Max. tool diameter (adjacent slots free): 160 mm - Max. tool length: 500 mm - Max. tool weight: 12 kg - Tool-to-tool indexing: 1.5 sec Other Specifications: - Power supply: 45 kVA - Machine weight: 13 t - Installation area (LxWxH): 6450x3150x3250 mm Standard Configurations: - FANUC 0i control - 40-position tool changer (NQ80 60T) - 1° pallet indexing (except HQ100D) - NC rotary table 0.001° (NQ100D) - 40-tool changer - APC automatic pallet changer - Pneumatic and hydraulic lubrication system - Spindle oil cooler - Spindle blow-out system - Coolant system - Ball screw oil cooling - Guideway protection - Chip conveyor, chain type - Three-color signal tower, work light - Automatic shutdown - Self-diagnosis system - Full enclosure - Standard accessories: - Tool box - CE Options: - SIEMENS 828D control - 0.001° pallet indexing (standard on NQ100D) - T-slot table - CTS (coolant through spindle) pressure boost 20/30/70 bar - Control cabinet air conditioning unit - Linear scales - Workpiece measurement Itodpfx Asw Rpgysfkoh - Air blow pistol - Niagara rinsing

Condition: used, Year of construction: 2001, controller manufacturer: Heidenhain, controller model: MillPlus, _____ Description: Year of manuf. : 2001 Control : Heidenhain MillPlus Speed : 18000 rpm Movement X/Y/Z : 630/560/560 mm Tool holder : SK 40 Spindle: Technology:Motorspindle Speed:18.000 rpm Power (max.):35 kW Torque (max.):119 Nm Taper:SK40 Workingtable: Clamping surface:1.000 x 600 mm Tableloading (max.):400 kg In general: Toolmagazine:2x 10 stations Rapid travers in X/Y/Z:26/26/20 m/min Equipment/Accessory: Iodjzbzchjpfx Afkjth Chipmanagement:Chiptrumpet Coolingmanagement:Cooling unit Oilmistseparation:Mechanical extraction, Hör AFS 1100 4.-Axis:Magerl Rotomatik 120 with Counterbearing Processobservation:Operation mode 4 Setup operations:Electronical handwheel Further Equipment:Spindlechiller, Rinsing pistol Further Accessory:Misc. used Toolholder SK 40

Condition: used, Year of construction: 1999, controller manufacturer: Heidenhain, controller model: MillPlus, _____ Description: Year of manuf. : 1999 Control : Heidenhain MillPlus Speed : 12000 rpm Movement X/Y/Z : 800/650/550 mm Itsdpfjzbzcbox Afkjh Spindle: Technology:Motorspindle Speed:12.000 rpm Power (max.):15 kW Torque (max.):130 Nm Taper:SK40 Workingtable: Clamping surface:1.100 x 650 mm Tableloading (max.):600 kg In general: Toolmagazine:25 stations Rapid travers in X/Y/Z:18/18/15 m/min Equipment/Accessory: Chipmanagement:Chip tray Coolingmanagement:Coolant pump Oilmistseparation:Electrostatic extraction, W+W EL-FI 1000 Further Equipment:Rinsing pistol Further Accessory:Misc. used Toolholder SK 40

Condition: excellent (used), Year of construction: 2022, Manufacturer: Ganner Gannomat Type: SELEKTA 253 220 V, 1 phase, 50 Hz Year of manufacture: 2022 - used Complete in standard version with: - Fully automatic electronic control system with program selector switch COILING-GLUING-DRIVING IN - Dowel feed via electronic vibrating conveyor with potentiometer for stepless adjustment of the dowel feed rate - Automatic dowel diameter and dowel length control with Auto-DL-Select system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) - Closed gluing system with 6 bar glue pressure via glue nozzle for glues with a viscosity of 150 to 350 mPas - Stepless electronic glue quantity adjustment with potentiometer via Iodpfx Aezbyu Aofkoth time preselection by electronic control - Selector switch GLUE/WATER for flushing/cleaning the gluing system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and dirty water collection container) - Control lamp for glue residue level indicator in the glue container - 1 stainless steel container for 5 kg of glue and 1 stainless steel container for 5 l of water for flushing/cleaning - 4 rollers for moving the machine including 1 pistol for dowels Ø 8 mm, dowel length 25 - 40 mm Drive-in overhang 7 - 20 mm Air connection: 6 bar Price ex warehouse 54634 Bitburg - immediately available -

Condition: used, mileage: 40,280 km, power: 220 kW (299.12 HP), first registration: 12/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 12/2025, color: silver, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space volume: 39 m³, loading space length: 6,440 mm, loading space width: 2,441 mm, loading space height: 2,500 mm, Equipment: air conditioning, navigation system, 1. Cab & Interior * ClassicSpace cab, 2.30 m wide, 320 mm engine tunnel * Comfort cab suspension, steel-sprung * Comfort air-suspended driver's seat * Functional passenger seat * Velour seat covers (driver + passenger + center seat) * Side sun blind (driver's side) * Rubber floor mats for driver/passenger * Storage compartment lids, driver/passenger side * Low storage tray on engine tunnel * Roof hatch / ventilation flap * Interior color: Greige/Anthracite * Cab rear wall without window * External storage hatch left * A-pillar trim * Central locking with comfort closing system ----2. Engine & Drive * Engine OM936, R6, 7.7 l, 220 kW (299 hp), 1200 Nm * Euro VI, Step E * High Performance Engine Brake * Front air intake * Two-stage, consumption-optimized air compressor * Transmission G211-12 PowerShift 3 / PowerShift Advanced * Single-disc clutch * Axle ratio i = 3.077 ----3. Chassis & Axles Itsdpfxoyl Hatj Afkoh * Front axle 8.0 t, air-suspended * Rear axle 13.0 t, hypoid crown wheel 440 * Steering system, single circuit, direct * Non-regulated power steering pump * Power steering oil cooling ----4. Brakes & Safety * Disc brakes FA + RA * Electronic Braking System (EBS) with ABS & ASR * Electronic parking brake * Electronic Stability Program (ESP) * Lane Keeping Assist * Attention Assist * Traffic Sign Assist * Active Brake Assist 5 * Speed limiter 90 km/h * Cruise control ----5. Electrical & Electronics * Batteries 2× 12V / 220Ah * Hella battery sensor * Alternator 28V / 100A * Circuit breakers * 12V & 24V sockets in passenger footwell * Additional functions for bodywork * Switches for external body electrics (No. 1 & No. 2) * Remote cable control for air suspension * Navigation system * Interactive multimedia cockpit * 2-way speaker system * Truck Data Center 7 * FleetBoard, Truck App Portal, toll recording * Axle load measurement system * Remote Online ----6. Lighting & Visibility * LED daytime running lights * Automatic main/dipped beam and cornering light * Halogen fog lamps * LED indicators in light signature * Flashing side marker lights * 2 LED work lights at bottom (right/left) * Tinted windscreen * Main mirror with maneuvering position (passenger side) * Heated front mirror * External transparent sun visor * Air horn ----7. Tanks & Exhaust System * Main tank 290 l aluminum, left * AdBlue tank 60 l, left * Exhaust system right, tailpipe facing inside ----8. Frame & Body * High-strength frame, U-profile, perforated grid 50×50 mm * Frame overhang 2100 mm * Mounting parts for flatbed * Bolted frame * Rear underride guard (ECE) * Front underride guard (ECE), aluminum * Rear axle mudguard 2500 mm * 3-piece mudguard with EC spray protection * Front spray protection * Compressed air pistol with hose * Wheel chock + holder ----9. Trailer & Coupling * 2-line trailer brake * Rockinger D40 trailer coupling * Upper hand lever for coupling * 24V, 15-pin trailer socket ----10. Other Features & Codes * Predictive Powertrain Control * Economy/Power driving modes ----11. 1st Floor Finkl Livestock Body * Fan * Ventilation flaps * Feed flap * 1 large livestock partition * Storage boxes * Dimensions inside (LxWxH): 6440 x 2441 x 2500 mm * Loading volume: 39 m³ ----- * Tyre size FA: 315/70R22.5 * Tyre size RA: 315/70R22.5 * Fuel tank: 290 ltr. * AdBlue tank: 60 ltr. * Technical gross weight: 20500 kg * Unladen weight: 8836 kg * Permissible trailer load: 16600 kg * Total length: 8700 mm * Wheelbase: 4900 mm * SP due: expired ----Vehicle number: 8359---- Errors and prior sa

Condition: used, maximum load weight: 27,920 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 04/2027, Fifth wheel height: 1,150 mm. Hydraulic system: 110 l/min, 225 bar, connections on front wall: 1'' male screw pressure line, 1'' female screw return line. BPW On Road Eco Air axles, 1st axle liftable, EBS 2S/2M KNORR, JOST steel landing legs, fully enclosed side underrun protection painted RAL 9005 black. Two LED work lights behind the third axle and in front of the support legs, one LED work light inside. Steel wheels with black wheel hubs, 6 kg fire extinguisher, 3-metre ladder, radio remote control for floor functions, bracket for shovel and broom, two toolboxes mounted on the overhang, 15-metre air hose with hydraulic reel and pistol, self-supporting chassis 4,400 mm, aluminium body 3/2 mm. Catwalk at front wall with two ladders, door in front wall left with ladder, 10 mm floor type, aluminium movable side wall with tarpaulin (3,800 g) and rail sweeper, rear doors each with two integrated 18 mm locking rods, reinforced door sealing, rear upper cross member unlockable on right side by pin, pneumatic door unlocking, roof roll tarpaulin, black (650 g), with side reinforcement (200 g over 600 mm), twelve pairs of lashing rings, wear plates on rear side walls (3 x 1.5 m), black integrated lashing straps in side wall with stainless steel ratchets, left side protection tarpaulin RAL7038. Iodpfxjyw Dxxe Afkjth

Condition: used, mileage: 94,000 km, power: 375 kW (509.86 HP), first registration: 10/2016, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, wheelbase: 4,600 mm, color: orange, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, central locking, compressor, differential lock, electronic stability program (ESP), fog lights, navigation system, parking heater, soot filter, traction control, Double cab, central lubrication system, EBS, single owner, green emissions badge (category 4), reversing camera, electric windows, radio/CD, electrically adjustable exterior mirrors, speed limiter, adaptive cruise control, new general inspection / emissions test, diesel automatic, climate control, Euro 6, L package, green emissions badge 4, axles: 4, wheelbase: 460 cm, drivetrain configuration: 8x4 Tridem, last axle liftable and steerable, long-distance driver’s cab, large FMX cab with air conditioning, camera, differential lock, hydraulic system, tipper hydraulics, ABS, adaptive cruise control, EBS, ESP, compressor, navigation system, 2 remote controls, retarder/interder, auxiliary heating, aluminium fuel tank, brake booster, double fuel tank, electric windows, electrically adjustable exterior mirrors, speed limiter, fridge, air suspension, air horn, fog lights, particulate filter, radio/CD, rear view camera, sun visor, spoiler, toolbox, PTO (power take-off), centralized lubrication, central locking. MTS Dino 5 suction excavator Type 4A14 T 36,000 V, dual turbine Powerboom with rotary head, central lubrication, extra high-pressure pump unit with hoses and pistol, extra air valves at the rear of the truck for operating pneumatic tools such as a hammer, compressor hours: 3,790, fan hours: 3,512, MTS serviced, Volvo service book, garage vehicle, single owner, major overhaul for €31,000. Permissible gross weight: 32,000 kg. FOR US, CONDITION AND OUR GUT FEELING ARE DECISIVE – PRICE IS SECONDARY. For further questions, please contact Mr. Faller at the following number. Iedpfevic A Usx Afkoth *TRADE-IN, PURCHASE, OR FINANCING OF YOUR VEHICLE POSSIBLE!* All information provided without guarantee. More offers can be found on our homepage. The description and stated data do not constitute a guarantee and are not binding. The binding agreement is the purchase contract concluded at the dealership when purchasing the vehicle. Subject to errors and prior sale.

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 600 kg, total height: 2,665 mm, total length: 2,440 mm, total width: 1,900 mm, table width: 790 mm, table length: 560 mm, table load: 600 kg, overall weight: 4,200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 6,651 h, coolant supply: 20 bar, spindle nose: SK40 (DIN69871), number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, A very well-equipped DMG Deckel Maho DMC 635 V with relatively low spindle hours. The machine is connected to power and can be seen in operation by appointment. Additional options & accessories: - Operation mode 4 - Internal cooling – 20 bar - Band filter system – 600L - Chip conveyor - Electronic handwheel - Original accordion cabin roof - Rinsing pistol - Approx. 30 pcs. SK40 tool holders (incl. 3D probe) - All original documentation Weight & dimensions: 4,200 kg 2440 (3500 incl. PLC) x 1900 x 2665 mm (LxWxH) Iodpfxjy E N Dcj Afkoth

Condition: new, saw blade diameter 400 mm Number of revolutions 3000 r.p.m hole of sawblade 32 mm sawblade width 4 mm Control NC total power requirement 1,5-2 kW weight of the machine ca. 162 kg required space 740 x 780 x 1350 mm The Gerd Wolff AC 400 is an automatic aluminium cutting machine which is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Standard Accessories -BLocation points for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for different types of profile - Saw covering with safety switch - Belt propulsion saw - Two hand safety operation - Easy to change saw blade - 2 x Pneumatic vertical piston with clamps - 1 x compressed air pistol Itsdpfx Aoy S Dwwofksh Optional Equipment - Hydrocheck – Hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers

Condition: new, Year of construction: 2024, functionality: fully functional, niverzálny pneumatický stôl PT-2800 sa vyznačuje nastaviteľnou pracovnou doskou, pneumatickým upínaním podporných prvkov (bloky alebo nosníky) a pneumatickým zdvihom palety smerom k operátorovi. Je nastaviteľný, poloautomatický stôl na pribíjanie paliet pre palety rôznych veľkostí. Jeho ergonomická konštrukcia umožňuje rýchle a jednoduché nastavenie veľkosti šablóny palety. Dĺžky sa môžu líšiť 900 – 2800 mm a stôl podporuje šírky maximálne do 1500 mm. Len jeden operátor je potrebný na výrobu 180 – 210 paliet počas jednej 8-hodinovej pracovnej zmeny. Operátor používa viacero nastreľovacích pištolí pre rôzne veľkosti klincov. Každá z nastreľovacích pištolí je pre pohodlie operátora zavesená na hornej valčekovej dráhe. Valčeková dráha umožňuje voľný pohyb nastreľovacích pištolí pozdĺž montážneho systému koľajníc nad hlavou. Konštrukcia stola zaručuje efektivitu výroby ako aj komfort obsluhy. Technické špecifikácie: Hmotnosť: 530 kg Prevádzkový tlak: do 8 bar Materiál: konštrukčná oceľ Rozmery paliet: Dĺžka: 900 – 2800 mm Šírka: 1500 mm Vonkajšie rozmery: Šírka pracovnej dosky: 3210 mm Šírka stola vrátane koľajnicového montážneho systému pre balancery: 4082 mm Výška pracovnej dosky: 1829 mm Výška stola vrátane koľajnicového montážneho systému pre balancery: 2697 mm Výhody: Jednoduché použitie – Jeden operátor dokáže postaviť 180 – 210 paliet za 8 hodín Kompaktný dizajn – Celková plocha 4,94 m² Univerzálna nastaviteľná pracovná doska umožňuje výrobu: Blokové palety (vrátane EUR paliet) do 15 blokov Ijdpfx Ajqwnv Nofkjth Palety na 2, 3, 4 alebo 5 koľajniciach Efektivita – Rýchlo prepnite na paletu akejkoľvek veľkosti Pneumatická svorka – Ľahko vycentruje bloky Pneumatický zdvih – Zdvíha paletu, aby sa minimalizovalo zdvíhanie operátora Horná valčeková dráha – Nastreľovacie pištole sa môžu počas práce voľne pohybovať Spodná šablóna – Šablóna na zostavenie nožičiek palety Nastaviteľné oceľové klinčovacie platne – Pozinkované a kalené oceľové platne na klincovacie klince Jedinečnosť: Nastavenie diagonálneho stola znižuje prácu o 50 % Možnosť zostavenia paliet CP1, CP2, CP3, CP4, CP5 Na nastavenie stola sú potrebné iba 2 imbusové kľúče

Condition: new, Year of construction: 2024, total width: 13,910 mm, total height: 25,810 mm, total length: 31,220 mm, compressed air connection: 8 bar, warranty duration: 1 months, overall weight: 440 kg, working width: 1,900 mm, working height: 1,300 mm, Univerzálny pneumatický stôl PT-1900 sa vyznačuje nastaviteľnou pracovnou doskou, pneumatickým upínaním podporných prvkov (bloky alebo nosníky) a pneumatickým zdvihom palety smerom k operátorovi. Je nastaviteľný, poloautomatický stôl na pribíjanie paliet pre palety rôznych veľkostí. Jeho ergonomická konštrukcia umožňuje rýchle a jednoduché nastavenie veľkosti šablóny palety. Dĺžky sa môžu líšiť 800 – 1900 mm a stôl podporuje šírky maximálne do 1300 mm. Len jeden operátor je potrebný na výrobu 210 – 230 paliet počas jednej 8-hodinovej pracovnej zmeny. Operátor používa viacero nastreľovacích pištolí pre rôzne veľkosti klincov. Každá z nastreľovacích pištolí je pre pohodlie operátora zavesená na hornej valčekovej dráhe. Valčeková dráha umožňuje voľný pohyb nastreľovacích pištolí pozdĺž montážneho systému koľajníc nad hlavou. Konštrukcia stola zaručuje efektivitu výroby ako aj komfort obsluhy. Itjdpeqcvvgefx Afkeh Technické špecifikácie: Hmotnosť: 440 kg Prevádzkový tlak: do 8 bar Materiál: konštrukčná oceľ Rozmery paliet: Dĺžka: 800 – 1900 mm Šírka: 1300 mm Vonkajšie rozmery: Šírka pracovnej dosky: 2250 mm Šírka stola vrátane koľajnicového montážneho systému pre balancery: 3122 mm Výška pracovnej dosky: 1627 mm Výška stola vrátane koľajnicového montážneho systému pre balancery: 2581 mm Výhody: Jednoduché použitie – Jeden operátor dokáže postaviť 210 – 230 paliet za 8 hodín Kompaktný dizajn – Celková plocha 3,3 m² Univerzálna nastaviteľná pracovná doska umožňuje výrobu: Blokové palety (vrátane EUR paliet) do 9 blokov Palety na 2, 3, 4 alebo 5 koľajniciach Efektivita – Rýchlo prepnite na paletu akejkoľvek veľkosti Pneumatická svorka – Ľahko vycentruje bloky Pneumatický zdvih – Zdvíha paletu, aby sa minimalizovalo zdvíhanie operátora Horná valčeková dráha – Nastreľovacie pištole sa môžu počas práce voľne pohybovať Spodná šablóna – Šablóna na zostavenie nožičiek palety Nastaviteľné oceľové klinčovacie platne – Pozinkované a kalené oceľové platne na klincovacie klince Jedinečnosť: Nastavenie diagonálneho stola znižuje prácu o 50 % Možnosť zostavenia paliet CP1, CP2, CP3, CP4, CP5 Na nastavenie stola sú potrebné iba 2 imbusové kľúče

Condition: new, Year of construction: 2023, Popis Univerzálny pneumatický stôl PT-3300 sa vyznačuje nastaviteľnou pracovnou doskou, pneumatickým upínaním podporných prvkov (bloky alebo nosníky) a pneumatickým zdvihom palety smerom k operátorovi. Je nastaviteľný, poloautomatický stôl na pribíjanie paliet pre palety rôznych veľkostí. Jeho ergonomická konštrukcia umožňuje rýchle a jednoduché nastavenie veľkosti šablóny palety. Dĺžky sa môžu líšiť 900 – 3300 mm a stôl podporuje šírky maximálne do 1500 mm. Len jeden operátor je potrebný na výrobu 170 – 200 paliet počas jednej 8-hodinovej pracovnej zmeny. Iodpfjqwnxgsx Afkjth Operátor používa viacero nastreľovacích pištolí pre rôzne veľkosti klincov. Každá z nastreľovacích pištolí je pre pohodlie operátora zavesená na hornej valčekovej dráhe. Valčeková dráha umožňuje voľný pohyb nastreľovacích pištolí pozdĺž montážneho systému koľajníc nad hlavou. Konštrukcia stola zaručuje efektivitu výroby ako aj komfort obsluhy. Technické špecifikácie: Hmotnosť: 620 kg Prevádzkový tlak: do 8 bar Materiál: konštrukčná oceľ Rozmery paliet: Dĺžka: 900 – 3300 mm Šírka: 1500 mm Vonkajšie rozmery: Šírka pracovnej dosky: 3710 mm Šírka stola vrátane koľajnicového montážneho systému pre balancery: 4582 mm Výška pracovnej dosky: 1829 mm Výška stola vrátane koľajnicového montážneho systému pre balancery: 2697 mm Výhody: Jednoduché použitie – Jeden operátor dokáže postaviť 170 – 200 paliet za 8 hodín Kompaktný dizajn – Celková plocha 5,37 m² Univerzálna nastaviteľná pracovná doska umožňuje výrobu: Blokové palety (vrátane EUR paliet) do 15 blokov Palety na 2, 3, 4 alebo 5 koľajniciach Efektivita – Rýchlo prepnite na paletu akejkoľvek veľkosti Pneumatická svorka – Ľahko vycentruje bloky Pneumatický zdvih – Zdvíha paletu, aby sa minimalizovalo zdvíhanie operátora Horná valčeková dráha – Nastreľovacie pištole sa môžu počas práce voľne pohybovať Spodná šablóna – Šablóna na zostavenie nožičiek palety Nastaviteľné oceľové klinčovacie platne – Pozinkované a kalené oceľové platne na klincovacie klince Jedinečnosť: Nastavenie diagonálneho stola znižuje prácu o 50 % Možnosť zostavenia paliet CP1, CP2, CP3, CP4, CP5 Na nastavenie stola sú potrebné iba 2 imbusové kľúče

Condition: good (used), Year of construction: 2022, machine/vehicle number: 25666, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Iedpfsy Tybzjx Afkoth Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25667, Equipped with: Hydraulic Unit Itodpfx Aey Tybnefkoh Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Year of construction: 2020, condition: new, Automation Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipme Array of guns Vertical 8pcs. pistols Control - profiControl 10 " Cyclone - CK-D1250 Dust collector - OZ-8H Center - RP-01 + SV-200 MA1-23 x 2 pcs manipulator Os X MX-100 x2 pcs. Horizontal goal - Horizontal goal W400 x2 items Vertical gate - H2000 vertical gate The maximum painting speed is 1,65714285714286m / min 0 piece pulling machines Pow. requires 10188m3 / h to fly Required min. cabin passage W900mm H2100mm Itedsflq Spopfx Afksh Pipe diameter 500mm - 16.9m / s minimum 16m / s Air consumption 1210 L / min + Sug. SC-20 compressor Min.current connection 28.14 kW Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished. Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off. Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators. The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns.

Condition: used, Year of construction: 2012, x-travel 850 mm y-travel 700 mm z-travel 500 mm Control Siemens 840 D rotary table 800 mm c-axis 0.001º ( ±360º) 0 B-axis (table) º mm Iedpfsyxy E Rjx Afketh number of spindle speeds 18.000 U/min/rpm tool taper HSK 63 Tools changer 38 fach/tools Internal cooling system 80 bar total power requirement 43 kVA weight of the machine ca. 10,6 t Equipment- Paper belt filter – 200 l tank- Active control cabinet cooling- Infrared probe M&H (Heidenhain)- Laser tool measuring system Blum- Chip conveyor- Cleaning pistol with pump 2 bar / 40 l min- 3D Quick Set- Electronic handwheel

Condition: used, Year of construction: 2019, Suitable for the automatic grinding of HM circular saw blades on the face and top in one setting. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass. Accessories: Total enclosure, Coolant system, Equipment for robot operation with automatic loading door ND 230 loader Measuring device for measuring saw blades Chip breaker grinding attachment Stepless variable grinding speed of the two grinding spindles from 1600 to 5500 rpm. Grinding speed and grinding path stepless adjustable for each machining surface on the tooth. Automatic central lubrication Software package for oscillation grinding at rake and clearance angles Automatic shut-off flap Automatic fire extinguishing system Electrostatic oil mist separator N281 Measuring tool Sawblade holder with guide bushing Ø 16 mm Saw holder >ø180 Sawblade holder with guide bushing Ø 16 mm Saw holder >ø320 Grinding wheel mounting flange for chip breaker Centering ring for mounting bolt Ø 16 mm for saw bore Ø 32 mm Centering ring for mounting bolt Ø 16 mm for saw bore Ø 40 mm Centering bolt Ø 10 mm Machine light Sawblade blow-off pistol Data input station DES 400 3 loading trolleys with 30 mm mandrels Oil drip tray Automatic central lubrication. Saw blade diameter: 200 - 840 mm Bore diameter: from 16 mm Sheet thickness: up to 15 mm Tooth pitch: from 6 to 180 mm Cutting length: up to 25 mm Rake angle: from - 35 ° to + 20 ° Clearance angle: 0 ° - 25 ° Angled grinding on the back of the tooth: up to 45 ° Angled grinding on the tooth face: up to 30 ° Angled grinding on the negative tooth face: up to 30 ° Tooth height difference: any Grinding wheel diameter: Max. 200 x 32 mm Itedpfx Aeyvgf Dofksh Dimensions W x D x H: 2770 x 1900 x 2058 mm Weight: 4700 kg Connected load: 8.7 kVA (400 V / 50 Hz) colour: gray RAL 7045 / gray RAL 7047

Condition: as good as new (ex-display), Year of construction: 2026, Ultrasonic Cleaning System ULTRA300 Usable platform dimensions: 1,050 x 550 mm Maximum usable height: 450 mm Maximum load weight: 300 kg Volume: 585 liters + 70 liters (oil separator) = 655 liters Heating: 2 x 6 kW Completely constructed from stainless steel Thermally and acoustically insulated External dimensions approx.: L 1,700 x W 1,050 x H 2,000 mm Control system manufacturer: Fatek, HMI manufacturer: Weintek Electrical power requirement: 15 kW Includes: Iedpfx Asxuzyfjfksth - Automatic pneumatic goods lift - Surface spray/rinse and oil separator for bath maintenance - Ultrasonic submersible transducers with dual-side sonication - Output: 3,000 W effective / 6,000 W peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off pistol Demonstration unit from the Glogar Technology Center, available immediately

Condition: ready for operation (used), Year of construction: 2018, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, total height: 2,060 mm, total width: 2,800 mm, overall weight: 6,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, product length (max.): 3,450 mm, number of axes: 4, This 4-axis EMCO EMCOTURN E65 was manufactured in 2018. It features a maximum machining diameter of Ø500 mm and a maximum machining length of 520 mm. The machine is equipped with a Siemens SINUMERIK 828D control system and offers driven tools for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the EMCO EMCOTURN E65 turn-mill centre we have for sale. Contact us for further details regarding this machine. • Work area: • Swing over bed: Ø610 mm • Swing over cross slide: Ø360 mm • Distance between centers: 682 mm • Distance between spindle noses: 840 mm • Max. machining diameter: Ø500 mm • Max. machining length: 520 mm • Max. bar capacity: Ø65 mm • Main spindle (belt driven): • Torque (40% DC): 305 Nm • Spindle nose: A2-6 • Bearing Ø: 105 mm • Spindle bore: Ø73 mm • Max. chuck size: Ø250 mm • Counter spindle: • Speed: 60–5000 rpm • Power (40% DC): 11 / 16.5 kW • Torque (40% DC): 80 / 125 Nm • Spindle nose: A2-6 • Spindle bore: Ø73 mm • Max. chuck: Ø200 mm • C-axis: • Resolution: 0.001° • Rapid speed: 100 rpm • Turret (VDI30): • Tool stations: 12 • Driven tools: yes • Max. speed: 5000 rpm • Max. power: 6.7 kW • Max. torque: 25 Nm • Indexing time: 0.2 s • Rotary tools (VDI30): • Speed: 0–5000 rpm • Torque: 25 Nm • Power: 6.7 kW • Feed drives: • Rapid traverse (X/Y/Z): 30 / 15 / 30 m/min • Feed thrust X: 5000 N • Feed thrust Z: 7000 N • Acceleration: 0.4 m/s² • Tailstock: • Travel: 500 mm • Force: 8000 N • Taper: MT4 • Coolant system: • Tank capacity: 230 l • Pump power: 0.57 / 2.2 kW • Pressure: 3.5 bar (optional 14 bar) • Flow rate: 15 / 65 l/min • Hydraulic unit: • Tank: 10 l • Max. pressure: 50 bar • Pneumatics: • Pressure: 6 bar • Air consumption: 5 l/min • Power supply: • Voltage: 3x400V Ijdpfx Aoy Enr Eefkjth • Frequency: 50/60 Hz • Connected load: 25 / 39 kVA • Noise level: • Average: 75 dB(A) • Key features: • C-axis main spindle • Driven tools • Hydraulic tailstock • ShopTurn programming • USB + Ethernet • 15" touchscreen + 3D simulation • CE documentation Additional equipment • Bar feeder: EMCO SL1200 • Bar diameter: 8–95 mm • Bar length: 150–1200 mm • Feed rate: 60 m/min • Capacity: 10 bars Ø55 mm / 70 bars Ø8 mm • Weight: ~500 kg • Collet chuck: HAINBUCH BZI 100 (A2-8) • Max. capacity: Ø100 mm • Incl. part stop • Max. speed: 5000 rpm • Parts catcher: • Max. length: 175 mm • Max. diameter: 65 mm (optional 95 mm) • Max. weight: 4.5 kg • Chip conveyor: • Length: 1200 mm • Suitable for: long chips, snarled chips, dry & wet machining • Coolant pistol (Multiflow): • Adjustable jet + solenoid valve • Magnetic holder + spiral hose Technical Specification Taper Size VDI 30 Counter Spindle Yes Driven Tools Yes